Gravimetric,electrochemical, and morphological studies of an isoxazole derivative as corrosion inhibitor for mild steel in 1M HCl

In present study, an isoxazole derivative, namely, (Z)-4-(4-hydroxy-3-methoxybenzylidene)-3-methylisoxazol-5(4H)-one referred here as (IOD) has been studied as an environment-friendly corrosion inhibitor for mild steel (MS) in acidic medium (1 M HCl). The present work was investigated by gravimetric, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), fourier-transform infrared (FT-IR) spectroscopy techniques. Atomic force microscopy (AFM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) confirmed the surface morphologies of the MS surface with and without IOD in the acid medium. The inhibition efficiency (I.E.) of IOD was increased by rising its concentration attaining maximum value (96.6%) at 300 ppm at 30 °C and decreases with increasing temperature from 30 °C to 60 °C. The adsorption of studied inhibitor followed Langmuir adsorption isotherm model. The PDP study revealed that the IOD acts as a mixed-type inhibitor with predominating anodic effect. The EIS study confirmed that increasing IOD concentration enhances the charge transfer resistance (R_ct) and then reduces the double layer capacitance (C_dl) owing to the development of a protective layer on the MS surface.     

Corrosion inhibition of mild steel by highly stable polydentate schiff base derived from 1,3- propanediamine in aqueous acidic solution

Recently, the hydrolysis of Schiff bases under experimental conditions gives suspicion for their corrosion inhibition performance. The current study employs a stable Schiff base namely, 2,2′-{propane-1,3-diylbis[azanylylidene (E) methanylylidene]}bis(6-methoxyphenol) (LPD) as corrosion inhibitor for mild steel (MS) in 1 M HCl solution. The presence of the characteristic peak of the imine group in UV-visible spectra was taken as an indicator for LPD stability in acidic media. The inhibition action was examined using electrochemical techniques including potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) besides gravimetric measurement. The inhibition efficiency reached 95.93 % for 0.75 mM LPD after 24 h of immersion at 25 °C. This high efficiency is owing to the presence of the characteristic imine group and other heteroatoms and π- electrons of the aromatic benzene rings. The mechanism of inhibition depends on adsorption phenomena on mild steel surface which obeys Langmuir isotherm model. The calculated values of adsorption equilibrium constant (K_ads), adsorption free energy ΔG_ads, adsorption enthalpy ΔH_ads and adsorption entropy ΔS_ads indicated spontaneous exothermic adsorption process of both physical and chemical nature. By rising temperature, the inhibition efficiency of LPD was decreased. The calculated activation energy was increased as the concentration of LPD increased. LPD was considered as a mixed-type inhibitor as indicated from PDP measurements. The obtained surface morphology and composition analysis using SEM/EDS, AFM and FTIR techniques ensures the high efficiency of LPD as corrosion inhibitor.     

4-phenyl-decahydro-1H-1,5-benzodiazepin-2-one as novel and effective corrosion inhibitor for carbon steel in 1 M HCl solution: A combined experimental and empirical studies

The heterocyclic system, namely 4-phenyl-decahydro-1H-1,5-benzodiazepin-2-one (POBZ) was inspected as a corrosion inhibitor of carbon steel (CS) in a 1 M HCl medium through electrochemical impedance spectroscopy (EIS), potentiodynamic polarization measurements (PDP), and scanning electron microscopy (SEM). The experimental data indicate that the inhibiting action augments with augmenting POBZ amount and reduces with augmenting temperature. The inhibiting action efficiency of 90.98% is obtained with 0.001 M at 303 K. The potentiodynamic polarization (PDP) results mentioned that the POBZ is of mixed type. The adsorption of POBZ on the CS followed Langmuir isotherm. SEM exams affirmed that the steel surface is smooth in presence of POBZ. In light of the calculations of density functional theory (DFT) and molecular dynamics simulation, the mechanism of POBZ inhibitory activity was addressed.     

