Kinetic resolution of racemic 2-(2-furyl)-2-hydroxyethyl acetate in the presence of PS lipase

Kinetic resolution of racemic 2-(2-furyl)-2-hydroxyethyl acetate by transesterification with vinyl acetate in the presence of Amano PS lipase, yielding (1R)-1-(2-furyl)ethane-1,2-diol diacetate with 98% ee and (2S)-2-(2-furyl)-2-hydroxyethyl acetate with >99% ee, is described.     

C2-Symmetric diphenylphosphoramide and diphenylthiophosphoramide derived from (1R,2R)-1,2-diaminocyclohexane as ligands for the titanium(IV) alkoxide-promoted addition of diethylzinc to aldehydes

Chiral C₂-symmetric diphenylphosphoramide 4 and diphenylthiophosphoramide 5 were prepared from the reaction of diphenylphosphinic chloride and diphenylthiophosphinic chloride with (1R,2R)-(−)-1,2-diaminocyclohexane in the presence of diisopropylethylamine in high yields. They were used as chiral ligands in the catalytic asymmetric addition reaction of diethylzinc to aldehydes in the presence of titanium(IV) isopropoxide to give the corresponding sec-alcohols in 70–83% ee with an (R)-configuration and in 40–50% ee with an (S)-configuration, respectively.     

Enantioselective synthesis of (−)-(1R,2R)-1,2-dihydrochrysene-1,2-diol

A general chiral building block containing the 1R,2R-trans-diol moiety was constructed utilizing the stereoselective Shi-epoxidation reaction on a tetralone scaffold assembled by a Negishi cross-coupling on N,N-diethylbenzamide. Further elaboration of this chiral building block into polycyclic aromatic compounds was demonstrated with the total synthesis of the precursor for the most carcinogenic metabolite of chrysene, (−)-(1R,2R)-1,2-dihydrochrysene-1,2-diol in 87% ee.     

Highly enantioselective Michael addition of isobutyraldehyde to nitroalkenes

The asymmetric catalytic Michael reaction between isobutyraldehyde and nitroalkanes with chiral primary amine thiourea organocatalysts was described. In the presence of 10 mol % of 1-((1R,2R)-2-amino-1,2-diphenylethyl)-3-benzylthiourea, the desired products were achieved in excellent enantioselectivity (up to>99% ee) with up to 98% yield.     

Enantiopure trans-1-amino-2-(arylsulfanyl)cyclohexanes: novel chiral motifs for ligands and organocatalysts

In order to obtain the title compounds (1R,2R)-cyclohexane-1,2-diol was stereoselectively converted into cis-(1R,2S)-2-(arylsulfanyl)cyclohexanols and these products were submitted to the nucleophilic substitution via the Mitsunobu reaction (HN₃, DEAD). Reduction of the isolated azides gave the desired trans-(1S,2S)-1-amino-2-(arylsulfanyl)cyclohexanes. The (1S,2S)-1-amino-2-(2-aminophenylsulfanyl)cyclohexanes thus prepared were reacted with 3,5-bis(trifluoromethyl)phenyl isothiocyanate to furnish the respective bis-thiourea compounds. An application of a derivative of this type as an organocatalyst (20 mol %) in the Baylis–Hillman reaction gave the respective product in up to 93% ee.     

Resolution of 7-oxabicyclo[2.2.1]hept-5-en-2-one via cyclic aminals

High yielding resolution of racemic 7-oxabicyclo[2.2.1]hept-5-en-2-one (±)-1 (`7-oxanorbornenone') via aminal formation with (R,R)-1,2-diphenylethylenediamine 2 is reported. Acidic hydrolysis furnishes the enantiomeric ketones (+)-1 and (−)-1 (≥95% ee). The chiral diamine is efficiently recovered.     

Synthesis of (+)-(1S,2R) and (−)-(1R,2S)-2-aminocyclobutane-1-carboxylic acids

(+)-(1S,2R) and (−)-(1R,2S)-2-aminocyclobutane-1-carboxylic acids have been prepared in >97% ee and in 33% and 20% overall yields starting from a single, chiral, bicyclic compound perceived as a chiral uracil equivalent. Construction of the cyclobutane ring is achieved via a [2+2] photocycloaddition reaction of this chiral precursor with ethylene.     

