BF2 complex of fluorinated dipyrrolyldiketone: a new class of efficient receptor for acetate anions

The beta-fluorinated derivative (2b) of the 1,3-dipyrrolyl-1,3-propanedione BF2 complex has been prepared from 3,4-difluoropyrrole and malonyl chloride, followed by treatment with BF3.OEt2. Despite the simple, acyclic, and neutral structure, 2b exhibits efficient 1:1 binding for anions in CH2Cl2 using the bridging CH and pyrrole NH as interaction sites. The binding constant (Ka) of 2b for acetate (CH3CO(2-)), associating more effectively than anions such as F-, Cl-, Br-, H2PO(4-), and HSO(4-), is estimated to be 9.6 x 10(5) M(-1), approximately 9 times larger than that of the beta-H derivative 2a (1.1 x 10(5) M(-1)). The UV-vis and fluorescence spectral changes of 2b elucidate the effective recognition of an amino acid, such as phenylalanine, in the anionic form; this is also supported by CD spectral changes with mirror images by L- and D-isomers. Furthermore, in the solid state, BF2 complex 2b provides Cl- -bridged supramolecular networks and, in sharp contrast, deprotonated "anionic" self-assembled structures by F- binding.     

Inorganic Bergman Cyclization: An Appeal From Theory

The scope of Bergman cyclization is expanded computationally by exploring the cyclization in inorganic B, N substituted derivative. This substitution has introduced polarity into the transition state, which resulted in dramatic lowering of the activation barrier. Natural charge distribution throughout the reaction profile has ascertained this hypothesis. Single B and N atom substitution at 1 and 6 terminal positions lowers the activation barrier by almost half of the original value which becomes even lower in the complete B, N analogue. The parent Bergman and single B, N substituted products were characterized by significant biradical character while the complete B, N substituted analogue was characterized by significant zwitterionic character. Reduction in electron delocalization is also observed in the complete B, N substituted analogue.     

Synthesis, structural characterization and luminescent properties of a series of Cu(I) complexes based on polyphosphine ligands

A series of Cu(I) complexes with a [Cu(NN)(PP)](+) moiety, [Cu(phen)(pba)](BF(4)) (1a), [Cu(2)(phen)(2)(pbaa)](BF(4))(2) (2a), [Cu(2)(phen)(2)(pnaa)](BF(4))(2) (3a), [Cu(2)(phen)(2)(pbbaa)](BF(4))(2) (4a), [Cu(dmp)(pba)](BF(4)) (1b), [Cu(2)(dmp)(2)(pbaa)](BF(4))(2) (2b), [Cu(2)(dmp)(2)(pnaa)](BF(4))(2) (3b) and [Cu(2)(dmp)(2)(pbbaa)](BF(4))(2) (4b) (phen = 1,10-phenanthroline, dmp = 2,9-dimethyl-1,10-phenanthroline, pba = N,N-bis((diphenylphosphino)methyl)benzenamine, pbaa = N,N,N',N'-tetrakis((diphenylphosphino)methyl)benzene-1,4-diamine, pnaa = N,N,N',N'-tetrakis((diphenylphosphino)methyl)naphthalene-1,5-diamine and pbbaa = N,N,N',N'-tetrakis((diphenylphosphino)methyl)biphenyl-4,4'-diamine), were rationally designed and synthesized. These complexes were characterized by (1)H and (31)P NMR, electrospray mass spectrometry, elemental analysis and X-ray crystal structure analysis. Introduction of different central arene spacers (phenyl, naphthyl, biphenyl) into ligands, resulting in the size variation of these complexes, aims to tune the photophysical properties of the complexes. Each Cu(I) ion in these complexes adopts a distorted tetrahedral geometry constructed by the chelating diimine and phosphine groups. Intermolecular C-H···π and/or π···π interactions are involved in the solid states. The dmp-containing complex exhibits better emission relative to the corresponding phen complex due to the steric encumbrance of bulky alkyl groups. Furthermore, for complexes with identical diimine but different phosphine ligands, the tendency of increased emission lifetime as well as blue-shifted emission in the solid state follows with the decrease in size of complexes. Intermolecular C-H···π interactions have an influence on the final solid state photophysical properties through vibrationally relaxed non-radiative energy transfer in the excited state. Smaller-sized complexes show better photophysical properties due to less vibrationally relaxed behavior related to flexible C-H···π bonds. Nevertheless, the tendency for increased quantum yield and emission lifetime, as well as blue-shifted emission in dilute solution goes with the increase in size of complexes. The central arene ring (phenyl, naphthyl or biphenyl) has an influence on the final photophysical properties. The larger the π-conjugated extension of central arene ring is, the better the photophysical properties of complex are. The rigid and large-sized complex 3b, with a high quantum yield and long lifetime, is the best luminophore among these complexes.     

