Carbon monoxide coordination and reversible photodissociation in copper(I) pyridylalkylamine compounds

Systematic studies of CO coordination and photodissociation have been carried out for a series of copper(I) carbonyl compounds possessing tripodal tetradentate ligands, [CuI(L)(CO)]B(C6F5)4 (L = Me2N-TMPA (1Me2N), MeO-TMPA (1MeO), H-TMPA (1H), PMEA (2pmea), PMAP (2pmap), BQPA (3bqpa). Detailed structural, electrochemical, and infrared characterization has been accomplished. In addition, various experimental techniques were utilized to determine equilibrium binding constants (KCO), association (kCO), and dissociation (k-CO) rate constants, as well as the thermodynamic (DeltaH degrees , DeltaS degrees ) and activation parameters (DeltaH, DeltaS) that regulate these processes. With increased ligand-electron-donating ability, greater pi back-bonding results in stronger Cu-CO bonds, leading to KCO values on the order 1Me2N-CO > 1MeO-CO > 1H-CO. With systematic synthetic expansion of the five-membered chelate rings like 1R to six-membered chelate rings like 2R, the stability of the CO adduct decreases, 1H-CO > 2pmea-CO > 2pmap-CO. The CO-binding properties of 3bqpa did not follow trends observed for the other compounds, presumably because of its bulkier ligand framework. Through solid- and solution-state analyses, we concluded that the photolabile carbonyl species in solution possess a tridentate coordination mode, forming strictly five-membered chelate rings to the copper ion with one dangling arm of the tripodal ligand. Carbon monoxide reversibly photodissociated from complexes 1Me2N-CO, 1MeO-CO, 1H-CO, and 3bqpa-CO in coordinating (CH3CN) and weakly coordinating (THF) solvent but not from 2pmea-CO and 2pmap-CO. Comparisons to O2-binding data available for these copper complexes as well as to small molecule (O2, CO, NO) reactions with hemes and copper proteins are discussed.     

Synthetic and structural studies on [Fe2(SR)2(CN)x(CO)6-x](x-) as active site models for Fe-only hydrogenases.

A series of models for the active site (H-cluster) of the iron-only hydrogenase enzymes (Fe-only H2-ases) were prepared. Treatment of MeCN solutions of Fe2(SR)2(CO)6 with 2 equiv of Et4NCN gave [Fe2(SR)2(CN)2(CO)4](2-) compounds. IR spectra of the dicyanides feature four nu(CO) bands between 1965 and 1870 cm(-1) and two nu(CN) bands at 2077 and 2033 cm(-1). For alkyl derivatives, both diequatorial and axial-equatorial isomers were observed by NMR analysis. Also prepared were a series of dithiolate derivatives (Et4N)2[Fe2(SR)2(CN)2(CO)4], where (SR)2 = S(CH2)2S, S(CH2)3S. Reaction of Et4NCN with Fe2(S-t-Bu)2(CO)6 gave initially [Fe2(S-t-Bu)2(CN)2(CO)4](2-), which comproportionated to give [Fe2(S-t-Bu)2(CN)(CO)5](-). The mechanism of the CN(-)-for-CO substitution was probed as follows: (i) excess CN(-) with a 1:1 mixture of Fe2(SMe)2(CO)6 and Fe2(SC6H4Me)2(CO)6 gave no mixed thiolates, (ii) treatment of Fe2(S2C3H6)(CO)6 with Me3NO followed by Et4NCN gave (Et4N)[Fe2(S2C3H6)(CN)(CO)5], which is a well-behaved salt, (iii) treatment of Fe2(S2C3H6)(CO)6 with Et4NCN in the presence of excess PMe3 gave (Et4N)[Fe2(S2C3H6)(CN)(CO)4(PMe3)] much more rapidly than the reaction of PMe3 with (Et4N)[Fe2(S2C3H6)(CN)(CO)5], and (iv) a competition experiment showed that Et4NCN reacts with Fe2(S2C3H6)(CO)6 more rapidly than with (Et4N)[Fe2(S2C3H6)(CN)(CO)5]. Salts of [Fe2(SR)2(CN)2(CO)4](2-) (for (SR)2 = (SMe)2 and S2C2H4) and the monocyanides [Fe2(S2C3H6)(CN)(CO)5](-) and [Fe2(S-t-Bu)2(CN)(CO)5](-) were characterized crystallographically; in each case, the Fe-CO distances were approximately 10% shorter than the Fe-CN distances. The oxidation potentials for Fe2(S2C3H6)(CO)4L2 become milder for L = CO, followed by MeNC, PMe3, and CN(-); the range is approximately 1.3 V. In water,oxidation of [Fe2(S2C3H6)(CN)2(CO)4](2-) occurs irreversibly at -0.12 V (Ag/AgCl) and is coupled to a second oxidation.     