A chiral primary-tertiary-1,2-diamine as an efficient catalyst in asymmetric aldehyde–ketone or ketone–ketone aldol reactions

A novel chiral 1,2-diaminocyclohexane derivative, (1R,2R)-N¹-n-pentyl, N¹-benzyl-1,2-cyclohexanediamine, was designed, synthesized and applied as a catalyst in a number of aldol reactions between ketones and aryl aldehydes. Reactions between acetone and aryl aldehydes gave aldol products with moderate to good yields and with excellent enantioselectivity (up to yield 85%, ee 98%), while reactions between cyclohexanone and aryl aldehydes provided anti-β-hydroxyketone products with excellent yields, diastereoselectivity and with enantioselectivity (up to 82% yield, anti/syn ratio 99:1, ee 99%). The aldol reactions between acetone and isatins were investigated, which afforded excellent yields and enantioselectivity (up to 95% yield, 98% ee). The (R)- and (S)-isomers of convolutamydine A were obtained with 95% yield and 96% ee, and 95% yield and 94% ee, respectively.     

Asymmetric palladium-catalyzed annulation of benzene-1,2-diol and racemic secondary propargylic carbonates bearing two different substituents

The palladium-catalyzed cyclization of benzene-1,2-diol with various racemic secondary propargyl carbonates having no acetylenic hydrogen in the presence of (R)-Binap as the chiral ligand afforded the two regioisomers of the corresponding 2,3-dihydro-1,4-dioxin derivatives in quite good yields, and also in enantioselectivities going from 40 to 97%. The cyclization of benzene-1,2-diol with methyl (R)-1-methyl-3-phenylpro-2-yn-1-yl carbonate in the presence of dppb as the achiral ligand afforded 2-benzylidene-3-methyl-2,3-dihydro-1,4-benzodioxine as the major product with 15% ee. The use of (R)-Binap as the chiral ligand afforded the (+) cyclized compound in 45% ee, when the (−) enantiomer was obtained with 77% ee in the presence of (S)-Binap. All the results suggest that in this case the enantioselective step is the diastereoselective protonation of the palladium-carbene intermediates.     

Catalytic enantioselective conjugate addition of dialkyl zinc reagents to α,β-unsaturated ketones mediated by new phosphite ligands containing binaphthalene/1,2-diphenylethane moieties: a practical synthesis of (R)-(−)-muscone

New diastereoisomeric phosphites based on either (R)- or (S)-2,2′-dihydroxy-1,1′-binaphthyl (BINOL) and having the chiral alcoholic moiety derived from the monobenzyl ether of (R,R)-1,2-diphenylethane-1,2-diol have been prepared and used as chiral ligands in the enantioselective copper-catalyzed 1,4-addition of diethylzinc to chalcone and 2-cyclohexen-1-one (enantiomeric excesses up to 48%). With the (aR,R,R) ligand dimethylzinc adds enantioselectively to (E)-cyclopentadecen-2-en-1-one to give (R)-(−)-muscone (68% yield, 78% ee). This provides an efficient access to a valuable ingredient of the perfume industry. However, with the (aS,R,R) ligand, (S)-(+)-muscone is obtained with longer reaction times (37% yield and 10% ee) with a very high double diastereoselection effect being observed.     

Synthesis of (R)- and (S)-4-hydroxyisophorone by ruthenium-catalyzed asymmetric transfer hydrogenation of ketoisophorone

The first synthesis of (R)- and (S)-4-hydroxyisophorone by catalytic transfer hydrogenation of ketoisophorone is reported. Ruthenium catalysts containing commercially available chiral amino alcohols afforded 4-hydroxyisophorone in up to 97% selectivity and 97% ee. (R)- or (S)-4-Hydroxyisophorones with >99% ee were isolated by crystallization. The catalyst precursors [RuCl₂((S,R)-ADPE)(η⁶-p-cymene)] ((S,R)-ADPE=(1S,2R)-amino-1,2-diphenylethanol-N) and (R_Ru)-[RuCl((S,R)-ADPE⁻¹)(η⁶-p-cymene)] (ADPE⁻¹=amino-1,2-diphenylethanolato-N,O) were isolated for the first time and the X-ray crystal structure of the latter determined.     

