A new three-dimensional cobalt phosphate: Co5(OH2)4(HPO4)2(PO4)2

A three-dimensional (3D) cobalt phosphate: Co₅(OH₂)₄(HPO₄)₂(PO₄)₂ (1), has been synthesized by hydrothermal reaction and characterized by single-crystal X-ray diffraction, thermogravimetric analysis, and magnetic techniques. The title compound is a template free cobalt phosphate. Compound 1 exhibits a complex net architecture based on edge- and corner-sharing of CoO₆ and PO₄ polyhedra. The magnetic susceptibility measurements indicated that the title compound obeys Curie-Weiss behavior down to a temperature of 17 K at which an antiferromagnetic phase transition occurs.     

Hydrothermal synthesis and characterization of the first 1-D indiumphosphate chain In2(HPO4)2(H2PO4)2F2·C4N2H12, a precursor for high dimensional structures

The first one-dimensional (1-D) indiumphosphate chain, In₂(HPO₄)₂(H₂PO₄)₂F₂·C₄N₂H₁₂ (1), has been hydrothermally prepared using piperazine (PIP) as a template. The structure consists of infinite chains of trans,trans-corners-sharing InO₄F₂ octahedra with the adjacent octahedra being bridged by tetrahedral PO₃(OH) and PO₂(OH)₂ units, which are H-bonded with amine groups of the organic cations. Interestingly, this macroanionic chain InP₂O₈H₃F⁻ is similar to that found in the mineral tancoite-like chains and has potential to further set up higher-dimensional networks. On heating 1 in the presence of additional phosphoric acid at 180 °C under hydrothermal condition, compound 2, In₂(OH)(H₂O)(PO₄)₂·H₃O·H₂O, possessed a 3-D structure building from the repetition of a secondary building unit is obtained. When 1 is heated with additional PIP, an unknown phase, compound 3 is formed. Finally, on treatment with another amine, such as diethylenetriamine or 1,4-diaminobutane, at 180 °C, 1, as a precursor, can convert into a previously known 3-D framework structure with 16-membered ring compound 4. Compounds 1 and 2 are determined by single-crystal X-ray diffraction. Furthermore, 1 is characterized by X-ray powder diffraction, IR spectroscopy, inductively coupled plasma analysis, thermogravimetric analysis and differential thermal analysis.     

Synthesis, structure, solid-state thermolysis, and thermodynamic properties of new heterometallic complex Li2Co2(Piv)6(NEt3)2

The reaction of lithium pivalate, polymeric cobalt pivalate [Co(Piv)₂]_n, and triethylamine in THF at 60 °С afforded the new heterometallic antiferromagnetic complex Li₂Co₂(Piv)₆(NEt₃)₂ (2). The molecular and crystal structure of complex 2 was established and its magnetic behavior was studied. The vaporization and solid-state thermolysis of 2 were investigated. The thermodynamic characteristics of complex 2 were determined. The results of the present study show that complex 2 can be used as a potential molecular precursor for the synthesis of thin films of lithium cobaltate LiCoO₂.     

One-dimensional chains in uranyl tungstates: Syntheses and structures of A8[(UO2)4(WO4)4(WO5)2] (A=Rb, Cs) and Rb6[(UO2)2O(WO4)4]