Acrylonitrile insertion reactions of cationic palladium alkyl complexes

The reactions of acrylonitrile (AN) with "L(2)PdMe+" species were investigated; (L(2) = CH(2)(N-Me-imidazol-2-yl)(2) (a, bim), (p-tolyl)(3)CCH(N-Me-imidazol-2-yl)(2) (b, Tbim), CH(2)(5-Me-2-pyridyl)(2) (c, CH(2)py'(2)), 4,4'-Me(2)-2,2'-bipyridine (d), 4,4'-(t)Bu(2)-2,2'-bipyridine (e), (2,6-(i)Pr(2)-C(6)H(3))N=CMeCMe=N(2,6-(i)Pr(2)-C(6)H(3)) (f)). [L(2)PdMe(NMe(2)Ph)][B(C(6)F(5))(4)] (2a-c) and [{L(2)PdMe}(2)(mu-Cl)][B(C(6)F(5))(4)] (2d-f) react with AN to form N-bound adducts L(2)Pd(Me)(NCCH=CH(2))(+) (3a-f). 3a-e undergo 2,1 insertion to yield L(2)Pd{CH(CN)Et}+, which form aggregates [L(2)Pd{CH(CN)Et}](n)(n)(+) (n = 1-3, 4a-e) in which the Pd units are proposed to be linked by PdCHEtCN- - -Pd bridges. 3f does not insert AN at 23 degrees C. 4a-e were characterized by NMR, ESI-MS, IR and derivatization to L(2)Pd{CH(CN)Et}(PR(3))+ (R = Ph (5a-e), Me (6a-c)). 4a,b react with CO to form L(2)Pd{CH(CN)Et}(CO)+ (7a,b). 7a reacts with CO by slow reversible insertion to yield (bim)Pd{C(=O)CH(CN)Et}(CO)+ (8a). 4a-e do not react with ethylene. (Tbim)PdMe+ coordinates AN more weakly than ethylene, and AN insertion of 3b is slower than ethylene insertion of (Tbim)Pd(Me)(CH(2)=CH(2))(+) (10b). These results show that most important obstacles to insertion polymerization or copolymerization of AN using L(2)PdR+ catalysts are the tendency of L(2)Pd{CH(CN)CH(2)R}+ species to aggregate, which competes with monomer coordination, and the low insertion reactivity of L(2)Pd{CH(CN)CH(2)R}(substrate)+ species.     

Structural and kinetic study of reversible CO2 fixation by dicopper macrocyclic complexes. From intramolecular binding to self-assembly of molecular boxes

A study of the reversible CO2 fixation by a series of macrocyclic dicopper complexes is described. The dicopper macrocyclic complexes [Cu2(OH)2(Me2p)](CF3SO3)2, 1(CF3SO3)2, and [Cu2(mu-OH)2(Me2m)](CF3SO3)2, 2(CF3SO3)2, (Scheme 1) containing terminally bound and bridging hydroxide ligands, respectively, promote reversible inter- and intramolecular CO2 fixation that results in the formation of the carbonate complexes [{Cu2(Me2p)}2(mu-CO3)2](CF3SO3)4, 4(CF3SO3)4, and [Cu2(mu-CO3)(Me2m)](CF3SO3)2, 5(CF3SO3)2. Under a N2 atmosphere the complexes evolve CO2 and revert to the starting hydroxo complexes 1(CF3SO3)2 and 2(CF3SO3)2, a reaction the rate of which linearly depends on [H2O]. In the presence of water, attempts to crystallize 5(CF3SO3)2 afford [{Cu2(Me2m)(H2O)}2(mu-CO3)2](CF3SO3)4, 6(CF3SO3)4, which appears to rapidly convert to 5(CF3SO3)2 in acetonitrile solution. [Cu2(OH)2(H3m)]2+, 7, which contains a larger macrocyclic ligand, irreversibly reacts with atmospheric CO2 to generate cagelike [{Cu2(H3m)}2(mu-CO3)2](ClO4)4, 8(ClO4)4. However, addition of 1 equiv of HClO4 per Cu generates [Cu2(H3m)(CH3CN)4]4+ (3), and subsequent addition of Et3N under air reassembles 8. The carbonate complexes 4(CF3SO3)4, 5(CF3SO3)2, 6(CF3SO3)4, and 8(ClO4)4 have been characterized in the solid state by X-ray crystallography. This analysis reveals that 4(CF3SO3)4, 6(CF3SO3)4, and 8(ClO4)4 consist of self-assembled molecular boxes containing two macrocyclic dicopper complexes, bridged by CO32- ligands. The bridging mode of the carbonate ligand is anti-anti-mu-eta1:eta1 in 4(CF3SO3)4, anti-anti-mu-eta2:eta1 in 6(CF3SO3)4 and anti-anti-mu-eta2:eta2 in 5(CF3SO3)2 and 8(ClO4)4. Magnetic susceptibility measurements on 4(CF3SO3)4, 6(CF3SO3)4, and 8(ClO4)4 indicate that the carbonate ligands mediate antiferromagnetic coupling between each pair of bridged CuII ions (J = -23.1, -108.3, and -163.4 cm-1, respectively, H = -JS1S2). Detailed kinetic analyses of the reaction between carbon dioxide and the macrocyclic complexes 1(CF3SO3)2 and 2(CF3SO3)2 suggest that it is actually hydrogen carbonate formed in aqueous solution on dissolving CO2 that is responsible for the observed formation of the different carbonate complexes controlled by the binding mode of the hydroxy ligands. This study shows that CO2 fixation can be used as an on/off switch for the reversible self-assembly of supramolecular structures based on macrocyclic dicopper complexes.     

