Highly Accurate CCSD(T) and DFT–SAPT Stabilization Energies of H‐Bonded and Stacked Structures of the Uracil Dimer

The CCSD(T) interaction energies for the H‐bonded and stacked structures of the uracil dimer are determined at the aug‐cc‐pVDZ and aug‐cc‐pVTZ levels. On the basis of these calculations we can construct the CCSD(T) interaction energies at the complete basis set (CBS) limit. The most accurate energies, based either on direct extrapolation of the CCSD(T) correlation energies obtained with the aug‐cc‐pVDZ and aug‐cc‐pVTZ basis sets or on the sum of extrapolated MP2 interaction energies (from aug‐cc‐pVTZ and aug‐cc‐pVQZ basis sets) and extrapolated ΔCCSD(T) correction terms [difference between CCSD(T) and MP2 interaction energies] differ only slightly, which demonstrates the reliability and robustness of both techniques. The latter values, which represent new standards for the H‐bonding and stacking structures of the uracil dimer, differ from the previously published data for the S22 set by a small amount. This suggests that interaction energies of the S22 set are generated with chemical accuracy. The most accurate CCSD(T)/CBS interaction energies are compared with interaction energies obtained from various computational procedures, namely the SCS–MP2 (SCS: spin‐component‐scaled), SCS(MI)–MP2 (MI: molecular interaction), MP3, dispersion‐augmented DFT (DFT–D), M06–2X, and DFT–SAPT (SAPT: symmetry‐adapted perturbation theory) methods. Among these techniques, the best results are obtained with the SCS(MI)–MP2 method. Remarkably good binding energies are also obtained with the DFT–SAPT method. Both DFT techniques tested yield similarly good interaction energies. The large magnitude of the stacking energy for the uracil dimer, compared to that of the benzene dimer, is explained by attractive electrostatic interactions present in the stacked uracil dimer. These interactions force both subsystems to approach each other and the dispersion energy benefits from a shorter intersystem separation.     

Computational thermochemistry of glycolaldehyde

We use a variant of the focal point analysis to refine estimates of the relative energies of the four low‐energy torsional conformers of glycolaldehyde. The most stable form is the cis‐cis structure which enjoys a degree of H‐bonding from hydroxyl H to carbonyl O; here dihedral angles τ₁ (O?C? C? O) and τ₂ (C? C? O? H) both are zero. We optimized structures in both CCSD(T)/aug‐cc‐pVDZ and aug‐cc‐pVTZ; the structures agree within 0.01 Å for bond lengths and 1.0 degrees for valence angles, but the larger basis brings the rotational constants closer to experimental values. According to our extrapolation of CCSD(T) energies evaluated in basis sets ranging to aug‐cc‐pVQZ the trans‐trans form (180°, 180°) has a relative energy of 12.6 kJ/mol. The trans‐gauche conformer (160°, ±75°) is situated at 13.9 kJ/mol and the cis‐trans form (0°, 180°) at 18.9 kJ/mol. Values are corrected for zero point vibrational energy by MP2/aug‐cc‐pVTZ frequencies. Modeling the vibrational spectra is best accomplished by MP2/aug‐cc‐pVTZ with anharmonic corrections. We compute the Watsonian parameters that define the theoretical vibrational‐rotational spectra for the four stable conformers, to assist the search for these species in the interstellar medium. Six transition states are located by G4 and CBS‐QB3 methods as well as extrapolation using energies for structures optimized in CCSD(T)/aug‐cc‐pVDZ structures. We use two isodesmic reactions with two well‐established thermochemical computational schemes G4 and CBS‐QB3 to estimate energy enthalpy and Gibbs energy of formation as well as the entropy of the gas phase system. Our extrapolated electronic energies of species appearing in the isodesmic reactions produce independent values of thermodynamic quantities consistent with G4 and CBS‐QB3. © 2013 Wiley Periodicals, Inc.     