Three new uranyl tungstates, A₈[(UO₂)₄(WO₄)₄(WO₅)₂] (A=Rb (1), Cs (2)), and Rb₆[(UO₂)₂O(WO₄)₄] (3), were prepared by high-temperature solid-state reactions and their structures were solved by direct methods on twinned crystals, refined to R₁=0.050, 0.042, and 0.052 for 1, 2, and 3, respectively. Compounds 1 and 2 are isostructural, monoclinic P2₁/n, (1): a=11.100(7), b=13.161(9), , β=90.033(13)°, , Z=8 and (2): , , , β=89.988(2)°, , Z=8. There are four symmetrically independent U⁶⁺ sites that form linear uranyl [O=U=O]²⁺ cations with rather distorted coordination in their equatorial planes. There are six W positions: W(1) and W(2) have square-pyramidal coordination (WO₅), whereas W(3), W(4), W(5), and W(6) are tetrahedrally coordinated. The structures are based upon a novel type of one-dimensional (1D) [(UO₂)₄(WO₄)₄(WO₅)₂]⁴⁻ chains, consisting of WU₄O₂₅ pentamers linked by WO₄ tetrahedra and WO₅ square pyramids. The chains run parallel to the a-axis and are arranged in modulated pseudo-2D-layers parallel to (0 1 0). The A⁺ cations are in the interlayer space between adjacent pseudo-layers and provide a 3D integrity of the structures. Compounds 1 and 2 are the first uranyl tungstates with 2/3 of W atoms in tetrahedral coordination. Such a high concentration of low-coordinated W⁶⁺ cations is probably responsible for the 1D character of the uranyl tungstate units. The compound 3 is triclinic, P1¯ a=10.188(2), b=13.110(2), , α=97.853(3), β=96.573(3), γ=103.894(3)°, , Z=4. There are four U positions in the structure with a typical coordination of a pentagonal bipyramid that contain uranyl ions, UO₂²⁺, as apical axes. Among eight W sites, the W(1), W(2), W(3), W(4), W(5), and W(6) atoms are tetrahedrally coordinated, whereas the W(7) and W(8) cations have distorted fivefold coordination. The structure contains chains of composition [(UO₂)₂O(WO₄)₄]⁶⁻ composed of UO₇ pentagonal bipyramids and W polyhedra. The chains involve dimers of UO₇ pentagonal bipyramids that share common O atoms. The dimers are linked into chains by sharing corners with WO₄ tetrahedra. The chains are parallel to [−101] and are arranged in layers that are parallel to (1 1 1). The Rb⁺ cations provide linkage of the chains into a 3D structure. The compound 1 has many structural and chemical similarities to its molybdate analog, Rb₆[(UO₂)₂O(MoO₄)₄]. However, the compounds are not isostructural. Due to the tendency of the W⁶⁺ cations to have higher-than-fourfold coordination, part of the W sites adopt distorted fivefold coordination, whereas all Mo atoms in the Mo compound are tetrahedrally coordinated. Distribution of the WO₅ configurations along the chain extension does not conform to its ‘typical’ periodicity. As a result, both the chain identity period and the unit-cell volume are doubled in comparison to the Mo analog, which leads to a new structure type.     

Magnetic and catalytic properties of the 2D copper(II) functionalized VPO hybrid system [{Cu(bpy)}2(VO)3(PO4)2(HPO4)2]·2H2O

The hybrid 2D compound [{Cu(bpy)}₂(VO)₃(PO₄)₂(HPO₄)₂]·2H₂O (1), has been investigated due to its interesting magnetic and catalytic properties. Compound (1) acts as an efficient catalyst in the epoxidation of cyclohexene and styrene. The chemoselectivity towards the epoxidation of cyclohexene is notoriously higher than the one observed towards styrene. The bulk antiferromagnetic behaviour of [{Cu(bpy)}₂(VO)₃(PO₄)₂(HPO₄)₂]·2H₂O (1) can be well described with a pentanuclear model, using five J values. Both antiferromagnetic and ferromagnetic interactions mediated by phosphate bridges are found to be present in this hybrid copper(II)–vanadium(IV) material.     

Solvent-dependent formation of two different Cd(II) complexes with p-BrC6H4C(S)NHP(O)(OiPr)2 (HL). Crystallographic modification of Cd(HL)2L2

Reaction of the potassium salt of N-(diisopropoxyphosphoryl)-p-bromothiobenzamide p-BrC₆H₄C(S)NHP(O)(OiPr)₂ (HL) with Cd(II) cations in freshly dried and distilled EtOH leads exclusively to the complex [Cd(p-BrC₆H₄C(S)NH₂-S)(L-O,S)₂] ([Cd(L^I)L₂]), while the same reaction in H₂O leads to the complex [Cd(HL-O)₂(L-O,S)₂] ([Cd(HL)₂L₂]). The corresponding reactions with Zn(II) always lead to the complex [Zn(L-O,S)₂] ([ZnL₂]) regardless of the solvent. The crystal structure of [Cd(HL)₂L₂]^.2/3H₂O reveals to be a polymorph to the previously reported anhydrous [Cd(HL)₂L₂].     

