Optical and ultrasonic monitoring of femtosecond laser filamentation in fused silica

Millimeter-long filaments and accompanying luminous plasma and defect channels created in fused silica (FS) by single focused femtosecond laser pulses with supercritical powers were probed in situ using optical imaging and contact ultrasonic techniques. Above the threshold pulse energy E_opt = 5 μJ corresponding to a few megawatt power levels pulses collapse due to self-focusing, producing channels filled by electron-hole plasma and luminescent defects, and exhibits predominantly compressive pressure transients. Analysis of the optical and ultrasonic response versus the laser pulse energy suggests that filamentary pulse propagation in the channels occurs with considerable dissipation of about ∼10 cm⁻¹. The predominant ionization mechanism is most likely associated with avalanche ionization, while the main mechanism of optical absorption is free-carrier absorption via inverse Bremsstrahlung interaction with the polar lattice.     

Organic thin films based on a dicyanovinyl-quaterthiophene: Influence of electrode configuration on third-order nonlinear optical properties measured by electroabsorption spectroscopy

Electroabsorption (EA) studies at room temperature on organic thin films based on a dicyanovinyl-quaterthiophene 4T-V(CN)₂ are reported. An electric field modulation is applied to the samples for two different electrode geometries, i.e. sandwich and coplanar versus the organic layer. Changes in optical absorption coefficient of 4T-V(CN)₂ based thin films are measured and analyzed to determine the character of the optical transition in the visible range (400-800 nm). Depending on the experimental electrode configuration, magnitude of electroabsorption responses are different, possibly due to different distribution of the externally applied electric field. The results indicate a higher resolution of EA response for the sandwich electrode configuration and confirm the charge transfer exciton character of 4T-V(CN)₂ in contrast to the unsubstituted quaterthiophene 4T. Finally, a third-order nonlinear susceptibility χ⁽³⁾ (−ω; ω, 0, 0) of 16 × 10⁻¹² e.s.u. is obtained.     

Electrical and electromechanical properties of lead-potassium-yttrium-niobate ceramics—piezoelectric applications

Tungsten bronze (TB)-type oxide ceramic Pb_0.74K_0.13Y_0.13Nb₂O₆ (PKYN) has been synthesized by the standard solid state reaction method. Single phase formation, orthorhombic crystal structure was confirmed by X-ray diffraction (XRD). The substitution of Y³⁺ in Pb_0.74K_0.52Nb₂O₆ (PKN) decreased the unit cell volume and T_C=260 °C. PKYN exhibited the remnant polarization, P_r=8.5 μC/cm², and coercive field, E_c=28.71 kV/cm. Electrical spectroscopy studies were carried out over the temperature (35-595 °C) and frequency (45 Hz-5 MHz) ranges, and the charge carrier phenomenon, grain-grain boundary contribution and non-Debye-type relaxation were analyzed. The relaxation species are immobile charges in low temperature and oxygen vacancies at higher temperature. The theoretical values computed using the relations, ε′=ε_∞+sin(n(T)π/2)(a(T)/ε₀)(ω^n(T)−1); σ(ω)=σ_dc+Aωⁿ are fitted with the experimental one. The n and A parameters suggested that the charge carrier's couple with the soft mode and become mobile at T_C. The activation enthalpy, H_m=0.38 eV, has been estimated from the hopping frequency relation ω_p=ω_e exp(−H_m/k_BT). The piezoelectric constants K_t=35.4%, d₃₃=69×10⁻¹² C/N, d₃₁=−32×10⁻³ mV/N, S₁₁^E=17.8 pm²/N, etc., achieved in PKYN indicate the material is interesting for transducer applications. The activation energies from different formalisms confirmed the ionic-type conduction.     

Propagation of electromagnetic waves in hot magnetoactive plasma

The paper derives the general form of the tensor of dielectric permittivity? _ij(ω,k), Eq. (15), of non-relativistic hot magnetoactive collisionless plasma taking into consideration the influence of spatial dispersion. The general form of the tensor? _ij(ω,k) is used to express the tensorε _ij(ω,k) in the region of weak and strong spatial dispersion and in some special cases. A general dispersion equation (30) is derived and an analysis is made of the waves propagating in hot magnetoactive plasma. The expressions derived are used to investigate the damping of a right-handed circularly polarized wave propagating in hot magnetoactive plasma in the direction of the magnetic field.     

