Diagrammes de phases des systemes binaires KNO3-CsNO3 et KNO3-NaNO3

(K?Na)NO₃ and (K?Cs)NO₃ phase diagrams were drawn using a simultaneous thermal analysis technique in the range 373 to 623 K. The first phase diagram shows a minimum freezing equimolar mixture at 494 K, a continuous solid solution in equilibrum with liquid phase and an eutectic mixture (88 molar % of KNO₃) at 380 K. The second one exhibits an invariant at 400 K corresponding to the KNO₃ solid-solid transition, an eutectoid mixture at 10 molar % of KNO₃ and 418 K involving the CsNO₃ solid-solid transition and an eutectic mixture at 60 molar % of KNO₃ and 495 K.     

Phase Diagram and Phase Transitions in the Relaxor Ferroelectric Pb(Fe2/3W1/3)O3-PbTiO3 System

A complete solid solution between relaxor ferroelectric Pb(Fe_2/3W_1/3)O₃ (PFW) and ferroelectric PbTiO₃ (PT), (1−x)PFW-xPT, was synthesized by a B-site precursor method and characterized by X-ray diffraction, differential scanning calorimetry, and dielectric measurements. A phase diagram between PFW and PT has been established. The diffuse phase transition temperature (T_max≈180 K) of PFW was found to continuously increase with the increasing amount of Ti⁴⁺ ions on the B-site. At the same time, the relaxor ferroelectric behavior of PFW is gradually transformed toward a normal ferroelectric state, as evidenced by sharp and nondispersive peaks of dielectric permittivity around T_C for x≥0.25. At room temperature, a transition from a cubic to a tetragonal phase takes place with x increased up to 0.25. A morphotropic phase boundary is located within the composition interval 0.25≤x≤0.35, which separates a pseudocubic (rhombohedral) phase from a tetragonal phase.     

CeAlO3 and Ce1−xRxAlO3 (R=La, Nd) solid solutions: Crystal structure, thermal expansion and phase transitions

The crystal structures of CeAlO₃ and the solid solutions Ce_1−xR_xAlO₃ (R=La, Nd), and their thermal behaviour in a wide temperature range of 12−1200 K have been precisely determined by means of in situ high-resolution X-ray powder diffraction technique applying synchrotron radiation, thermal analysis and magnetic measurements. The unique sequence of the reversible phase transitions I4/mcm↔Imma↔R3¯c↔Pm3¯m has been detected in CeAlO₃ and solid solutions formed in the pseudo-binary system CeAlO₃-LaAlO₃. In the Ce_1−xNd_xAlO₃ system, the samples with x=0.3 and 0.5 compositions undergo three phase transformations I2/m↔Imma↔R3¯c↔Pm3¯m, whereas for the Ce-rich sample Ce_0.9Nd_0.1AlO₃ four successive transitions are observed: I4/mcm↔I2/m↔Imma↔R3¯c↔Pm3¯m. Crystal structure parameters of all structural polymorphs of CeAlO₃ and solid solutions based on them as well as their thermal evolution are reported. Based on in situ powder diffraction and DTA/DSC data, the phase diagrams of the pseudo-binary systems CeAlO₃-LaAlO₃ and CeAlO₃-NdAlO₃ are constructed together with a combined phase diagram, where the transition temperatures are presented as a function of the average radius of rare-earth cations.     

Composition dependence of the photophysical and photocatalytic properties of (AgNbO3)1−x(NaNbO3)x solid solutions

A series of orthorhombic photocatalysts (AgNbO₃)_1−x(NaNbO₃)_x solid solutions have been synthesized by a solid-state reaction method. The composition dependence of the photophysical and photocatalytic properties of synthesized solid solutions has been investigated systematically. With an increase in the content of NaNbO₃, we found that (1) the lattice parameters decreased; (2) the Nb-O bond length in NbO₆ octahedron reduced; (3) the band gap increased; and (4) the mean particle size decreased while the Brunauer-Emmett-Teller (BET) surface area increased. Photocatalytic activities of the (AgNbO₃)_1−x(NaNbO₃)_x (0?x?0.5) samples were evaluated from gaseous 2-propanol (IPA) decomposition into acetone and CO₂ under visible-light irradiation emitted from blue-light-emitting diodes (BLEDs; light intensity: 0.01 mW cm⁻²). Among all the samples, the (AgNbO₃)_0.6(NaNbO₃)_0.4 sample showed the highest photocatalytic activity.     