二环戊二烯基四羰基二铁类化合物催化苯乙烯自由基聚合研究

以α 溴代异丁酸乙酯为引发剂 ,甲苯作溶剂 ,在温度 80℃下 ,研究了一系列二环戊二烯基四羰基二铁类化合物 [Cp′Fe(CO) 2 ]2 (Cp′ =C5H5,C9H7,C5HMe4 ,Me3SiC5H4 ,C5HPh4 ,t BuC5H4 )催化苯乙烯自由基聚合反应 .结果发现 ,简单环戊二烯基及茚基四羰基二铁类化合物催化苯乙烯自由基聚合都是不可控的 .当茂环上引入大位阻取代基时聚合反应明显变慢 .其中 [C5HMe4 Fe(CO2 ) ]2 在低转化率下分子量Mn 与转化率有很好的线性关系 ,[C5HPh4 Fe(CO) 2 ]2 催化苯乙烯本体聚合Mn 与转化率一直呈线性关系 ,且实际分子量与理论值接近 ,表明取合物的分子量是可控的 .叔丁基取代的化合物 (t BuC5H4 )Fe(CO2 ) ]2 催化苯乙烯聚合的数均分子量与转化率基本成线性关系 ,且分子量分布随转化率增大而变窄 ,表明体系为可控聚合体系 .     

M...HNR interactions in imino-bound diaryltriazene complexes: structure and fluxionality

The nominally square-planar coordination of the d(8) complexes [MClL(1)L(2)(p-XC(6)H(4)NNNHC(6)H(4)X-p)](M = Rh, L(1)= L(2)= CO, X = H, Me, Et or F; M = Ir, L(1)= L(2)= CO, X = Me; M = Pd or Pt, L(1)= Cl, L(2)= PPh(3), X = Me; M = Pd, L(1)L(2)=eta(3)-C(3)H(5), X = Me), with the triazene N-bonded via the imine group, is supplemented by an axial M...H-N interaction involving the terminal amino group.     

Use of the tetrahydroborate ligand as "gate-keeper" and protected hydride ligand: preparation and study of alkyl hydride and acyl hydride complexes of ruthenium(II)

Complex 3, [Ru(eta2-BH4)(CO)(Et)L2] (L = PMe2Ph) can be converted by nucleophiles L' {a, PMe2Ph; b, P(OMe)3; c, Me3CNC; d, CO} to alkyl and acyl complexes [Ru(eta1-BH4)(CO)(Et)L2L'] (4a), [Ru(eta2-BH4)(COEt)L2L'] (5a-d), and [Ru(eta1-BH4)(COEt)L2L'2] (7d and isomers 7c and 10c). Deprotection can then be achieved under conditions mild enough to allow study of the resulting alkyl hydride complexes [Ru(CO)(Et)HL2L'] (1a, 1b) and acyl hydride complexes [Ru(COEt)HL2L'2] (8c, 8d) prior to elimination of ethane and propanal respectively, with formation of ruthenium(0) complexes [Ru(CO)L2L'2] (6a, 6b, 6d). With Me3CNC, however, the final product is (depending on the solvent used) [Ru(CNCMe3)2{C(H)NCMe3}(COEt)L2] (9c) or [Ru(CNCMe3)3(COEt)L2]+ (11c). Successive treatment of [Ru(eta2-BH4)(CO)HL2], , with ethene and then CO yields propanal, but turning this into a catalytic cycle is hindered by the greater readiness of to yield propanal non-catalytically (reacting with CO) than catalytically (reacting with H2).     

Ethylene oligomerisation and polymerisation with nickel phosphanylenolates bearing electron-withdrawing substituents: Structure-reactivity relationships

Three SHOP-type catalysts, in which the C=C(O) double bond was substituted by electron-withdrawing substituents, [Ni{Ph2PC(R1)=C(R2)O}Ph(PPh3)] (2: R1,R2 = -C(Me)=NN(Ph)-; 3: R1 = CO2Et, R2 = Ph; 4: R1 = CO2Et, R2 = CF3), were assessed as ethylene-oligomerisation and -polymerisation catalysts and compared to Keim's complex, [Ni{Ph2PCH=C(Ph)O}Ph(PPh3)] (1). A rationale for the influence of the double-bond substituents of the P,O-chelate unit on the catalytic properties is proposed, on the basis of X-ray diffraction studies, spectroscopic data and DFT-B3 LYP calculations. Whatever their relative electron-withdrawing strength, the R1 and R2 substituents induce an increase in activity with respect to catalyst 1. For those systems in which the basicity of the oxygen atom is decreased relative to that of the phosphorus atom, the chain-propagation rate increases with respect to that for catalyst 1. Reduction of the basicity of the P relative to that of the O, however, induces higher chain-termination rates.     