Computer simulation of trifluoromethane properties with ab initio force field

Intermolecular interaction potentials of the trifluoromethane dimer in 15 orientations have been calculated using the Hartree‐Fock (HF) self‐consistent theory and the second‐order Møller‐Plesset (MP2) perturbation theory. Single point energies at important geometries were also calibrated by the coupled cluster with single and double and perturbative triple excitation [CCSD(T)] calculations. We have employed Pople's medium size basis sets [up to 6‐311++G(3df,3pd)] and Dunning's correlation consistent basis sets (up to aug‐cc‐pVQZ). Basis set limit potential values were obtained through well‐studied extrapolation methods. The calculated MP2 potential data were employed to parameterize a 5‐site force field for molecular simulations. We performed molecular dynamics simulations using the constructed ab initio force field and compared the simulation results with experiments. Quantitative agreements for the atom‐wise radial distribution functions and the self‐diffusion coefficients over a wide range of experimental conditions can be obtained, thus validating the ab initio force field without using experimental data a priori. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Ab initio calculations of the Ar–ethane intermolecular potential energy surface using bond function basis sets

The intermolecular potential energy surface (PES) of argon with ethane has been studied by ab initio calculations at the levels of second‐order Møller–Plesset perturbation (MP2) theory and coupled‐cluster theory with single, double, and noniterative triple configurations (CCSD(T)) using a series of augmented correlation‐consistent basis sets. Two sets of bond functions, bf1 (3s3p2d) and bf2 (6s6p4d2f), have been added to the basis sets to show a dramatic and systematic improvement in the convergence of the entire PES. The PES of Ar–ethane is characterized by a global minimum at a near T‐shaped configuration with a well depth of 0.611 kcal mol^?1, a second minimum at a collinear configuration with a well depth of 0.456 kcal mol^?1, and a saddle point connecting the two minima. It is shown that an augmented correlation‐consistent basis set with a set of bond functions, either bf1 or bf2, can effectively produce results equivalent to the next larger augmented correlation‐consistent basis set, that is, aug‐cc‐pVDZ‐bf1 ≈ aug‐cc‐pVTZ, aug‐cc‐pVTZ‐bf1 ≈ aug‐cc‐pVQZ. Very importantly, the use of bond functions improves the PES globally, resulting accurate potential anisotropy. Finally, MP2 method is inadequate for accurate calculations, because it gives a potentially overestimated well depth and, more seriously, a poor potential anisotropy. © 2012 Wiley Periodicals, Inc.     

A theoretical study of the H-abstraction reactions from HOI by moist air radiolytic products (H, OH, and O (3P)) and iodine atoms (2P(3/2))

The rate constants of the reactions of HOI molecules with H, OH, O ((3)P), and I ((2)P(3/2)) atoms have been estimated over the temperature range 300-2500 K using four different levels of theory. Geometry optimizations and vibrational frequency calculations are performed using MP2 methods combined with two basis sets (cc-pVTZ and 6-311G(d,p)). Single-point energy calculations are performed with the highly correlated ab initio coupled cluster method in the space of single, double, and triple (pertubatively) electron excitations CCSD(T) using the cc-pVTZ, cc-pVQZ, 6-311+G(3df,2p), and 6-311++G(3df,3pd) basis sets. Reaction enthalpies at 0 K were calculated at the CCSD(T)/cc-pVnZ//MP2/cc-pVTZ (n = T and Q), CCSD(T)/6-311+G(3df,2p)//MP2/6-311G(d,p), and CCSD(T)/6-311++G(3df,3pd)//MP2/6-311G(d,p) levels of theory and compared to the experimental values taken from the literature. Canonical transition-state theory with an Eckart tunneling correction is used to predict the rate constants as a function of temperature. The computational procedure has been used to predict rate constants for H-abstraction elementary reactions because there are actually no literature data to which the calculated rate constants can be directly compared. The final objective is to implement kinetics of gaseous reactions in the ASTEC (accident source term evaluation code) program to improve speciation of fission products, which can be transported along the reactor coolant system (RCS) of a pressurized water reactor (PWR) in the case of a severe accident.     

