Photoinduced electron transfer in some photosensitive molecules-incorporated semiconductor/zeolites: New photocatalytic systems

An intramolecular charge transfer (ICT) molecule,p-N,N-dimethyl-aminobenzoic acid (DMABA) has been studied in zeolite and colloidal media. The ratio of ICT to normal emission (ICT/LE) is greatly enhanced in zeolites compared to that in polar solvents. The ICT emission of DMABA was quenched by increasing the concentration of TiO₂ colloids, while the normal emission was slightly enhanced. Upon illumination of the heteropoly acid (HPA) incorporated TiO₂ colloids, interfacial electron transfer takes place from the conduction band of TiO₂ to the incorporated HPA which is also excited to catalyze the photoreduction of Methyl Orange. It is found that the interfacial electron transfer mechanism of HPA/TiO₂ is quite analogous to the Z-scheme mechanism for plant photosynthetic systems. In DMABA-adsorbed TiO₂/Y-zeolite the ICT/LE ratio of DMABA is quite small implying that electron transfer takes place from DMABA to the conduction band of TiO₂. This results in drastic enhancement in the photocatalytic activity of DMABA-adsorbed TiO₂/Y-zeolite compared to free TiO₂/Y-zeolite.     

Photocatalytic reduction of azo dyes Naphthol Blue Black and Disperse Blue 79

Photocatalytic reduction of two textile azo dyes, Naphthol Blue Black (NBB) and Disperse Blue 79 (DB79) has been carried out in colloidal WO₃ and TiO₂ suspensions. Under bandgap excitation of the semiconductor colloids these dyes undergo irreversible reduction as they react with the trapped electrons. The quantum efficiency for the photocatalytic reduction of these dyes were 5.4% and 4.8% for NBB and DB79 respectively. The kinetics and mechanism of the interfacial charge transfer in these colloidal suspension has been elucidated with transient absorption spectroscopy. The reaction between the dye and trapped electrons is diffusion limited and occurs with rate constants of 1.1×10⁸ M⁻¹s⁻¹ and 4.0×10⁷ M⁻¹s⁻¹ for NBB and DB79 respectively.     

A New Mussel‐Inspired Polydopamine Sensitizer for Dye‐Sensitized Solar Cells: Controlled Synthesis and Charge Transfer

The efficient electron injection by direct dye‐to‐TiO₂ charge transfer and strong adhesion of mussel‐inspired synthetic polydopamine (PDA) dyes with TiO₂ electrode is demonstrated. Spontaneous self‐polymerization of dopamine using dip‐coating (DC) and cyclic voltammetry (CV) in basic buffer solution were applied to TiO₂ layers under a nitrogen atmosphere, which offers a facile and reliable synthetic pathway to make the PDA dyes, PDA‐DC and PDA‐CV, with conformal surface and perform an efficient dye‐to‐TiO₂ charge transfer. Both synthetic methods led to excellent photovoltaic results and the PDA‐DC dye exhibited larger current density and efficiency values than those in the PDA‐CV dye. Under simulated AM 1.5 G solar light (100 mW cm^?2), a PDA‐DC dye exhibited a short circuit current density of 5.50 mW cm^?2, corresponding to an overall power conversion efficiency of 1.2 %, which is almost 10 times that of the dopamine dye‐sensitized solar cell. The PDA dyes showed strong adhesion with the nanocrystalline TiO₂ electrodes and the interface engineering of a dye‐adsorbed TiO₂ surface through the control of the coating methods, reaction times and solution concentration maximized the overall conversion efficiency, resulting in a remarkably high efficiency.     

SrTiO3/TiO2 Hybridstructure as Photoanode in Dye‐Sensitized Solar Cell

In dye‐sensitized solar cells (DSSCs), the charge recombination at the TiO₂/dye/electrolyte interface greatly influences the photoelectron conversion efficiency. Hybrid semiconductor materials with matched band potentials are designed to reduce the charge recombination. In this study, SrTiO₃/TiO₂ hybridstructure was synthesized by using TiO₂ nanoparticles as template in a hydrothermal, showing a negative shift in the flat band potential. The DSSC with the SrTiO₃/TiO₂ anode exhibits an increased photovoltage and a reduced photocurrent. The suppression of charge recombination at the TiO₂/dye/electrolyte interface was observed in the electrochemical impedance spectroscopy, causing an improvement in the photovoltage. However, the SrTiO₃/TiO₂ system shows an obstructed electrons injection from the dye to SrTiO₃/TiO₂, limiting the photocurrent performance. The photoelectrochemical properties of the SrTiO₃/TiO₂ system are discussed in detail herein.     

