Immunoaffinity purification and characterization of mitochondrial membrane-bound D-3-hydroxybutyrate dehydrogenase from <Emphasis Type="Italic">Jaculus orientalis</Emphasis>

Background  

The interconversion of two important energy metabolites, 3-hydroxybutyrate and acetoacetate (the major ketone bodies), is catalyzed by D-3-hydroxybutyrate dehydrogenase (BDH¹: EC 1.1.1.30), a NAD⁺-dependent enzyme. The eukaryotic enzyme is bound to the mitochondrial inner membrane and harbors a unique lecithin-dependent activity. Here, we report an advanced purification method of the mammalian BDH applied to the liver enzyme from jerboa (Jaculus orientalis), a hibernating rodent adapted to extreme diet and environmental conditions.     

l-myo-Inositol-1-Phosphate Synthase Expressed in Developing Organ: Isolation and Characterisation of the Enzyme from Human Fetal Liver

l-myo-inositol-1-phosphate synthase (MIPS; EC: 5.5.1.4) activity has been detected and partially purified for the first time from human fetal liver. Crude homogenate from the fetal liver was subjected to streptomycin sulphate precipitation and 0?C60?% ammonium sulphate fractionation followed by successive chromatography through DEAE cellulose and BioGel A 0.5-m columns. After the final chromatography, the enzyme was purified 51-fold and 3.46?% of MIPS could be recovered. The human fetal liver MIPS specifically utilised d-glucose-6-phosphte and NAD⁺ as its substrate and coenzyme, respectively. It shows pH optima between 7.0 and 7.5 while the temperature maximum was at 40?°C. The enzyme activity was remarkably stimulated by NH ₄ ⁺ , slightly stimulated by K⁺ and Ca²⁺ and highly inhibited by Zn²⁺, Cu²⁺ and Hg²⁺. The K _m values of MIPS for d-glucose-6-phosphate and NAD⁺ were found to be as 1.15 and 0.12?mM respectively while the V _max values were 280?nM and 252?nM for d-glucose-6-phosphate and NAD⁺ correspondingly. The apparent molecular weight of the native enzyme was determined to be 170?kDa.     

A novel metal chalcogenide: HgCd<Subscript>4</Subscript>S<Subscript>5</Subscript>

A novel metal chalcogenide HgCd₄S₅ (1) was synthesized from solid-state reactions and structurally characterized. Compound 1 crystallizes in the space group C222₁ of the orthorhombic system with four formula units in a cell: a = 12.5661(5) Å, b = 7.2551(5) Å, c = 10.7520(7) Å, V = 980.2(1) ų, Cd₄HgS₅, M _r = 810.49, D _c = 5.492 g/cm³, S = 1.010, μ(MoK _α) = 25.128 mm^?1, F(000) = 1408, R = 0.0611 and wR = 0.1495. Compound 1 is characterized by a 3-D cadmium sulfide framework structure with the infinite mercury sulfide chains located in the cavities.     

Structural features of films based on star-shaped fullerene-containing polystyrenes: Small-angle neutron-scattering study

The structuring of films based on regular six-arm and twelve-arm polystyrenes with the arm characteristics M_n = 118 × 10³ and M_w/M_n = 1.06 and a fullerene (С₆₀) branching center in a weakly swollen state in a mixture of deuterated solvents (90 vol % D-methanol and 10 vol % D-toluene) is studied by small-angle neutron scattering. Analogous studies are performed for films based on linear polystyrene (M_n = 280 × 10³, M_w/M_n = 1.07) and its composites with fullerene С₆₀ (0.5 wt %). It is shown that, during saturation of the samples with the solvent D-toluene, filling of the free volume that forms chain-transport channels that have gyration radii of the order of diameters of macromolecules and unite to form submicron and micron structures occurs. The degree of filling of the free volume, which is maximum for the linear polymer, becomes minimum for polystyrene with the inserted free fullerene. In addition, the transition from the linear polymer to the six-arm polymer is related to a smaller degree of filling of the free volume due to the formation of thinner migration channels. As the amount of arms in macromolecules is increased to 12, permeability of the polymer matrix improves because molecular order partially appears in accordance with the model of the densest packing of solid spheres.     