Impact of laser produced X-rays on the surface of gold

In the paper an attempt has been made to use the laser-induced plasma as an X-ray source for the growth of nanostructures on the surface of gold. For this purpose, an Nd:YAG laser operated at second harmonics (λ = 532 nm, E = 400 mJ) is used to produce plasma from analytical grade 5N pure Al, Cu and W targets. An analytical grade (5N pure) gold substrate was irradiated by X-rays generated from Al, Cu and W plasma under the vacuum ∼10⁻⁴ Torr. The surface was analyzed by two techniques, XRD and AFM. The aberrations in the XRD peaks show that there are significant structural changes in the exposed gold, in terms of decreased reflection intensities, increased dislocation line density, changes in the d-spacing and disturbance in the periodicity of the planes. AFM used to explore the topography of the irradiated gold reveals that regardless of the source, nm sized hillocks have been produced on the gold surface. The roughness of the surface has increased due to the growth of these hillocks.     

The resonance decay function method in the determination of the pre-factor of the Néel relaxation time of single-domain nanoparticles

In its simple form, the relaxation time of the Néel relaxation process of the magnetic moment of single-domain particles is given by τ_N=τ_0Nexp(σ), σ being the ratio of anisotropy energy to thermal energy. The pre-factor, τ_0N, is normally given a value of 10⁻⁹ s, but values ranging from 10⁻⁸ to 10⁻¹² s have been reported in literature. Here, by means of the field and frequency dependence of the complex magnetic susceptibility, χ(ω,H)=χ′(ω,H)−iχ″(ω,H), of a magnetic fluid sample, in the MHz-GHz range, in conjunction with the determination of the sample decay function, b(t), the pre-factor τ_0N is determined. b(t) is readily obtained through the inverse Fourier transformation relationship, which exists between b(t) and χ″(ω).     

Time resolved magnetic ordering and photo-induced gyrotropy at room temperature in CdMgTe-CdMnTe semiconductor micro-cavities

Using a picosecond pump and probe time-resolved technique we evidence a single pump pulse photo-induced magnetic ordering in a Mn-doped semiconductor magneto-photonic microcavity operating in the strong coupling regime at room temperature. This nanosecond duration magnetization is attributed to a magnetic ordering of the Mn-impurities mediated through photo-generated holes and enhanced through the confinement. It is distinct from the preceding short lived photo-induced spin orientation of carriers also evidenced by our technique for circularly polarized pump beams. The photo-generated magnetic flux density amounts to a 1 kG for beam fluences of few tens μJ cm⁻² and effective Mn concentrations of 5 nm⁻³; large photo-induced magneto-optic Kerr rotations are also evidenced.     

Molecular dynamics simulation of femtosecond ablation and spallation with different interatomic potentials

Fast heating of target material by femtosecond laser pulse (fsLP) with duration τ_L∼40-100 fs results in the formation of thermomechanically stressed state. Its unloading may cause frontal cavitation of subsurface layer at a depth of 50 nm for Al and 100 nm for Au. The compression wave propagating deep into material hits the rear-side of the target with the formation of rarefaction wave. The last may produce cracks and rear-side spallation. Results of MD simulations of ablation and spallation of Al and Au metals under action fsLP are presented. It is shown that the used EAM potentials (Mishin et al. and our new one) predict the different ablation and spallation thresholds on absorbed fluence in Al: ablation F_a=60{65} mJ/cm²and spallation F_s=120{190} mJ/cm², where numbers in brackets { } show the corresponding values for Mishin potential. The strain rate in spallation zone was 4.3×10⁹ 1/s at spallation threshold. Simulated spall strength of Al is 7.4{8.7} GPa, that is noticeably less than 10.3{14} GPa obtained from acoustic approximation with the use of velocity pullback on velocity profile of free rear surface. The ablation threshold F_a≈120 mJ/cm² and crater depth of 110 nm are obtained in MD simulations of gold with the new EAM potential. They agree well with experiment.     