Ficus carica extract as environmentally friendly inhibitor for the corrosion of L-80 carbon steel in 0.5 ​M ​H2SO4 media

We reported here, the corrosion inhibition of carbon steel (CS) in H₂SO₄ media by Ficus carica leaves extract as green sustainable inhibitor. This study was investigated using mass loss method (ML), potentiodynamic polarization (PDP), electrochemical frequency modulation (EFM) and electrochemical impedance spectroscopy (EIS). As well as the metal surface morphology was analyzed by Atomic Force Microscopy (AFM). In addition, the chemical characterization of green inhibitor is carried out by Fourier Transform Infrared (FTIR). EIS revealed that the Ficus carica extract formed a thin protective film on the metal surface and by using of 300 ​ppm of extract of Ficus carica allow reaches (92.7%) of corrosion inhibition efficiency (CIE). The PDP curves revealed that the Ficus carica extract act as a mixed-type inhibitor. It was demonstrated that %IE enhanced with rising the Ficus carica extract doses also increased with arises in temperature (95.7%). Kinetic parameters and thermodynamic adsorption of the system have also been measured and studied. The data obtained revealed that the adsorption of Ficus carica on metal surface followed the Temkin isotherm and according to the activation energy (Ea1) the Ficus carica extract acts by chemisorption process. The results from unlike measurements were in a well accord.     

On the corrosion inhibition of iron in hydrochloric acid solutions,Part I: Electrochemical DC and AC studies

The inhibitive action of 4-methyl pyrazole (4MP) against the corrosion of iron (99.9999%) in solutions of hydrochloric acid has been studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). At inhibitor concentration range (10^?3–10^?2 M) in 1.0 M acid, the results showed that 4MP suppressed mainly the anodic processes of iron corrosion in 1.0 M HCl by adsorption on the iron surface according to Temkin adsorption isotherm. Both potentiodynamic and EIS measurements reveal that 4MP inhibits the iron corrosion in 1.0 M HCl and that the efficiency increases with increasing inhibitor concentration. Data obtained from EIS were analyzed to model the corrosion inhibition process through an equivalent circuit.     

Cupressus arizonica fruit essential oil: A novel green inhibitor for acid corrosion of carbon steel

Natural-based corrosion inhibitors have gained great research interest thanks to their low cost and higher performance. The Cupressus arizonica fruit essential oil (CAFEO) has a higher extraction yield than leaves; however, it has less antibacterial and antifungal activities. The three main components in the CAFEO were α-pinene (51.07%), myrcene (17.92%), and limonene (9.66%). Essential oils with a higher percentage of α-pinene were found to have outstanding corrosion inhibition properties. Therefore, herein, the CAFEO was investigated as a green corrosion inhibitor for carbon steel (CS) in 1.0 mol/L HCl using electrochemical, i.e., potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS), and scanning electron microscope (SEM) techniques. The experimental results revealed that CAFEO successfully inhibited the carbon steel corrosion in 1.0 mol/L HCl solution. Results from PDP indicated that the inhibitor had a mixed-type effect with a predominance cathodic character. EIS data showed that the charge transfer resistance of the CS electrode increased from 20.9 Ω cm² in blank solution to 294.5 Ω cm² in HCl solution inhibited with 0.5 g/L of CAFEO at 298 K, leading to a significant decrease in the double layer capacitance values and an inhibition efficiency (η%) of 93%. The high temperatures showed a negative effect on the corrosion inhibition efficiency of the tested inhibitor. At 323 K, the η% of CAFEO decreased to 77%. Besides, SEM images showed that the inhibitor formed a protective barrier against acid attack, preventing carbon steel from corrosion. Theoretical calculations by Density Functional Theory (DFT) were performed to investigate the reactivity of the three main components of CAFEO.     

Surface interaction and corrosion inhibition of carbon steel in sulfuric acid using Petroselinum crispum extract

With the aid of the mass loss (ML) method, and a few electrochemical techniques [potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS)], the inhibitory impact of Petroselinum crispum (PC) extract on C-steel corrosion in solutions of 1 M sulfuric acid was assessed. By employing Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) techniques, the C-steel surface morphology was investigated. The data showed that the solution of plant extract can be effectively utilized to inhibit C-steel corrosion in solutions of 1 M sulfuric acid. The effectiveness of the extract was enhanced by the higher extract dose and rising temperature. The apparent activation energy and the enthalpy of the dissolution process were determined and discussed. The presence of PC decreases the double-layer capacity from 493.1 to 107.3 μF cm⁻² and raises the charge transfer resistance in a solution of 1 M sulfuric acid from 43.39 to 287.7 Ω cm². PC is a mixed-type inhibitor, as demonstrated by PDP tests. The PC extract demonstrated the highest productivity for the C-steel protection up to 90.2% at 300 ppm from the extract, according with the PDP technique. The attained data indicated that PC extract was adsorbed chemically (ΔG^o_ads > 40 kJ mol⁻¹) onto the surface of the C-steel following the Temkin isotherm. The results of numerous tests appear to agree.     

