The Synthesis of Magnetic Core‐Shell Nanoparticles by Surface‐Initiated Ring‐Opening Polymerization of ε‐Caprolactone

Summary: The synthesis of core‐shell particles with a poly(ε‐caprolactone) (PCL) shell and magnetite (Fe₃O₄) contents of between 10 wt.‐% and 41 wt.‐% proceeds by surface‐initiated ring‐opening polymerization of ε‐caprolactone to give surface‐immobilized oligomers with between 1 400 g · mol⁻¹ and 11 500 g · mol⁻¹. The particles are dispersable in good solvents for the PCL shell. Magnetization experiments on the resulting superparamagnetic ferrofluids give a core‐size distribution with an average diameter, d_v, of about 9.7 nm.

TEM image of Fe₃O₄/PCL core‐shell particles cast from CHCl₃ dispersion.     

Positioning lithium ions by host–guest chemistry combined with self‐assembly using a thiophene‐based all‐conjugated amphiphilic block copolymer

Self‐assembly of poly(3‐hexylthiophene) ( P3HT) driven by π–π stacking, combined with “Host‐Guest Chemistry” of ethylene glycol oligomer and lithium ion is demonstrated using a thiophene‐based all conjugated amphiphilic block copolymer, containing 93 mol % of P3HT and 7 mol % of poly(3‐(2‐(2‐{2‐[2‐(2‐methoxy‐ethoxy)‐ethoxy]‐ethoxy}‐ethyl))thiophene), P3EGT blocks. An ion chelating ability of ethylene glycol oligomers with lithium ions in the P3EGT block is confirmed using ¹H‐NMR spectrometry. This method could allow positioning lithium ions at the interface between P3HT domains and PC₆₁BM clusters, confirmed using XRD and photoluminescence quenching experiments. The compact lamellar P3HT domains by side repulsion driven self‐assembly of amphiphilic block copolymer and the molecular engineering of the interface with an optimized lithium contents are resulted in the improvement of photovoltaic performance in an organic solar cell (2.1–3.0%). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1068–1074     

Electronic Structures and Spectroscopy of Luminescent para‐Phenylenevinylene Oligomers

The computational models for a series of PPV (para‐phenylenevinylene) oligomers were formed based on the biphenyl and stilbene structures. These oligomers were optimized using DFT at B3LYP/6‐31G (d) level. On the basis of the optimized geometries, the electronic spectra and ¹³C NMR spectra were calculated by the INDO/CIS and B3LYP/6‐31G(d) methods, respectively. It indicates that the main absorptions in the electronic spectra are red‐shifted when the oligomer length is increased. The main absorptions in the electronic spectra and the ¹³C chemical shifts are altered obviously when the substituents on the matrix are changed.     

Aminated PCL‐based copolymers by chemical modification of poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone)

A novel method is proposed to access to new poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) using poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone) as polymeric substrate. First, ring‐opening (co)polymerizations of α‐iodo‐ε‐caprolactone (αIεCL) with ε‐caprolactone (εCL) are performed using tin 2‐ethylhexanoate (Sn(Oct)₂) as catalyst. (Co)polymers are fully characterized by ¹H NMR, ¹³C NMR, FTIR, SEC, DSC, and TGA. Then, these iodinated polyesters are used as polymeric substrates to access to poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) by two different strategies. The first one is the reaction of poly(αIεCL‐co‐εCL) with ammonia, the second one is the reduction of poly(αN₃εCL‐co‐εCL) by hydrogenolysis. This poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) (F_αNH2εCL < 0.1) opens the way to new cationic and water‐soluble PCL‐based degradable polyesters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6104–6115, 2009     

Synthesis of a new 2‐amino‐glycan,poly‐(1→6)‐α‐D‐mannosamine,by ring‐opening polymerization of 1,6‐anhydro‐mannosamine derivatives