Imidazole substituent effects on oxidative reactivity of tripodal(imid)2(thioether)CuI complexes

In the search for new bis(imidazole)thioether (BIT) copper complexes that accurately mimic the electronic and reactivity features of the CuM site of copper hydroxylase enzymes, a set of tripodal BIT ligands 4a, b- 6a, b has been synthesized that vary according to the imidazole C-(Ph or H) and N-(H or Me) substituents, as well as the position (2- or 4-) of the tripodal attachment. Corresponding [(BIT)Cu(L)](PF6) complexes 7a, b', 8a, b', and 9a', b' [L=CO (a), CH3CN (b)] have been prepared and characterized spectroscopically. The IR spectra of 7a- 9a (L=CO), specifically nu(CO), show little variation (2090-2100 cm(-1)), suggesting a similar electronic character of the Cu centers. In contrast, cyclic voltammetric analysis of these compounds (L=CH3CN) reveals quasi-reversible oxidation waves with significant variation of Epa in the range of + 0.45-0.57 V vs Fc/Fc(+), depending on the imidazole substituents. Each of the [(BIT)Cu(CH 3CN)]PF6 complexes reacts with dioxygen to form [(BIT)Cu(II) 2(mu-OH) 2](PF6)2 derivatives, 10- 12, but they vary considerably in their relative reactivity, following the same trend as the ease of their electrochemical oxidation, that is, [(2-BIT (NMe))Cu(CH 3CN)](+) ( 9b')>[(4-BIT (Ph,NMe))Cu(CH3CN)](+) ( 8b')>[(2-BIT (Ph2,NMe))Cu(CH3CN)](+) (1a')>[(4-BIT (Ph,NH))Cu(CH3CN)](+) (7b'). Thus, N-Me substitution and 4-tethering on the imidazole unit increase oxidation and oxygenation reactivity, while Ph-substitution and 2-tethering decrease reactivity. PM3 and DFT calculations are employed to analyze the relative stability, the electronic features, the Cu-CO vibrtional frequency, and the electrochemical and oxidative reactivity of the complexes.     

Addition products of a P(III)-isothiocyanate to dialkyl acetylenedicarboxylates: a spirocyclic phosphinimine and a triphosphorus heterocycle with tetra- and penta-coordinate phosphorus

Treatment of the P(III) isothiocyanate CH2[6-t-Bu-4-Me-C6H2O]2PNCS (1) with dimethyl acetylenedicarboxylate (DMAD) or diethyl acetylenedicarboxylate (DEAD) yields the spirocyclic phosphinimines CH2[6-t-Bu-4-Me-C6H2O]2P[NC(S)C(CO2R)C(CO2R)][R=Me (2), Et (3)], in a reaction unlike those of organic isocyanates. From the reaction of 1 with DEAD, a second product, the triphosphorus compound 5, with the composition [2x1+3] but with a completely reorganized structure {CH2[6-t-Bu-4-Me-C6H2O]2P=C(CO2Et)C(CO2Et)=CN-}{CH2[6-t-Bu-4-Me-C6H2O]2P(NCS)}-SC=N-P(S)[(OC6H2-6-t-Bu-4-Me)2CH2] with tetra- and penta-coordinate phosphorus, is also isolated. Structure and reactivity of these compounds are discussed. Addition of 2,2,2-trifluoroethanol to 2 or 3 leads to the pentacoordinate phosphorus compounds [CH2(6-t-Bu-4-Me-C6H2O)2P(OCH2CF3){C(CO2R)C(CO2R)-C(S)-NH-}][R=Me (6), Et (7)]. The phosphonate [CH2(6-t-Bu-4-Me-C6H2O)2P(O)C(CO2Et)=C(CO2Et)-C(S)-NH2] (8) is obtained by evaporating a solution of 7 in open air.     

Substituent effects on indium-phosphorus bonding in (4-RC6H4S)3In.PR'3 adducts (R = H, Me, F; R' = Et, Cy, Ph): a spectroscopic, structural, and thermal decomposition study

The tris(arylthiolate)indium(III) complexes (4-RC(6)H(4)S)(3)In [R = H (5), Me (6), F (7)] were prepared from the 2:3 reaction of elemental indium and the corresponding aryl disulfide in methanol. Reaction of 5-7 with 2 equiv of the appropriate triorganylphosphine in benzene or toluene resulted in isolation of the indium-phosphine adduct series (4-RC(6)H(4)S)(3)In.PR'(3) [R = H, R' = Et (5a), Cy (5b), Ph (5c); R = Me, R' = Et (6a), Cy (6b), Ph (6c); R = F, R' = Et (7a), Cy (7b), Ph (7c)]. These compounds were characterized via elemental analysis, FT-IR, FT-Raman, solution (1)H, (13)C{(1)H}, (31)P{(1)H}, and (19)F (7a-c) NMR spectroscopy, and X-ray crystallography (5c, 6a, 6c, and 7a). NMR spectra show retention of the In-P bond in benzene-d(6) solution, with phosphine (31)P{(1)H} signals shifted downfield compared to the uncoordinated ligand. The X-ray structures show monomeric 1:1 adduct complexes in all cases. The In-P bond distance [2.5863(5)-2.6493(12) A] is influenced significantly by the phosphine substituents but is unaffected by the substituted phenylthiolate ligand. Relatively low melting points (88-130 degrees C) are observed for all adducts, while high-temperature thermal decomposition is observed for the indium thiolate reactants 5-7. DSC/TGA and EI-MS data show a two-step thermal decomposition process, involving an initial loss of the phosphine moiety followed by loss of thiolate ligand.     