Experimental and computational chemical studies on the corrosion inhibitive properties of metamizole sodium pharmaceutical drug compound for CS in hydrochloric acid solutions

The effect of sodium metamizole as a corrosion inhibitor for carbon steel (CS) in 1 M hydrochloric acid at various concentrations was studied by using chemical (weight loss, WL) and electrochemical [electrochemical frequency modulation (EFM), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP)] methods. The results of WL showed that the effectiveness of sodium metamizole as a CS preservative in a hydrochloric acid solution at room temperature raised by improvement of the concentration of the inhibitor and reached 82.87% at 300 ppm and 25 °C. The effect of temperature on the CS was studied and the thermodynamic parameters of activation and adsorption were computed and discussed. The results showed that the inhibition efficiency (IE) decreases with increasing temperature, suggestive of physisorption. This was collaborated by values of activation energy, which are all below 80 kJ mol^?1 and free energy which are below 20 kJ mol^?1. The adsorption mechanism was coherent with Langmuir adsorption model. Results of the PDP revealed that the inhibitor was adsorbed on CS surface by mixed type of behavior. Furthermore, EIS revealed the dip in the values of double-layer capacitance and improvement in the charge transfer resistance with increased dose of sodium metamizole. Surface examinations were performed using altered techniques. The theoretical studies were calculated to confirm the validity of the practical results and the results of both were compared with each other, demonstrating the validity of the results obtained.     

Ultrasound-assisted synthesis of substituted triazines and their corrosion inhibition behavior on N80 steel/acid interface

The three substituted triazines were synthesized by ultrasound irradiation method and characterized by FTIR, ¹³C NMR, and ¹H NMR. The corrosion inhibition behavior of the synthesized inhibitors on N80 steel in 15% HCl was studied using electrochemical analyses and weight loss methods. All three inhibitors exhibited excellent corrosion inhibition performance, and the best inhibition effect was shown by TZ-3 (93.2% at 800 mg/L). EIS measurements suggest that the corrosion inhibition process is a charge transfer controlled. The PDP results indicated that all the triazines are mixed-type inhibitors. Langmuir adsorption model is the best fit among the other tested isotherms. These molecules can act as promising acidizing corrosion inhibitors for the oil gas industry. FTIR, AFM, and UV-vis studies corroborate the adsorption of inhibitor molecules over the metal surface.     

Polyvinyl alcohol–sulphanilic acid water soluble composite as corrosion inhibitor for mild steel in hydrochloric acid medium

The inhibitive action of synthesised polyvinyl alcohol–sulphanilic acid (PVASA) composite on the corrosion of commercial mild steel in 1 M HCl medium has been investigated by weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopic (EIS) methods. Characterization of PVASA composite has been carried out using Fourier transform infrared spectroscopy (FTIR). Experimental results reveal that PVASA composite acts as an inhibitor in the acid environment. The inhibition efficiency increases with an increase in the concentration of the inhibitor. Maximum inhibition efficiency of PVASA composite was found to be 84% at 6000 ppm. Thermodynamic and kinetic parameters have been obtained from temperature studies. Electrochemical measurement reveals that PVASA composite acts as a mixed inhibitor and the adsorption follows Langmuir adsorption isotherm.     

