Aza-Morita-Baylis-Hillman reactions of N-(benzylidene)polyfluoroanilines with methyl acrylate and acrylonitrile

Aza-Morita-Baylis-Hillman reactions of N-(benzylidene)polyfluoroanilines 1 with methyl acrylate or acrylonitrile were studied. It was found that Lewis base, solvent and reaction temperature can significantly affect the reaction. Using 3-hydroxyquinuclidine (3-HQD) as a Lewis base in the reactions of 1 with methyl acrylate in DMF, the normal aza-Morita-Baylis-Hillman adducts 3 were formed in moderate to excellent yields. For the reactions of 1 with acrylonitrile, 1,4-diazabicyclo[2.2.2]octane (DABCO) is the best Lewis base giving the corresponding aza-Morita-Baylis-Hillman adducts 4 as the sole product in good to moderate yield. However, upon treatment of 1 with acrolein 2c, the corresponding reaction did not occur even in the presence of a variety of catalysts.     

Tandem three-component reactions of aldehyde, alkyl acrylate, and dialkylmalonate catalyzed by ethyl diphenylphosphine

A new highly efficient three-component reaction of alkyl acrylate, aldehyde and dialkyl malonate using ethyl diphenylphosphine as organocatalyst has been described. Various highly functional compounds bearing hydroxyl groups and the ester functions can be easily prepared in moderate to good yields according to our one-step procedure. The reactions are believed to proceed via Morita-Baylis-Hillman reactions of alkyl acrylate and aldehydes, followed by the Michael addition reactions of dialkyl malonates. Our reactions indicated that the intermediate species formed in the phosphine-catalyzed MBH reaction are an effective organic base to catalyze the Michael addition reactions of dialkyl malonates to the preformed MBH adducts.     

Chiral phosphine Lewis base catalyzed asymmetric aza-Baylis-Hillman reaction of N-sulfonated imines with methyl vinyl ketone and phenyl acrylate

In the aza-Baylis-Hillman reaction of N-sulfonated imines with methyl vinyl ketone (MVK) promoted by chiral phosphine Lewis base: (R)-2'-diphenylphosphanyl-[1,1']binaphthalenyl-2-ol (10 mol%), the aza-Baylis-Hillman adducts 1 were obtained in good yields with high ee (70-94% ee) at -30 degrees C in THF. In CH2Cl2 upon heating at 40 degrees C, the aza-Baylis-Hillman reaction of N-sulfonated imines with phenyl acrylate gave the adducts 2 in high yields (60-97%) with moderate ee (52-77%).     

Catalytic, asymmetric aza-Baylis-Hillman reaction of N-sulfonated imines with activated olefins by quinidine-derived chiral amines

The chiral nitrogen Lewis base, tricyclic cinchona alkaloid derivative TQO, is an effective promoter in the catalytic, asymmetric aza‐Baylis–Hillman reaction of N‐sulfonated imines Ar? CH?NR′ 1 (R′ = Ts, Ms, Ns, SES) with various activated olefins such as methyl vinyl ketone (MVK), ethyl vinyl ketone (EVK), acrolein, methyl acrylate, phenyl acrylate, or α‐naphthyl acrylate to give the corresponding adducts in moderate to good yields with good to high ee (up to 99 %) at ?30 °C or 45 °C in various solvents, including DMF/MeCN (1:1, v/v). The first such reaction of 1 with the simplest Michael acceptor MVK and methyl acrylate has been achieved with excellent enantioselectivity. The adducts derived from MVK and EVK had the opposite absolute configuration to those from acrolein, methyl acrylate, phenyl acrylate, and α‐naphthyl acrylate. A plausible mechanism has been proposed on the basis of previous reports and the authors’ investigations. An effective bifunctional chiral nitrogen Lewis base–Brønsted acid system has been revealed in this type of aza‐Baylis–Hillman reaction.     

Chiral phosphine lewis bases catalyzed asymmetric aza-Baylis-Hillman reaction of N-sulfonated imines with activated olefins

In the aza-Baylis-Hillman reaction of N-sulfonated imines (N-arylmethylidene-4-methylbenzenesulfonamides and others) with methyl vinyl ketone, ethyl vinyl ketone, and acrolein, we found that, in the presence of a catalytic amount of chiral phosphine Lewis base such as (R)-2'-diphenylphosphanyl-[1,1']binaphthalenyl-2-ol LB1 (10 mol %) and molecular sieve 4A, the corresponding aza-Baylis-Hillman adducts could be obtained in good yields with good to high ee (70-95% ee) at low temperature (approximately -30 to -20 degrees C) or at room temperature in THF, respectively. In CH2Cl2 upon heating at 40 degrees C, the aza-Baylis-Hillman reaction of N-sulfonated imines with phenyl acrylate or naphthyl acrylate gave the adducts in good to high yields (60-97%) with moderate ee (52-77%). The mechanistic insight has been investigated by 31P and 1H NMR spectroscopic measurements. The key enolate intermediate, which has been stabilized by intramolecular hydrogen bonding, has been observed by 31P and 1H NMR spectroscopy. An effective bifunctional Lewis base and Bronsted acid phosphine Lewis base system has been disclosed in this catalytic, asymmetric aza-Baylis-Hillman reaction.     