Synthesis and Study of Plasmon‐Induced Carrier Behavior at Ag/TiO2 Nanowires

Nanocomposites of Ag/TiO₂ nanowires with enhanced photoelectrochemical performance have been prepared by a facile solvothermal synthesis of TiO₂ nanowires and subsequent photoreduction of Ag⁺ ions to Ag nanoparticles (AgNPs) on the TiO₂ nanowires. The as‐prepared nanocomposites exhibited significantly improved cathodic photocurrent responses under visible‐light illumination, which is attributed to the local electric field enhancement of plasmon resonance effect near the TiO₂ surface rather than by the direct transfer of charge between the two materials. The visible‐light‐driven photocatalytic performance of these nanocomposites in the degradation of methylene blue dye was also studied, and the observed improvement in photocatalytic activity is associated with the extended light absorption range and efficient charge separation due to surface plasmon resonance effect of AgNPs.     

Enhancement mechanism of SERS from cyanine dyes adsorbed on Ag2O colloids

Surface enhancement mechanism of Raman scattering from molecules adsorbed on silver oxide colloids is reported. Absorption spectra and Raman spectra of the cyanine dye D266 and pyridine molecules adsorbed on Ag₂O colloids, and the influences of S₂O₃²⁻ and OH⁻ on the SERS are studied respectively. The results indicate that ‘chemical' enhancement is dominant in Ag₂O colloidal solution. Surface complexes of adsorbed molecules and small silver ion clusters Ag_n⁺ as the SERS active sites make an important contribution to surface enhanced Raman scattering (SERS). At these active sites, charge transfer between the adsorbed molecules and the small silver ion clusters is the main enhancement origin. The enhancement factor of D266 adsorbed on Ag₂O colloids is theoretically estimated with the excited-state charge transfer model, which is roughly in accordance with the experiments.     

Crystal structure and spectroscopic properties of ammonium hydrogensquarate squaric acid monohydrate

The structure of ammonium hydrogensquarate squaric acid monohydrate has been determined by single crystal X-ray diffraction. The compound crystallizes in the monoclinic space group C2/c and exhibits a 3D network with molecules linked by intermolecular interactions with participation of the H₂Sq, HSq^?, NH₄ ⁺, and H₂O species. The HSq^? anion and the neutral H₂Sq form a strong head-to-tail dimer through O–H···O hydrogen bonding with lengths of 2.587 and 2.494 Å (protected space between numeral and unit). The layers are connected by ammonium cations and water molecules in a plane through the O···N (2.950, 2.978, 3.036 Å) and O···O (2.953, 2.781 Å) bonds. Another such layer is connected to the NH₄ ⁺ cation in the adjacent plane through bifurcated N–H···O hydrogen-bonding to form a double layer (NH···O bond lengths are 3.036, 2.978, 2.857, 2.909, 2.958, and 2.742 Å, respectively). The IR-band assignment of the compound was achieved using the polarized IR-spectroscopy of oriented colloids in a nematic host. Theoretical ab initio calculations were performed and achieved with a view to explain the IR-bands of the H₂Sq.HSq^? motif.     

Photophysics of a Ruthenium 4H‐Imidazole Panchromatic Dye in Interaction with Titanium Dioxide

The photophysics of bis(4,4′‐di‐tert‐butyl‐2,2′‐bipyridine‐κ²N,N′)[2‐(4‐carboxyphenyl)‐4,5‐bis(p‐tolylimino‐κN)imidazolato]ruthenium(II) hexafluorophosphate is investigated, both in solution and attached to a nanocrystalline TiO₂ film. The studied substitution pattern of the 4H‐imidazole ligand is observed to block a photoinduced structural reorganization pathway within the 4H‐imidazole ligand that has been previously investigated. Protonation at the 4H‐imidazole ring decreases the excited‐state lifetime in solution. When the unprotonated dye is anchored to TiO₂, photoinduced electron injection occurs from thermally nonrelaxed triplet metal‐to‐ligand charge transfer (³MLCT) states with a characteristic time constant of 0.5 ps and an injection efficiency of roughly 25 %. Electron injection from the subsequently populated thermalized ³MLCT state of the dye does not take place. The energy of this state seems to be lower than the conduction band edge of TiO₂.     