Corrosion protection of carbon steel in acidic media by expired bupropion drug; experimental and theoretical study

The effects of expired bupropion on the corrosion protection of carbon steel in hydrochloric acid (1.0 M) and sulfuric acid (0.5 M) solutions were examined by Fourier transform infrared (FTIR) spectroscopy, Tafel polarization and electrochemical impedance spectroscopy (EIS). Bupropion concentrations in both acid solutions were raised, which improved corrosion prevention. Bupropion was a mixed inhibitor because it retarded the anodic and cathodic processes, as indicated by polarization data. The inhibition efficiency decreased with the increasing temperature from 25 to 55 °C. In the presence of bupropion, the activation energies of corrosion in both acid solutions increased. The thermodynamic quantities were deduced from the influence of temperature on the corrosion process of carbon steel in both acid media. Bupropion adsorption on carbon steel followed the Langmuir adsorption isotherm. The polarization data yielded outcomes consistent with the results arising from impedance measurements. FTIR spectroscopy showed the active sites of bupropion molecule during adsorption on the alloy surface. The theoretical study and molecular dynamics simulation of bupropion was done by a density functional theory (DFT) approach to realize the effects of molecular structure on the inhibitive action of bupropion.     

Experimental,DFT studies and molecular dynamic simulation on the corrosion inhibition of carbon steel in 1 M HCl by two newly synthesized 8-hydroxyquinoline derivatives

In the present work, two new 8-hydroxyquinoline derivatives namely, 5-(((2-hydroxybenzylidene)amino)methyl) 8-hydroxyquinoline [HBMQ] and 5-(((4-chlorobenzylidene)amino)methyl) 8-hydroxyquinoline [CBMQ] were synthesized and investigated as corrosion inhibitors against the dissolution of carbon steel (C38 steel) in 1 M HCl. These compounds were obtained with high yield, and their structures were characterized by nuclear magnetic resonance spectroscopy (NMR) and elemental analysis. Gravimetric, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), and surface morphology analyses utilizing scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) were used to quantify inhibitory performance. The adsorption process of inhibitory compounds was then demonstrated using quantum mechanics approaches such as Density Functional Theory (DFT) and Molecular Dynamic Simulation (MD). Based on EIS results, the investigated derivatives effectively inhibit the degradation of C38 steel over the entire concentration range with a maximum efficiency of 91.9% and 88.0% for [CBMQ] and [HBMQ], respectively, at 10^?3 M. In addition, the PDP studies revealed that [HBMQ] and [CBMQ] compounds acted according to a mixed-type mechanism. Moreover, the adsorption mechanism follows the Langmuir isotherm model. The quantum theoretical study by DFT and MD simulation confirmed the experimental results.     

Corrosion prevention of mild steel in acidic medium by 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid: Theoretical and experimental approach

The inhibition efficiency of 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid (PTCA) against mild steel (MS) corrosion was investigated in acidic solution by using quantum chemical calculations based on Density Functional Theory (DFT) method and electrochemical measurements. The electrochemical impedance spectroscopy (EIS), potentiodynamic, potential zero charge (pzc) analysis and electrochemical noise (EN) measurements at various concentrations (from 0.1 to 10 mM) and immersion times were utilized in experimental part. The surface analysis was achieved scanning electron microscope (SEM) and contact angle measurements in the absence and presence of 10 mM PTCA. According to DFT results, PTCA exhibited 3.737 eV band gap and 8.130 Debye dipole moment which were a signal of potentially convenient corrosion inhibitor properties. PTCA has a remarkable corrosion inhibition capability to mild steel, which inhibited both anodic and cathodic corrosion rates, relying on it's physically adsorption on the metal solution interface and protection ability was increased with increasing PTCA concentration. The obtained adsorption equilibrium constant was 11.11 × 10³ M^-1 and calculated standard free energy of adsorption was ?33.03 kJ mol^?1. The determined activation energy values were 55.58 kJ mol^?1 and 96.86 kJ mol^?1 in 0.5 M HCl in the absence and presence of 10 mM PTCA, respectively. PTCA demonstrated a strong inhibition efficiency of 98.3%, after 168 h immersion, according to the EIS results. As a consequently, we recommend that PTCA is a convenient inhibitor in 0.1 M HCl for mild steel protection against corrosion.     