Synthesis of Block Copolymers of Styrene with <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-Lactide by the Sequential Controlled Cationic Polymerization and Ring-Opening Anionic Polymerization

The cationic polymerization of styrene initiated by the system 2-chloro-2-phenylpropane–TiCl₄–pyridine is studied in a mixture CH₂Cl₂–n-hexane at a temperature of –80°С. It is shown that under these conditions polymerization occurs via the living mechanism at [monomer]: [initiator] ≤ 100. The method of preparing polystyrenes with terminal primary hydroxyl groups (M_n = 4000–10000 g/mol) by the sequential controlled cationic polymerization of styrene and the in situ alkylation of 4-phenoxy-1-butanol by polystyrene macrocations is proposed. The resulting functionalized polystyrenes are used as macroinitiators of anionic-coordination ring-opening polymerization of D,L-lactide in the presence of tin bis(2-ethyl hexanoate) [Sn(Oct)₂] in toluene at 80°С. Copolymers polystyrene-block-poly(D,L-lactide) with the controlled length of the poly(D,L-lactide) block (M_n = 10000–17000 g/mol) and a relatively low molecular-weight distribution (M_w/M_n = 1.6–1.8) are synthesized. Formation of the block copolymers is confirmed by ¹Н NMR spectroscopy, gel-permeation chromatography, and atomic force microscopy.     

Phase transitions in double molybdates K<Subscript>2</Subscript>M<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> with M = Mg or Co

Phase transitions and cation mobility in double molybdates K₂M ₂ ^II (MoO₄)₃ with M = Mg or Co and the products of their heterovalent doping with scandium(III) and vanadium(V) have been studied. The transition from low to high conductivity in K₂M ₂ ^II (MoO₄)₃ is the result of a two-stage phase transition, whose occurrence is significantly extended in time. Heterovalent substitutions noticeably decrease the heat of the phase transition. The transition to the low-temperature phase is not achieved even after long-term exposure.     

NAD<Superscript>+</Superscript> metabolite levels as a function of vitamins and calorie restriction: evidence for different mechanisms of longevity

Background

NAD⁺ is a coenzyme for hydride transfer enzymes and a substrate for sirtuins and other NAD⁺-dependent ADPribose transfer enzymes. In wild-type Saccharomyces cerevisiae, calorie restriction accomplished by glucose limitation extends replicative lifespan in a manner that depends on Sir2 and the NAD⁺ salvage enzymes, nicotinic acid phosphoribosyl transferase and nicotinamidase. Though alterations in the NAD⁺ to nicotinamide ratio and the NAD⁺ to NADH ratio are anticipated by models to account for the effects of calorie restriction, the nature of a putative change in NAD⁺ metabolism requires analytical definition and quantification of the key metabolites.

Results

Hydrophilic interaction chromatography followed by tandem electrospray mass spectrometry were used to identify the 12 compounds that constitute the core NAD⁺ metabolome and 6 related nucleosides and nucleotides. Whereas yeast extract and nicotinic acid increase net NAD⁺ synthesis in a manner that can account for extended lifespan, glucose restriction does not alter NAD⁺ or nicotinamide levels in ways that would increase Sir2 activity.

Conclusions

The results constrain the possible mechanisms by which calorie restriction may regulate Sir2 and suggest that provision of vitamins and calorie restriction extend lifespan by different mechanisms.