Interactions of the “piano‐stool” [ruthenium(II) (η6‐arene)(en)CL]+ complexes with water and nucleobases; ab initio and DFT study

Piano stool ruthenium complexes of the composition [Ru(II)(η⁶‐arene)(en)Cl]^+/2+ (en = ethylenediamine) represent an emerging class of cisplatin‐analogue anticancer drug candidates. In this study, we use computational quantum chemistry to characterize the structure, stability and reactivity of these compounds. All these structures were optimized at DFT(B3LYP)/6‐31G(d) level and their single point properties were determined by the MP2/6‐31++G(2df,2pd) method. Thermodynamic parameters and rate constants were determined for the aquation process, as a replacement of the initial chloro ligand by water and subsequent exchange reaction of aqua ligand by nucleobases. The computations were carried out at several levels of DFT and ab initio theories (B3LYP, MP2 and CCSD) utilizing a range of bases sets (from 6‐31G(d) to aug‐cc‐pVQZ). Excellent agreement with experimental results for aquation process was obtained at the CCSD level and reasonable match was achieved also with the B3LYP/6‐31++G(2df,2pd) method. This level was used also for nucleobase‐water exchange reaction where a smaller rate constant for guanine exchange was found in comparison with adenine. Although adenine follows a simple replacement mechanism, guanine complex passes by a two‐step mechanism. At first, Ru‐O6(G) adduct is formed, which is transformed through a chelate TS2 to the Ru‐N7(G) final complex. In case of guanine, the exchange reaction is more favorable thermodynamically (releasing in total by about 8 kcal/mol) but according to our results, the rate constant for guanine substitution is slightly smaller than the analogous constant in adenine case when reaction course from local minimum is considered. © 2008 Wiley Periodicals, Inc. J Comput Chem, 2009     

Characterization of the potential energy surfaces of two small but challenging noncovalent dimers: (P2)2 and (PCCP)2

This work characterizes eight stationary points of the P₂ dimer and six stationary points of the PCCP dimer, including a newly identified minimum on both potential energy surfaces. Full geometry optimizations and corresponding harmonic vibrational frequencies were computed with the second‐order Møller–Plesset (MP2) electronic structure method and six different basis sets: aug‐cc‐pVXZ, aug‐cc‐pV(X+d)Z, and aug‐cc‐pCVXZ where X = T, Q. A new L‐shaped structure with C₂ symmetry is the only minimum for the P₂ dimer at the MP2 level of theory with these basis sets. The previously reported parallel‐slipped structure with C_2h symmetry and a newly identified cross configuration with D₂ symmetry are the only minima for the PCCP dimer. Single point energies were also computed using the canonical MP2 and CCSD(T) methods as well as the explicitly correlated MP2‐F12 and CCSD(T)‐F12 methods and the aug‐cc‐pVXZ (X = D, T, Q, 5) basis sets. The energetics obtained with the explicitly correlated methods were very similar to the canonical results for the larger basis sets. Extrapolations were performed to estimate the complete basis set (CBS) limit MP2 and CCSD(T) binding energies. MP2 and MP2‐F12 significantly overbind the P₂ and PCCP dimers relative to the CCSD(T) and CCSD(T)‐F12 binding energies by as much as 1.5 kcal mol^?1 for the former and 5.0 kcal mol^?1 for the latter at the CBS limit. The dominant attractive component of the interaction energy for each dimer configuration was dispersion according to several symmetry‐adapted perturbation theory analyses. © 2014 Wiley Periodicals, Inc.     