Photoluminescence investigation of ferromagnetic Ga1−xMnxN layers with GaN templates grown on sapphire (0 0 0 1) substrates

We have investigated the temperature and composition dependent photoluminescence (PL) spectra in Ga_1−xMn_xN layers (where x ≈ 0.1-0.8%) grown on sapphire (0 0 0 1) substrates using the plasma-enhanced molecular beam epitaxy technique. The efficient PL is peaked in the red (1.86 eV), yellow (2.34 eV), and blue (3.29 eV) spectral range. The band-gap energy of the Ga_1−xMn_xN layers decreased with increasing temperature and manganese composition. The band-gap energy of the Ga_1−xMn_xN layers was modeled by the Varshni equation and the parameters were determined to be α = 2.3 × 10⁻⁴, 2.7 × 10⁻⁴, 3.4 × 10⁻⁴ eV/K and β = 210, 210, and 230 K for the manganese composition x = 0.1%, 0.2%, and 0.8%, respectively. As the Mn concentration in the Ga_1−xMn_xN layers increased, the temperature dependence of the band-gap energy was clearly reduced.     

Magnetic field influence on the low temperature heat capacity of the spin-Peierls compound CuGeO3

We have investigated the effect of magnetic field on the low-temperature heat capacity C_p of the undoped spin-Peierls inorganic compound CuGeO₃ in the dimerized phase. Below 1 K, C_p is dominated by a Schottky anomaly, which is removed above 1 K for field B higher than 3 T. This anomaly is well accounted for by a molar concentration x=0.75×10⁻³ of intrinsic defects, which occur predominantly on the Cu chains. This amount is confirmed by magnetization measurements. A second contribution, varying as T^−ν with ν=1 or 2, rises up with the field for B>1 T in the lower temperature range (from 70 mK to 0.3 K). At high field this contribution becomes very sensitive to the experimental dynamics.     

Generation of THz Radiation from Laser Beam Filamentation in a Magnetized Plasma

The terahertz (THz) frequency radiation production as a result of nonlinear interaction of high intense laser beam with low density ripple in a magnetized plasma has been studied. If the appropriate phase matching conditions are satisfied and the frequency of the ripple is appropriate then this difference frequency can be brought in the THz range. Self focusing (filamentation) of a circularly polarized beam propagating along the direction of static magnetic field in plasma is first investigated within extended‐paraxial ray approximation. The beam gets focused when the initial power of the laser beam is greater than its critical power. Resulting localized beam couples with the pre‐existing density ripple to produce a nonlinear current driving the THz radiation. By changing the strength of the magnetic field, one can enhance or suppress the THz emission. The expressions for the laser beam width parameter, the electric field vector of the THz wave have been obtained. For typical laser beam and plasma parameters with the incident laser intensity ≈ 10¹⁴ W/cm², laser beam radius (r₀) = 50 μm, laser frequency (ω₀) = 1.8848 × 10¹⁴rad/s, electron plasma (low density rippled) wave frequency (ω₀) = 1.2848 × 10¹⁴ rad/s, plasma density (n₀) = 5.025 × 10¹⁷cm^–3, normalized ripple density amplitude (μ)=0.1, the produced THz emission can be at the level of Giga watt (GW) in power (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Single crystal EPR and optical absorption study of Cr doped l-histidine hydrochloride monohydrate

EPR study of the Cr³⁺ ion doped l-histidine hydrochloride monohydrate single crystal is done at room temperature. Two magnetically inequivalent interstitial sites are observed. The hyperfine structure for Cr⁵³ isotope is also obtained. The zero field and spin Hamiltonian parameters are evaluated from the resonance lines obtained at different angular rotations and the parameters are: D=(300±2)×10⁻⁴ cm⁻¹, E=(96±2)×10⁻⁴ cm⁻¹, g_x=1.9108±0.0002, g_y=1.9791±0.0002, g_z=2.0389±0.0002, A_x=(252±2)×10⁻⁴ cm⁻¹, A_y=(254±2)×10⁻⁴ cm⁻¹, A_z=(304±2)×10⁻⁴ cm⁻¹ for site I and D=(300±2)×10⁻⁴ cm⁻¹, E=(96±2)×10⁻⁴ cm⁻¹, g_x=1.8543±0.0002, g_y=1.9897±0.0002, g_z=2.0793±0.0002, A_x=(251±2)×10⁻⁴ cm⁻¹, A_y=(257±2)×10⁻⁴ cm⁻¹, A_z=(309±2)×10⁻⁴ cm⁻¹ for site II, respectively. The optical absorption studies of single crystals are also carried out at room temperature in the wavelength range 195-925 nm. Using EPR and optical data, different bonding parameters are calculated and the nature of bonding in the crystal is discussed. The values of Racah parameters (B and C), crystal field parameter (Dq) and nephelauxetic parameters (h and k) are: B=636, C=3123, Dq=2039 cm⁻¹, h=1.46 and k=0.21, respectively.     