Highly efficient Heck reactions of aryl bromides with n-butyl acrylate mediated by a palladium/phosphine-imidazolium salt system

[reaction: see text] A new phosphine-imidazolium salt, L.HBr (1, L = (1-ethylenediphenylphosphino-3-(mesityl))imidazol-2-ylidene), has been prepared. A combination of 0.5 mol % of Pd(dba)(2) and 0.5 mol % of L.HBr in the presence of 2 equiv of Cs(2)CO(3) as base has proven to be highly efficient in the Heck coupling reactions of aryl bromides (from electron-deficient to electron-rich aryl bromides) with n-butyl acrylate.     

Thiol‐isocyanate‐acrylate ternary networks by selective thiol‐click chemistry

Thiol‐isocyanate‐acrylate ternary networks were formed by the combination of thiol‐isocyanate coupling, thiol‐acrylate Michael addition, and acrylate homopolymerization. This hybrid polymerization reaction sequence was preferentially controlled by using phosphine catalyst systems in combination with photolysis. The reaction kinetics of the phosphine/acrylate thiol‐isocyanate coupling reactions were systematically investigated by evaluating model, small molecule reactions. The thiol‐isocyanate reaction was completed within 1 min while the thiol‐acrylate Michael addition reaction required ～10 min. Both thiol‐isocyanate coupling and thiol‐acrylate Michael addition reactions involving two‐step anionic processes were found to be both quantitative and efficient. However, the thiol‐isocyanate coupling reaction was much more rapid than the thiol‐acrylate Michael addition, promoting initial selectivity of the thiol‐isocyanate reaction in a medium containing thiol, isocyanate, and acrylate functional groups. Films were prepared from thiol‐isocyanate‐acrylate ternary mixtures using 2‐acryloyloxyethylisocyanate and di‐, tri‐, and tetra‐functional thiols. The sequential thiol‐isocyanate, thiol‐acrylate, and acrylate homopolymerization reactions were monitored by infrared spectroscopy during film formation, whereas thermal and mechanical properties of the films were evaluated as a function of the chemical composition following polymerization. The results indicate that the network structures and material properties are tunable over a wide range of properties (T_g ～ 14–100 °C, FWHM ～ 8–46 °C), while maintaining nearly quantitative reactions, simply by controlling the component compositions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3255–3264, 2010     

Efficient Baylis--Hillman reaction using stoichiometric base catalyst and an aqueous medium

A practical and efficient set of conditions were developed using stoichiometric base catalyst, 1,4-diazabicyclo[2,2,2]octane (DABCO), and an aqueous medium to overcome problems commonly associated with the Baylis--Hillman reaction, such as low reaction yields and long reaction time. These simple modifications to the classical conditions, using more base catalyst and an aqueous medium, proved to be successful in converting a variety of aliphatic and aromatic aldehydes to their corresponding Baylis--Hillman products. The inclusion of environmentally friendly water in the reaction solvent was critical for achieving the high yield of Baylis--Hillman adducts. Our deuterium-exchange experiments suggest that the Michael addition adduct formed between DABCO and methyl acrylate is the active intermediate for the Baylis--Hillman reaction in aqueous conditions, and its hydrolysis, a nonproductive side reaction facilitated by the quaternary ammonium ion, leading to the formation of a stable betaine product, consumes both the catalyst and methyl acrylate, making it necessary to add more base catalyst and methyl acrylate.     