Photochemical properties of photosystem 1 immobilized in a mesoporous semiconductor matrix

The pigment-protein complex of photosystem 1 (PS1) isolated from cyanobacterium Synechocystis sp. PCC 6803 has been adsorbed on a solid mesoporous film made from TiO₂ nanoparticles. was on The TiO₂ film supported on a glass substrate with a surface area of 1 cm² adsorbs up to 0.045 nmol of PS1. PS1 molecules are distributed in the pores of the mesoporous support. Immobilization has an insignificant effect on the optical and photochemical properties of PS1. A reversible photoinduced EPR signal from the oxidized primary electron donor P700 of immobilized PS1 has been detected. It has been shown by photoelectrochemical methods that the photoexcitation of PS1 results in electron injection from PS1 to the conduction band of TiO₂.     

Photocurrent Enhancement of Dye‐Sensitized Solar Cells owing to Increased Dye‐Adsorption onto Silicon‐Nanoparticle‐Coated Titanium‐Dioxide Films

The inverse‐micellar preparation of Si nanoparticles (Nps) was improved by utilizing sodium naphthalide. The Si Nps were subsequently functionalized with 4‐vinylbenzoic acid for their attachment onto TiO₂ films of dye‐sensitized solar cells (DSSCs). The average diameter of the COOH‐functionalized Si (Si? COOH) Nps was 4.6(±1.7) nm. Depth profiling by secondary‐ion mass spectrometry revealed that the Si Nps were uniformly attached onto the TiO₂ films. The number of Ru^II dye molecules adsorbed onto a TiO₂ film that was treated with the Si? COOH Nps was 42 % higher than that on the untreated TiO₂ film. As a result, DSSCs that incorporated the Si? COOH Nps exhibited higher short‐circuit photocurrent density and an overall energy‐conversion efficiency than the untreated DSSCs by 22 % and 27 %, respectively. This enhanced performance, mostly owing to the intramolecular charge‐transfer to TiO₂ from the dye molecules that were anchored to the Si? COOH Nps, was confirmed by comparing the performance with two different Ru^II–bipyridine dyes (N719 and N749).     

Extensive enhancement in power conversion efficiency of dye-sensitized solar cell by using Al-doped TiO<Subscript>2</Subscript> photoanode

In this work, we have prepared Al-doped TiO₂ nanoparticles via a hydrothermal method and used it for making photoanode in dye-sensitized solar cell (DSSC). Material characterizations were done using XRD, AFM, SEM, TEM and EDAX. XPS results reveal that Al is introduced successfully into the structure of TiO₂ creating new impurity energy levels in the forbidden gap. This resulted in tuning of the conduction band of TiO₂ and reduced charge recombination which led to better current conversion efficiency of DSSC. Greater dye loading and enhanced surface area was obtained for Al-doped TiO₂ compared to un-doped TiO₂. I-V analysis, EIS and Bode plots are employed to evaluate photovoltaic performance. The short-circuit current density (J _sc) and efficiency (η) of cell employing Al-doped TiO₂ photoanode were extensively enhanced compared to the cell using un-doped TiO₂. The optical band gap (E _g) for Al-doped and un-doped TiO₂ was obtained as 2.8 and 3.2 eV, respectively. J _sc and η were 13.39 mAcm^?2 and 4.27%, respectively, under illumination of 100 mWcm^?2 light intensity when thin films of 1% Al-doped TiO₂ was employed as photoanode in DSSC using N719 as the sensitizer dye. With the use of un-doped TiO₂ as photoanode under similar conditions, J _sc 5.12 mAcm^?2 and η 1.06% only could be obtained. The maximum IPCE% obtained with Al-doped TiO₂ and un-doped TiO₂ was 67 and 38% respectively at the characteristic wavelength of dye (λ _max = 540 nm). The EIS analyses revealed resistive and capacitive elements that provided an insight into various interfacial processes in terms of the charge transport. It was observed that Al-doping reduced the interfacial resistance leading to better charge transport which has improved both photocurrent density and conversion efficiency. Higher electron mobility and fast diffusion resulting in greater charge collection efficiency was obtained for Al-doped TiO₂ compared to the un-doped TiO₂. Using the Mott–Schottky plot, the donor density was calculated for un-doped and Al-doped TiO₂. The work demonstrated that the Al-doped TiO₂ is potential photoanode material for low-cost and high-efficiency DSSC.     

