Influence of substituent position and cavity size of the regioisomers of monocarboxymethyl‐α‐, β‐, and γ‐cyclodextrins on the apparent stability constants of their complexes with both enantiomers of Tröger's base

Enantiomers of Tröger's base were separated by capillary electrophoresis using 2^I‐O‐, 3^I‐O‐, and 6^I‐O‐carboxymethyl‐α‐, β‐, and γ‐cyclodextrin and native α‐, β‐, and γ‐cyclodextrin as chiral additives at 0–12 mmol/L for β‐cyclodextrin and its derivatives and 0–50 mmol/L for α‐ and γ‐cyclodextrins and their derivatives in a background electrolyte composed of sodium phosphate buffer at 20 mmol/L concentration and pH 2.5. Apparent stability constants of all cyclodextrin–Tröger's base complexes were calculated based on capillary electrophoresis data. The obtained results showed that the position of the carboxymethyl group as well as the cavity size of the individual cyclodextrin significantly influences the apparent stability constants of cyclodextrin–Tröger's base complexes.     

Formation of a Polypseudorotaxane via Self‐Assembly of γ‐Cyclodextrin with Poly(N‐isopropylacrylamide)

A polypseudorotaxane (PPR) comprising γ‐cyclodextrin (γ‐CD) as host molecules and poly(N‐isopropylacrylamide) (PNIPAM) as a guest polymer is prepared via self‐assembly in aqueous solution. Due to the bulky pendant isopropylamide group, PNIPAM exhibits size‐selectivity toward self‐assembly with α‐, β‐, and γ‐CDs. It can fit into the cavity of γ‐CD to give rise to a PPR, but cannot pass through α‐CD and β‐CD under the same conditions. The ratio of the number of γ‐CD molecules to entrapped NIPAM repeat units is kept at 1:2.2 or 1:2.4, determined by ¹H NMR spectroscopy and TGA analysis, respectively, indicating that there are more than 2 but less than 3 NIPAM repeat units included by one γ‐CD molecule. This finding opens new avenues to PPR‐based supramolecular polymers to be used as solid, stimuli‐responsive materials.     

Supramolecular inclusion complexes of star‐shaped poly(ε‐caprolactone) with α‐cyclodextrin

Both star‐shaped poly(ε‐caprolactone) (PCL) having 4 arms (4sPCL) and 6 arms (6sPCL) and linear PCL having 1 arm (LPCL) and 2 arms (2LPCL) were synthesized and then investigated for inclusion complexation with α‐cyclodextrin (α‐CD). The supramolecular inclusion complexes (ICs) were in detail characterized by ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X‐ray diffraction, solid‐state carbon nuclear magnetic resonance spectroscopy using cross‐polarization and magic‐angle spinning, and Fourier transform infrared, respectively. The stoichiometry (CL:CD, mol:mol) of all ICs increased with the increasing branch arm of PCL polymers, and it was in the order of α‐CD‐6sPCL1 ICs > α‐CD‐4sPCL ICs > α‐CD‐2LPCL ICs > α‐CD‐LPCL ICs. All analyses indicated that the branch arms of star‐shaped PCL polymers were included into the hydrophobic α‐CD cavities and their original crystalline properties were completely suppressed. Moreover, the ICs of star‐shaped PCL with α‐CD had a channel‐type crystalline structure similar to that formed between the linear PCL and α‐CD. Furthermore, the thermal stability of the free PCL polymers probably controlled that of the guest polymers included in the ICs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4721–4730, 2005     

Remarkable Stabilization of the α‐Helix Structure by an Intramolecular Host‐Guest Bridge in a Cyclodextrin‐Peptide Hybrid

A cyclodextrin‐peptide hybrid (CD‐peptide) bearing three units of γ‐cyclodextrin, cholic acid, and a dansyl fluorophore in the side chain has been prepared. In this novel CD‐peptide, the cholic acid unit acts as an internal guest and forms an intramolecular inclusion complex with γ‐cyclodextrin in the CD‐peptide. This intramolecular complex works as a host‐guest bridge in the CD‐peptide and remarkably stabilizes the α‐helix structure of the CD‐peptide.     