Precision synthesis of acrylate multiblock copolymers from consecutive microreactor RAFT polymerizations

Well‐defined acrylate RAFT polymers and multiblock‐copolymers have been synthesized via the use of a continuous‐flow microreactor, in which polymerizations could be executed in 5?20 min reaction time. First, Poly(n‐butyl acrylate) (PnBuA) was synthesized in the micro‐flowreactor by using two different trithiocarbonate RAFT agents. Reaction time and reaction temperature were optimized and collected samples were directly studied with NMR, SEC and ESI‐MS to determine conversion, molar mass and end group fidelity. Using the continuous flow technique, highly reproducible and fast polymerizations yielded quantitatively functionalized PnBuA in a very facile and efficient manner. One batch of RAFT acrylate polymer with a molar mass of 1100 g mol^?1 and excellent end group fidelity was employed as a macro‐RAFT agent for the subsequent copolymerization with different acrylate monomers (2‐ethylhexyl acrylate, t‐butyl acrylate, n‐butyl acrylate). Using this procedure, a sequential multiblock‐copolymer (M_n = 31,200 g mol^?1, PDI = 1.46) consisting of five consecutive acrylate blocks was synthesized. This study clearly demonstrates the potential of using a continuous‐flow microreactor for subsequent RAFT polymerizations towards well‐defined multiblock‐copolymers. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013, 51, 2366–2374     

Development of bifunctional salen catalysts: rapid,chemoselective alkylations of alpha-ketoesters

Lewis acid-Lewis base salen complexes have been identified as highly efficient catalysts for the addition of dialkylzincs to alpha-ketoesters. In contrast to aldehydes or ketones, the reaction between diethylzinc and alpha-ketoesters is significant in the absence of catalyst. In the presence of catalyst, the reaction rate is increased over 100-fold relative to the background. Furthermore, the reduction product, which is a major coproduct with other catalysts, is not observed with these bifunctional salens. As a result, high yields of the addition products can be obtained (57-99%). Both the Lewis acid and Lewis base portions of the catalyst are critical to the reactivity and selectivity. The two separate portions of the catalyst have been shown to function in a cooperative manner.     

DABCO-catalyzed multi-component domino reactions for green and efficient synthesis of novel 3-oxo-3H-benzo[a]pyrano[2, 3-c] phenazine-1-carboxylate and 3-(5-hydroxybenzo[a]phenazin-6-yl) acrylate derivatives in water

An efficient, convenient and environmentally benign procedure for the synthesis of novel 3-oxo-3H-benzo[a]pyrano[2,3-c]phenazine-1-carboxylate and 3-(5-hydroxybenzo[a]phenazin-6-yl)acrylate derivatives has been developed by domino three-component condensation reaction between 2-hydroxynaphthalene-1,4-dione, benzene-1,2-diamines and acetylenic esters in the presence of a catalytic amount of DABCO as an expedient, eco-friendly and reusable base catalyst in water. This green process produces biologically and pharmacologically significant heterocycles in a one-pot single operation and offers considerable advantages such as:operational simplicity, short reaction time, high yields, reusability of catalyst, absence of any tedious workup or purification and avoids hazardous reagents/solvents.     

Styrene-methyl acrylate copolymers and acrylate homopolymers in solution

Molecular weight determinations by light scattering and osmometry and intrinsic viscosity measurements were made in various solvents on fractions of styrene–methyl acrylate copolymers with different compositions and on acrylate homopolymers prepared by free-radical reaction. Relations between intrinsic viscosity [η] and molecular weight M thus established are compared with those reported by other authors. 2-Methylcyclohexanol was found to be a theta solvent for the copolymers and both parent homopolymers, and isoamyl acetate was a theta solvent for poly(methyl acrylate). From theta point viscosity data obtained with these solvents, unperturbed chain dimensions were estimated. The results are compared with the unperturbed dimensions estimated from the [η]–M relations obtained in good solvents. On the basis of the experimental data it was found that the unperturbed dimension depends linearly on the copolymer composition, in contrast to the case of styrene–methyl methacrylate copolymers. Composition dependences of the theta temperature and of the parameter describing the long-range interactions between nonadjacent segments in polymer chains were investigated. The result implies that long-range interactions between monomeric units never disappear even when those between the same monomeric units vanish. The Huggins constant for copolymer is discussed in terms of the excluded volume variable.     

Organotin polymers—II.Copolymerization parameters for tributyltin methacrylate with methyl acrylate,ethyl acrylate,butyl acrylate and acrylonitrile

Copolymerizations of tributyltin methacrylate (M₁) with methyl acrylate, ethyl acrylate, n-butyl acrylate and acrylonitrile were carried out in solution at 70° using azobisisobutyronitrile as initiator. Copolymer compositions were determined by tin analysis; monomer reactivity ratios were calculated by Fineman-Ross and Kelen-Tüdös methods. The reactivities of acrylic esters decrease as the alkyl group becomes bulkier. Azeotropic copolymers could be formed from tributyltin methacrylate with butyl acrylate and with acrylonitrile. The structures of M₁ and its azeotropic copolymers have been investigated by infrared spectroscopy.     