A stereoregular 2‐amino‐glycan composed of a mannosamine residue was prepared by ring‐opening polymerization of anhydro sugars. Two different monomers, 1,6‐anhydro‐2‐azido‐mannose derivative ( 3 ) and 1,6‐anhydro‐2‐(N, N‐dibenzylamino)‐mannose derivative ( 6 ), were synthesized and polymerized. Although 3 gave merely oligomers, 6 was promptly polymerized into high polymers of the number‐average molecular weight (M_n) of 2.3 × 10⁴ to 2.9 × 10⁴ with 1,6‐α stereoregularity. The differences of polymerizability of 3 and 6 from those of the corresponding glucose homologs were discussed. It was found that an N‐benzyl group is exceedingly suitable for protecting an amino group in the polymerization of anhydro sugars of a mannosamine type. The simultaneous removal of O‐ and N‐benzyl groups of the resulting polymers was achieved by using sodium in liquid ammonia to produce the first 2‐amino‐glycan, poly‐(1→6)‐α‐D ‐mannosamine, having high molecular weight through ring‐opening polymerization of anhydro sugars.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of four‐arm star poly(L‐lactide) oligomers using an in situ‐generated calcium‐based initiator

Using an in situ‐generated calcium‐based initiating species derived from pentaerythritol, the bulk synthesis of well‐defined four‐arm star poly(L ‐lactide) oligomers has been studied in detail. The substitution of the traditional initiator, stannous octoate with calcium hydride allowed the synthesis of oligomers that had both low PDIs and a comparable number of polymeric arms (3.7–3.9) to oligomers of similar molecular weight. Investigations into the degree of control observed during the course of the polymerization found that the insolubility of pentaerythritol in molten L ‐lactide resulted in an uncontrolled polymerization only when the feed mole ratio of L ‐lactide to pentaerythritol was 13. At feed ratios of 40 and greater, a pseudoliving polymerization was observed. As part of this study, in situ FT‐Raman spectroscopy was demonstrated to be a suitable method to monitor the kinetics of the ring‐opening polymerization of lactide. The advantages of using this technique rather than FTIR‐ATR and ¹H NMR for monitoring L ‐lactide consumption during polymerization are discussed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4736–4748, 2009     

Identification of autoxidation oligomers of flavan‐3‐ols in model solutions by HPLC‐MS/MS

Autoxidation of flavan‐3‐ols was carried out in aqueous/methanol model solutions under mildly acidic conditions (pH 6.0), and these autoxidation products were analyzed by using high performance liquid chromatography (HPLC) coupled with tandem mass spectrometry (MS/MS). The results showed that (+)‐catechins and (?)‐epicatechins generated autoxidation reaction with each other to form a series of oligomers that had the same [M ? H]^? molecular ions (MS¹) as those of natural procyanidins, but had completely different fragment ions (MS²). According to MS/MS analysis, the major fragments of these oligomers were derived not only from the retro‐Diels–Alder (RDA) dissociations on the C‐rings of the flavan‐3‐ol units, but also from the quinone‐methide (QM) cleavage of the interflavan linkages (IFL), and thus they were identified as B‐type dehydrodicatechins, B‐type dehydrotricatechins and A‐type dehydrotricatechins, respectively. The potential structures of their [M ? H]^? molecular ions and partial fragment ions were deduced on the basis of the MS/MS characterization and the oxidation of flavan‐3‐ols in previous reports. Some specific fragment ions were found to be very useful for identifying the autoxidation oligomers (the B‐type dehydrodicatechins at m/z 393, the B‐type dehydrotricatechins at m/z 681 and the A‐type dehydrotricatechins at m/z 725). Copyright © 2008 John Wiley & Sons, Ltd.     

Morphology of poly(p‐oxybenzoyl) prepared in perfluoropolyether

Solvent effect on the morphology of poly(p‐oxybenzoyl) (POB) prepared by the reaction‐induced phase separation of oligomers was examined by the polymerization of p‐acetoxybenzoic acid in perfluoropolyether Aflunox^TM (AFL2507 and AFL606). Polymerization was carried out at 320°C for 6 hr. POB microspheres were formed in AFL2507 by the liquid–liquid phase separation of oligomers due to the low miscibility of oligomers in AFL2507. The molecular weight of the solvent influenced the morphology, and the polymerization in AFL606 of which the molecular weight was lower than AFL2507 yielded whiskers formed by crystallization of oligomers induced by the increase in miscibility compared with that in AFL2507. The solvent structure and its molecular weight influenced the miscibility of oligomers and ultimately controlled the morphology from whisker to microsphere. Copyright © 2004 John Wiley & Sons, Ltd.     