BiVO4‐TiO2 Composite Photocatalysts for Dye Degradation Formed Using the SILAR Method

Composite photocatalyst films have been fabricated by depositing BiVO₄ upon TiO₂ via a sequential ionic layer adsorption reaction (SILAR) method. The photocatalytic materials were investigated by XRD, TEM, UV/Vis diffuse reflectance, inductively coupled plasma optical emission spectrometry (ICP‐OES), XPS, photoluminescence and Mott–Schottky analyses. SILAR processing was found to deposit monoclinic‐scheelite BiVO₄ nanoparticles onto the surface, giving successive improvements in the films′ visible light harvesting. Electrochemical and valence band XPS studies revealed that the prepared heterojunctions have a type II band structure, with the BiVO₄ conduction band and valence band lying cathodically shifted from those of TiO₂. The photocatalytic activity of the films was measured by the decolourisation of the dye rhodamine 6G using λ>400 nm visible light. It was found that five SILAR cycles was optimal, with a pseudo‐first‐order rate constant of 0.004 min^?1. As a reference material, the same SILAR modification has been made to an inactive wide‐band‐gap ZrO₂ film, where the mismatch of conduction and valence band energies disallows charge separation. The photocatalytic activity of the BiVO₄–ZrO₂ system was found to be significantly reduced, highlighting the importance of charge separation across the interface. The mechanism of action of the photocatalysts has also been investigated, in particular the effect of self‐sensitisation by the model organic dye and the ability of the dye to inject electrons into the photocatalyst′s conduction band.     

Treatment of TiO2 with COOH‐Functionalized Germanium Nanoparticles to Enhance the Photocurrent of Dye‐Sensitized Solar Cells

A dye‐sensitized solar cell (DSSC) containing a TiO₂ film treated with COOH‐functionalized germanium nanoparticles (Ge COOH Nps) exhibited a higher short‐circuit photocurrent density (J_sc; 15.4 mA cm⁻²) compared to the corresponding untreated DSSC (13.4 mA cm⁻²) using N719 and a 12 μm thick TiO₂ film at 100 mW cm⁻². The amount of N719 attached to the treated TiO₂ film was 21 % greater than that attached to the untreated TiO₂ film. Enhancement of the J_sc value by 15 % was attributed mostly to an intramolecular charge transfer from N719 attached to the Ge COOH Nps to the TiO₂ conduction band through the Ge COOH Nps.     

Au/TiO<Subscript>2</Subscript>/Graphene Composite with Enhanced Photocatalytic Activity Under Both UV and Visible Light Irradiation

Au/TiO₂/graphene composite was synthesized by the combination of electrostatic attraction and photo-reduction method. In the composite, graphene sheets act as an adsorption site for dye molecules to provide a high concentration of dye near to the TiO₂ and Au nanoparticles (NPs), and work as an excellent electron transporter to separate photoinduced e ^?/h ⁺ pairs. Under UV irradiation, photogenerated electrons of TiO₂ are transferred effectively to Au NPs and graphene sheets, respectively, retarding the recombination of electron–hole pairs. Under visible light irradiation, the Au NPs are photo-excited due to the surface plasmon resonance effect, and charge separation is accomplished by the interfacial electron injection from the Au NPs to the conduction band of TiO₂ and then transfer further to graphene sheets. As a result, compared with pure TiO₂, Au/TiO₂/graphene composite exhibited much higher photocatalytic activity for degradation of methylene blue under both UV and visible light irradiation, based on the synergistic effect of Au, graphene in contact with TiO₂, allowing response to the visible light, effective separation of photoinduced charges, and better adsorption of the dye molecules.     