Diastereoselective addition of gamma-substituted allylic nucleophiles to ketones: highly stereoselective synthesis of tertiary homoallylic alcohols using an allylic tributylstannane/stannous chloride system

The diastereoselective addition of gamma-substituted allylic nucleophiles to ketones has been accomplished to give tertiary homoallylic alcohols. The reaction of tributylcinnamyltin 1a with simple ketones 2 in the presence of stannous chloride (SnCl(2)) gave the tertiary homoallylic alcohols 3, which include the anti form (based on Ph and OH), with high diastereoselectivity. In the reaction course, transmetalation of tributylcinnamyltin 1a with SnCl(2) proceeds to form an active nucleophile which is tentatively considered to be a cinnamyltin(II) species. A cyclic transition state A is favorable because the chlorinated tin(II) center is highly capable of accepting ligands. The other diastereomers (syn form) 4 were obtained in the reaction of tributylcinnamyltin 1a with ketones 2 by the use of BF(3) x OEt(2) instead of SnCl(2). This reaction proceeds through an acyclic transition state in which BF(3) acts as a Lewis acid for activation of ketones. When 3-tributylstannylcyclohexene 1b or 3-tributylstannylcyclopentene 1c was used with SnCl(2), high diastereoselective formation of the corresponding homoallylic alcohols 6 which have the syn form (based on ring chain and OH) was observed. The selectivity was also explained by the cyclic transition state B. When tributylcrotyltin 1d or 1e was used, the stereochemistry of the products depends on the additives (SnCl(2) or BF(3) x OEt(2)), substituents of ketones, and reaction temperature. It is interesting that those additives compensate for each other in terms of diastereoselective alkylation. The alkylation of alpha-alkoxy, aryloxy, or hydroxyketones 16 was achieved in extremely high selectivity using an allylic tributyltin 1a-c/SnCl(2) system. The chelation by carbonyl and beta-oxygens provides a rigid transition state (E or F) for selective reactions. It is noted that the hydroxyketone can be used without protection in this reaction system. The relative stereochemistry of the produced tertiary homoallylic alcohols was determined on the basis of X-ray analyses.     

Stereochemistry of cyclopropane formation involving group IV organometallic complexes

The reaction of (Z)-HDC=CHCH(OCH(3))C(6)H(5) (1) with Cp(2)Zr(D)Cl followed by BF(3).OEt(2) gave phenylcyclopropanes 3a and 3b, both having cis deuterium. This stereochemical outcome requires inversion of configuration at the carbon bound to zirconium and is consistent with a "W-shaped" transition state structure for cyclopropane formation. In a Kulinkovich hydroxycyclopropanation, trans-3-deutero-1-methyl-cis-2-phenyl-1-cyclopropanol (5) was formed stereospecifically from Ti(O-i-Pr)(4), ethyl acetate, EtMgBr, and trans-beta-deuterostyrene. This stereochemistry requires retention of configuration at the carbon bound to titanium and is consistent with frontside attack of the carbon-titanium bond on a carbonyl group coordinated to titanium. In a de Meijere cyclopropylamine synthesis, a 3:1 mixture of N,N-dimethyl-N-(trans-3-deutero-trans-2-phenylcyclopropyl)amine (6a) and N,N-dimethyl-N-(cis-3-deutero-cis-2-phenylcyclopropyl)amine (6b) was formed from Ti(O-i-Pr)(4), DMF, Grignard reagents, and trans-beta-deuterostyrene. This stereochemistry requires inversion of configuration at the carbon bound to titanium and is consistent with a W-shaped transition structure for ring closure.     