Cs/ZSM-35 分子筛催化甲缩醛和乙酸甲酯发生一步法羟醛缩合反应

丙烯酸及其酯是重要的化工原料, 广泛应用于涂料、粘结剂、纤维等领域, 目前工业上常采用丙烯两段氧化法进行制备. 然而该方法以石油基原料丙烯为源头, 采用 V/Mo/Bi 等金属催化剂, 不符合可持续发展理念, 且存在环境污染及氧气下产物易过度氧化等问题. 因此, 如何高效、安全、大规模工业化制备丙烯酸及其酯是研究者追求的目标. 以乙酸甲酯(MAc) 和甲醛为原料, 通过羟醛缩合一步制备丙烯酸及其酯是一条完全不同于丙烯氧化法的合成路径, 原料均可由煤基甲醇得到, 符合我国"富煤、贫油、少气"的基本能源结构, 且该方法碳原子利用率为 100%, 副产物仅为水, 属于绿色环保合成路径.羟醛缩合是典型的碳链增长反应, 可在酸性催化剂、碱性催化剂、以及酸碱双功能催化剂存在下发生. 碱性催化剂一般为负载型碱金属氧化物, 例如以 SiO2为载体的负载型 Na, K, Cs 氧化物催化剂等, 但都存在活性组分流失的问题, 进而导致催化剂的失活, 难以实现工业化. 酸碱双功能催化剂是目前研究的热点, 由于具有酸催化剂的高选择性和碱催化剂的高活性, 其反应性能要远优于单一酸性催化剂和单一碱性催化剂, 广大研究者对此进行了深入广泛的研究, 目前基本处于实验室阶段. 相对而言, 目前酸性催化剂上通过羟醛缩合反应制备丙烯酸及其酯的研究工作较少, 特别是以固体酸为催化剂进行乙酸甲酯和甲醛气固相反应研究非常少见.我们以甲缩醛为甲醛源, 创新性地采用固体硅铝分子筛为酸性催化剂, 催化甲缩醛 (DMM) 和 MAc 发生羟醛缩合反应来制备丙烯酸. 硅铝分子筛具有较高的活性, 可高效地催化羟醛缩合反应, 且由于分子筛催化剂具有很好的再生性能, 即使催化剂寿命较短, 也可采用流化床或移动床等反应器进行工业化, 因此存在良好的工业化前景. 为了进一步深入研究酸性位和碱性位各自对 DMM 和 MAc 羟醛缩合反应的影响, 本文以 HZSM-35 分子筛为载体, 采用浸渍法制备不同碱金属铯氧化物含量的催化剂, 利用氮气吸附/脱附方法和化学程序升温 (NH3-TPD) 方法对其孔结构和酸性质进行表征, 并进一步考察催化剂的性能. 结果表明, 微孔体积随着碱金属 Cs 负载量的增加而逐渐减小, 当 Cs 负载量增加至 10 wt% 时, 样品微孔体积从初始 0.105 cm3/g 降至 0.063 cm3/g. NH3-TPD 结果显示, 当 Cs 负载量为 1 wt%, 酸性催化剂载体上的强酸和弱酸活性位被大量碱性氧化物占据; 当负载量超过 5 wt% 时, 所有的酸性位均被覆盖. 随后考察负载不同碱金属含量分子筛的羟醛缩合反应性能, 发现碱金属氧化物的引入不利于羟醛缩合反应的进行, 这主要是由于作为甲醛源的 DMM 只有在酸中心上才能进行分解产生甲醛, 促使羟醛缩合反应顺利进行. 当采用 DMM 为甲醛源时, 体系中必须有酸性位存在. 同时得知, 分子筛 HZSM-35 中强酸和弱酸均是羟醛缩合反应的有效酸性位, 但强酸同时催化原料发生类甲醇制烯烃过程, 致使大量烃类副产物生成, 产生较重的积炭物种. 羟醛缩合反应在含有大量弱酸催化剂上 (如γ-Al2O3) 也可顺利进行, 且具有较高的活性和稳定性.     

Facile synthesis of alpha-substituted acrylate esters

Treatment of 5-monosubstituted Meldrum's acids with dimethylmethyleneimmonium iodide (Eschenmoser's iodide salt) in methanol gives alpha-substituted acrylate methyl esters in good yields. Easy access to 5-monosubstituted Meldrum's acids allowed us to synthesize a wide variety of alpha-substituted acrylate methyl esters. The reaction conditions are mild and tolerate many functional groups commonly used in organic synthesis; thus, this new method has potential as an alternative to conventional preparative methods for alpha-substituted acrylate esters.     