Accelerating photocatalytic hydrogen evolution and pollutant degradation by coupling organic co-catalysts with TiO2

Accelerating the separation efficiency of photoexcited electron-hole pairs with the help of highly active co-catalysts has proven to be a promising approach for improving photocatalytic activity. Thus far, the most developed co-catalysts for semiconductor-based photocatalysis are inorganic materials; the employment of a specific organic molecule as a co-catalyst for photocatalytic hydrogen evolution and pollutant photodegradation is rare and still remains a challenging task. Herein, we report on the use of an organic molecule, oxamide (OA), as a novel co-catalyst to enhance electron-hole separation, photocatalytic H₂ evolution, and dye degradation over TiO₂ nanosheets. OA-modified TiO₂ samples were prepared by a wet chemical route and demonstrated improved light absorption in the visible-light region and more efficient charge transport. The photocatalytic performance of H₂ evolution from water splitting and rhodamine B (RhB) degradation for an optimal OA-modified TiO₂ photocatalyst reached 2.37 mmol g^-1 h^-1 and 1.43 × 10^?2 min^?1, respectively, which were 2.4 and 3.8 times higher than those of pristine TiO₂, respectively. A possible mechanism is proposed, in which the specific π-conjugated structure of OA is suggested to play a key role in the enhancement of the charge transfer and catalytic capability of TiO₂. This work may provide advanced insight into the development of a variety of metal-free organic molecules as functional co-catalysts for improved solar-to-fuel conversion and environmental remediation.     

D-A-D-based Unsymmetrical Thiosquaraine Dye for the Dye-Sensitized Solar Cells†

In dye-sensitized solar cell, modulating the electronic properties of the sensitizer by varying the donor, π-spacer, acceptor and anchoring groups help optimizing the structure of the dye for better device performance. Here, a donor–acceptor–donor-based unsymmetrical thiosquaraine sensitizer ( SQ5S ) has been designed and synthesized. Photophysical, electrochemical, theoretical and photovoltaic characterizations of SQ5S dye have been compared with its oxygen analog, SQ5 . The incorporation of the sulfur atom in the acceptor unit of SQ5S dye showed an intense peak at 688 nm, which was 38 nm of red-shifted and showed the panchromatic light harvesting response with the onset of 850 nm compared with SQ5 dye. The LUMO and HOMO energy levels are well aligned with the conduction band of TiO₂ and the redox potential of electrolyte for the charge injection and the dye-regeneration processes, respectively. Photovoltaic efficiency of 1.51% (V_OC 610 mV, J_SC 3.07 mA cm⁻², ff 81%) has been achieved for SQ5S dye, whereas SQ5 showed the device performance of 5.43% (V_OC 723 mV, J_SC 9.3 mA cm⁻², ff 80%). The decreased device performance for the dye SQ5S has been attributed to the favorable intersystem crossing process associated with the photoexcited SQ5S that reduces the driving force for the charge injection process.     

Photo Catalytic Degradation of Azo Dyes over Mn2+ Doped TiO2 Catalyst under UV/Solar Light:An Insight to the Route of Electron Transfer in the Mixed Phase of Anatase and Rutile

Mn²⁺ ion was doped into the TiO₂ matrix and its photocatalytic activity was evaluated for the degradation of a mono azo dye methyl orange (MO) and a di‐azo dye brilliant yellow (BY) under UV/solar light. X‐ray diffraction results revealed the phase transformation from anatase to rutile due to the inclusion of Mn²⁺ ion into the TiO₂ matrix. All the doped catalysts showed a red shift in the band gap to the visible region. The degradation reaction of the dyes was found to be dependent on its structure. It was found that mono azo dye degrades faster than di azo dye under UV/solar light. The rate constant under identical conditions calculated for the degradation of MO is 2.4 times (under UV light) and 4.5 times (under solar light) higher compared to BY. Among the photocatalysts studied, Mn²⁺(0.06 at.%)‐TiO₂ showed higher activity under both UV and solar light illumination. The synergestic effect in the bicrystalline framework of anatase and rutile effectively suppresses the charge carrier recombination and enhances the photocatalytic activity. The degradation reaction was followed by UV‐visible spectroscopy and the photoproducts formed were analyzed by GC‐MS techniques.     