Synthesis, structure and electrical properties of Cu3.21Ti1.16Nb2.63O12 and the CuOx-TiO2-Nb2O5 pseudoternary phase diagram

Subsolidus phase relations in the CuO_x-TiO₂-Nb₂O₅ system were determined at 935 °C. The phase diagram contains one new phase, Cu_3.21Ti_1.16Nb_2.63O₁₂ (CTNO) and one rutile-structured solid solution series, Ti_1−3xCu_xNb_2xO₂: 0<x<0.2335 (35). The crystal structure of CTNO is similar to that of CaCu₃Ti₄O₁₂ (CCTO) with square planar Cu²⁺ but with A site vacancies and a disordered mixture of Cu⁺, Ti⁴⁺ and Nb⁵⁺ on the octahedral sites. It is a modest semiconductor with relative permittivity ∼63 and displays non-Arrhenius conductivity behavior that is essentially temperature-independent at the lowest temperatures.     

An X-ray diffraction, magnetic susceptibility and spectroscopic studies of Yb2−xCrxO3

Polycrystalline samples with general formula Yb_2−xCr_xO₃ (0<x<0.03), obtained by sol-gel method and analyzed by X-ray diffraction, formed solid solutions over all the mentioned range. Cr showed a maximum solubility of 2.8 mol% in Yb₂O₃ sesquioxide at 1000 °C. A preferential substitution of Cr³⁺ ions over two cationic sites, 8b and 24d in the space group Ia-3 was found. The lattice parameters a are found to vary linearly (10.4402(4) Å <a<10.4372(1) Å) with the composition x. The two independent atoms Yb/Cr have octahedral coordination; however, the degrees of distortion of their coordination polyhedron are different. Replacing Yb³⁺ by Cr³⁺ introduces slight changes in the atomic coordinates leading to an increase of the mean cation-anion distances. The ability of Raman spectroscopy to detect changes in local coordination is utilized. A pseudo-tetrahedral coordination for the Cr³⁺ in the 24d site was found. Magnetic susceptibility measurements of all samples were done in a temperature range of 2-50 K. For T<37 K, the inverse paramagnetic susceptibilities depend linearly on temperature. However, in the high-temperature region, for T>37 K, the inverse paramagnetic susceptibilities are non-linear versus temperature. This deviation from the Curie-Weiss behaviour was discussed.     

Synthesis and structural study of a new NASICON-type solid solution: Li1−xLax/3Zr2(PO4)3

A new complete solid solution of NASICON-type compounds between LiZr₂(PO₄)₃ and La_1/3Zr₂(PO₄)₃ was evidenced with the general formula Li_1−xLa_x/3Zr₂(PO₄)₃ (0?x?1). These phases were synthesized by a complex polymerizable method and structurally characterized from Rietveld treatment of their X-ray and neutron powder diffraction data. This solid solution results from the substitution mechanism Li⁺→1/3La³⁺+2/3□ leading to an increase of the vacancies number correlated to an increase of the La content. According to this substitution mechanism, the general formula can then be written Li_1−xLa_x/3□_2x/3Zr₂(PO₄)₃ (0?x?1) in order to underline the correlation between the La content and the vacancies rate. For all the compounds, the structure is clearly related to that of the NASICON family with three crystallographic domains evidenced. For 0?x?0.5, all the members adopt at high temperature the typical NASICON-type structure (s.g. R3¯c), while at lower temperature, their structure distorts to a triclinic form (s.g. C 1¯), as observed for LiZr₂(PO₄)₃ prepared above 1100 °C. Moreover, in this domain, the reversible transition is clearly soft and the transition temperature strongly depends of the x value. For 0.6?x?0.9, the compounds crystallize in a rhombohedral cell (s.g. R3¯), while for x=1, the phase La_1/3Zr₂(PO₄)₃ is obtained (s.g. P3¯, Z=6, a=8.7378(2) Å, c=23.2156(7) Å).This paper is devoted to the structure analysis of the series Li_1−xLa_x/3Zr₂(PO₄)₃ (0?x?1), from X-ray and neutron powder thermo diffraction and transmission electron microscopy (TEM) studies.     