α‐Cyclodextrin and methylmercury chloride: a new strategy to recover organomercurials

Methylmercury (MeHg) is one of the most toxic forms of mercury in the environment. It can be accumulated in fish through the food chain; after, consumption the fish is then dangerous to fetuses and younger children, causing abnormal brain development and nervous system disorders. Cyclodextrins (CDs) are cyclic oligosaccharides consisting of six, seven or eight units of glucose. In accord with the dimensions and hydrophilic–lipophilic properties, one can obtain inclusion of hydrophobic guests in a CD cavity. In the present work we used this characteristic of CD to obtain an inclusion compound between MeHgCl and the α‐cyclodextrin, looking for a new method to reduce MeHgCl toxicity and pre‐concentration. The inclusion compound was characterized through IR, ¹H, ¹³C NMR and Raman spectroscopy. ­X‐ray diffraction and thermal analysis (TG, DTG and DSC) methods were also used. Finally, biological tests were carried out and the minimum inhibitory concentrations (MICs) for MeHgCl, α‐cyclodextrin, the MeHgCl–CD complex and a physical mixture were determined. This host–guest strategy using cyclodextrins offers an alternative and powerful method for mercury remediation. Copyright © 2000 John Wiley & Sons, Ltd.     

Structure selective complexation of cyclodextrins with five polyphenols investigated by capillary electrokinetic chromatography

The complexation of five polyphenols, namely trans‐resveratrol, astilbin, taxifolin, ferulic acid, and syringic acid (guest molecules) with α‐, β‐, and γ‐cyclodextrin (host molecules), was investigated by capillary electrokinetic chromatography. The binding constants were calculated based on the effective electrophoretic mobility change of guests with the addition of cyclodextrins into the background electrolyte. Because of cavity size, cyclodextrins showed structure‐selective complexation property to different guest. The stability of the trans‐resveratrol complexes was in the order of β‐ > α‐ > γ‐cyclodextrin. The cavity size of α‐cyclodextrin was too small for astilbin and taxifolin molecules, and thus they could not form complexes. The molecular size of syringic acid was too big for all cyclodextrins cavity, and no cyclodextrin could form complexes with it. Temperature studies showed that the binding constants decreased with the rise of temperature. Enthalpy and entropy values were calculated and the negative values of these parameters indicated that the complexation process was enthalpy‐controlled. Van der Waals force and release of high‐enthalpy water molecules from the cyclodextrins cavity played important roles in the process.     

Morphological change of poly (ε‐caprolactone) with a wide range of molecular weight via formation of inclusion complex with α‐cyclodextrin

The effect of molecular weight of poly(ε‐caprolactone) (PCL) on the formation and stability of inclusion complexes (ICs) between α‐cyclodextrin (α‐CD) and PCL was investigated by FTIR, WAXD, and DSC measurements. ICs between α‐CD and PCLs with a wide range of number‐average molecular weight, M_n = 1.21 × 10⁴ – 1.79 × 10⁵, were prepared by mixing the aqueous solution of CD and acetone solution of PCL followed by stirring at 60 °C for 1h and at the room temperature for 1 day. FTIR, WAXD, and DSC measurement showed the PCL chains were included into the α‐CD cavity, and the crystallization of PCL was suppressed in the α‐CD cavity. Stoichiometry and yield of each IC varied with the molecular weight of guest PCL, and the effect of IC formation on the crystallization behaviour of guest polymer decreased with the increase of molecular weight of guest polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1433–1440, 2005     

The effect of γ‐cyclodextrin addition in the self‐assembly behavior of pyrene labeled poly(acrylic) acid with different chain sizes