     

K2NaGaP2, Cs2NaGaP2, K2NaGaAs2, K2NaInP2 und K2NaInAs2, Verbindungen mit den SiS2-isosteren Polyanionen [MX4/2]3− (MGa,In; XP,As)

K₂NaGaP₂, Cs₂NaGaP₂, K₂NaGaAs₂, K₂NaInP₂ and K₂NaInAs₂, Compounds with the Polyanions [MX_4/2]^3? (M?Ga, In; X?P, As) isosteric with SiS₂ The title compounds are synthesized from stoichiometric mixtures of the elements or from Na, KP(KAs), Cs₄P₆ and MX (M?Ga, In; X?P, As) at 950K. They are isotypic and crystallize in the space group Ibam (No. 72) with Z=4. The anionic partial structure is characterized by infinite chains [MX_4/2]^3? which are isosteric to SiS₂. Vibrational spectra are measured and interpreted based on the symmetry D_4h-P(2/m 2/c)4₂/m of the isolated polymer chain [MX₂]^3?. A good agreement between observed and calculated frequencies is obtained by using a force field of the tetrameric fragment [M₄X₁₀]^18? (three four-membered M₂X₂ rings).     

Solubilization of cholesterol in aqueous solution by two β-cyclodextrin dimers and a negatively charged β-cyclodextrin derivative

Two βCD dimers (linked by succinic acid, 2, or ethylenediaminetetraacetic acid, EDTA, 3, bridges) and a negatively charged monomer derivative of βCD, 1, have been synthesized and their ability to solubilize cholesterol in aqueous solution was studied. The three compounds exhibit a great capacity in solubilizing cholesterol as, for instance, concentrations up to 6 mM of cholesterol were measured in the presence of 25 mM of 3. The phase-solubility diagrams of the two dimers exhibit A _L type profiles while the monomer 1 follows an A _P isotherm. The cholesterol/dimer complexes have 1:1 stoicheiometries while monomer 1 forms two complexes with molar ratios of 1:1 and 1:2 (cholesterol/1). The equilibrium constants are K _1:1 = (5.9 ± 0.3) × 10⁴ M^?1 and K _1:1 = (8.8 ± 0.2) × 10⁴ M^?1 for 2 and 3, respectively, and K _1:1 = 73 ± 19 M^?1 and K _1:2 = 204 ± 65 M^?1 for 1. The comparison of K _1:1(3) with the product K _1:1 × K _1:2 (1) reveals that a chelate effect in binding the cholesterol by 3 exists. The structure of the cholesterol/3 complex was studied by ROESY experiments and by molecular dynamics simulations.     

The activation of C-H bonds in C<Subscript>1</Subscript>-C<Subscript>3</Subscript> alkanes by zirconium(III,IV) and titanium(III,IV) hydrides immobilized on the surface of SiO<Subscript>2</Subscript>: a density functional theory study

Model reactions of the (≡Si-O-)₃M^IVH (1), (≡Si-O-)₂M^IVH₂ (2), and (≡Si-O-)₂M^IIIH (3) hydrides, where M = Ti and Zr, immobilized on the surface of silica with methane and propane were studied by the density functional theory with the PBE functional. The reactions involved the breaking of C-H alkane bonds and the formation of the (≡Si-O-)₃MR, (≡Si-O-)₂M(H)R, and (≡Si-O-)₂MR products (R = Me, n-Pr, and i-Pr), respectively. Reactions with the participation of 1 and 2 were found to occur as bimolecular processes without the formation of agostic-type prereaction complexes. With 3, the reaction was accompanied by the formation of stable prereaction and postreaction complexes. The conclusion was drawn that dihydrides 2 and trivalent metal hydrides 3 were much more reactive with respect to alkane C-H bonds than monohydrides 1. All the systems studied were characterized by low reaction regioselectivities.     

Formation of mononuclear rhodium(III) sulfates: <Superscript>103</Superscript>Rh and <Superscript>17</Superscript>O NMR study

It was shown that the monomeric rhodium sulfate complexes [Rh(H₂O)₄(SO₄)]⁺, trans-[Rh(H₂O)₂(SO₄)₂]^?, cis-[Rh(H₂O)₂(SO₄)₂]^?, and [Rh(SO₄)₃]^3? were not predominant forms in aqueous solutions. The ¹⁰³Rh NMR chemical shifts of the complexes were assigned, and the conditions for their formation in solutions, concentration parameters, and acidity at which the fraction of the monomers was maximal were determined. The constants of formation of the complexes and ion pair (IP) were estimated: K _IP = 8 ± 3.5, K ₁ ≈ 8, K _2trans ≈ 1, K _2cis ≈ 1, and K ₃ ≈ 2.     