Evolution of structural distortions in solid solutions between BiMnO3 and BiScO3

Crystal structures of solid solutions of BiMn_1−xSc_xO₃ with x=0.05, 0.1, 0.2, 0.3, 0.4, 0.5, and 0.7 were studied with synchrotron X-ray powder diffraction. The strong Jahn-Teller distortion, observed in BiMnO₃ at 300 K and associated with orbital order, disappeared already in BiMn_0.95Sc_0.05O₃. The orbital-ordered phase did not appear in BiMn_0.95Sc_0.05O₃ down to 90 K. Almost the same octahedral distortions were observed in BiMn_1−xSc_xO₃ with 0.05?x?0.7 at room temperature and in BiMnO₃ at 550 K above the orbital ordering temperature T_OO=473 K. These results allowed us to conclude that the remaining octahedral distortions observed in BiMnO₃ above T_OO are the structural feature originated from the highly distorted monoclinic structure.     

Phase transition behavior for ZrW2−xMoxO8 compositions at elevated temperatures

A systematical study on cubic ZrW_2−xMo_xO₈ (x=0.73, 0.53, 0.33, 0.11) solid solutions reveals that their temperature-dependent phase transition behaviors are related to the Mo fraction x. A phase diagram of cubic ZrW_2−xMo_xO₈ solid solutions has been drawn over a wide temperature range (298–1473 K) on the basis of the temperature-dependent phase transition behaviors observed.     

Sol-gel synthesized semiconducting LaCo0.8Fe0.2O3-based powder for thick film NH3 gas sensor

Perovskite type LaCo_xFe_1−xO₃ nanoparticles was synthesized by a sol-gel citrate method. The structural, electrical and sensing characteristics of the LaCo_xFe_1−xO₃ system were investigated. The structural characteristics were performed by using X-ray diffraction (XRD) and transmission electron microscopy (TEM) to examine the phase and morphology of the resultant powder. The XRD pattern shows nanocrystalline solid solution of LaCo_xFe_1−xO₃ with perovskite phase. Electrical properties of synthesized nanoparticles are studied by DC conductivity measurement. The sensor shows high response towards ammonia gas in spite of other reducing gases when x = 0.8. The effect of 0.3 wt.% Pd-doped LaCo_0.8Fe_0.2O₃ on the response and a recovery time was also addressed.     

Analysis of magnetic and structural phase transition behaviors of La1−xSrxCrO3 for preparation of phase diagram

The phase transition behavior of perovskite-type compounds, La_1−xSr_xCrO₃, was investigated by differential scanning calorimetry (DSC), dilatometry, dc magnetic susceptibility measurement and X-ray diffraction analysis. Both second-order magnetic phase transition from antiferromagnetic to paramagnetic and first-order structural phase transition from orthorhombic to rhombohedral were observed in the DSC or dilatometric curve of every specimen. The temperatures of both these magnetic and structural phase transitions decreased linearly with an increase in Sr content. The structural phase transition temperature of La_1−xSr_xCrO₃ with x less than 0.11 is higher than the magnetic phase transition temperature; however, a larger decrease in structural phase transition temperature than in magnetic phase transition temperature was observed with an increase in Sr content, resulting in a structural phase transition temperature lower than the magnetic phase transition temperature for La_1−xSr_xCrO₃ with x of more than 0.12. It was also observed that the heat of absorption of the structural phase transition decreased with an increase in x. In the dependence of dc magnetic susceptibility on temperature, variations by not only magnetic but also structural phase transitions were observed. It was also revealed that thermal expansion coefficient is affected not only by structural phase transition but also magnetic phase transition. Magnetic and structural phase diagram of La_1−xSr_xCrO₃, suggesting the existence of two Sr contents and temperatures at which triple phases coexist, was proposed.     

Synthesis, optical properties and electronic structures of polyoxometalates K3P(Mo1−xWx)12O40 (0?x?1)

Various compositions of solid solutions K₃P(Mo_1−xW_x)₁₂O₄₀ (0?x?1) were prepared using two solid state synthetic routes. The crystallite size was determined by linewidth refinements of X-ray diffraction patterns using the Warren-Averbach method, and the grain size distribution by laser scattering experiments. Optical properties were determined by diffuse reflectance measurements in the UV-visible range. The optical gap E_g was found to increase exponentially from ∼2.5 to ∼3.30 eV with increasing x, and is systematically shifted to a higher energy when the grain size decreases. The relation between E_g and x was analyzed by calculating the HOMO-LUMO gaps of the [P(Mo_1−xW_x)₁₂O₄₀]³⁻ anions on the basis of tight-binding electronic structure calculations.     