Organocatalyzed ring‐opening polymerization of cyclic butylene terephthalate oligomers

In this study, various organic compounds, with different activation modes, have been tested as catalysts for the ring‐opening polymerization (ROP) of cyclic butylene terephthalate oligomers (CBT) in bulk at 210 °C, using tert‐butylbenzyl alcohol (tBnOH) as initiator. Among them, 1,3,5‐triazabicyclo[4.4.0]dec‐5‐ene (TBD) appeared to be the most efficient, achieving high monomer conversions in short reaction times (within minutes). Analysis by size‐exclusion chromatography (SEC) of the poly(butylene terephthalate) (PBT) synthesized using this catalyst also showed that the polymerization follows the expected theoretical M _n trend for molecular weights up to 50 kg·mol^?1. Chain‐end fidelity relatively to the alcohol initiator has been confirmed by MALDI‐TOF mass spectroscopy, which showed that all polymer chains possess the tert‐butylbenzyl moiety as chain‐end. Finally, to demonstrate the potential of this system for the synthesis of PBT‐based block copolymers, a monomethyl ether poly(ethylene glycol) (PEG) of 5000 g·mol^?1 has been employed as initiator for the ROP of CBT. A PEO‐b‐PBT block copolymer of 15,000 g·mol^?1 could thus been obtained, as confirmed by the shift of the SEC traces towards higher molecular weights and the same diffusion coefficient determined for ¹H NMR signals of the PEO block and the PBT block. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1611–1619     

Excited‐state energy dynamics of conjugated polycarbogermane oligomers: Introduction effects of germanium atom into π‐conjugated molecular system

Excited‐state energy dynamics of the conjugated polycarbogermane oligomers, poly{[1,4‐bis(thiophenyl)buta‐1,3‐diyne]‐alt‐(dimethylgermane)} (PBTBD‐DMG; n = 33), poly{[1,4‐bis‐(thiophenyl)buta‐1,3‐diyne]‐alt‐(diphethylgermane)} (PBTBD‐DPG; n = 12), poly{[1,4‐bis(phenyl)buta‐1,3‐diyne]‐alt‐(dimethylgermane)} (PBPBD‐DMG; n = 36), and poly{[1,4‐bis(phenyl)buta‐1,3‐diyne]‐alt‐(diphenylgermane)} (PBPBD‐DPG; n = 2), were investigated by steady‐state and picosecond time‐resolved fluorescence spectroscopies in liquid solution. The introduction effect of a germanium atom into π‐conjugated oligomer backbones and the substitution effect of a methyl or phenyl group on the germanium atom are discussed from solvent polarity‐dependent studies. Steady‐state and time‐resolved fluorescence studies on the thiophene‐containing polycarbogermane (PBTBD‐DMG and PBTBD‐DPG) oligomers revealed considerable solvent polarity‐dependent characteristics, whereas those of the phenylene‐containing polycarbogermane (PBPBD‐DMG and PBPBD‐DPG) oligomers do not significantly show such characteristics. As the solvent polarity increased from n‐hexane to tetrahydrofuran, the steady‐state fluorescence spectra of PBTBD‐DMG and PBTBD‐DPG oligomers were significantly redshifted, and their fluorescence lifetimes seemed to change from ～624 to ～46 ps. These results suggest that the excited‐state dynamics of PBTBD‐DMG and PBTBD‐DPG oligomers are related to an intramolecular charge transfer (ICT) emission process through (d‐p) π conjugation between the π‐conjugated system and unoccupied 4d orbitals of the germanium atom. These results are supported by quantum chemical (AM1 and CNDO/2) calculations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1298–1306, 2002     

Methacrylic acid and methyl methacrylate oligomers adsorbed to porous isotactic poly(methyl methacrylate) ultrathin films and mechanistic studies of living template polymerization

Methacrylic acid (MAA), methyl methacrylate (MMA), methacrylamide, and oligomers of MAA and MMA were selected as a model of active radical species in living template polymerization using stereocomplex formation. The adsorption behaviors of the aforementioned model compounds were examined toward porous isotactic‐(it‐) poly(methyl methacrylate) (PMMA) ultrathin films on a quartz crystal microbalance, which was prepared by the extracting of syndiotactic‐(st‐) poly(methacrylic acid) (PMAA) from it‐PMMA/st‐PMAA stereocomplexes. The apparent predominant adsorption of oligomers to monomers was observed in both PMAA and PMMA oligomers, suggesting that the mechanism of template polymerization follows the pick up mechanism. Although vinyl monomers were not incorporated into the porous it‐PMMA ultrathin film, both PMMA and PMAA oligomers were adsorbed at the initial stages. However, adsorbed amounts were limited to about 5 and 15% at 0.1 mol L^?1, respectively, which are much smaller values than corresponding st‐polymers. The results imply that radical coupling reaction is prevented during template polymerization to support the resulting living polymerization. ATR‐IR spectral patterns of oligomer complexes and it‐PMMA slightly changed in both cases, suggesting complex formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5879–5886, 2008     