The first acetimine gold(I) and gold(III) complexes and the first acetonine complexes

Ketimino(phosphino)gold(I) complexes of the type [Au[NR=C(Me)R']L]X (X = ClO4, R = H, L = PPh3, R'=Me (la), Et (2a); L=PAr3 (Ar=C6H4OMe-4), R'=Me (1b), Et (2b); L=PPh3, R=R'=Me (3); X= CF3SO3 (OTf), L=PPh3, R=R'=Me (3'); R=Ar, R'=Me (4)) have been prepared from [Au(acac)L] (acac = acetyl acetonate) and ammonium salts [RNH3]X dissolved in the appropriate ketone MeC(O)R'. Complexes [Au(NH=CMe2)2]X (X = C1O4 (6), OTf (6')) were obtained from solutions of [Au(NH3)2]X in acetone. The reaction of 6 with PPN[AuCl2] or with PhICl2 gave [AuCl(NH=CMe2)] (7) or [AuCI2(NH=CMe2)2]ClO4 (8), respectively. Complex 7 was oxidized with PhICl2 to give [AuCl3(NH=CMe2)] (9). The reaction of [AuCl(tht)] (tht = tetrahydrothiophene), NaClO4, and ammonia in acetone gave [Au(acetonine)2]ClO4 (10) (acetonine = 2,2,4,4,6-pentamethyl-2,3,4,5-tetrahydropyrimidine) which reacted with PPh3 or with PPN[AuCl2] to give [Au(PPh3)(acetonine)]ClO4 (11) or [AuCl(acetonine)] (12), respectively. Complex 11 reacts with [Au(PPh3)(Me2CO)]ClO4 to give [(AuPPh3)2(mu-acetonine)](ClO4)2 (13). The reaction of AgClO4 with acetonine gave [Ag(acetonine)(OClO3)] (14). The crystal structures of [Au(NH2Ar)(PPh3)]OTf (5), 6' and 10 have been determined.     

Bimetallic anilido-aldimine zinc complexes for epoxide/CO2 copolymerization

Acyclic o-phenylene-bridged bis(anilido-aldimine) compounds, o-C(6)H(4){C(6)H(2)R(2)N=CH-C(6)H(4)-(H)N(C(6)H(3)R'(2))}(2) and related 30-membered macrocyclic compounds, o-C(6)H(4){C(6)H(2)R'(2)N=CH-C(6)H(4)-(H)N-C(6)H(2)R(2)}(2) (o-C(6)H(4)) are prepared. Successive additions of Me(2)Zn and SO(2) gas to the bis(anilido-aldimine) compounds afford quantitatively dinuclear mu-methylsulfinato zinc complexes, o-C(6)H(4){(C(6)H(2)R(2)N=CH-C(6)H(4)-N(C(6)H(3)R'(2))-kappa(2)-N,N)Zn(mu-OS(O)Me)}(2) (R = iPr and R' = iPr, 29; R = Et and R' = Et, 30; R = Me and R'= Me, 31; R = Me and R' = iPr, 32; R = Et and R' = Me, 33; R = Et and R' = iPr, 34; R = iPr and R' = Et, 35) and o-C(6)H(4){C(6)H(2)R'(2)N=CH-C(6)H(4)-N-C(6)H(2)R(2)-kappa(2)-N,N)Zn(mu-OS(O)Me)}(2) (o-C(6)H(4)) (R = Et and R'= Et, 36; R = Me and R' = Me, 37; R = iPr and R' = Me, 38; R = Et and R' = Me, 39; R = Me and R'= iPr, 40). Molecular structures of 34 and 40 are confirmed by X-ray crystallography. Complexes 30-35 show high activity for cyclohexene oxide/CO(2) copolymerization at low [Zn]/[monomer] ratio (1:5600), whereas the complex of mononucleating beta-diketiminate {[(C(6)H(3)Et(2))N=C(Me)CH=C(Me)N(C(6)H(3)Et(2))]Zn(mu-OS(O)Et)}(2) shows negligible activity in the same condition. Activity is sensitive to the N-aryl ortho substituents and the highest activity is observed with 32. Turnover number up to 2980 and molecular weight (M(n)) up to 284 000 are attained with 32 at such a highly diluted condition as [Zn]/[monomer] = 1:17 400. Macrocyclic complexes 36-40 show negligible activity for copolymerization.     