The interaction between poly(acrylic acid) polymers (PAA) of low‐ (2000 g/mol) and high‐ (450,000 g/mol) molecular weight (M_w) hydrophobically modified with pyrene (PAAMePy) and β‐ and γ‐cyclodextrins (β‐CD, γ‐CD) was investigated with fluorescent techniques. The interaction with β‐CD promotes little variation in the spectral and photophysical behavior of the polymer, whereas significant changes are observed upon addition of γ‐CD. The degree of inclusion (between the pyrene groups of the polymer and the cyclodextrins) is followed through the observation of the changes in the absorption, excitation (collected in the monomer and excimer emission regions) and emission (I_E/I_M ratio) spectra and from time‐resolved data. Within the studied range of γ‐CD concentration, the fluorescence decays of the long chain (high M_w) PAAMePy polymers were found tri‐exponential in the monomer and excimer emission regions in agreement with previous studies. In the case of the low M_w PAAMePy polymers, tri‐exponential decays were observed at the monomer and excimer emission wavelengths. However, when a γ‐CD concentration of 0.01 and 0.03 M is reached for, respectively, the low‐ and high‐labeled pyrene short chain (low M_w) polymers, the fluorescence decays in the excimer region become biexponential (two excimers) with no rising component, thus showing that all pyrene groups are encapsulated (and preassociated) into the γ‐CD cavity. In the case of the high M_w polymers, the addition of γ‐CD has been found to change the level of polymer interaction from pure intramolecular (water in the absence of cyclodextrin) to a coexistence of intra‐ with intermolecular interactions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1402–1415, 2008     

Solubilization of Polycyclic Aromatics in Water by γ‐Cyclodextrin Derivatives

A series of hydrophilic per‐6‐thio‐6‐deoxy‐γ‐cyclodextrins (CDs) were synthesized from per‐6‐iodo‐6‐deoxy‐γ‐CD. These new hosts are able to solubilize polycyclic aromatic guests in aqueous solution to much higher extents than native CDs. Phase‐solubility diagrams were mostly linear in accordance with both 1:1 and 1:2 CD–guest complexes in aqueous solution. The stoichiometry of the inclusion complexes was further investigated by fluorescence spectroscopy, which revealed very pronounced Stokes shifts typical for 1:2 complexes. This finding was further consolidated by quantum mechanical calculations of dimer formation of the guests and space‐filling considerations by using the cross‐sectional areas of the CDs and guests. The calculated dimerization energies correlated well with the binding free energies measured for the 1:2 complexes, and provided the main contribution to the driving force of complexation in the γ‐CD cavity.     

Guest‐responsive excimer emission in an α‐helix peptide bearing γ‐cyclodextrin and two naphthalene units

An α‐helix peptide (17 amino acids) bearing γ‐cyclodextrin (γ‐CD) and two naphthyl units (γ‐N₂17) was designed and prepared as a new type of chemosensor. The α‐helix peptide with γ‐CD sandwiched between two naphthyl moieties exhibits excimer emission by inserting the two naphthalene moieties into the γ‐CD cavity from the opposite sides in the side chain of the peptide. The two reference peptides, which have one naphthalene moiety and one γ‐CD unit, exhibit only monomer fluorescence and have larger binding constants for the examined guests than γ‐N₂17.     

Morphology and dynamics of the poly(ϵ‐caprolactone)‐b‐poly(L‐lactide) diblock copolymer and its inclusion compound with α‐cyclodextrin: A solid‐state 13C NMR study

A biodegradable diblock copolymer of poly(ϵ‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA) was synthesized and characterized. The inclusion compound (IC) of this copolymer with α‐cyclodextrin (α‐CD) was formed and characterized. Wide‐angle X‐ray diffraction showed that in the IC crystals α‐CDs were packed in the channel mode, which isolated and restricted the individual guest copolymer chains to highly extended conformation. Solid‐state ¹³C NMR techniques were used to investigate the morphology and dynamics of both the bulk and α‐CD‐IC isolated PCL‐b‐PLLA chains. The conformation of the PCL blocks isolated within the α‐CD cavities was similar to the crystalline conformation of PCL blocks in the bulk copolymer. Spin–lattice relaxation time (T₁C) measurements revealed a dramatic difference in the mobilities of the semicrystalline bulk copolymer chains and those isolated in the α‐CD‐IC channels. Carbon‐observed proton spin–lattice relaxation in the rotating frame measurements (T_1ρH) showed that the bulk copolymer was phase‐separated, while, in the IC, exchange of proton magnetization through spin‐diffusion between the isolated guest polymer chains and the host α‐CD was not complete. The two‐dimensional solid‐state heteronuclear correlation (HetCor) method was also employed to monitor proton communication in these samples. Intrablock exchange of proton magnetization was observed in both the bulk semicrystalline and IC copolymer samples at short mixing times; however, even at the longest mixing time, interblock proton communication was not observed in either sample. In spite of the physical closeness between the isolated included guest chains and the host α‐CD molecules, efficient proton spin diffusion was not observed between them in the IC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2086–2096, 2005     