Thermoelectric properties of Ag-doped n-type (Bi2Te3)0.9-(Bi2−xAgxSe3)0.1 (x=0-0.4) alloys prepared by spark plasma sintering

Ag-doped n-type (Bi₂Te₃)_0.9-(Bi_2−xAg_xSe₃)_0.1 (x=0-0.4) alloys were prepared by spark plasma sintering and their physical properties evaluated. When at low Ag content (x=0.05), the temperature dependence of the lattice thermal conductivity follows the trend of (Bi₂Te₃)_0.9-(Bi₂Se₃)_0.1; while at higher Ag content, a relatively rapid reduction above 400 K can be observed due possibly to the enhancement of scattering of phonons by the increased defects. The Seebeck coefficient increases with Ag content, with some loss of electrical conductivity, but the maximum dimensionless figure of merit ZT can be obtained to be 0.86 for the alloy with x=0.4 at 505 K, about 0.2 higher than that of the alloy (Bi₂Te₃)_0.9-(Bi₂Se₃)_0.1 without Ag-doping.     

The phase diagram of the AgNO3−KNO3 system determined by differential scanning calorimetry

The phase diagram for the AgNO₃?KNO₃ system has been determined using differential scanning calorimetry (DSC). Eutectic point has been found at 391 K andX _Ag=0.580 mole fraction AgNO₃. The DSC curves indicate the existence of an intermermediate compound (AgNO₃·KNO₃) in the KNO₃-rich region of the phase diagram. This compound was identified in the solid phase by X-ray diffraction. The melting and the crystallization processes were followed with the aid of a hot stage microscope, too.     

Thermochemistry of Li1+xMn2−xO4 (0?x?1/3) spinel

Lithium substituted Li_1+xMn_2−xO₄ spinel samples in the entire solid solution range (0?x?1/3) were synthesized by solid-state reaction. The samples with x<0.25 are stoichiometric and those with x?0.25 are oxygen deficient. High-temperature oxide melt solution calorimetry in molten 3Na₂O·4MoO₃ at 974 K was performed to determine their enthalpies of formation from constituent binary oxides at 298 K. The cubic lattice parameter was determined from least-squares fitting of powder XRD data. The variations of the enthalpy of formation from oxides and the lattice parameter with x follow similar trends. The enthalpy of formation from oxides becomes more exothermic with x for stoichiometric compounds (x<0.25) and deviates endothermically from this trend for oxygen-deficient samples (x?0.25). This energetic trend is related to two competing substitution mechanisms of lithium for manganese (oxidation of Mn³⁺ to Mn⁴⁺ versus formation of oxygen vacancies). For stoichiometric spinels, the oxidation of Mn³⁺ to Mn⁴⁺ is dominant, whereas for oxygen-deficient compounds both mechanisms are operative. The endothermic deviation is ascribed to the large endothermic enthalpy of reduction.     

A novel route to synthesize cubic ZrW2−xMoxO8 (x=0-1.3) solid solutions and their negative thermal expansion properties

Cubic ZrW_2−xMo_xO₈ (c-ZrW_2−xMo_xO₈) (x=0-1.3) solid solutions were prepared by a novel polymorphous precursor transition route. X-ray diffraction (XRD) analysis reveals that the solid solutions are single phase with α- and β-ZrW₂O₈ structure for 0?x?0.8 and 0.9?x?1.3, respectively. The optimum synthesis conditions of ZrWMoO₈ are obtained from differential scanning calorimetry-thermal gravimetric analysis (DSC-TGA), XRD and mass loss-temperature/time curves. Following the above experience, the stoichiometric solid solutions of c-ZrW_2−xMo_xO₈ (x=0-1) are obtained within 1 wt% of mass loss. The relationships of lattice parameters (a), phase transition temperatures (T_c) and instantaneous coefficients of thermal expansion (α_i) against the content x of Mo are discussed based on the variation of order degree parameters of ZrW_2−xMo_xO₈.     

Comprehensive survey of Nd substitution In La2Mo2O9 oxide-ion conductor

Differential thermal analysis coupled to temperature-controlled diffraction have given evidence of a topological metastability phenomenon in an extended compositional range of the La_2−xNd_xMo₂O₉ solid solution. A metastable-stable phase diagram is proposed for this series of LAMOX-type fast oxide-ion conductors. In the Nd range 0<x?0.35, a freezing of the oxygen/vacancy disorder of the β-phase at ambient temperature can be achieved through a splat-quenching to water-ice mixture or/and shaping/sintering into pellet. In the intermediate 0.4?x?1.2 range, the amount of β-metastable phase grows upon substitution for powders. The negative impact of β-metastable to α phase transition on conductivity tends to disappear through the partial stabilization of the β phase by shaping/sintering.     