Poly(propylene glycol)‐based ammonium ionenes as segmented ion‐containing block copolymers

The synthesis and characterization of series of segmented poly(propylene glycol) (PPG)‐based ammonium ionenes is described. Bromine end‐capped oligomers were successfully synthesized using the reaction of 6‐bromohexanoyl chloride with 1000, 2000, and 4000 g/mol PPGs. ¹H NMR spectroscopy, titration studies, and matrix‐assisted laser desorption ionization‐time of flight (MALDI‐TOF) mass spectrometry revealed the difunctionality of the oligomers. First, a series of PPG‐based ammonium ionenes was synthesized from bromine end‐capped PPG oligomers and N,N,N′,N′‐tetramethyl‐1,6‐hexanediamine. For this series, a single glass transition temperature (T_g) of approximately ?66 °C was observed through differential scanning calorimetry (DSC); dynamic mechanical analysis (DMA) showed the onset of flow ranged from 20 to 80 °C. In addition, a series of PPG‐based ammonium ionenes containing 1,12‐dibromododecane was synthesized to increase the aliphatic hard segment (HS) content and enhance the mechanical properties of the resulting materials. For these, two T_g's were observed using DMA; DMA also showed the onset of flow of ionenes containing higher HS content (33 wt %) occurred in the range of 100–140 °C. Tensile analysis for these ionenes demonstrated an average tensile strength at break ranging from 0.2 to 2.4 MPa. Small angle X‐ray scattering (SAXS) profiles for these ionenes showed that Bragg distances increase linearly with the molecular weight of PPG soft segment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4159–4167, 2010     

Synthesis and healing properties of poly(arylene ether sulfone)‐poly(alkyl disulfide) multiblock copolymers

A multiblock copolymer consisting of hard (poly(arylene ether sulfone)) and soft (poly(alkyl disulfide)) segments was successfully synthesized by oxidative coupling of the corresponding thiol‐terminated oligomers. Its structure was confirmed by ¹H and ¹³C NMR spectroscopy. The GPC data (M_w = 82,000, M_w/M_n = 2.7) and inherent viscosity (0.67 dL g⁻¹) indicated the formation of a high‐molecular‐weight multiblock copolymer, while AFM and DSC indicated a microphase‐separated morphology. Tensile testing of the multiblock copolymer films showed a large elongation at break, which is characteristic of microphase‐separated hard/soft multiblock copolymers. Over 90% of the elongation at break of damaged samples (notched or cut) was recovered by UV irradiation. The elongation recovery was proportional to the UV irradiation energy, and the high recovery was achieved by relatively weak irradiation (<170 J cm⁻²). The high content of disulfide bonds in the multiblock copolymer resulted in a lower self‐healing energy. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1358–1365     

Syntheses of donor acceptor biobased photocurable water‐soluble resins based on poly‐l‐lysine

We report a new kind of coating using UV waterborne technique with a biobased poly(amino acid) resin. Firstly we performed the thermal polycondensation of l ‐lysine during 15 h at 150 °C to synthesize water‐soluble oligomers of poly‐l ‐lysine (PLL) with 5–6 monomer units. These oligomers were then transformed in mild conditions to give photocurable water‐soluble resins. We grafted on the poly‐l ‐lysine backbone, allyl and maleamic acid functional groups, with a grafting rate close to 65% thanks to allyl glycidyl ether and maleic anhydride respectively. The influence of the reaction time and the reagents ratio on the grafting rate was investigated. Hence, the donor/acceptor photopolymerization of the mixture of allyl ether‐poly‐l ‐lysine (PLL‐g‐AE) with maleamic acid‐poly‐l ‐lysine (PLL‐g‐MA) in aqueous solution gave yellow transparent films. The degree of conversion and other kinetic parameters have been studied and detailed. This work contributes to the development of materials based on renewable resources and cleaner processes. It opens a new pathway to both fundamental and applied‐driven research. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 955–963     

Well‐defined polyoxazoline‐based alkoxyamines as efficient macroinitiators in nitroxide‐mediated radical polymerization of styrene