Crystal and molecular structure of the potassium salt of 2,4-di-<Emphasis Type="Italic">iso</Emphasis>-propoxy-6-dinitromethyl-1,3,5-triazine

An X-ray diffraction study of the potassium salt of 2,4-di-iso-propoxy-6-dinitromethyl-1,3,5-triazine was performed. Monoclinic crystals, C₁₀H₁₄N₅O ₆ ^? ·K⁺; M = 339.36; a = 9.645(2) Å, b = 8.803(2) Å, c = 17.686(3) Å; β = 92.50(2)°; V = 1500.2(5) Å ³, d _c = 1.50 g/cm³, Z = 4, space group P2₁/a. The 2,4-di-iso-propoxy-6-dinitromethyl-1,3,5-triazine anion is nonplanar. The 1,3,5-triazine heterocycle is planar; the angle between the ring and the dinitromethyl fragment is 87.9(5)°. The potassium cation is in the general position; its coordination number is 7. The cation is bonded to four 2,4-di-iso-propoxy-6-dinitromethyl-1,3,5-triazine molecules. Infinite layers are formed due to the coordination bonds in crystal.     

Supramolecular architecture of catechol and its 2:1 complex with dimethylsulfoxide

The crystal structures of catechol (o-dihydroxybenzene) and its 2:1 complex with dimethylsulfoxide are determined at T = 150 K. Crystal data: C₁₄H₁₈O₅S, M = 298.37, triclinic, space group P \(\bar 1\), unit cell parameters: a = 7.7285(13) Å, b = 9.9924(17) Å, c = 10.3188(18) Å, α = 89.963(4)°, β = 89.968(4)°, γ = 69.076(5)°, V = 744.3(2)ų, Z = 2, D _x = 1.331 g/cm³, R1 = 0.048; C₆H₆O₂, M = 110.11, monoclinic, space group P2₁/n, a = 9.8206(6)Å, b = 5.5903(3)Å, c = 10.4439(6)Å, β = 114.952(2)°; V = 519.85(5) ų, Z = 4, D _x = 1.407 g/cm³, R1 = 0.0289. In the 2:1 complex the molecules are joined in a supramolecular ensemble by D-H...A hydrogen bonds (D = O, C; A = O, π); in catechol they are bonded only by O-H...O. The state diagram of the catechol-dimethylsulfoxide system is examined by DTA.     

The adsorption of H<Subscript>2</Subscript>O and D<Subscript>2</Subscript>O on porous polystyrene adsorbents

The adsorption of H₂O and D₂O on porous polymers, Chromosorb-102 (styrene-divinylbenzene copolymer) and MN-200 (supercross-linked polystyrene), was studied by gas chromatography. Test adsorbates used to study the properties of the surface of these polymers were n-alkanes (C₆-C₉), C₆H₆, and the polar compounds CHCl₃, CH₃NO₂, CH₃CN, (CH₃)₂CO, C₂H₅COOCH₃, and (C₂H₅)₂O. The experimental data on the retention of the sorbates were used to determine the contributions of dispersion and specific intermolecular interactions to the total energy of adsorption for the systems studied. The electron donor K _D and electron acceptor K _A characteristics of the surfaces of Chromosorb-102 and MN-200 were determined. The K _D and K _A values obtained allow these polymers to be classified as weakly specific adsorbents with the predominance of electron acceptor properties. The adsorption isotherms of H₂O and D₂O were measured at 55, 67, and 80°C. The dependences of the isosteric heats of adsorption Q _st on adsorption values were determined. The conclusion was drawn that H₂O interacted with the surface of the polymers by the adsorption mechanism, whereas absorption likely made a noticeable contribution to the retention of D₂O.     