Enantioselective Michael addition of aldehydes to maleimides organocatalysed by chiral 1,2-diamines: an experimental and theoretical study

Simple and commercially available chiral 1,2-diamines were used as organocatalysts for the enantioselective conjugate addition of aldehydes, including α,α-disubstituted, to maleimides. The reaction was carried out in the presence of hexanedioic acid as an additive in aqueous solvents at room temperature. By employing (1S,2S)- and (1R,2R)-cyclohexane-1,2-diamine as organocatalysts, the corresponding Michael adducts bearing new stereocenters were obtained in high or quantitative yields with enantioselectivities of up to 92%, whereas the use of (1S,2S)-1,2-diphenylethane-1,2-diamine gave a much lower ee. Theoretical calculations were used to justify the observed sense of the stereoinduction.     

Enantioselective addition of diethylzinc to aromatic aldehydes catalyzed by C2-symmetric chiral diols

Optically pure C₂-symmetric diols have been synthesized with moderate yields in a straightforward manner, and are used as catalysts in the enantioselective alkylation of aromatic aldehydes with diethylzinc. The addition of diethylzinc to benzaldehyde and sterically hindered 1-naphthaldehyde was achieved with excellent enantioselectivities (97–99% ee) under catalysis with (1R,2R)-1,2-bis(3,5-dibromophenyl)-ethane-1,2-diol and (1R,2R)-1,2-bis(3,5-diphenylphenyl)-ethane-1,2-diol.     

Novel and enantioselective syntheses of (R)- and (S)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid: a synthon for sitagliptin and its derivatives

A new synthetic strategy for (R)- and (S)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid, a building block in the preparation of sitagliptin and its derivatives, was developed. Pd(OAc)₂ catalyzed coupling of 2,4,5-trifluoro-1-iodobenzene with allyl alcohol gave 3-(2,4,5-trifluorophenyl)propanal in a yield of 95%. l-Proline catalyzed reaction of the 3-phenylpropanal (in only 1.2 molar equiv) with nitrosobenzene followed by reduction with NaBH₄ and Pd/C catalyzed hydrogenation gave (R)-3-(2,4,5-trifluorophenyl)propane-1,2-diol with >99% ee and 65% yield. Selective tosylation of primary hydroxyl group of the 1,2-propandiol unit followed by cyanide displacement afforded (R)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanenitrile (80%). The nitrile was converted to the title β-hydroxy acid under basic hydrolysis in a yield of 90%. Thus, (R)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid was prepared enantioselectively from the starting material in four steps and 45% overall yield. The reaction sequence was repeated with d-proline as the catalyst to give (S)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid in 45% overall yield and >99% enantiomeric excess.     

Asymmetric Direct Aldol Reactions Catalyzed by a Simple Chiral Primary Diamine–Br⊘nsted Acid Catalyst in/on Water

Abstract

The direct asymmetric aldol reaction catalyzed by the simple and commercially available chiral primary diamines, (1S,2S)-1,2-diphenylethane-1,2-diamine and (1R,2R)-1,2-diphenylethane-1,2-diamine, is presented. The catalyst system is a primary amine with Br?nsted acid–catalyzed direct aldol reaction of p-nitrobenzaldehyde and cyclohexanone with high chemo- and stereoselectivity on water, which furnishes the corresponding β-hydroxyketone with up to 94% ee.     

Asymmetric 1,4-addition of organoboronic acids to α,β-unsaturated ketones and 1,2-addition to aldehydes catalyzed by a palladium complex with a ferrocene-based phosphine ligand

A combination of palladium with ferrocene-based phosphine ligand with a carbon–bromine bond was found to be a good catalyst for the 1,4-addition of arylboronic acids to α,β-unsaturated ketones and the 1,2-addition to aldehydes. Using Pd(dba)₂ and (S,R_p)-[1-(2-bromoferrocenyl)ethyl]diphenylphosphine (S,R_p)-1, 3-phenylcyclohexanone was obtained from the reaction of 2-cyclohexen-1-one with phenylboronic acid in the presence of K₂CO₃ in toluene at room temperature after 3 h in 92% yield with 76% ee. In the 1,2-addition of 4-methylphenylboronic acid to benzaldehyde, 96% of (4-methylphenyl)phenylmethanol was afforded after 24 h, while the enantiomeric excess was only 6%.     