Synthesis of [Ru(CO)2(PPh3)(SP)] and [Ru(CO)(PPh3)2(SP)] and their catalytic activities for the hydroamination of phenylacetylene

The reaction of [Ru(CO)₂(PPh₃)₃] (1) with o-styryldiphenylphophine (SP) (2) gave [Ru(CO)₂(PPh₃)(SP)] (3) in 83% yield. This styrylphosphine ruthenium complex 3 can also be synthesized by the reaction of [Ru(p-MeOC₆H₄NN)(CO)₂(PPh₃)₂]BF₄ (4) with NaBH₄ and 2 in 50% yield. When “Ru(CO)(PPh₃)₃” generated by the reaction of [RuH₂(CO)(PPh₃)₃] (8) with trimethylvinylsilane reacted with 2, [Ru(CO)(PPh₃)₂(SP)] (10) was produced in moderate yield as an air sensitive solid. The spectral and X-ray data of these complexes revealed that the coordination geometries around the ruthenium center of both complexes corresponded to a distorted trigonal bipyramid with the olefin occupying the equatorial position and the C-C bonding in the olefin moiety in 3 and 10 contained a significant contribution from a ruthenacyclopropane limiting structure. Complexes 3 and 10 showed catalytic activity for the hydroamination of phenylacetylene 11 with aniline 12. Ruthenium complex 3 in the co-presence of NH₄PF₆ or H₃PW₁₂O₄₀ proves to be a superior catalyst system for this hydroamination reaction. In the case of the reaction using H₃PW₁₂O₄₀ as an additive, ketimines (13) was obtained in 99% yield at a ruthenium-catalyst loading of 0.1 mol%. Some aniline derivatives such as 4-methoxy, 4-trifluoromethyl-, and 4-bromoanilines can also be used in this hydroamination reaction.     

Synthesis,crystal structure and magnetic properties of the helical oxalate-bridged copper(II) chain {[(CH3)4N]2[Cu(C2O4)2] · H2O}n

The preparation, crystal structure and magnetic properties of a new oxalate-containing copper(II) chain of formula {[(CH₃)₄N]₂[Cu(C₂O₄)₂] · H₂O}_n (1) [(CH₃)₄N⁺ = tetramethylammonium cation] are reported. The structure of 1 consists of anionic oxalate-bridged copper(II) chains, tetramethylammoniun cations and crystallization water molecules. Each copper(II) ion in 1 is surrounded by three oxalate ligands, one being bidentate and the other two exhibiting bis-bidenate coordination modes. Although all the tris-chelated copper(II) units from a given chain exhibit the same helicity, adjacent chains have opposite helicities and then an achiral structure results. Variable-temperature magnetic susceptibility measurements of 1 show the occurrence of a weak ferromagnetic interaction through the oxalate bridge [J = +1.14(1) cm⁻¹, the Hamiltonian being defined as H = –J ∑_nmS_i · S_j]. This value is analyzed and discussed in the light of available magneto-structural data for oxalate-bridged copper(II) complexes with the same out-of-plane exchange pathway.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Two tantalum fluorides templated with tren: [H4tren](TaF7)2·H2O and [H4tren](TaF7)2

Using tris(2-aminoethyl)amine [(C₂H₄NH₂)₃N] (tren) as a template, two new tantalum fluorides are obtained by slow evaporation of solutions: [H₄tren](TaF₇)₂·H₂O (I) and [H₄tren](TaF₇)₂ (II). The structure determinations are performed by single crystal X-ray technique. Structures of I and II are built up from isolated TaF₇ distorted monocapped trigonal prisms or pentagonal bipyramids; charge balance is achieved by tetraprotonated [H₄tren]⁴⁺ cations which possess a “scorpion” configuration. In I and II, TaF₇ polyhedra, connected by hydrogen bonds with water molecules in I, lie in corrugated layers; hydrogen bond networks ensure the cohesion between these layers and [H₄tren]⁴⁺cations.     