Catalysis of redox reactions by Ag@TiO<Subscript>2</Subscript> and Fe<Superscript>3+</Superscript>-doped Ag@TiO<Subscript>2</Subscript> core–shell type nanoparticles

Ag nanoparticles encapsulated by TiO₂ shells have the ability to catalyze redox reactions on their surface. By continually monitoring by use of UV–visible spectroscopy it was found that the surface charge of both TiO₂-coated and uncoated colloidal silver particles changed after chemical electron injection. The charging and discharging process of Ag@TiO₂ vary, depending on the different Ag content of the core–shell nanoparticles. In order to enhance the stability of Ag@TiO₂ colloids, Fe³⁺ was doped into the lattice of the TiO₂ shells. The experimental results showed that the Fe³⁺ ions have the capacity to store and transfer electrons. Furthermore, the charging and discharging rate can be controlled by changing the thickness of the TiO₂ shells, because they are limited by the diffusion distance of electrons through the TiO₂ shells.     

Hierarchical TiO2 nanosheet‐assembled nanotubes with dual electron sink functional sites for efficient photocatalytic degradation of rhodamine B

A novel Pt–TiO₂/Ag nanotube photocatalyst has been synthesized successfully via a facile method. TiO₂ nanotubes are assembled with numerous ultrathin TiO₂ nanosheets and show a highly open structure. The gaps between adjacent TiO₂ nanosheets can serve as channels for the access of reactants, accelerating the mass transfer process. During the fabrication process of the Pt–TiO₂/Ag nanotube photocatalyst, high‐quality Pt–SiO₂ nanotubes are synthesized first with the structure‐directing effect of polyvinylpyrrolidone. Then a TiO₂ layer is coated on the outside surface of the silica nanotubes. The introduced titanium species can be converted into TiO₂ nanosheet structure during the subsequent hydrothermal treatment, gradually constructing nanosheet‐assembled nanotubes. Lastly, after the introduction of another electron sink function site of Ag through UV irradiation, the Pt–TiO₂/Ag nanotube photocatalyst with dual electron sink functional sites is obtained. The specially doped Pt and Ag NPs can simultaneously inhibit the recombination process of photogenerated charge carriers and increase light utilization efficiency. Therefore, the as‐synthesized Pt–TiO₂/Ag nanotube catalyst exhibits a high photocatalytic degradation performance for rhodamine B of 0.2 min^?1, which is about 3.2 and 5.3 times as high as that of Pt–TiO₂ and TiO₂ nanotubes because of the enhanced charge carrier separation efficiency. Furthermore, in the unique nanoarchitecture, the nanotubes are assembled with numerous ultrathin TiO₂ nanosheets, which can absorb abundant active species and dye molecules for photocatalytic reaction. On the basis of experimental results, a possible rhodamine B degradation mechanism is proposed to explain the excellent photocatalytic efficiency of the Pt–TiO₂/Ag nanotube photocatalyst.     

Electron Transfer in Dye‐Sensitised Semiconductors Modified with Molecular Cobalt Catalysts: Photoreduction of Aqueous Protons

A visible‐light driven H₂ evolution system comprising of a Ru^II dye ( RuP ) and Co^III proton reduction catalysts ( CoP ) immobilised on TiO₂ nanoparticles and mesoporous films is presented. The heterogeneous system evolves H₂ efficiently during visible‐light irradiation in a pH‐neutral aqueous solution at 25 °C in the presence of a hole scavenger. Photodegradation of the self‐assembled system occurs at the ligand framework of CoP , which can be readily repaired by addition of fresh ligand, resulting in turnover numbers above 300 mol H₂ (mol CoP )^?1 and above 200,000 mol H₂ (mol TiO₂ nanoparticles)^?1 in water. Our studies support that a molecular Co species, rather than metallic Co or a Co‐oxide precipitate, is responsible for H₂ formation on TiO₂. Electron transfer in this system was studied by transient absorption spectroscopy and time‐correlated single photon counting techniques. Essentially quantitative electron injection takes place from RuP into TiO₂ in approximately 180 ps. Thereby, upon dye regeneration by the sacrificial electron donor, a long‐lived TiO₂ conduction band electron is formed with a half‐lifetime of approximately 0.8 s. Electron transfer from the TiO₂ conduction band to the CoP catalysts occurs quantitatively on a 10 μs timescale and is about a hundred times faster than charge‐recombination with the oxidised RuP . This study provides a benchmark for future investigations in photocatalytic fuel generation with molecular catalysts integrated in semiconductors.