Die 2,6,-Diisopropyl-phenylgruppe als sperriger Substituent in Bor-Stickstoff-Verbindungen

The 2,6-Diisopropyl-phenyl Group as a Bulky Substituent in Boron-Nitrogen Compounds 2,6-Diisopropylaniline (RNH₂), the monosilylated derivative (RNH? SiMe₃) and its lithium salt (RNLiSiMe₃) have been reacted with F₃B · OEt₂ by variation of the reaction conditions. Products as RNH? BF? NR? BF? NHR, 1 , RNH? BF? NHR, 3 , Me₃SiNR? BF₂, 4 , and (Me₃SiNR)₂BF, 5 are thus obtained. Substitution of fluorine atoms in 4 by lithium organyls (R′Li) leads to aminoboranes of the type Me₃SiNR? B(F)R′ (R′ = Me, CMe₃, C₆H₅, NHR, N(SiMe₃Si)₂N), 7a–7e . Thermolysis of 7b gives the diazadiboretidine (? BCMe₃? NR? )₂, 8 . Attempted preparation of the corresponding amino-iminoborane by elimination of Me₃SiF and HF from 5 or Me₃SiNR? BF? NHR, 7d , yielded the benzoannelated heterocycle 6 and the 1,3-diaza-2-sila-4-bore-tidine 9 . The compounds are characterized by analyses and their mass and n.m.r. (¹H, ¹¹B, ¹³C, ¹⁵N, ¹⁹F, 29Si) spectra.     

Dynamic behaviour of Ru and Ru-Pt complexes containing tetrahedro-P4 ligand

Dynamic processes involving the P(4) cage coordinated to transition metal fragments were observed for the mononuclear complex trans-[Ru(dppm)(2)(H)(η(1)-P(4))]BF(4) and for the bimetallic derivative trans-[Ru(dppm)(2)(H)(μ ,η(1:2)-P(4)){Pt(PPh(3))(2)}]BF(4) as demonstrated by NMR experiments and DFT calculations.     

Synthesis and properties of terthiophene and bithiophene derivatives functionalized by BF2 chelation: a new type of electron acceptor based on quadrupolar structures

Terthiophene and bithiophene derivatives functionalized by BF(2) chelation were synthesized as a new type of electron acceptor, and their properties were compared to those of bifuran and biphenyl derivatives. These new compounds are characterized by quadrupolar structures due to resonance contributors generated by BF(2) chelation. The bithiophene derivative has a strong quadrupolar character compared with the bifuran and biphenyl derivatives because their hydrolytic analyses indicated that the bithiophene moiety has a larger on-site Coulomb repulsion than the others. The terthiophene derivative has a smaller on-site Coulomb repulsion than the bithiophene derivative due to the addition of a thiophene spacer. These BF(2) complexes exhibit long-wavelength absorptions and according to measurements of ionization potentials and absorption edges they have energetically low-lying HOMOs and LUMOs. The crystal structure of the bithiophene derivative is of the herringbone type, with short F···S and F···C contacts affording dense crystal packing. n-Type semiconducting behaviour was observed in organic field-effect transistors based on these BF(2) complexes.     