Syntheses and X-ray crystallographic studies of {[Ni(en)2(pot)2]0.5CHCl3} and [Ni(en)2](3-pytol)2

Two novel Ni(II) complexes {[Ni(en)₂(pot)₂]0.5CHCl₃} (3) {pot = 5-phenyl-1,3,4-oxadiazole-2-thione} (1) and [Ni(en)₂](3-pytol)₂ (4) {3-pytol = 5-(3-pyridyl)-1,3,4-oxadiazole-2-thiol} (2) have been synthesized using en as coligand. The metal complexes have been characterized by physical and analytical techniques and also by single crystal X-ray studies. The complexes 3 and 4 crystallize in monoclinic system with space group P21/a and P121/c, respectively. The complex 3 has a slightly distorted octahedral geometry with trans (pot)⁻ ligands while 4 has a square planar geometry around the centrosymmetric Ni(II) center with ionically linked trans (3-pytol)⁻ ligands. The π?π (face to face) interaction plays an important role along with hydrogen bondings to form supramolecular architecture in both complexes.     

Four isomers from the oxidative addition of Me3SnH to Os(CO)2(PPh3)3 and the crystal structure of Os(SnMeI2)I(CO)2(PPh3)2, in which the pairs of CO and PPh3 ligands are mutually trans

Reaction between Os(CO)₂(PPh₃)₃ and Me₃SnH produces Os(SnMe₃)H(CO)₂(PPh₃)₂ (1). Multinuclear NMR studies of solutions of 1 reveal the presence of four geometrical isomers, the major one being that with mutually cis triphenylphosphine ligands and mutually trans CO ligands. Os(SnMe₃)H(CO)₂(PPh₃)₂ undergoes a redistribution reaction, at the trimethylstannyl ligand, when treated with Me₂SnCl₂ giving Os(SnMe₂Cl)H(CO)₂(PPh₃)₂ (2). Solutions of 2 again show the presence of four isomers but now the major isomer is that with mutually trans triphenylphosphine ligands and mutually cis CO ligands. The redistribution reaction of 1 with SnI₄ produces Os(SnMeI₂)H(CO)₂(PPh₃)₂ (3) which exists in solution as only one isomer, that with mutually trans triphenylphosphine ligands and mutually trans CO ligands. Treatment of 3 with I₂ cleaves the Os-H bond with retention of geometry giving Os(SnMeI₂)I(CO)₂(PPh₃)₂ (4). The crystal structure of 4 has been determined. No isomerization of the trans dicarbonyl complex 4 occurs when 4 is heated, instead there is a formal loss of “MeSnI” and formation of OsI₂(CO)₂(PPh₃)₂ (5).     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Supramolecular structures containing ‘isolated’ pentaborate anions and non-metal cations: Crystal structures of [Me3NCH2CH2OH][B5O6(OH)4] and [4-MepyH, 4-Mepy][B5O6(OH)4]

The solid-state structures of two non-metal pentaborates [Me₃NCH₂CH₂OH][B₅O₆(OH)₄] (1) and [4-MepyH, 4-Mepy][B₅O₆(OH)₄] (2) have been determined by single-crystal X-ray diffraction methods. Structures 1 and 2 both contain supramolecular pentaborate frameworks held together by extensive H-bond interactions. The framework of 1 exists essentially as planes of pentaborate anions linked via three pairwise ‘planar’ β → α interactions, with a fourth β → β interaction crosslinking the planes. The framework of 2 is very similar except that one of the three pairwise linkages within the plane is replaced by pairwise ‘step-like’ bifurcated H-bonds to both α sites of a neighboring anion. The cations in 1 and the cations and neutral 4-Mepy ligands in 2 are present in the framework cavities and channels, with additional H-bond interactions existing between cations and anions.     