Alkyl Ammonium Ion Selectivity of Hexahomotrioxacalix[3]arene Triamide Derivative having the Intramolecular Hydrogen-Bonding Group

The lower rim functionalized hexahomotrioxacalix[3]arene triamide 4 with cone-conformation was synthesized from triol 1 by a stepwise reaction. The different extractability for alkali metal ions, transition metal ions, and alkyl ammonium ions from water into dichloromethane is discussed. Due to the strong intramolecular hydrogen bonding between the neighboring NH and CO groups in triamide 4, its affinity to metal cations was weakened. Triamide 4 shows a single selectivity to n-BuNH ₃ ⁺ . The anion complexation of triamide 4 was also studied by ¹H NMR titration experiments. Triamide 4 binds halides through the intermolecular hydrogen bonding among the NH hydrogens of amide in a 1:1 fashion in CDCl₃. The association constants calculated from these changes in chemical shifts of the amide protons are K _a = 223 M^?1 for Cl^? and K _a = 71.7 M^?1 for Br^?. Triamide 4 shows a preference for Cl^? complexation than Br^? complexation.     

On the complexation of some univalent cations with beauvericin in nitrobenzene saturated with water

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺(aq)?+?1·Cs⁺(nb) ? 1·M⁺(nb)?+?Cs⁺(aq) taking place in the two-phase water–nitrobenzene system (M⁺?=?Li⁺, Na⁺, K⁺, Rb⁺, H₃O⁺, NH₄ ⁺, Tl⁺; 1?=?beauvericin; aq?=?aqueous phase, nb?=?nitrobenzene phase) were determined. Moreover, the stability constants of the 1·M⁺ complexes in water-saturated nitrobenzene were calculated; they were found to increase in the series of Rb^+?<?Na⁺, H₃O^+?<?Tl^+?<?NH ₄ ^+? <?K^+?<?Li⁺.     

Syntheses and crystal structures of (2.2.2-cryptand)potassium chloride and (2.2.2-cryptand)ammonium bromide<Subscript>(0.75)</Subscript>chloride<Subscript>(0.25)</Subscript> hydrates

Two new complexes were synthesized, namely, 7: 2 (2.2.2-cryptand)potassium chloride and (2.2.2-cryptand)ammonium bromide_(0.75)chloride_(0.25) hydrates: [M(Crypt-222)]⁺ · Hal^? · 3.5H₂O, where M = K, Hal = Cl (I) and M = NH₄, Hal = Br_0.75Cl_0.25 (II). The structures of two isomorphous crystals were studied by X-ray diffraction analysis. Trigonal (space group P \(\bar 3\), Z = 2) structures I (a = 11.763 Å, c = 11.262 Å) and II (a = 11.945 Å, c = 11.337 Å) were solved by direct methods and refined by the full-matrix least-squares method in the anisotropic approximation to R = 0.057 (I) and 0.065 (II) for all 2626 (I) and 1654 (II) independent measured reflections (CAD-4 automated diffractometer, λMoK _α). In structures I and II, the host-guest [M(Crypt-222)]⁺ complex cation lies on the threefold crystallographic axis and has the approximate D ₃ symmetry. In complex I, the coordination polyhedron of the K⁺ cation (CN = 8) is a bicapped trigonal prism somewhat distorted toward an antiprism. Complexes I and II contain H-bonded disordered cubes of the water molecules and the Cl^? or Br^? anions.     