Theoretical investigations on analytical potential energy function and spectroscopic parameters for the state b3Πu of dimer 7Li2

The SAC‐CI (symmetry‐adapted‐cluster configuration‐interaction) method presented in Gaussian 03 program package is applied to investigate the adiabatic potential energy curves (PECs) of ⁷Li₂(b³Π_u). These calculations are performed at numbers of basis sets, such as 6‐311++G(3df,3pd), 6‐311++G(2df,2pd), 6‐311++G(df,pd), D95V++, D95(3df,3pd), D95(d,p), cc‐PVTZ, 6‐311++G and 6‐311++G(d,p). All the ab initio calculated points are fitted to the analytic Murrell‐Sorbie functions and then used to compute the spectroscopic parameters. The analytic potential energy function (APEF) for this b³Π_u state is reported. By comparison, the spectroscopic parameters reproduced by the APEF attained at 6‐311++G(2df,2pd) are found to be very close to the latest experimental findings. With the APEF obtained at the SAC‐CI/6‐311++G(2df,2pd) level of theory, a total of 62 vibrational states is found when J = 0. The complete vibrational levels, classical turning points, inertial rotation and centrifugal distortion constants for these vibrational states are also reported. The reasonable dissociation limit for this state is deduced using the calculated results at present. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Nonempirical calculations of the one‐bond 29Si–13C spin–spin coupling constants taking into account relativistic and solvent corrections

The computational study of the one‐bond ²⁹Si–¹³C spin–spin coupling constants has been performed at the second‐order polarization propagator approximation (SOPPA) level in the series of 60 diverse silanes with a special focus on the main factors affecting the accuracy of the calculation including the level of theory, the quality of the basis set, and the contribution of solvent and relativistic effects. Among three SOPPA‐based methods, SOPPA(MP2), SOPPA(CC2), and SOPPA(CCSD), the best result was achieved with SOPPA(CCSD) when used in combination with Sauer's basis set aug‐cc‐pVTZ‐J characterized by the mean absolute error of calculated coupling constants against the experiment of ca 2 Hz in the range of ca 200 Hz. The SOPPA(CCSD)/aug‐cc‐pVTZ‐J method is recommended as the most accurate and effective computational scheme for the calculation of ¹J(Si,C). The slightly less accurate but essentially more economical SOPPA(MP2)/aug‐cc‐pVTZ‐J and/or SOPPA(CC2)/aug‐cc‐pVTZ‐J methods are recommended for larger molecular systems. It was shown that solvent and relativistic corrections do not play a major role in the computation of the total values of ¹J(Si,C); however, taking them into account noticeably improves agreement with the experiment. The rovibrational corrections are estimated to be of about 1 Hz or 1–1.5% of the total value of ¹J(Si,C). Copyright © 2014 John Wiley & Sons, Ltd.     

Barrier heights for H‐atom abstraction by HȮ2 from n‐butanol—A simple yet exacting test for model chemistries?

The barrier heights involved in the abstraction of a hydrogen atom from n‐butanol by the hydroperoxyl radical have been computed with both compound (CBS‐QB3, CBS‐APNO, G3) and coupled cluster methods. In particular, the benchmark computations CCSD(T)/cc‐pVTZ//MP2/6‐311G(d,p) were used to determine that the barrier heights increase in the order α <γ < β < δ < OH. Two prereaction hydrogen‐bonded complexes are formed, one of which connects the TGt conformer of n‐butanol to the α and β transition states and the other connects to the γ and OH channels from the TGg conformer. Four postreaction complexes were also found which link the transition states to the products, hydrogen peroxide + C₄H₉O radical. Abstraction from the terminal δ carbon atom does not involve either a pre or postreaction complex. A number of DFT functionals—B3LYP, BMK, MPWB1K, BB1K, MPW1K, and M05‐2X—were tested to see whether the correct ranking could be obtained with computationally less expensive methods. Only the later functional predicts the correct order but requires a basis set of 6‐311++G(df,pd) to achieve this. However, the absolute values obtained do not agree that well with the benchmarks; the composite G3 method predicts the correct order and comes closest (≤ 2 kJ, mol ^?1) in absolute numerical terms for H‐abstraction from carbon. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Molecular dynamics simulations of fluid methane properties using ab initio intermolecular interaction potentials