Cr3+在不同基质Y3Ga5O12或Ga2O3中的荧光特性

以Ga_2O_3、Y_2O_3、Cr(NO_3)_3·9H_2O为原料,柠檬酸为配位剂,通过溶胶-凝胶高温固相合成法制备出Ga_(2-2x)O_3∶2xCr~(3+)(Ga_2O_3∶xCr)与Y_3Ga_(5-5x)O_(12)∶5xCr~(3+)(YGG∶xCr)2种多晶粉体(x=0.01,0.03,0.05,0.07)。并采用X射线衍射(XRD)、红外光谱(IR)、扫描电镜(SEM)、荧光光谱(PL)对样品的结构、组成、形貌和荧光性能进行测试分析。XRD和IR分析结果显示在900℃煅烧后Ga_2O_3∶xCr和YGG∶xCr两种样品均成相。SEM照片显示Ga_2O_3∶xCr样品形貌为柱形多面体,YGG∶xCr为短棒状。PL结果显示Cr~(3+)在Ga_2O_3和YGG两种基质中的最强荧光发射峰分别位于742和740 nm,均属于Cr~(3+)的~2E-~4A_2跃迁,对比发现Cr~(3+)在YGG基质中的荧光发射强度更强,在远红光区的荧光性能更好,能满足温室照明中植物光合作用的需求。     

Determination of dissociation degrees of K3NbF8 and K3TaF8 by thermodynamic analysis of subsystems of the KF-K2NbF7 and KF-K2TaF7 systems

A special form of the LeChatelier-Shreder equation describing the equilibrium between the crystalline phase and the melt in system A-AB in which the substance AB partially dissociates upon melting was applied to systems KF-K₃NbF₈, K₂NbF₇-K₃NbF₈ and to KF-K₃TaF₈, K₂TaF₇-K₃TaF₈ subsystems of the binary systems KF-K₂NbF₇ and KF-K₂TaF₇ in which the additive compounds K₃NbF₈ and K₃TaF₈ are formed. Using the phase diagram of the system KF-K₂NbF₇ determined by McCawley and Barclay (1971) and the values of the fusion enthalpy of K₃NbF₈ taken from literature, the intervals of the dissociation degree values of K₃NbF₈ for both branches of the liquidus curve of K₃NbF₈ were calculated. The calculated values of the dissociation degree depend on the coordinates of the liquidus curve of K₃NbF₈ of the pertinent phase diagram, on its used branch and section, and on the value of the fusion enthalpy of K₃NbF₈. For the measured fusion enthalpy of K₃NbF₈ (57 kJ mol⁻¹), a common interval of the dissociation degree values of K₃NbF₈ for both branches of the liquidus curve of K₃NbF₈ is 0.71–0.72. Similarly, intervals of the dissociation degree values of K₃TaF₈ for both branches of the liquidus curve of K₃TaF₈ were calculated using the phase diagram of the system KF-K₂TaF₇ determined by Boča et al. (2007) and the measured fusion enthalpy of K₃TaF₈ ((52 ± 2) kJ mol⁻¹). The error of the determination of the fusion enthalpy of K₃TaF₈, the common interval of the dissociation degree values of K₃TaF₈ for both branches of the liquidus curve of K₃TaF₈ is 0.68–0.69.     

Zr1−xLnxW2O8−x/2 (Ln=Eu, Er, Yb): Solid solutions of negative thermal expansion-synthesis, characterization and limited solid solubility

Zr_1−xLn_xW₂O_8−x/2 solid solutions (Ln=Eu, Er, Yb) of different substitution fractions x have been synthesized. Their X-ray diffraction (XRD) patterns have been indexed and lattice parameters calculated based on the α-ZrW₂O₈ structure. The coefficients of thermal expansion (CTEs) of these solid solutions were estimated to be −10.3×10⁻⁶ K⁻¹ in temperature range of 30-100 °C. The solubility of lanthanide ions in these solid solutions decreases linearly with the increase in the radius of substituted lanthanide ions. Based on the concentration dependence of phase transition temperatures, a novel method for determination of solubility of the lanthanide ions in Zr_1−xLn_xW₂O_8−x/2 solid solutions has been developed. This method seems to be more sensitive as compared with that based on XRD technique.