Impedance spectroscopic study of corrosion inhibition of Al-Pure by organic Schiff base in hydrochloric acid

A new corrosion inhibitor namely o-Chloroaniline-N-benzylidene (o-CANB) has been synthesized and its inhibitive performance toward the corrosion of Al-Pure in 1.0 M hydrochloric acid has been investigated. Corrosion inhibition was studied by chemical method (weight loss) and electrochemical techniques including polarization method and electrochemical impedance spectroscopy (EIS). The present study has shown that this inhibitor is good in acidic media and the inhibition efficiency up to >99% in 1.0 M HCl. Polarization measurement revealed that the investigated inhibitor is a mixed type with a predominant action on cathode. Impedance measurement showed that the charge transfer resistance (R_ct) increased and double layer capacitance (C_dl) decreased with an increase in the inhibitor's concentration. Obtained results about inhibition efficiency from weight loss, polarization study and EIS are in good agreement with each other. The adsorption of the inhibitor on the metal surface in the acid solution was found to obey Langmuir's adsorption isotherm.     

Rosmarinus officinalis extract as eco-friendly corrosion inhibitor for copper in 1 M nitric acid solution: Experimental and theoretical studies

Rosmarinus officinalis extract (ROE) was studied chemically (mass loss, ML), electrochemically impedance spectrometry (EIS), and potentiodynamic polarization (PDP) as a corrosion inhibitor in 1 M nitric acid. According to ML, ROE is effective like a copper preservative in 1 M HNO₃ acid solution at R.T by improving inhibitor concentration up to 77 % at 300 ppm and 25 °C. A study was conducted regarding the effect of temperature on copper adsorption, as well as the calculation of adsorption coefficients. Results indicated that physisorption increases with temperature, indicating a decrease in inhibition efficiency (%IE). Langmuir's adsorption model was consistent with the adsorption mechanism. Using the PDP method, the inhibitor accumulated on the copper surface in mixed forms. Moreover, EIS revealed that the value of double-layer capacitance dropped with an increased dose of ROE, while the charge transfer resistance improved. A different approach was taken to the examination of surfaces. Both theoretical studies and practical results were calculated and compared to demonstrate that the results were valid.     

Electrochemical investigation of corrosion and corrosion inhibition of iron in hydrochloric acid solutions

The inhibition effect of 1-methyl pyrazole (MPA) on the acidic corrosion of iron in 1.0 M HCl was studied at different concentrations (10^?3–10^?2 M) by potentiodynamic polarization and electrochemical impedance spectroscopy, and EIS measurements. It is found from the polarization studies that methyl pyrazole (MPA) behaves mainly as anodic inhibitor in HCl. Values of polarization resistance (R_p) and double layer capacitance (C_dl) in the absence and presence of MPA in 1.0 M HCl are determined. The adsorption of MPA on iron surface from HCl is found to obey Temkin adsorption isotherm.     

Corrosion inhibition of carbon steel immersed in a 1 M HCl solution using benzothiazole derivatives

Corrosion inhibition effect of 2-mercaptobenzothiazole (MBT) and 2-aminobenzothiazole (ABT) compounds on ST-37 carbon steel in 1 M hydrochloric acid solution was investigated by electrochemical impedance spectroscopy (EIS), and it was observed that both of these compounds have corrosion inhibition effect on carbon steel. Evaluation of electrochemical behavior in test solutions showed that by increasing the immersion time from 15 to 300 min, corrosion resistance of samples is increased and at the same immersion time MBT has a better corrosion inhibition in comparison to ABT. AFM technique was performed for MBT and ABT. The results of calculations showed superior inhibition efficiency of MBT in comparison to ABT. This can cause easier protonation and consequently adsorption on the metal surface occurs.     

A combined computational & electrochemical exploration of the Ammi visnaga L. extract as a green corrosion inhibitor for carbon steel in HCl solution