Tandem three-component reaction of aldehyde, alkyl acrylate, and amide using ethyl diphenylphosphine as organocatalyst

It is the first time that a chemoselective EtPPh₂-catalyzed three-component reaction of aromatic aldehyde, alkyl acrylate, and phthalimide or methyl toluenesulfonamide has been achieved. A variety of highly functional adducts can be generated efficiently in one step within 1-72 h in 38-93% yields. The reaction mechanism is proposed to undergo Morita-Baylis-Hillman reactions of aryl-substituted aldehydes and alkyl acrylates followed by Michael additions of amides. Our studies indicated that, in combination of EtPPh₂, alkyl acrylate also catalyzed this process.     

Preparation of PEG-modified urethane acrylate emulsion and its emulsion polymerization

In order to improve stability and reduce droplet size, the PEG-modified urethane acrylates were synthesized by the reaction of polyethylene glycol (PEG) with residual isocyanate groups of urethane acrylate to incorporate hydrophilic groups into the molecular ends. The droplet sizes of the PEG-modified urethane acrylate emulsions were much smaller than those of unmodified urethane acrylate emulsions at the same surfactant composition, and the droplet sizes of these emulsions were significantly effected not by surfactant compositions and types, but by the reaction molar ratio of PEG, because the urethane acrylate containing polyoxyethylene groups as terminal groups aided the interfacial activity of surfactant molecules and acted as a polymeric surfactant. The actions of PEG-modified urethane acrylate were confirmed by the investigation of adsorption of urethane acrylate in a water/benzene interface.For polymerization of emulsions, the stability of emulsion in the process of emulsion polymerization was changed by the type of surfactant or initiator. In the case of emulsion polymerization with a water soluble initiator (K₂S₂O₈), the emulsions prepared using TWEEN 60 were broken in the process of polymerization. However, polymerization of these emulsions could be carried out using an oil soluble initiator (AIBN). The conversion of emulsion polymerization changed with the type of urethane acrylates, that is, the reaction molar ratio of PEG to 2-HEMA.     

The effects of Lewis acid on the 1,3-dipolar cycloaddition reaction of C-arylaldonitrones with alkenes

The regio- and stereoselectivity of the 1,3-dipolar cycloaddition reactions of C-aryl-N-alkylaldonitrones (1a-e) with some alkenes were found to be affected significantly by the addition of Lewis acid. The rate of the reaction was also affected by adding the Lewis acid. In the reactions using allyl alcohol as a dipolarophile an addition of Lewis acid caused a remarkable acceleration of the reaction and a great change in the stereoselectivity. In the reactions using ethyl acrylate as a dipolarophile the regioselectivity was reversed whether the reaction was performed in the presence or the absence of Lewis acid; i.e. isoxazolidine-5-carboxylates were obtained mainly in the absence of Lewis acid although isoxazolidine-4-carboxylates were obtained mainly in the presence of Lewis acid. When the reaction of C,N-diarylaldonitrones (1k, 1m, 1n) with ethyl acrylate was carried out in the presence of Lewis acid, the cleavage of the N-O bond of the cycloadducts giving gamma-aminoalcohols was also observed besides a reverse phenomenon of regioselectivity.     

Optimization of lipase-catalyzed synthesis of sorbitan acrylate using response surface methodology

In this study, we have synthesized sorbitan acrylate through response surface methodology, using sorbitan and vinyl acrylate that catalyze immobilized lipase. In order to optimize the enzymatic synthesis of the sorbitan acrylate, we applied response surface techniques to determine the effects of five-level-four-factors and their reciprocal interactions with the biosynthesis of sorbitan acrylate. Our statistical model predicted that the highest conversion yield of sorbitan acrylate would be approx 100%, under the following optimized reaction conditions: a reaction temperature of 40.1 degrees C, a reaction time of 237.4 min, an enzyme concentration of 8%, and a 4.49:1 acyl donor/acceptor molar ratio. Using these optimal conditions in three independent replicates, the conversion yield reached 97.6+/-1.3%.     

Selective modification of polylactide by introducing acrylate groups: IR spectroscopy,gel permeation chromatography,and differential thermal analysis

One-stage modification of polylactide has been performed to obtain the acrylate derivatives of the polymer capable of further polymerization and preparation of cross-linked polymer materials suitable for creating implants. The reaction mechanism was determined by IR spectroscopy, gel permeation chromatography, and differential thermal analysis. It was shown for the first time that the reaction path changes depending on the ratio of components so that the desired product polylactide acrylate forms with a ~90% yield only in the presence of large (approximately tenfold) excesses of the isocyanate and acrylate components; at the equimolar ratio of components generally used in urethane formation, a mixture of the desired product (~30%), oligourethane diacrylates, and unchanged polylactide forms.