Transition-state structure of human 5'-methylthioadenosine phosphorylase

Kinetic isotope effects (KIEs) and computer modeling using density functional theory were used to approximate the transition state of human 5'-methylthioadenosine phosphorylase (MTAP). KIEs were measured on the arsenolysis of 5'-methylthioadenosine (MTA) catalyzed by MTAP and were corrected for the forward commitment to catalysis. Intrinsic KIEs were obtained for [1'-(3)H], [1'-(14)C], [2'-(3)H], [4'-(3)H], [5'-(3)H(2)], [9-(15)N], and [Me-(3)H(3)] MTAs. The primary intrinsic KIEs (1'-(14)C and 9-(15)N) suggest that MTAP has a dissociative S(N)1 transition state with its cationic center at the anomeric carbon and insignificant bond order to the leaving group. The 9-(15)N intrinsic KIE of 1.039 also establishes an anionic character for the adenine leaving group, whereas the alpha-primary 1'-(14)C KIE of 1.031 indicates significant nucleophilic participation at the transition state. Computational matching of the calculated EIEs to the intrinsic isotope effects places the oxygen nucleophile 2.0 Angstrom from the anomeric carbon. The 4'-(3)H KIE is sensitive to the polarization of the 3'-OH group. Calculations suggest that a 4'-(3)H KIE of 1.047 is consistent with ionization of the 3'-OH group, indicating formation of a zwitterion at the transition state. The transition state has cationic character at the anomeric carbon and is anionic at the 3'-OH oxygen, with an anionic leaving group. The isotope effects predicted a 3'-endo conformation for the ribosyl zwitterion, corresponding to a H1'-C1'-C2'-H2' torsional angle of 33 degrees. The [Me-(3)H(3)] and [5'-(3)H(2)] KIEs arise predominantly from the negative hyperconjugation of the lone pairs of sulfur with the sigma (C-H) antibonding orbitals. Human MTAP is characterized by a late S(N)1 transition state with significant participation of the phosphate nucleophile.     

Kinetic evidence for remote pi-aryl participation in the BF3-catalyzed rearrangement of [2 + 2] photocycloadducts of diarylhomobenzoquinones with diphenylacetylene

[reaction: see text] The BF(3)-catalyzed rearrangement of cyclobutene-fused m- and p-substituted diarylhomobenzoquinones exclusively gave the keto-alcohols via a Wagner-Meerwein vinyl-anion migration followed by the annulation of a delta-located endo-aryl group. The Hammett treatments for the endo/exo substituent effects, as well as the kinetic solvent effects, indicated that this reaction proceeds through the concerted S(N)2-like mechanism involving a rate-determining endo-aryl-assisted transition state.     

氮化锇配合物离子[OsN(mnt)2]-的电子结构和光谱性质的理论研究

理论研究了离子型配合物[OsN(mnt)2]-[mnt=S2C2(CN)2)]的电子结构和光谱性质, 考察不同配体三价N、二硫氰烯S2C2(CN)2和金属Os的相互作用对光化学性质的影响. 分别在B3LYP/LANL2DZ和CIS/LANL2DZ水平上优化了配合物的基态和激发态结构. 与基态(1A1)相比, 激发态(3A2)的Os≡N 的键长缩短了0.0066 nm, 这与计算得到的频率增大一致, 使用TD-DFT方法计算得到了配合物的吸收和发射光谱. 计算得到的位于300 nm(f=0.1497)和262 nm(f=0.2890)的强吸收都来自1A1→1B1跃迁, 分别指认为SC→Os≡N+CN 和N+SC→Os≡N+CN的电子跃迁. 最低能量的吸收位于446 nm(f=0.0206) 处, 来自1A1→1B2的电子跃迁, 指认为N→Os和 N+SC→CN. 计算得到配合物在气态的磷光发射位于678 nm(A3A2→X1A1)处, 而在丙酮溶液中则蓝移到了625 nm处, 跃迁属性不变, 都是N→Os和S→Os的跃迁.     

Lewis acid mediated [2,3]-sigmatropic rearrangement of allylic alpha-amino amides

Boron trifluoride and BBr(3) mediated [2,3]-sigmatropic rearrangements of allylic alpha-amino amides have been developed affording secondary amines in good yields. (E)-Crotyl and (E)-cinnamyl alpha-amino amides 2b and 2c exhibit excellent syn-diastereoselectivity upon rearrangement with either Lewis acid. The allylic amine 2a forms upon treatment with BF(3) or BBr(3) a five-membered heterocylic complex in which a single halide anion has been displaced by the carbonyl oxygen atom. The structures of the Lewis acid-amine complexes were elucidated using NMR spectroscopy. A plausible reaction mechanism, based on DFT calculations, is presented. Thus, BF(3)- or BBr(3)-complexed allylic amines 2 are shown to preferentially proceed, after deprotonation, via an endo transition state.     

Study of aromatic nucleophilic substitution with amines on nitrothiophenes in room-temperature ionic liquids: are the different effects on the behavior of para-like and ortho-like isomers on going from conventional solvents to room-temperature ionic liquids related to solvation effects?