Asymmetric Synthesis of Phosphinous Tungsten Complexes

Abstract

The asymmetric synthesis of phosphinous compounds from diheterophosphacycloal kane-1,3,2 was investigated in a transition metal complex series. Complexes 1 and 2 were prepared from diaminophosphine, (?)-ephedrine and W (CO)₅ THP (1: δ³¹ P=+147,6 ppm; J_PW=313 Hz M^.+=595;2 δ³ p=+156 ppm J_PW=304 Hz M^.+=533; 90%dp) in two steps. Methyl lithium reacted with 1 to give stereospecific 3 (83%Yield) by P-O linkage (3 δ³¹ P=+64 ppm; J_PW =261 Hz; M^.+ ? 28=583). The aminophosphine complex 3 was stereochemically stable and was used for studies of synthetic applications. HCL gas reacted with 3 in CH₂Cl₂ to give the non optically active chlorophosphine complex 4 (δ³¹ P=+103,6 ppm; J_PW=290 Hz; M^.+ =482). This compound immediately gave salt 6 (δ³¹ P=+66,7 ppm; J_PW =240 Hz) by reaction with (?)-menthol and triethylamine. The acid methanolysis of 3 gave a mixture of 5 and 6 and the unchanged (?)-ephedrine salt [5:30% yield; δ³¹ P=+114 ppm; J_pw=280 Hz; [α]_D=+1,2° (CH₂Cl₂); M^.+=478; 6 : 60% yield; δ³¹p=+102,9 ppm; J_PW=264 Hz; [α]_D =+16,9° (CH₂Cl₂); M^.+=464]. Compound 6 was thus obtained with a 80% yield and a specific rotation of + 20,2° (CH₂Cl₂) in isopropanol/H₂SO₄ 5M medium. The enantiomeric excess of 6 was determined by RMN³¹P. Acid hydrolysis of 3 or the reaction with CH₃SO₃H, gave phosphinous acid complex 6 with an optical rotation of + 4,8° or ?1,8° respectively. These results provide precious informations about the stereochemistry and reactivity of the P-N linkage in this aminophosphine transition metal series, which differs notably from that of the corresponding (PO) N bond.     

Quantum-chemical study of ytterbium fluorides and of complex F<Subscript>2</Subscript>YbF<Subscript>2</Subscript>CeF<Subscript>2</Subscript>

The structural parameters of the (²Σ⁺//C_∞v)-YbF, (¹A₁//C_2v)-YbF2, (²A₂^′//D_3h)-YbF₃, (¹Ag//D_2h)-YbF₂Yb, (¹Ag//C_2h)-FYbF₂YbF, (¹A₁//C_2v)-FYbF₂YbF, (¹A₁//C_2v)-YbF₂YbF₂, (³B_3u//D_2h)-F₂YbF₂YbF₂, (²A′//C_s)-FYbF₂YbF₂, and (³B₂//С_2v)-F₂YbF₂CeF₂ molecules have been determined. Disproportionation of ytterbium monofluoride (2YbF → YbF₂ + Yb + 0.46 eV) is less exothermic than dimerization (2YbF → YbF₂Yb + 2.10 eV). The bond energy of the ytterbium difluoride molecules in the trans dimer (2.93 eV) exceeds those in the cis dimer (2.86 eV) and the coaxial dimer (1.66 eV). Ytterbium trifluoride dimerizes exothermically (2.95 eV) without spin pairing. The dipole and quadrupole moments of the molecules as well as the charges and spin populations of the atoms and the valence electron configurations of the lanthanides have been calculated.     

Primary processes in the thiacyanine dimer-photosensitized reduction of p-nitroacetophenone in water by

Primary processes in the reduction of p-nitroacetophenone (p-NAP) by ascorbic acid (AA) in water photosensitized by thiacyanine dimers M ₂ ^2? have been considered. For M ₂ ^2? , the quantum yields of fluorescence and intersystem crossing to the triplet state (M ₂ ^2? )_T increases in comparison to the monomers M^?. The dimers (M ₂ ^2? )_T enter into the reactions of both one-electron photoreduction by ascorbic acid to give AA^+· and M ₂ ^3? and one-electron photooxidation by p-nitroacetophenone to give p-NAP^?· and the dimeric radical anion M ₂ ^? which dissociates to M^? and M^· within 25–30 μs. The primary oxidative or reductive photosensitization in the ternary systems containing (M ₂ ^2? )_T, p-NAP, and AA affords p-NAP^?· and AA^+·.