Enantioselectivity switch controlled by N,N′-di- or N,N,N′,N′-tetra-substituted chiral thiophosphorodiamide ligands,structural relatives of thioureas,in catalytic additions of diethylzinc to aldehydes

We have developed a series of new chiral thiophosphorodiamide ligands derived from (1R,2R)-(+)-1,2-diphenylethylenediamine, which are the structural relatives of thioureas. An investigation into their catalytic properties in asymmetric additions of diethylzinc to aldehydes has shown that N,N,N′,N′-tetra-substituted chiral thiophosphorodiamides can give (R)-secondary alcohols with up to 98% yield and 98% ee, while N,N′-di-substituted chiral thiophosphorodiamides give (S)-secondary alcohols with up to 99% yield and 97% ee values. The enantioselectivity switch is highly efficient with a broad substrate scope. We have also proposed hypothetical reaction pathways, which result in an enantioselectivity switch.     

Studies towards the synthesis of (1R,2S)- and (1S,2S)-1,2-epoxy-3-hydroxypropylphosphonates and (1S,2S)- and (1R,2S)-2,3-epoxy-1-hydroxypropylphosphonates

The trans-configured fosfomycin analogue, diethyl (1S,2S)-1,2-epoxy-3-hydroxypropylphosphonate, was synthesised by the intramolecular Williamson reaction of diethyl (1S,2R)-1,3-dihydroxy-2-mesyloxypropylphosphonate. The cis-analogue was obtained as O-ethyl or O,O-diethyl (1R,2S)-1,2-epoxy-3-hydroxypropylphosphonates, when (1R,2R)-1,3-dihydroxy-2-mesyloxypropylphosphonate or its 3-O-trityl derivative were used as starting materials, respectively. The intramolecular Williamson cyclisations of diethyl (1S,2R)- and (1R,2S)-1-benzyloxy-3-hydroxy-2-mesyloxypropylphosphonates led to diethyl (1S,2S)- and (1R,2S)-2,3-epoxy-1-benzyloxypropylphosphonates, respectively, with the concomitant formation of diethyl (E)-1-benzyloxy-3-hydroxyprop-1-en-1-phosphonate. From diethyl (1S,2S)- and (1R,2S)-2,3-epoxy-1-benzyloxypropylphosphonates, enantiomerically pure diethyl (1S,2S)- and (1R,2S)-1,2-dihydroxypropylphosphonates were obtained by catalytic hydrogenation, while diethyl (1S,2S)- and (1R,2S)-3-acetamido-1,2-dihydroxypropylphosphonates were produced after epoxide ring opening with dibenzylamine, acetylation and hydrogenolysis.     

A novel synthesis of (2S)-3-(2,4,5-trifluorophenyl)propane-1,2-diol by sharpless asymmetric epoxidation method

Synthesis of (2S)-3-(2,4,5-trifluorophenyl)propane-1,2-diol by the Sharpless asymmetric epoxidation reaction has been achieved. 2,4,5-Trifluorobenzaldehyde with methyl 2-(triphenyl-λ⁵-phosphanylidene)acetate gave methyl (E)-3-(2,4,5-trifluorophenyl)acrylate in 83% yield. The reduction of ester group with DibalH followed by Sharpless asymmetric epoxidation gave ((2R,3R)-3-(2,4,5-trifluorophenyl)oxiran-2-yl)methanol. Pd/C-catalyzed hydrogenation of epoxy alcohol furnished (2S)-3-(2,4,5-trifluorophenyl)propane-1,2-diol with >90% ee and 71% yield.     

Ti-mediated addition of diethylzinc to benzaldehyde. The effect of chiral additives

In the presence of a chiral tridentate bissulfonamide, the titanium-mediated addition of diethylzinc to benzaldehyde gave alkylated products ranging from the (R)-enantiomer, formed with an e.e. of 26%, to the (S)-enantiomer, formed in 72% e.e. The enantioselectivity was also affected by the presence of additional chiral mono- and bidentate ligands, with the reactions proceeding via complexes containing the chiral sulfonamide and the additive. The addition of (1R,2R)-1,2-diphenyl-1,2-ethanediamine and (1S,2S)-1,2-diphenyl-1,2-ethanediamine gave the (S)-product with e.e. of 49% and the (R)-product with 16% e.e., respectively, whereas without additives the (R)-product was obtained in 26% e.e. In the presence of (1R,2R)-1,2-diphenyl-1,2-ethanediamine only (i.e. without the chiral sulfonamide), the (S)-product formed with a 3% e.e.