The synthesis of two well‐defined 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐nitroxide‐terminated poly(2‐methyl‐2‐oxazoline) with narrow dispersity (M_w/M_n = 1.1) has been achieved for the first time. The insertion of the alkoxyamine end groups at one or both ends of poly(2‐methyl‐2‐oxazoline) (PMEOX) chains has been successfully done using a method based on “terminating reagent method.” These macroinitiators have molecular weights ranging from 6.3 × 10³ to 9.4 × 10³ g mol^?1. In contrast, attempt to introduce the alkoxyamine group at one end of PMEOX chain through the “initiator method” has furnished a mixture of alkoxyamine‐graft polyoxazolines because of rearrangement of alkoxyamine occurring during the synthesis of PMEOX. The macroinitiators obtained by terminating reagent method have been used successfully for polymerization of styrene by nitroxide‐mediated radical polymerization (NMP), which exhibited all the expected features of a controlled system. The control of NMP has been proved by a good agreement between theoretical and experimental molecular weights and by narrow dispersity (M_w/M_n < 1.2). Different types of well‐defined multiblock copolymers have been prepared: diblock copolymers poly[(2‐methyl‐2‐oxazoline)‐b‐(styrene)] (PMEOX‐b‐PS) and, for the first time, triblock copolymers poly[(styrene)‐b‐(2‐methyl‐2‐oxazoline)‐b‐(styrene)] (PS‐b‐PMEOX‐b‐PS). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

A new insight into the mechanism of 1,3‐dienes cationic polymerization. II. Structure of poly(1,3‐pentadiene) synthesized with tBuCl/TiCl4 initiating system

The microstructure of poly(1,3‐pentadiene) synthesized by cationic polymerization of 1,3‐pentadiene with ^tBuCl/TiCl₄ initiating system is analyzed using one‐dimensional‐ and two‐dimensional‐NMR spectroscopy. It is shown that unsaturated part of chain contains only homo and mixed dyads with trans?1,4‐, trans?1,2‐, and cis?1,2‐structures with regular and inverse (head‐to‐head or tail‐to‐tail) enchainment, whereas cis?1,4‐ and 3,4‐units are totally absent. The new quantitative method for the calculation of content of different structural units in poly(1,3‐pentadiene)s based on the comparison of methyl region of ¹³C NMR spectra of original and hydrogenated polymer is proposed. The signals of tert‐butyl head and chloromethyl end groups are identified in a structure of poly(1,3‐pentadiene) chain and the new approaches for the quantitative calculation of number‐average functionality at the α‐ and ω‐end are proposed. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3297–3307     

Synthesis and ring‐opening polymerization of macrocyclic aryl ketone oligomers

A series of macrocyclic aryl ketone oligomers were prepared by the reaction of phthaloyl dichloride or isophthaloyl dichloride with various bridge‐linking electron‐rich aromatic hydrocarbons 3a–d under pseudo‐high dilution conditions in the presence of Lewis base via Friedel–Crafts acylation reaction. Detailed structural characterization of these oligomers confirmed the cyclic nature by a combination of MALDI‐TOF‐MS, GPC, and ¹H NMR analyses. These cyclic ketone oligomers have high solubility in organic solvents and the cyclic oligomers derived from phthaloyl dichloride are amorphous. The cyclic ketone oligomers readily undergo anionic ring‐opening polymerization in the melt by using potassium 4,4′‐biphenoxide as the initiator, producing linear, high molecular weight poly(ether ketone)s. Moreover, the isothermal chemorheology of the ring‐opening polymerization of cyclic oligomers 4a and 4b was also investigated. The results show that the shear viscosity of the molten reactive mixture is lower than 10 Pa · S at a constant shear rate of 0.05 rad/sec and increases slowly in the initial stage of ring‐opening polymerization. Copyright © 2009 John Wiley & Sons, Ltd.     