Bimetallic fluorine-substituted anilido-aldimine zinc complexes for CO2/(cyclohexene oxide) copolymerization

Regioselective nucleophilic aromatic substitution of an o-fluorine occurs to afford fluorine-substituted o-phenylene-bridged bis(anilido-aldimine) compounds o-C6H4[(C6H2R2)N=CH-C6F4-(H)N(C6H3R'2)]2 when Li(H)N-C6H3R'2 (R' = iPr, Et, Me) is reacted with o-C6H4[(C6H2R2)N=CH-C6F5]2 (R = iPr, Et, Me) in a nonpolar solvent such as diethyl ether or toluene. Successive additions of Me2Zn and SO2 gas to the bis(anilido-aldimine) compounds afford quantitatively dinuclear mu-methylsulfinato zinc complexes o-C6H4[[(C6H2R2)N=CH-C6F4-N(C6H3R'2)-kappa2N,N]Zn(mu-OS(O)Me)]2 (R = iPr, R' = iPr, 3a; R = iPr, R' = Me, 3c; R = Et, R' = (i)Pr, 3d; R = Et, R' = Et, 3e; R = Et, R' = Me, 3f; R = Me, R' = iPr, 3g; R = Me, R' = Et, 3h; R = Me, R' = Me, 3i). The molecular structure of 3c was confirmed by X-ray crystallography. Fluorine-substituted complexes 3a-i show significantly higher TOF (turnover frequencies) than the unfluorinated analogues for CO2/(cyclohexene oxide) copolymerization. The TOF is highly sensitive to the substituents R and R', and the highest TOF (2480 h(-1)) is obtained with 3g (R = Me, R' = iPr). Complex 3g is less sensitive to the residual protic impurities present in the monomers and shows activity at such a low catalyst concentration as [Zn]:[cyclohexene oxide] = 1:50,000, at which the unfluorinated analogue is completely inactive. By realizing the activity at such an extremely low [Zn]:[cyclohexene oxide] ratio, we achieve a high TON (turnover number) up to 10,100. High-molecular-weight polymers (M(n), 100,000-200,000) are obtained with a rather broad molecular-weight distribution (M(w)/M(n), 1.3-2.5). The obtained polymers are not perfectly alternating, and variable carbonate linkages (65-85%) are observed depending on the N-aryl ortho substituents R and R' and the polymerization conditions.     

Spectral, structural, and electrochemical properties of ruthenium porphyrin diaryl and aryl(alkoxycarbonyl) carbene complexes: influence of carbene substituents, porphyrin substituents, and trans-axial ligands

A wide variety of ruthenium porphyrin carbene complexes, including [Ru(tpfpp)(CR(1)R(2))] (CR(1)R(2) = C(p-C(6)H(4)Cl)(2) 1 b, C(p-C(6)H(4)Me)(2) 1 c, C(p-C(6)H(4)OMe)(2) 1 d, C(CO(2)Me)(2) 1 e, C(p-C(6)H(4)NO(2))CO(2)Me 1 f, C(p-C(6)H(4)OMe)CO(2)Me 1 g, C(CH==CHPh)CO(2)CH(2)(CH==CH)(2)CH(3) 1 h), [Ru(por)(CPh(2))] (por=tdcpp 2 a, 4-Br-tpp 2 b, 4-Cl-tpp 2 c, 4-F-tpp 2 d, tpp 2 e, ttp 2 f, 4-MeO-tpp 2 g, tmp 2 h, 3,4,5-MeO-tpp 2 i), [Ru(por)[C(Ph)CO(2)Et]] (por=tdcpp 2 j, tmp 2 k), [Ru(tpfpp)(CPh(2))(L)] (L = MeOH 3 a, EtSH 3 b, Et(2)S 3 c, MeIm 3 d, OPPh(3) 3 e, py 3 f), and [Ru(tpfpp)[C(Ph)CO(2)R](MeOH)] (R = CH(2)CH==CH(2) 4 a, Me 4 b, Et 4 c), were prepared from the reactions of [Ru(por)(CO)] with diazo compounds N(2)CR(1)R(2) in dichloromethane and, for 3 and 4, by further treatment with reagents L. A similar reaction of [Os(tpfpp)(CO)] with N(2)CPh(2) in dichloromethane followed by treatment with MeIm gave [Os(tpfpp)(CPh(2))(MeIm)] (3 d-Os). All these complexes were characterized by (1)H NMR, (13)C NMR, and UV/Vis spectroscopy, mass spectrometry, and elemental analyses. X-ray crystal structure determinations of 1 d, 2 a,i, 3 a, b, d, e, 4 a-c, and 3 d-Os revealed Ru==C distances of 1.806(3)-1.876(3) A and an Os==C distance of 1.902(3) A. The structure of 1 d in the solid state features a unique "bridging" carbene ligand, which results in the formation of a one-dimensional coordination polymer. Cyclic voltammograms of 1 a-c, g, 2 a-d, g-k, 3 b-d, 4 a, b, and 3 d-Os show a reversible oxidation couple with E(1/2) values in the range of 0.06-0.65 V (vs Cp(2)Fe(+/0)) that is attributable to a metal-centered oxidation. The influence of carbene substituents, porphyrin substituents, and trans-ligands on the Ru==C bond was examined through comparison of the chemical shifts of the pyrrolic protons in the porphyrin macrocycles ((1)H NMR) and the M==C carbon atoms ((13)C NMR), the potentials of the metal-centered oxidation couples, and the Ru==C distances among the various ruthenium porphyrin carbene complexes. A direct comparison among iron, ruthenium, and osmium porphyrin carbene complexes is made.     

