A new approach for the synthesis of polyaniline (PANI) nanostructures under UV light illumination has been developed, which is the first report of a templateless chemical process for preparing pure PANI nanowires. The acceleration effect of photo‐assistance on the polymerization can promote the homogeneous nucleation and elongation of the nanofibers and nanowires, leading to easy preparation of tunable diameters of the nanowires and nanofibers of PANI.
The aim of this study is to investigate the feasibility and efficacy of PEC nanoparticles as delivery system for cancer chemotherapy. Assembly of paclitaxel‐loaded nanoparticles with high loading efficiency and narrow‐size distribution is successful. For non‐invasive in vivo tracing, nanoparticle blends of chelator bearing poly(lactide) with PEC and PLGA are successfully prepared. Pharmacokinetic studies in mice reveal a twofold higher circulation time of PEC as compared to PLGA. A tumor model shows an accumulation of PEC NPs in cancerous tissue and a higher anti‐tumor efficiency compared to the standard Taxol?, which is reflected in a significantly slower tumor growth compared to the NaCl control group.
Summary: A step‐by‐step ‘all‐electrochemical’ approach has been presented to develop a multilayer structure of conducting polymers for gas sensors. The integrated structure includes a sensitive layer (polyaniline, PANI) and a conductive bridge consisting of poly(3,4‐ethylenedioxythiophene) (PEDOT). Good sensitivity, stability, and response of the multilayer material to gaseous HCl indicate a possible application of conductive polymers to provide a binding of sensitive elements in sensors or other fields.
The conducting multilayer material, Au/pATP/PANI/PEDOT, was synthesized electrochemically. 相似文献
The key to developing novel applications of SWNTs in biotechnology and biomedicine is to improve their biocompatibility and solubility in water and to assemble them into useful architectures. We describe how amylose can help to solubilize SWNTs and wrap around SWNTs into helical superstructures with periodic pitch. FT‐IR, Raman spectroscopy, 1H NMR and HR‐TEM are used to confirm the generation of amylose/SWNTs complexes (A/S‐C). It is demonstrated that most of the A/S‐C have similar diameters (ca. 20–30 nm) and a helical morphology with a pitch of ca. 14 nm. A test of Hela cell viability revealed that the A/S‐C had much better biocompatibility than SWNTs.
We present the first fast and facile microwave assisted synthesis of polyaniline (PANI) nanofibers (“MWA synthesis”). Under conventional synthesis (CS), the polymer was produced with 79.7% yield after 5 h at ambient temperature. However, under microwave irradiation, the nanofibers were produced with yield of 76.2% after only 5 min, i.e., with 78.8% after 20 min at ambient temperature. The FTIR and Raman spectra show the PANI structure in all samples either synthesized conventionally or in the microwave. SEM and TEM confirm the nanofibrillar morphology.
Summary: Nanoscaled polyaniline (PANI) fibers with 17–30 nm in diameter were successfully prepared by oxidation polymerization using ferric hydrochloride (FeCl3 · 6H2O) as an oxidant in the presence of p‐toluenesulfonic acid (p‐TSA), β‐naphthalenesulfonic acid (β‐NSA), and camphorsulfonic acid (CSA) as the dopants. The resulting nanofibers show smaller diameter, higher crystallinity and conductivity (10−1 S · cm−1) compared with the nanofibers oxidized by ammonium persulfate (APS), which may be due to the lower oxidation/reduction potential of FeCl3.
SEM images of the PANI nanofibers prepared by oxidation polymerization using ferric hydrochloride as an oxidant. 相似文献
Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.
Water‐dispersible PEGylated nanoparticles (NPs) presenting amine‐reactive conjugation sites at their surfaces were synthesized and their ability to react with amines was demonstrated. An amphiphilic block copolymer bearing an N‐succinimidyl ester at its water‐soluble end was synthesized by the consecutive controlled radical polymerization of poly(ethylene glycol) methacrylate and styrene from a functional halide initiator. After purification of the copolymer, NPs of approximately 40 nm were obtained by a self‐assembly process in water. The reactivity of the NPs was evidenced by reacting them with primary amines, including a fluorescent dye. The activated ester remained stable throughout all synthetic steps and a nearly quantitative coupling efficiency was obtained.