Syntheses and antitumor activities of polymers containing amino acid and 5‐fluorouracil moieties

The new monomer, 3,6‐endo‐methylene‐1,2,3,6‐tetrahydrophthalimidoethanoyl‐5‐fluorouracil (ETEFU), was synthesized from 5‐fluorouracil (5‐FU) and 3,6‐endo‐methylene‐1,2,3,6‐tetrahydophthalimidoethanoyl chloride (ETEC). Its homopolymer and copolymers with acrylic acid (AA) and vinyl acetate (VAc) were prepared by photopolymerization reactions using 2,2‐dimethoxy‐2‐phenylacetophenone (DMP) as the photoinitiator. The synthesized ETEFU and polymers were identified by FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectra. The contents of ETEFU units in poly(ETEFU‐co‐AA) and poly(ETEFU‐co‐VAc) were 20 and 17 mol%, respectively. The number‐average molecular weights of the synthesized polymers determined by gel permeation chromatography (GPC) were 4,600 to 10,700 g mol⁻¹. In vitro cytotoxicities of samples were evaluated with cancer cell lines [mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937)] and a normal cell line [mouse liver cells (AC2F)]. Cytotoxicities of 5‐FU and synthesized samples against the cancer cell lines were ranked as follows: ETEFU > poly(ETEFU) > 5‐FU > poly(ETEFU‐co‐AA) > poly(ETEFU‐co‐VAc). The in vivo antitumor activities of poly(ETEFU) and poly(ETEFU‐co‐AA) against Balb/C mice bearing the sarcoma 180 tumor cells were greater than those of 5‐FU at all doses except for the activity of poly(ETEFU) at 0.8 mg/kg. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1589–1595, 1999     

Synthesis,structural analysis,and visualization of poly(2‐ethynyl‐9‐substituted carbazole)s and poly(3‐ethynyl‐9‐substituted carbazole)s containing chiral and achiral minidendritic substituents

The synthesis of 2‐ethynyl‐9‐substituted carbazole and 3‐ethynyl‐9‐substituted carbazole monomers containing first‐generation chiral and achiral dendritic (i.e., minidendritic) substituents, 2‐ethynyl‐9‐[3,4,5‐tris(dodecan‐1‐yloxy)benzyl]carbazole (2ECz), 3‐ethynyl‐9‐[3,4,5‐tris(dodecan‐1‐yloxy)benzyl]carbazole (3ECz), 2‐ethynyl‐9‐{3,4,5‐tris[(S)‐2‐methylbutan‐1‐yloxy]benzyl}carbazole (2ECz*), and 3‐ethynyl‐9‐{3,4,5‐tris[(S)‐2‐methylbutan‐1‐yloxy]benzyl}carbazole (3ECz*), is presented. All monomers were polymerized and copolymerized by stereospecific polymerization to produce cis‐transoidal soluble stereoisomers. A structural analysis of poly(2ECz), poly(2ECz*), poly(3ECz), poly(3ECz*), poly(2ECz*‐co‐2ECz), and poly(3ECz*‐co‐3ECz) by a combination of techniques, including ¹H NMR, ultraviolet–visible, and circular dichroism spectroscopy, thermal optical polarized microscopy, and X‐ray diffraction experiments, demonstrated that these polymers had a helical conformation that produced cylindrical macromolecules exhibiting chiral and achiral nematic phases. Individual chains of these cylindrical macromolecules were visualized by atomic force microscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3509–3533, 2002     

Characterization of synthetic and commercial trisiloxane surfactant materials

The organosilicone surfactant Silwet L‐77^® (L‐77), used as an agrochemical adjuvant, is a mixture comprised predominantly of [(CH₃)₃SiO]₂? (CH₃)Si? (CH₂)₃? (OCH₂CH₂)_n? OCH₃ oligomers (n = 3–16, average n ≈ 7.5). The commercially available L‐77 mixture was purified by reversed‐phase high‐performance liquid chromatography (HPLC) to obtain individual trisiloxane surfactant components. Pure oligomers (n = 3, 6 and 9) were also synthesized. Synthesis was achieved by hydrosilylation of monomeric ethoxylate monomethyl ether starting reagents. Pure hexa‐ and nona‐ethylene glycols were produced by condensation of smaller oligomers. Atmospheric‐pressure ionization mass spectrometry (MS) methods were used to characterize fully the commercial L‐77 product and synthesized or isolated components. The application of Fourier‐transform ion cyclotron resonance MS and online HPLC–electrospray ionization MS techniques to the analysis of this surfactant are described here. The application of these analytical techniques also enabled elucidation of the synthetic by‐products present in the commercial formulation. In addition, physico‐chemical properties specific to agrochemical uses, such as droplet spread areas on plant foliage and surface tension for the different oligomer solutions, are also reported. Copyright © 2004 John Wiley & Sons, Ltd.