Zinc complexes of Ttz(R,Me) with O and S donors reveal differences between Tp and Ttz ligands: acid stability and binding to H or an additional metal (Ttz(R,Me) = tris(3-R-5-methyl-1,2,4-triazolyl)borate; R = Ph, tBu)

Alkylzinc complexes, (Ttz(R,Me))ZnR' (R = tBu, Ph; R' = Me, Et), show interesting reactivity with acids, bases and water. With acids (e.g. fluorinated alcohols, phenols, thiophenol, acetylacetone, acetic acid, HCl and triflic acid) zinc complexes of the conjugate base (CB), (Ttz(R,Me))ZnCB, are generated. Thus the B-N bonds in Ttz ligands are acid stable. (Ttz(R,Me))ZnCB complexes were characterized by (1)H, (13)C-NMR, IR, MS, elemental analysis, and, in most cases, single crystal X-ray diffraction. The four coordinate crystal structures included (Ttz(R,Me))Zn(CB) [where R = Ph, CB (conjugate base) = OCH(2)CF(3) (2), OPh (6), SPh (8), p-OC(6)H(4)(NO(2)) (10); R = tBu, CB = OCH(CF(3))(2) (3), OPh (5), SPh (7)*, p-OC(6)H(4)(NO(2)) (9) (* indicates a rearranged Ttz ligand)]. The use of bidentate ligands resulted in structures [(Ttz(Ph,Me))Zn(CB) (CB = acac (12), OAc (14))] in which the coordination geometries are five, and intermediate between four and five, respectively. Interestingly, three forms of (Ttz(Ph,Me))Zn(p-OC(6)H(4)(NO(2))) (10) were analyzed crystallographically including a Zn coordinated water molecule in 10(H(2)O), a coordination polymer in 10(CP), and a p-nitrophenol molecule hydrogen bonded to a triazole ring in 10(Nit). Ttz ligands are flexible since they are capable of providing κ(3) or κ(2) metal binding and intermolecular interactions with either a metal center or H through the four position nitrogen (e.g. in 10(CP) and HTtz(tBu,Me)·H(2)O, respectively). Preliminary kinetic studies on the protonolysis of LZnEt (L = Ttz(tBu,Me), Tp(tBu,Me)) with p-nitrophenol in toluene at 95 °C show that these reactions are zero order in acid and first order in the LZnEt.     

Synthesis and reactivity of low-coordinate iron(II) fluoride complexes and their use in the catalytic hydrodefluorination of fluorocarbons

Transition metal fluoride complexes are of interest because they are potentially useful in a multitude of catalytic applications, including C-F bond activation and fluorocarbon functionalization. We report the first crystallographically characterized examples of molecular iron(II) fluorides: [L(Me)Fe(mu-F)]2 (1(2)) and L(tBu)FeF (2) (L = bulky beta-diketiminate). These complexes react with donor molecules (L'), yielding trigonal-pyramidal complexes L(R)FeF(L'). The fluoride ligand is activated by the Lewis acid Et2O.BF3, forming L(tBu)Fe(OEt2)(eta1-BF4) (3), and is also silaphilic, reacting with silyl compounds such as Me3SiSSiMe3, Me3SiCCSiMe3, and Et3SiH to give new thiolate L(tBu)FeSSiMe3 (4), acetylide L(tBu)FeCCSiMe3 (5), and hydride [L(Me)Fe(mu-H)]2 (6(2)) complexes. The hydrodefluorination (HDF) of perfluorinated aromatic compounds (hexafluorobenzene, pentafluoropyridine, and octafluorotoluene) with a silane R3SiH (R3 = (EtO)3, Et3, Ph3, (3,5-(CF3)2C6H3)Me2) is catalyzed by addition of an iron(II) fluoride complex, giving mainly the singly hydrodefluorinated products (pentafluorobenzene, 2,3,5,6-tetrafluoropyridine, and alpha,alpha,alpha,2,3,5,6-heptafluorotoluene, respectively) in up to five turnovers. These catalytic perfluoroarene HDF reactions proceed with activation of the C-F bond para to the most electron-withdrawing group and are dependent on the degree of fluorination and solvent polarity. Kinetic studies suggest that hydride generation is the rate-limiting step in the HDF of octafluorotoluene, but the active intermediate is unknown. Mechanistic considerations argue against oxidative addition and outer-sphere electron transfer pathways for perfluoroarene HDF. Fluorinated olefins are also hydrodefluorinated (up to 10 turnovers for hexafluoropropene), most likely through a hydride insertion/beta-fluoride elimination mechanism. Complexes 1(2) and 2 thus provide a rare example of a homogeneous system that activates C-F bonds without competitive C-H activation and use an inexpensive 3d transition metal.     