This paper highlights the powerful combination of reversible addition–fragmentation chain transfer (RAFT) radical polymerization and various click/coupling chemistries. This is not an exhaustive review but rather an overview demonstrating the impressive possibilities that the “marriage” of these two synthetic approaches offers in modern macromolecular design and synthesis.
In light of the increasing demand for ultra rapid and mild conjugation chemistries for use in macromolecular chemistry, the present Feature Article provides a critical overview of the very latest developments in this field. The principal aim, therefore, is the provision of a quick selection guide to aid in the formulation of a design strategy for novel functional materials and to provide recommendations for future developments in the chemistries discussed.
Summary: We investigate a series of glassy polymer actuators which are found to bend rapidly and reversibly in response to changes in the solvent environment. The actuators are based on hydrogen‐bonded liquid crystal networks, and bending motion is created using director profiles engineered to take advantage of the network swelling anisotropy. Strongly polar solvents easily swell the network, forcing bending in one direction, while the less polar solvents extract water to force bending in the opposite direction.
Shape variation of twisted configuration liquid crystal polymer films in acetone and water. 相似文献
The main challenge of commercialization of the hydrogen economy is the lack of convenient and safe hydrogen storage materials, which can adsorb and release a significant amount of hydrogen at ambient conditions. Finding and designing suitable cost‐effective materials are vital requirements to overcome the drawbacks of investigated materials. Because of its outstanding electronic, thermal, and chemical properties, the electrically conducting polyaniline (PANI) has a high potential in hydrogen storage applications. In this review, the progress in the use of different structures of conducting PANI, its nanocomposites as well as activated porous materials based on PANI as hydrogen storage materials is presented and discussed. The effect of the unique electronic properties based on the π‐electron system in the backbone of these materials in view of the hydrogen uptake and the relevant mechanisms are highlighted.
Camphor sulfonic acid (CSA) doped polyaniline (PANI) nanotubes (175 nm in outer diameter and 120 nm in inner diameter) were synthesized successfully by a self‐assembly method. It is found that the room‐temperature conductivity of an individual PANI nanotube is 30.5 S · cm−1; in particular, the intrinsic resistance of an individual nanotube (30 kΩ) is much smaller than the contact resistance of crossed nanotubes (500 kΩ).
A SEM image of two crossed PANI‐CSA nanotubes and the attached Pt electrodes. 相似文献
Summary: A pH‐sensitive block copolymer is synthesized by step polymerization and its pH‐sensitive micellization‐demicellization behavior is studied. This polymer has a hydrophilic MPEG (shell) and hydrophobic but pH‐sensitive poly(β‐amino ester) (core), which can form a self‐assembled micelle. As confirmed by fluorescence spectroscopy and dynamic light scattering (DLS), this polymer shows a sharp pH‐sensitive micellization‐demicellization behavior. It is confirmed that the pH sensitivity is affected by the molecular weight ratio between the MPEG and poly(β‐amino ester).
Plots of the intensity ratio I337/I334 (from pyrene excitation spectra): a) vs. pH for copolymer samples and b) vs. log (concentration) for M1. 相似文献
In this communication, β‐cyclodextrin modified quantum dots were used as a water‐soluble “supramolecular” cross‐linker (SCL) because of its surface's supramolecular activity. The guest monomer‐loaded SCL (mSCL) can be used to copolymerize with water‐soluble monomers leading to transparent hybrid supramolecular hydrogels. This simple and versatile method opens new venues for the preparation of hybrid supramolecular hydrogels and the host–guest chemistry of cyclodextrins.
The importance of taking into account the principle of microscopic reversibility in the analysis of complex copolymerization systems is demonstrated. The analysis of a reversible copolymerization system in which segmental exchange is possible from the point of view of the reaction microreversibility proves that hetero‐reshuffling rate constants depend on homo‐reshuffling rate constants and copolymerization thermodynamics.
We report the simple one‐pot synthesis of size tunable zinc oxide nanoparticles (ZnO NPs) out of an organometallic ZnO precursor using the self‐assembly of solution phase polystyrene‐block‐poly(2‐vinylpyridine) micelles. The resulting hybrid material could be deposited on various substrates in a straightforward manner with the NPs showing size‐dependent absorption and photoluminescence due to the quantum‐size effect. We compare the results to the assembly of preformed NPs which are selectively incorporated in the poly(2‐vinylpyridine) core of the micelles due to the high affinity of ZnO to vinylpyridine.