Intermolecular interaction energy data for the methane dimer have been calculated at a spectroscopic accuracy and employed to construct an ab initio potential energy surface (PES) for molecular dynamics (MD) simulations of fluid methane properties. The full potential curves of the methane dimer at 12 symmetric conformations were calculated by the supermolecule counterpoise‐corrected second‐order Møller‐Plesset (MP2) perturbation theory. Single‐point coupled cluster with single and double and perturbative triple excitations [CCSD(T)] calculations were also carried out to calibrate the MP2 potentials. We employed Pople's medium size basis sets [up to 6‐311++G(3df, 3pd)] and Dunning's correlation consistent basis sets (cc‐pVXZ and aug‐cc‐pVXZ, X = D, T, Q). For each conformer, the intermolecular carbon–carbon separation was sampled in a step 0.1 Å for a range of 3–9 Å, resulting in a total of 732 configuration points calculated. The MP2 binding curves display significant anisotropy with respect to the relative orientations of the dimer. The potential curves at the complete basis set (CBS) limit were estimated using well‐established analytical extrapolation schemes. A 4‐site potential model with sites located at the hydrogen atoms was used to fit the ab initio potential data. This model stems from a hydrogen–hydrogen repulsion mechanism to explain the stability of the dimer structure. MD simulations using the ab initio PES show quantitative agreements on both the atom‐wise radial distribution functions and the self‐diffusion coefficients over a wide range of experimental conditions. © 2008 Wiley Periodicals, Inc. J Comput Chem 2009     

Estimation of isotropic nuclear magnetic shieldings in the CCSD(T) and MP2 complete basis set limit using affordable correlation calculations

A linear correlation between isotropic nuclear magnetic shielding constants for seven model molecules (CH₂O, H₂O, HF, F₂, HCN, SiH₄ and H₂S) calculated with 37 methods (34 density functionals, RHF, MP2 and CCSD(T)), with affordable pcS‐2 basis set and corresponding complete basis set results, estimated from calculations with the family of polarization‐consistent pcS‐n basis sets is reported. This dependence was also supported by inspection of profiles of deviation between CBS estimated nuclear shieldings and shieldings obtained with the significantly smaller basis sets pcS‐2 and aug‐cc‐pVTZ‐J for the selected set of 37 calculation methods. It was possible to formulate a practical approach of estimating the values of isotropic nuclear magnetic shielding constants at the CCSD(T)/CBS and MP2/CBS levels from affordable CCSD(T)/pcS‐2, MP2/pcS‐2 and DFT/CBS calculations with pcS‐n basis sets. The proposed method leads to a fairly accurate estimation of nuclear magnetic shieldings and considerable saving of computational efforts. Copyright © 2013 John Wiley & Sons, Ltd.     

Conventional strain energies of azetidine and phosphetane: Can density functional theory yield reliable results?

The conventional strain energies for azetidine and phosphetane are determined within the isodesmic, homodesmotic, and hyperhomodesmotic models. Optimum equilibrium geometries, harmonic vibrational frequencies, and corresponding electronic energies and zero‐point vibrational energies are computed for all pertinent molecular systems using self‐consistent field theory, second‐order perturbation theory, and density functional theory and using the correlation consistent basis sets cc‐pVDZ, cc‐pVTZ, and cc‐pVQZ. Single point fourth‐order perturbation theory, CCSD, and CCSD(T) calculations using the cc‐pVTZ and the cc‐pVQZ basis sets are computed using the MP2/cc‐pVTZ and MP2/cc‐pVQZ optimized geometries, respectively, to ascertain the contribution of higher order correlation effects and to determine if the quadruple‐zeta valence basis set is needed when higher order correlation is included. In the density functional theory study, eight different functionals are used including B3LYP, wB97XD, and M06‐2X to determine if any functional can yield results similar to those obtained at the CCSD(T) level. © 2012 Wiley Periodicals, Inc.     