Rearrangement of phosphinohydrazide ligand -NPh-N(PPh2)2 in transition metal coordination sphere: Synthesis and characterization of nickel and cobalt spirocyclic complexes M(NPh-PPh2N-PPh2)2 and their properties

The reaction of diphosphinohydrazine PhNH-N(PPh₂)₂ (1) with cobalt(II) silylamide, Co[N(SiMe₃)₂]₂, proceeds via formation of unstable phosphinohydrazide complex Co[NPh-N(PPh₂)₂]₂ followed by rearrangement to a new chelating compound Co(NPh-PPh₂N-PPh₂)₂ (2). Disproportionation of nickel(I) silylamide, (Ph₃P)₂Ni-N(SiMe₃)₂, in the presence of 1, yields Ni(0) and Ni(II) phosphinoamide complexes: Ni[(Ph₂P)₂N-NPhH]₂ (3), Ni(NPh-PPh₂N-PPh₂)₂ (4). X-ray analysis reveals tetrahedral environment of the cobalt atom in 2 and square-planar environment of the nickel atom in cis-4. In contrast to the crystalline patterns, the solutions of 2 in THF or toluene have EPR signal which is typical to square-planar low-spin d⁷ cobalt complex. The reactions of 2 with dioxygen, elemental sulfur and diphenyldiazomethane led to the spirocyclic insertion products Co(NPh-PPh₂N-PPh₂X)₂ (X = O, S, NNCPh₂) while the absorption of carbon monoxide is reversible.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Exchange of boryl ligand substituents in Os[B(OEt)2]Cl(CO)(PPh3)2

Reaction between Os[B(OEt)₂]Cl(CO)(PPh₃)₂ and 1,2-ethanediol in the presence of Me₃SiCl (1 equivalent) leads to the tethered boryl complex, Cl(CO)(PPh₃)₂ (1), in which one ethoxy substituent on the boryl ligand is exchanged with one hydroxy group of the 1,2-ethanediol leaving the other OH group available to coordinate to osmium, so giving a six coordinate complex. This formulation is confirmed by crystal structure determination. The same reactants, but with 2 equivalents of Me₃SiCl, lead to the yellow, coordinatively unsaturated complex, OsCl(CO)(PPh₃)₂ (2). Complex (2) adds CO to give OsCl(CO)₂ (PPh₃)₂ (3). Crystal structure determinations of 2 and 3 reveal a very marked difference in the Os-B distances found in the five coordinate complex 2 (2.043(4) Å) and the six coordinate complex 3 (2.179(7) Å). In a reaction similar to that used for forming 2 but with 1,3-propanediol replacing 1,2-ethanediol, the product is OsCl(CO)(PPh₃)₂ (4). The crystal structure for 4 is also reported.     

A 2-iridathiophene from reaction between IrCl(CS)(PPh3)2 and Hg(CHCHPh)2

The thiocarbonyl analogue of Vaska’s compound is produced in high yield by first treating IrCl(CO)(PPh₃)₂ with CS₂ and methyl triflate to give [Ir(κ²-C[S]SMe)Cl(CO)(PPh₃)₂]CF₃SO₃ (1), secondly, reacting 1 with NaBH₄ to give IrHCl(C[S]SMe)(CO)(PPh₃)₂ (2), and finally heating 2 to induce elimination of both MeSH and CO to produce IrCl(CS)(PPh₃)₂ (3). When IrCl(CS)(PPh₃)₂ is treated with Hg(CHCHPh)₂ the novel 2-iridathiophene, Ir[SC₃H(Ph-3)(CHCHPh-5)]HCl(PPh₃)₂ (4) is produced. The X-ray crystal structure of the iodo-derivative of 4, Ir[SC₃H(Ph-3)(CHCHPh-5)]HI(PPh₃)₂ (5) confirms the unusual 2-metallathiophene structure. Treatment of IrCl(CS)(PPh₃)₂ with Hg(CHCPh₂)₂ produces both a coordinatively unsaturated 1-iridaindene, Ir[C₈H₅(Ph-3)]Cl(PPh₃)₂ (6) and a chelated dithiocarboxylate complex, Ir(κ²-S₂CCHCPh₂)Cl(CHCPh₂)(PPh₃)₂ (7). X-ray crystal structure determinations for 6 and 7 are reported.