The kinetics of the nucleophilic aromatic substitution of some 2-L-5-nitrothiophenes (para-like isomers) with three different amines (pyrrolidine, piperidine, and morpholine) were studied in three room-temperature ionic liquids ([bmim][BF4], [bmim][PF6], and [bm(2)im][BF4], where bmim = 1-butyl-3-methylimidazolium and bm(2)im = 1-butyl-2,3-dimethylimidazolium). To calculate thermodynamic parameters, a useful instrument to gain information concerning reagent-solvent interactions, the reaction was carried out over the temperature range 293-313 K. The reaction occurs faster in ionic liquids than in conventional solvents (methanol, benzene), a dependence of rate constants on amine concentration similar to that observed in methanol, suggesting a parallel behavior. The above reaction also was studied with 2-bromo-3-nitrothiophene, an ortho-like derivative able to give peculiar intramolecular interactions in the transition state, which are strongly affected by the reaction medium.     

A theoretical study of the uncatalyzed and BF3-assisted Baeyer-Villiger reactions

The mechanisms for the uncatalyzed and boron trifluoride (BF3) assisted Baeyer-Villiger reactions between acetone and hydrogen peroxide have been investigated using high level ab initio [MP2 and CCSD(T)] and density functional theory (B3LYP) methods. Both steps in the uncatalyzed reaction are found to have very high transition state energies. It is clear that detectable amounts of the Crieege intermediate or the products cannot be formed without the aid of a catalyst. The main function of BF3 in both the addition step and the rearrangement (migration) step is to facilitate proton transfer. In the addition step the complexation of hydrogen peroxide with BF3 leads to an increased acidity of the attacking OH group, while in the rearrangement step BF3 takes active part in the proton-transfer process. This latter step is found to be rate determining with an activation free energy of 17.7 kcal/mol in organic solution. The products of the reaction are BF2OH, hydrogen fluoride, and methyl acetate. Thus, BF3 is not directly regenerated from the reaction.     

Synthetic and structural investigations of monomeric dilithium boraamidinates and bidentate NBNCN ligands with bulky N-bonded groups

The dilithiated boraamidinate complexes [Li(2)[PhB(NDipp)(2)](THF)(3)] (7a) (Dipp = 2,6-diisopropylphenyl) and [Li(2)[PhB(NDipp)(N(t)Bu)](OEt(2))(2)] (7b), prepared by reaction of PhB[N(H)Dipp][N(H)R'] (6a, R' = Dipp; 6b, R' = (t)Bu) with 2 equiv of (n)BuLi, are shown by X-ray crystallography to have monomeric structures with two terminal and one bridging THF ligands (7a) or two terminal OEt(2) ligands (7b). The derivative 7a is used to prepare the spirocyclic group 13 derivative [Li(OEt(2))(4)][In[PhB(NDipp)(2)](2)] (8a) that is shown by an X-ray structural analysis to be a solvent-separated ion pair. The monoamino derivative PhBCl[N(H)Dipp] (9a), obtained by the reaction of PhBCl(2) with 2 equiv of DippNH(2), serves as a precursor for the synthesis of the four-membered BNCN ring [[R'N(H)](Ph)B(mu-N(t)Bu)(2)C(n)Bu] (10a, R' = Dipp). The X-ray structures of 6a, 9a, and 10a have been determined. The related derivative 10b (R' = (t)Bu) was synthesized by the reaction of [Cl(Ph)B(mu-N(t)Bu)(2)C(n)Bu] with Li[N(H)(t)Bu] and characterized by (1)H, (11)B, and (13)C NMR spectra. In contrast to 10a and 10b, NMR spectroscopic data indicate that the derivatives [[DippN(H)](Ph)B(NR')(2)CR(NR')] (11a: R =( t)Bu, R' = Cy; 11b: R = (n)Bu, R' = Dipp) adopt acyclic structures with three-coordinate boron atoms. Monolithiation of 10a produces the novel hybrid boraamidinate/amidinate (bamam) ligand [Li[DippN]PhB(N(t)Bu)C(n)Bu(N(t)Bu)] (12a).     