Isolation and Characterization of the Free Phenylphosphinidene Chalcogenides C6H5P=O and C6H5P=S,the Phosphorous Analogues of Nitrosobenzene and Thionitrosobenzene

The structures and reactivities of organic phosphinidene chalcogenides have been mainly inferred from trapping or complexation experiments. Phosphinidene chalcogenide derivatives appear to be an elusive family of molecules that have been suggested as reactive intermediates in multiple organophosphorus reactions. The quest to isolate “free” phosphinidene chalcogenides remains a challenge in the field. Here, we present the synthesis, IR, and UV/Vis spectroscopic identification of hitherto elusive phenylphosphinidene oxide and phenylphosphinidene sulfide from the corresponding phosphonic diazide precursors. We isolated these higher congeners of nitroso‐ and thionitrosobenzene in argon matrices at 10 K. The spectral assignments are supported by B3LYP/6–311++G(3df,3pd) and MP2/cc‐pVTZ computations.     

Halogen switching of azacarbenes C2NH ground states at ab initio and DFT levels

Relative stabilities and singlet–triplet energy differences are calculated for 24 C₂NX azacarbenes (where X is H, F, Cl, and Br). Three skeletal arrangements are employed including azacyclopropenylidene, [(imino)methylene]carbene, and cyanocarbene. Halogens appear to alternate the electronic ground states of C₂NH azacarbenes, from triplet to singlet states, at MP3/6‐311++G**, B1LYP/6‐311++G**, B3LYP/6‐311++G**, MP2/6‐311++G**, MP4(SDTQ)/6‐311++G**, QCISD(T)/6‐311++G**, CCSD(T)/6‐311++G**, CCSD(T)/cc‐pVTZ, G1, and G2 levels of theory. The aromatic characters of singlet cyclic azacyclopropenylidenes are measured using GIAO–NICS calculations. Linear correlations are found between the B3LYP/6‐311++G** calculated LUMO–HOMO energy gaps (ΔE_{HOMO ‐ LUMO}) of the singlet carbenes versus their corresponding singlet–triplet energy separations (ΔE). Electrophilic characters are found for all singlet azacarbenes in their addition reactions to alkenes with the highest electrophilicity being exhibited for X = F. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:377–388, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20442     

An ab initio correlated study of the potential energy surface for the HOBr.H2O complex

The potential energy surface (PES) for the HOBr.H(2)O complex has been investigated using second- and fourth-order M?ller-Plesset perturbation theory (MP2, MP4) and coupled cluster theory with single and doubles excitations (CCSD), and a perturbative approximation of triple excitations (CCSD-T), correlated ab initio levels of theory employing basis sets of triple zeta quality with polarization and diffuse functions up to the 6-311++G(3dp,3df ) standard Pople's basis set. Six stationary points being three minima, two first-order transition state (TS) structures and one second-order TS were located on the PES. The global minimum syn and the anti equilibrium structure are virtually degenerated [DeltaE(ele-nuc) approximately 0.3 kcal mol(-1), CCSD-T/6-311++G(3df,3pd) value], with the third minima being approximately 4 kcal mol(-1) away. IRC analysis was performed to confirm the correct connectivity of the two first-order TS structures. The CCSD-T/6-311++G(3df,3pd)//MP2/6-311G(d,p) barrier for the syn<-->anti interconversion is 0.3 kcal mol(-1), indicating that a mixture of the syn and anti forms of the HOBr.H(2)O complex is likely to exist.     