Crystal Structures of β‐Cyclodextrin Inclusion Complexes with 7‐Hydroxycoumarin and 4‐Hydroxycoumarin and Substituent Effects on Inclusion Geometry

Two inclusion complexes of β‐cyclodextrin‐7‐hydroxycoumarin ( 1 ) and β‐cyclodextrin‐4‐hydroxycoumarin ( 2 ) were prepared and their crystal structures were investigated by single crystal X‐ray crystallography under cryogenic condition. Both structures consist of stacks of face‐to‐face cyclodextrin dimers arranged in brickwork‐like pattern along the crystallographic a‐axis. For complex 1 , each of the two dimeric β‐cyclodextrins includes one 7‐hydroxycoumarin molecule that penetrates deeply into the cyclodextrin dimer and locates its lactonering at the center of the dimer cavity. For complex 2 , each cyclodextrin dimer accommodates three 4‐hydroxycoumarin molecules. One of them is sandwiched between two units of the cyclodextrin dimer, the other two are shallowly included in the cavities of the dimeric cyclodextrins respectively and protrude their lactone rings from the primary end of the cyclodextrin. The substituent effects of guest molecules on inclusion geometry of various coumarin molecules in β‐cyclodextrin were examined.     

Inhibition of acid‐induced decomposition of diphenyltriazenes by complexation with cyclodextrins

Acid‐promoted N? N bond cleavage in 1,3‐diphenyltriazenes (X‐Ph‐N=N‐NH‐Ph‐X; X = H, 4‐OCH₃), leading to formation of diazonium ions and anilines, is strongly inhibited in aqueous solutions in the presence of cyclodextrins (CDs). The inhibition is ascribed to the formation of inclusion complexes that render the guest diphenyltriazene significantly less basic as a result of the less polar nature of the CD cavity (a microsolvent effect). Association equilibrium constants for 1:1 host–guest complexes increase in the order α‐CD <β‐CD ～ permethyl‐β‐CD < hydroxypropyl‐β‐CD, with values for X = 4‐OCH₃ being larger than those for X = H. In the case of α‐CD, formation of 2:1 host–guest complexes is also involved. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 567–574, 2010     

Theoretical study of spectroscopic properties of insulated molecular wires formed by substituted oligothiophenes and cross‐linked α‐cyclodextrin

The inclusion compound formed between cross‐linked α‐cyclodextrin dimer and substituted oligothiophene, was investigated using density functional theory (DFT). Energy gap, spectroscopy (IR, UV–vis, ¹³C NMR, and ¹H NMR) and first hyperpolarizability data were analyzed for the free species and inclusion compound, pp‐PT@(αCD–αCD). The semiconducting property of the included pp‐PT was not substantially affected on inclusion, with the energy gap increasing by only 10% after interaction with αCD–αCD. On the other hand, the nonlinear optical (NLO) response was significantly decreased, with the first hyperpolarizability, β, predicted to be just more than 60% lower for the [2]rotaxane than for free pp‐PT, but still having considerable magnitude. This was explained by the two‐state model based on the charge‐transfer contribution to the electronic transitions. The sensitivity of electronic spectra might also be useful for the inclusion complex characterization. The IR spectrum was slightly sensitive to the host–guest interaction and the calculated ¹³C NMR and ¹H NMR chemical shifts for the pp‐PT guest showed appreciable variations of 5–10 and 1–1.5 ppm, respectively, and so can be used for the characterization of inclusion compounds. We concluded that the formation of inclusion complexes with CDs, seems indeed very promising and the use of encapsulating conducting material should be experimentally pursued. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Phosphoryl group differentiating α‐amino acids from β‐ and γ‐amino acids in prebiotic peptide formation