Natural-based corrosion inhibitors have gained great research interest thanks to their low cost and higher performance. In this work, the chemical composition of the methanolic extract of Ammi visnaga umbels (AVU) was evaluated by gas chromatography (GC) coupled with mass spectrometry (MS) and applied for corrosion inhibition of carbon steel (CS) in 1.0 mol/L HCl using chemical and electrochemical techniques along with scanning electron microscope (SEM) and theoretical calculations. A total of 46 compounds were identified, representing 89.89% of the overall chemical composition of AVU extract, including Edulisin III (72.88%), Binapacryl (4.32%), Khellin (1.97%), and Visnagin (1.65%). Chemical (Weight loss) and electrochemical (potentiodynamic polarization curves (PPC), and electrochemical impedance spectroscopy (EIS)) techniques revealed that investigated extract can be used as an effective corrosion inhibitor for carbon steel in 1.0 mol/L HCl solution. At a low dose of 700 ppm, the inhibitory action of AVU extract reached an inhibition efficiency of 84 percent. According to polarization tests, the investigated extract worked as a mixed inhibitor, protecting cathodic and anodic corrosion reactions. The EIS test showed that upon the addition of AVU extract to HCl solution, the polarization resistance increased while the double layer decreased. SEM images showed a protected CS surface in the inhibited solution. Quantum chemical calculations by Density Functional Theory (DFT) for the main components confirmed the major role of heteroatoms and aromatic rings as adsorption sites. Molecular dynamics (MD) simulation was used to study the adsorption configuration of the main components on the Fe(1 1 0) surface. Outcomes from this study further confirmed the significant advantage of using plant-based corrosion inhibitors for protecting metals and alloys.     

Experimental and theoretical investigation of adsorption and inhibition properties of 2-Amino-1,3,5-triazine-4,6-dithiol against corrosion in hydrochloric acid solution on mild steel

In this work, 2-Amino-1,3,5-triazine-4,6-dithiol (2-ATD) as novel and high efficiency corrosion inhibitor has been investigated for mild steel (MS) corrosion in 0.5 M HCl solution using electrochemical methods, scanning electron microscopy (SEM), energy disperse X-ray spectroscopy (EDX), atomic force microscopy (AFM) and quantum chemical calculation methods. Potentiodynamic polarization (PDP) curves indicate that 2-ATD is mixed type inhibitor, corrosion inhibition efficiency increased with increasing inhibitor concentration and reached its value of 96.5%. Evolution of exposure time versus corrosion behavior of 2-ATD is examined in corrosive medium. While corrosion potential (E_corr) shifted more negative values, polarization resistances (R_p) decreased after 120 h exposure time due to the corrosion process. H₂ volume is measured in uninhibited and inhibited solutions (10 mM 2-ATD) after 120 h exposure time. Very low volume (3.6 mL cm⁻²) of H₂ is obtained on MS electrode in inhibited solution after 120 h of exposure, indicating that 2-ATD covers the entire surface against aggressive attack and retards the both anodic dissolution of MS and cathodic hydrogen evolution reactions. The adsorption process proposal is the Langmuir isotherm which is most suitable. Adsorption and thermodynamic parameters show that 2-ATD has a strong adsorption effect onto MS surface and includes mixed adsorption style (physical and chemical). Corrosion current density increases with increasing temperature and high activation energy (Ea) proves the strong adsorption of 2-ATD on the MS surface. Anti-corrosion mechanism of 2-ATD is described more detail with the potential of zero charge method. SEM, EDX and AFM analysis support the obtained results of electrochemical methods and confirm the existence of protective layer and strong adsorption of 2-ATD on the MS surface. Chronoamperometry test shows that current densities are almost constant whole experiment in the presence of organic film. Finally, quantum chemical calculation method of 2-ATD in blank solution is performed to investigate the active sites for possible attachment with MS surface.     

Corrosion inhibition of carbon steel in hydrochloric acid 0.5 M by hexa methylene diamine tetramethyl-phosphonic acid

The efficiency of hexa methylene diamine tetra methyl-phosphonic acid (HMDTMP), as corrosion inhibitor for carbon steel in 0.5 M HCl, has been determined by gravimetric and electrochemical measurements. Polarization curves indicate that the compound is a mixed inhibitor, affecting both cathodic and anodic corrosion currents. Adsorption of HMDTMP derivatives on the carbon steel surface is in agreement with the Langmuir adsorption isotherm model, and the calculated Gibbs free energy value confirms the chemical nature of the adsorption. EIS results show that the charge in the impedance parameters (R_t and C_dl) with concentrations of HMDTMP is indicative. The adsorption of this molecule leads to the formation of a protective layer on carbon steel surface. The electrochemical results have also been supplemented by surface morphological studies.