Ab Initio Study on the Potential Energy Surfaces of B4 Cluster

The singlet and triplet potential energy surfaces (PES) for the isomerization and dissociation reactions of B₄ isomers have been investigated using ab initio methods. Ten B4 isomers have been identified and of these 10 species, 4 have not been reported previously. The singlet rhombic structure ¹1 is found to be the most stable on the B₄ surface, in agreement with the results of previous reports. Several isomerization and dissociation pathways have been found. On the singlet PES, the linear ¹3b can rearrange to rhombus ¹1 directly, while ¹3c rearranges to ¹1 through two‐step reactions involving a cyclic intermediate. On the triplet PES, the capped triangle structure ³2 undergoes ring opening to the linear isomer ³3b with a barrier of 34.8 kcal/mol and 44.9 kcal/mol, and the latter undergoes ring closure to the square structure ³1 with a barrier of 30.4 kcal/mol and 33.0 kcal/mol at the MP4/6–311+G(3df)//MP2/6–311G(d) and CCSD/aug‐cc‐pVTZ//MP2/6–311G(d) levels of theory, respectively. The direct decomposition of singlet B₄ yielding to B₃+B is shown to have a large endothermicity of 87.3 kcal/mol (CCSD), and that producing 2B₂ to have activation energy of 133.4 kcal/mol (CCSD).     

Protonated acetylene revisited

The potential energy surface for protonated acetylene has been re-examined with large basis sets and highly correlated methods. The energy difference of 3.6–3.8 kcal/mol between the classical structure and non-classical (bridged) structure computed with CCSD (T)/cc-pVQZ, CCSD(T)/6-311+G(3df,2pd), BD(T)/cc- pVQZ, BD(T)/6-311+G(3df,2pd) and CBS-APNO methods is in very good agreement with the best previous calculations, 3.7–4.0 kcal/mol. In contrast, BLYP, B3LYP, PW91, PBE and TPSS density functional methods do rather poorly, yielding −0.52. 0.29, 1.81, 2.16 and 0.62 kcal/mol, respectively, with the 6-311+G(3df,2pd) basis. MP2 calculations predict the classical structure to be a transition state; however, frequency calculations at the CCSD/6-311+G(3df,2pd) level of theory show that the classical structure is a local minimum. CCSD(T), BD(T) and CBS-APNO energy calculations along the MP2/6-311+G(3df,2pd) reaction path indicate that the classical structure is a shallow local minimum separated from the non-classical structure by a very small barrier of 0.11–0.13 kcal/mol. Because the barrier for proton exchange between the non-classical isomers via the classical structure is broad and nearly flat at the top, the tunneling splitting should be reduced, possibly accounting for the 15% difference between the calculated and experimental barrier heights. Contribution to the Fernando Bernardi Memorial Issue.     

Assessment of density functionals with long‐range and/or empirical dispersion corrections for conformational energy calculations of peptides

Density functionals with long‐range and/or empirical dispersion corrections, including LC‐ωPBE, B97‐D, ωB97X‐D, M06‐2X, B2PLYP‐D, and mPW2PLYP‐D functionals, are assessed for their ability to describe the conformational preferences of Ac‐Ala‐NHMe (the alanine dipeptide) and Ac‐Pro‐NHMe (the proline dipeptide) in the gas phase and in water, which have been used as prototypes for amino acid residues of peptides. For both dipeptides, the mean absolute deviation (MAD) is estimated to be 0.22–0.40 kcal/mol in conformational energy and 2.0–3.2° in torsion angles ? and ψ using these functionals with the 6‐311++G(d,p) basis set against the reference values calculated at the MP2/aug‐cc‐pVTZ//MP2/aug‐cc‐pVDZ level of theory in the gas phase. The overall performance is obtained in the order B2PLYP‐D ≈ mPW2PLYP‐D > ωB97X‐D ≈ M06‐2X > MP2 > LC‐ωPBE > B3LYP with the 6–311++G(d,p) basis set. The SMD model at the M06‐2X/6‐31+G(d) level of theory well reproduced experimental hydration free energies of the model compounds for backbone and side chains of peptides with MADs of 0.47 and 4.3 kcal/mol for 20 neutral and 5 charged molecules, respectively. The B2PLYP‐D/6‐311++G(d,p)//SMD M06‐2X/6‐31+G(d) level of theory provides the populations of backbone and/or prolyl peptide bond for the alanine and proline dipeptides in water that are consistent with the observed values. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010