In recent years β‐amino acids have increased their importance enormously in defining secondary structures of β‐peptides. Interest in β‐amino acids raises the question: Why and how did nature choose α‐amino acids for the central role in life? In this article we present experimental results of MS and ³¹P NMR methods on the chemical behavior of N‐phosphorylated α‐alanine, β‐alanine, and γ‐amino butyric acid in different solvents. N‐Phosphoryl α‐alanine can self‐assemble to N‐phosphopeptides either in water or in organic solvents, while no assembly was observed for β‐ or γ‐amino acids. An intramolecular carboxylic–phosphoric mixed anhydride (IMCPA) is the key structure responsible for their chemical behaviors. Relative energies and solvent effects of three isomers of IMCPA derived from α‐alanine (2a–c), with five‐membered ring, and five isomers of IMCPA derived from β‐alanine (4a–e), with six‐membered ring, were calculated with density functional theory at the B3LYP/6‐31G** level. The lower relative energy (3.2 kcal/mol in water) of 2b and lower energy barrier for its formation (16.7 kcal/mol in water) are responsible for the peptide formation from N‐phosphoryl α‐alanine. Both experimental and theoretical studies indicate that the structural difference among α‐, β‐, and γ‐amino acids can be recognized by formation of IMCPA after N‐phosphorylation. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 232–241, 2003     

Fluorescence Sensing and Selective Binding of a Novel 4,4′‐Sulfonyldianiline‐Bridged Bis(β‐cyclodextrin) for Bile Salts

A novel 4,4′‐sulfonyldianiline‐bridged bis(β‐cyclodextrin (CD)) 2 was synthesized, and its complex stability constants (K_s) for the 1 : 1 inclusion complexation with bile salts, i.e., cholate (CA), deoxycholate (DCA), glycocholate (GCA), and taurocholate (TCA) have been determined in phosphate buffer (pH 7.2) at 25° by fluorescence spectroscopy. The result indicated that 2 can act as efficient fluorescent sensor and display remarkable fluorescence enhancement upon addition of optically inert bile salts. Structures of the inclusion complexes between bile salts and 2 were elucidated by 2D‐NMR experiments, indicating that the anionic tail group and the D ring of bile salts penetrate into one CD cavity of 2 from the wide opening deeply, while the phenyl moiety of the CD linker is partially self‐included in the other CD cavity to form a host–linker–guest binding mode. As compared with native β‐CD 1 upon complexation with bile salts, bis(β‐CD) 2 enhances the binding ability and molecular selectivity. Typically, 2 gives the highest K_s value of 26200 M ^?1 for the complexation with CA, which may be ascribed to the simultaneous contributions of hydrophobic, H‐bond, and electrostatic interactions. These phenomena are discussed from the viewpoints of multiple recognition and induce‐fit interactions between host and guest.     

Supramolecular inclusion complexation of polyhedral oligomeric silsesquioxane capped poly(ε‐caprolactone) with α‐cyclodextrin

Supramolecular inclusion complexes (ICs) involving polyhedral oligomeric silsesquioxane (POSS) capped poly(?‐caprolactone) (PCL) and α‐cyclodextrin (α‐CD) were investigated. POSS‐terminated PCLs with various molecular weights were prepared via the ring‐opening polymerization of ?‐caprolactone (CL) with 3‐hydroxypropylheptaphenyl POSS as an initiator. Because of the presence of the bulky silsesquioxane terminal group, the inclusion complexation between α‐CD and the POSS‐capped PCL was carried out only with a single end of a PCL chain threading inside the cavity of α‐CD, which allowed the evaluation of the effect of the POSS terminal groups on the efficiency of the inclusion complexation. The X‐ray diffraction results indicated that the organic–inorganic ICs had a channel‐type crystalline structure. The stoichiometry of the organic–inorganic ICs was quite dependent on the molecular weights of the POSS‐capped PCLs. With moderate molecular weights of the POSS‐capped PCLs (e.g., M_n =3860 or 9880), the stoichiometry was 1:1 mol/mol (CL unit/α‐CD), which was close to the literature value based on the inclusion complexation of α‐CD with normal linear PCL chains with comparable molecular weights. When the PCL chains were shorter (e.g., for the POSS‐capped PCL of M_n = 1720 or 2490), the efficiency of the inclusion complexation decreased. The decreased efficiency of the inclusion complexation could be attributed to the lower mobility of the bulky POSS group, which restricted the motion of the PCL chain attached to the silsesquioxane cage. This effect was pronounced with the decreasing length of the PCL chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1247–1259, 2007     