A ruthenium nitrosyl that rapidly delivers NO to proteins in aqueous solution upon short exposure to UV light

Two Ru(III) complexes, [Ru(PaPy(3))(Cl)](BF(4)) (2) and [Ru(PaPy(3))(NO)](BF(4))(2) (3) (PaPy(3)H = N,N'-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide), have been synthesized and characterized by spectroscopy and X-ray diffraction. Nitrosyl complex 3 has been prepared by passage of purified NO gas to the hot methanolic solution of the chloro derivative 2. Complex 3 exhibits nu(NuOmicron) stretching frequency at 1899 cm(-)(1) indicating a [Ru-NO](6) configuration. Clean (1)H NMR spectra of 3 in D(2)O and CD(3)CN confirm the S = 0 ground state. When an aqueous solution of [Ru(PaPy(3))(NO)](BF(4))(2) is exposed to low intensity UV light, it rapidly loses NO and forms [Ru(PaPy(3))(H(2)O)](2+). This reaction can be conveniently used to transfer NO to proteins such as myoglobin (Mb) and cytochrome c oxidase. The NO transfer reaction is clean and occurs upon short exposure to light.     

Reversible skeletal substitution reactions involving group 13 heterophosphazenes

The cyclic boratophosphazene, N(PCl2NMe)2BCl2 1, reacts with two equivalents of AlMe3 to give the aluminatophosphazene heterocycle, N(PCl2NMe)2AlClMe 4. The unprecedented reverse skeletal substitution (Al for B) was accomplished by treating 4 with Ag[BF4] to form the fluorinated boratophosphazene N(PCl2NMe)2BF2 5.     

Preparation and reactivity of penta- and tetracoordinate platinum(II) hydride complexes with P(OEt)3 and PPh(OEt)2 phosphite ligands

The pentacoordinate [PtH{P(OEt)3}4]BF4 (1) hydride complex was prepared by allowing the tetrakis(phosphite) Pt{P(OEt)3}4 to react with HBF4.Et2O at -80 degrees C. Depending on the nature of the acid used, however, the protonation of the related Pt{PPh(OEt)2}4 complex yielded the pentacoordinate [PtH{PPh(OEt)2}4]BF4 (3) or the tetracoordinate [PtH{PPh(OEt)2}3]Y (4) [Y = BF4- (a), CF3SO3- (b), Cl- (c)] derivatives. Neutral PtHClP2 (7,8) [P = P(OEt)3, PPh(OEt)2] hydride complexes were prepared by allowing PtCl2P2 to react with NaBH4 in CH3CN. The tetrakis(phosphite)[Pt{P(OEt)3}4](BF4)2 (2) derivative was also synthesised and then characterised spectroscopically and by an X-ray crystal structure determination. Reactivity with aryldiazonium cations of all the hydrides was investigated and found to proceed only with the PtHClP2 complex to yield the aryldiazene [PtCl(ArN=NH)P2]BF4[P = PPh(OEt)2] derivative. The hydrazine [PtCl(NH2NH2){PPh(OEt)2}2]BPh4 complex was also prepared by allowing PtHClP2 to react first with AgCF3SO3 and then with hydrazine.     

Bidentates versus monodentates in asymmetric hydrogenation catalysis: synergic effects on rate and allosteric effects on enantioselectivity