Superparamagnetic behavior of La0.67Sr0.33MnO3 nanoparticles prepared via sol-gel method

Magnetic nanoparticles of La_0.67Sr_0.33MnO₃ (LSMO) manganite were prepared by sol-gel method. Phase formation and crystal structure of the synthesized powder were examined by the X-ray diffraction (XRD) using the Rietveld analysis. The mean particle size was determined by the transmission electron microscopy (TEM). Infrared transmission spectroscopy revealed that stretching and bending modes are influenced by calcinations temperature. The temperature dependence of the ac magnetic susceptibility was measured at different frequencies and ac magnetic fields in the selected ranges of 40-1000 Hz and 80-800 A/m, respectively. The temperature dependence of ac susceptibility shows a characteristic maxima corresponding to the blocking temperature near room temperature. The frequency dependence of the blocking temperature is well described by the Vogel-Fulcher law. By fitting the experimental data with this law, the relaxation time τ₀=1.7×10⁻¹² s, characteristic temperature T₀=262±3 K, anisotropy energy E_a/k=684±15 K and effective magnetic anisotropy constant k_eff=2.25×10⁴ erg/cm³ have been obtained. dc Magnetization measurement versus magnetic field shows that some of LSMO nanoparticles are blocked at 293 K. The role of magnetic interparticle interactions on the magnetic behavior is also investigated.     

Nonlinear optical properties of periodic gold nanoparticle arrays

Periodic Au nanoparticle arrays were fabricated on silica substrates using nanosphere lithography. The identical single-layer masks were prepared by self-assembly of polystyrene nanospheres with radius R = 350 nm. The structural characterization of nanosphere masks and periodic particle arrays was investigated by atomic force microscopy. The nonlinear optical properties of the Au nanoparticle arrays were determined using a single beam z-scan method at a wavelength of 532 nm with laser duration of 55 ps. The results show that periodic Au nanoparticle arrays exhibit a fast third-order nonlinear optical response with the nonlinear refractive index and nonlinear absorption coefficient being n₂ = 6.09 × 10⁻⁶ cm²/kW and β = −1.87 × 10⁻⁶ m/W, respectively.     

Investigation of magnetocaloric effect in La0.45Pr0.25Ca0.3MnO3 by magnetic,differential scanning calorimetry and thermal analysis

We investigated magnetocaloric effect in La_0.45Pr_0.25Ca_0.3MnO₃ by direct methods (changes in temperature and latent heat) and indirect method (magnetization isotherms). This compound undergoes a first-order paramagnetic to ferromagnetic transition with T_C=200 K upon cooling. The paramagnetic phase becomes unstable and it transforms into a ferromagnetic phase under the application of magnetic field, which results in a field-induced metamagnetic transition (FIMMT). The FIMMT is accompanied by release of latent heat and temperature of the sample as evidenced from differential scanning calorimetry and thermal analysis experiments. A large magnetic entropy change of ΔS_m=−7.2 J kg⁻¹ K⁻¹ at T=212.5 K and refrigeration capacity of 228 J kg⁻¹ are found for a field change of ΔH=5 T. It is suggested that destruction of magnetic polarons and growth of ferromagnetic phase accompanied by a lattice volume change with increasing magnetic field is responsible for the large magnetocaloric effect in this compound.     

Nonlinear optical properties and photoinduced anisotropy of an azobenzene ionic liquid-crystalline polymer

The nonlinear optical properties and photoinduced anisotropy of an azobenzene ionic liquid-crystalline polymer were investigated. The single beam Z-scan measurement showed the polymer film possessed a value of nonlinear refractive index n₂ = −1.07 × 10⁻⁹ cm²/W under a picosecond 532 nm excitation. Photoinduced anisotropy in the polymer was studied through dichroism and photoinduced birefringence. A photoinduced birefringence value Δn ∼ 10⁻² was achieved in the polymer film. The mechanism for the nonlinear optical response and the physical process of photoinduced anisotropy in the polymer were discussed.     