1,1′‐Dimethylvanadocene α‐amino acid complexes: synthesis,characterization and antimicrobial behavior toward Escherichia coli B

Eight water‐soluble 1,1′‐dimethylvanadocene amino acid complexes have been prepared via the reaction of (MeCp)₂VCl₂ ( 2 ) with one equivalent of amino acid (aa) in water affording [(MeCp)₂V( aa )]Cl, where aa is glycine ( 3 ), L ‐alanine ( 4 ), L ‐valine ( 5 ), L ‐leucine ( 6 ), L ‐isoleucine ( 7 ), L ‐phenylalanine ( 8 ), L ‐histidine ( 9 ) and L ‐tryptophane ( 10 ). All prepared complexes have been characterized by EPR, IR and Raman spectroscopy, elemental analysis and mass spectrometry. Molecular structures of [(MeCp)₂V(ala)]BPh₄·CH₃OH ( 11 ), [(MeCp)₂V(leu)]PF₆ ( 12 ) and [(MeCp)₂V(ile)]PF₆ ( 13 ) were determined by X‐ray diffraction analysis. Cytotoxic properties of complexes 2–10 were investigated toward Escherichia coli B and compared with analogical unsubstituted vanadocene compounds ( 1, 14–21 ). The results showed that 1,1′‐dimethylvanadocene amino acid complexes have identical or slightly higher antiproliferative activity then their unsubstituted analogs. Copyright © 2006 John Wiley & Sons, Ltd.     

Inclusion complexes of α‐cyclodextrin and (AB)n block copolymers

Cyclodextrins thread onto polymer chains to form inclusion complexes, especially when the polymer is hydrophobic relative to the solvent. Selective threading might occur when the polymer architecture contains both hydrophobic and hydrophilic segments. α‐Cyclodextrin formed crystalline inclusion complexes with (AB)_n microblock copolymers, where the A block was a linear alkyl segment containing a single double bond and the B block was an exact length segment of poly(ethylene oxide). The complexes were isolated and characterized by solution and solid‐state NMR, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. Each method confirmed complex formation and showed that the physical properties of the complexes were distinct from those of its individual components. The X‐ray data were consistent with known inclusion complexes having a channel or column crystal structure. The stoichiometry of the complex formation, 2.3 α‐cyclodextrin rings per polymer repeat unit, was determined by NMR analysis of the complexes and from an analysis of the inclusion complex yields. The data suggest that the inclusion complex stoichiometry is defined by the increasing insolubility of the polymer–cyclodextrin complex. Solid‐state NMR data were consistent with a preference for threading onto hydrophobic segments of the (AB)_n polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2731–2739, 2001     

Synthesis and Characterization of β‐CD‐Coated Polystyrene Microspheres by γ‐Ray Radiation Emulsion Polymerization

Polystyrene (PS) microspheres coated with β‐cyclodextrin (β‐CD) were fabricated via γ‐ray‐induced emulsion polymerization in a ternary system of styrene/β‐CD/water (St/β‐CD/water). The solid inclusion complex of St and β‐CD particles formed at the St droplets–water interface can stabilize the emulsion as the surfactant. TEM and XPS results showed that β‐CD remains on the surface of PS particles. The average size of the PS particles increases from 186 to 294 nm as the weight ratio of β‐CD to St rises from 5% to 12.5%. The water contact angle (CA) of PS latex film is lower than 90°, and reduces with the β‐CD content even to 36°. Thus, this work provides a new and one‐pot strategy to surface hydrophilic modification on hydrophobic polymer particles with cyclodextrins through radiation emulsion polymerization.