C 1-Symmetric phosphino/phosphonite ligands are prepared by the reactions of Ph 2P(CH 2) 2P(NMe 2) 2 with ( S)-1,1'-bi-2-naphthol (to give L A ) or ( S)-10,10'-bi-9-phenanthrol (to give L B ). Racemic 10,10'-bi-9-phenanthrol is synthesized in three steps from phenanthrene in 44% overall yield. The complexes [PdCl 2( L A,B )] ( 1a, b), [PtCl 2( L A,B )] ( 2a, b), [Rh(cod)( L A,B )]BF 4 ( 3a, b) and [Rh( L A,B ) 2]BF 4 ( 4a, b) are reported and the crystal structure of 1a has been determined. A (31)P NMR study shows that M, a 1:1 mixture of the monodentates, PMePh 2 and methyl monophosphonite L 1a (based on ( S)-1,1 '-bi-2-naphthol), reacts with 1 equiv of [Rh(cod) 2]BF 4 to give the heteroligand complex [Rh(cod)(PMePh 2)( L 1a )]BF 4 ( 5) and homoligand complexes [Rh(cod)(PMePh 2) 2]BF 4 ( 6) and [Rh(cod)( L 1a ) 2]BF 4 ( 7) in the ratio 2:1:1. The same mixture of 5- 7 is obtained upon mixing the isolated homoligand complexes 6 and 7 although the equilibrium is only established rapidly in the presence of an excess of PMePh 2. The predominant species 5 is a monodentate ligand complex analogue of the chelate 3a. When the mixture of 5- 7 is exposed to 5 atm H 2 for 1 h (the conditions used for catalyst preactivation in the asymmetric hydrogenation studies), the products are identified as the solvento species [Rh(PMePh 2)( L 1a )(S) 2]BF 4 ( 5'), [Rh(S) 2(PMePh 2) 2]BF 4 ( 6') and [Rh(S) 2( L 1a ) 2]BF 4 ( 7') and are formed in the same 2:1:1 ratio. The reaction of M with 0.5 equiv of [Rh(cod) 2]BF 4 gives exclusively the heteroligand complex cis-[Rh(PMePh 2) 2( L 1a ) 2]BF 4 ( 8), an analogue of 4a. The asymmetric hydrogenation of dehydroamino acid derivatives catalyzed by 3a, b is reported, and the enantioselectivities are compared with those obtained with (a) chelate catalysts derived from analogous diphosphonite ligands L 2a and L 2b , (b) catalysts based on methyl monophosphonites L 1a and L 1b , and (c) catalysts derived from mixture M. For the cinnamate and acrylate substrates studied, the catalysts derived from the phosphino/phosphonite bidentates L A,B generally give superior enantioselectivities to the analogous diphosphonites L 2a and L 2b ; these results are rationalized in terms of delta/lambda-chelate conformations and allosteric effects of the substrates. The rate of hydrogenation of acrylate substrate A with heterochelate 3a is significantly faster than with the homochelate analogues [Rh( L 2a )(cod)]BF 4 and [Rh(dppe)(cod)]BF 4. A synergic effect on the rate is also observed with the monodentate analogues: the rate of hydrogenation with the mixture containing predominantly heteroligand complex 5 is faster than with the monophosphine complex 6 or monophosphonite complex 7. Thus the hydrogenation catalysis carried out with M and [Rh(cod) 2]BF 4 is controlled by the dominant and most efficient heteroligand complex 5. In this study, the heterodiphos chelate 3a is shown to be more efficient and gives the opposite sense of optical induction to the heteromonophos analogue 5.     

Mixed dinitrogen-organocyanamide complexes of molybdenum(0) and their protic conversion into hydrazide and amidoazavinylidene derivatives

Organocyanamides, Ntbd1;CNR(2) (R = Me or Et), react with trans-[Mo(N(2))(2)(dppe)(2)] (1, dppe = Ph(2)PCH(2)CH(2)PPh(2)), in THF, to give the first mixed molybdenum dinitrogen-cyanamide complexes trans-[Mo(N(2))(NCNR(2))(dppe)(2)] (R = Me 2a or Et 2b) which are selectively protonated at N(2) by HBF(4) to yield the hydrazide(2-) complexes trans-[Mo(NNH(2))(NCNR(2))(dppe)(2)][BF(4)](2) (R = Me, 3a, or Et, 3b). On treatment with Ag[BF(4)], oxidation and metal fluorination occur, and the ligating cyanamide undergoes an unprecedented beta-protonation at the unsaturated C atom to form trans-[MoF(NCHNR(2))(dppe)(2)][BF(4)](2) (R = Me, 4a, or Et, 4b) compounds which present the novel amidoazavinylidene (or amidomethyleneamide) ligands. Complexes 4 are also formed from the corresponding compounds 3, with liberation of ammonia and hydrazine. The crystal structure of 2b was determined by single-crystal X-ray diffraction analysis which indicates that the N atom of the amide group has a trigonal planar geometry.