Giant forced volume magnetostriction in polycrystalline Tb0.3Dy0.7Fe1.95 alloys under magnetomechanical loading

The axial and transversal linear magnetostrictions (λ_∥ and λ_⊥) in [1 1 0] oriented polycrystalline Tb_0.3Dy_0.7Fe_1.95 alloys were measured simultaneously under uniaxial magnetomechanical loading to get the forced volume magnetostriction (ω=λ_∥+2λ_⊥). Despite the almost zero ω observed in Terfenol-D single crystals, it reaches up to 1000×10⁻⁶ in polycrystalline Tb_0.3Dy_0.7Fe_1.95 alloys near the saturation magnetic field under a stress above 50 MPa.     

Heat capacities of the electron acceptor 7,7,8,8-tetracyano- quinodimethane (TCNQ) and its radical-ion salt NH4(TCNQ) showing spin-Peierls transition

Heat capacities of the electron acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) and its radical-ion salt NH₄-TCNQ have been measured at temperatures in the 12-350 K range by adiabatic calorimetry. A λ-type heat capacity anomaly arising from a spin-Peierls (SP) transition was found at 301.3 K in NH₄-TCNQ. The enthalpy and entropy of transition are Δ_trsH=(667±7) J mol⁻¹ and Δ_trsS=(2.19±0.02) J K⁻¹ mol⁻¹, respectively. The SP transition is characterized by a cooperative coupling between the spin and the phonon systems. By assuming a uniform one-dimensional antiferromagnetic (AF) Heisenberg chains consisting of quantum spin (S=1/2) in the high-temperature phase and an alternating AF nonuniform chains in the low-temperature phase, we estimated the magnetic contribution to the entropy as Δ_trsS_mag=0.61 J K⁻¹ mol⁻¹ and the lattice contribution as Δ_trsS_lat=1.58 J K⁻¹ mol⁻¹. Although the total magnetic entropy expected for the present compound is R ln 2 (=5.76 J K⁻¹ mol⁻¹), a majority of the magnetic entropy (∼4.6 J K⁻¹ mol⁻¹) persists in the high-temperature phase as a short-range-order effect. The present thermodynamic investigation quantitatively revealed the roles played by the spin and the phonon at the SP transition. Standard thermodynamic functions of both compounds have also been determined.     

Photo-induced bias of the hysteresis loop in ferrites at room temperature with long-time memory

New photo-magnetic effects with an indefinitely long-time memory are found at room temperature in the epitaxial Mg_0.75Mn_0.21Co_0.04Fe₂O₄ ferrite film. Illumination of the ferrimagnetic material with low-intensity (0.4 W cm⁻²) circularly polarized light with or without a static magnetic field in the Faraday effect geometry results in a number of nonlinear effects in both space and time. In a uniform crystal with cubic symmetry, the long-lived photo-induced magnetization (PIM) with a unidirectional anisotropy appears along the direction of the incoming light. The effects depend on a combination of magnetic field H and the helicity of circularly polarized light σ. Two combinations H⁺,σ⁺ and H⁻,σ⁻ lead to a photo-induced unidirectional anisotropy with a shift of the hysteresis loop along an applied field and a change in loop parameters. The loop contracts by a factor of two, the shift of the mid-point H_sh increases by factor of five surpassing the coercivity H_c, the coercivity H_c1 and remanence M_r1 (for decreasing applied field) reverse the sign, increasing by 9 Oe and reducing by a factor of 4.5, respectively. The effects cannot be erased by a conventional demagnetization (using an AC current that is reduced to zero amplitude), but can be removed using an illumination with two other combinations (H⁺,σ⁻ and H⁻,σ⁺) as well as by heating at temperatures higher than the Curie temperature. This long-lived room-temperature memory effect may arise from the formation of complex photo-induced defects including photo-induced magnetic polarons. The possible mechanisms responsible for the appearance of a room-temperature photo-induced unidirectional anisotropy with a long-lived memory are discussed. These new photo-magnetic effects may find an application in magneto-optical memory devices.