ortho-Metallated complexes of platinum(II) and diplatinum(I) containing the carbanions (2-diphenylphosphino)phenyl and (2-diphenylphosphino)-n-tolyl (n = 5, 6)

When the ortho-metallated complexes cis-[Pt(kappa(2)-C6H3-5-R-2-PPh2)2] (R = H 1, Me 2) are either heated in toluene or treated with CO at room temperature, one of the four-membered chelate rings is opened irreversibly to give dinuclear isomers [Pt2(kappa(2)-C6H3-5-R-2-PPh2)2(mu-C6H3-5-R-2-PPh2)2] (R = H 10, Me 11). A single-crystal X-ray diffraction study shows the Pt...Pt separation in 10 to be 3.3875(4) A. By-products of the reactions of 1 and 2 with CO are polymeric isomers (R = H 13, Me 14) in which one of the P-C ligands is believed to bridge adjacent platinum atoms intermolecularly. In contrast to the behaviour of 1 and 2, when cis-[Pt(kappa(2)-C6H3-6-Me-2-PPh2)2] (cis-3) is heated in toluene, the main product is trans-3, and reaction of cis-3 with CO gives a carbonyl complex [Pt(CO)(kappa(1)-C-C6H3-6-Me-2-PPh2)(2-C6H3-6-Me-2-PPh2)] 15, in which one of the carbanions is coordinated only through the carbon. Formation of a dimer analogous to 10 or 11 is sterically hindered by the 6-methyl substituent. Comproportionation of 1 or 2 with [Pt(PPh3)2L] (L = PPh3, C2H4) gives diplatinum(I) complexes [Pt2(mu-C6H3-5-R-2-PPh2)2(PPh3)2] (R = H 16, Me 17). An X-ray diffraction study shows that 17 contains a pair of planar-coordinated metal atoms separated by 2.61762(16) A. There is no evidence for the formation of an analogue containing mu-C6H3-6-Me-2-PPh2. The axial PPh3 ligands of 16 are readily replaced by ButNC giving [Pt2(mu-2-C6H4PPh2)2(CNBut)2] 18, which is protonated by HBF4 to form a mu-hydridodiplatinum(II) salt [Pt2(mu-H)(mu-2-C6H4PPh2)2(CNBut)2]BF4 [21]BF4. The J(PtPt) values in [21]BF4 and 18, 2700 Hz and 4421 Hz, respectively, reflect the weakening of the Pt-Pt interaction caused by protonation. Similarly, 16 and 17 react with the electrophiles iodine and strong acids to give salts of general formula [Pt2(mu-Z)(mu-C6H3-5-R-2-PPh2)2(PPh3)2]Y (Y = Z = I, R = H 19+, Me 20+; Z = H, Y = BF4, PF6, OTf, R = H 22+; Z = H, Y = PF6, R = Me 23+). A single-crystal X-ray diffraction study of [23]PF6 shows that the cation has an approximately A-frame geometry, with a Pt-Pt separation of 2.7888(3) A and a Pt-H bond length of 1.62(1) A, and that the 5-methyl substituents have undergone partial exchange with the 4-hydrogen atoms of the PPh2 groups of the bridging carbanion. The latter observation indicates that the added proton of [23]+ undergoes a reversible reductive elimination-oxidative addition sequence with the Pt-C(aryl) bonds.     

Regioselective intramolecular oxidation of phenols and anisoles by dioxiranes generated in situ

A novel method for regioselective oxidation of phenols and anisoles has been developed in which dioxiranes, generated in situ from ketones and Oxone, oxidize phenol derivatives in an intramolecular fashion. A series of ketones with electron-withdrawing groups, such as CF(3), COOMe, and CH(2)Cl, were attached to phenols, anisoles, or aryl rings via a C(2) or C(3) methylene linker. In a homogeneous solvent system of CH(3)CN and H(2)O, oxidation of phenol derivatives 1-10 afforded spiro 2-hydroxydienones in 24-55% yields regardless of the presence of other substituents (ortho Me, meta Me or Br) on the aryl ring and the length of the linker. Experimental evidences were provided to support the mechanism that involves a regioselective pi bond epoxidation of aryl rings followed by epoxide rearrangement and hemiketal formation.     

Reaktionen von carbonylcyclopentadienylhydriden des molybdäns und des wolframs mit inaminen

The hydrides (η⁵-C₅H₅)(CO)₃MH (M = Mo, W) react with ynamines R′CCNR₂ under mild conditions to form 1 : 1 adducts. According to the ¹H and ¹³C NMR spectra depending on the metal and the ynamine substituents carbene acyl chelate or complexes with η³-aminoacryloyl ligands are formed:

A Dicarbene chelate compound is obtained by alkylation of I, R = Et, R′ = Me. CC-η² keteneimmonium complexes are formed in the reaction of the phosphite substituted hydrides (η⁵-C₅H₅)(CO)₂P(OMe)₃MH (M = Mo, W) with MeCCN Et; an intermediate 1-aminovinyl compound has been isolated.