Tertiary amine-mediated synthesis of microporous carbon membranes

Microporous carbon membranes were prepared on an -alumina support by a pyrolysis of cationic tertiary amine/anionic polymer composites. The precursor solutions contain a thermosetting resorcinol/formaldehyde (RF) polymer and a cationic tertiary amine. Three types of cationic tertiary amines with different chain lengths were used, such as tetramethlammonium bromide (TMAB), tetrapropylammonium bromide (TPAB) and cetyltrimethylammonium bromide (CTAB). A porous structure was produced by a decomposition of the amine and the resulting pores assisted the further gasification of the RF polymer at high temperature. The carbon/alumina membranes have thin and continuous carbon top layers with a thickness of 1 μm. Gas permeation tests were performed using single gases of CO₂, O₂, N₂, CF₄, n-C₄H₁₀ and i-C₄H₁₀, as well as binary mixtures of CH₄/n-C₄H₁₀ and N₂/CF₄ at different temperatures between 23 and 150 °C. The carbon membrane prepared using TMAB showed separation factors higher than 650 for the CH₄/n-C₄H₁₀ mixtures and higher than 8100 for the N₂/CF₄ mixture. From the permeation of pure gases with different molecular sizes, the pore sizes of the carbon membrane prepared using TMAB, TPAB and CTAB are estimated to be 4.0, 5.0 and larger than 5.5 Å, respectively, indicating that the micropore size of the carbon membranes is controllable by using different amines.     

Rate coefficients for the reactions of cyclohexadienyl (c-C6H7) radicals with O2 and NO at room temperature

Rate coefficients for the reactions of cyclohexadienyl (c-C₆H₇) radicals with O₂ and NO were measured at 296 ± 2 K. The c-C₆H₇ radicals were detected selectively by laser-induced fluorescence. The rate coefficient for the reaction of c-C₆H₇ with O₂, (4.4 ± 0.5) × 10⁻¹⁴ cm³ molecule⁻¹ s⁻¹, was independent of the bath-gas (He) pressure (13–80 Torr). In the reaction of c-C₆H₇ with NO, thermal equilibrium among c-C₆H₇, NO, and C₆H₇NO was observed. The forward and reverse reactions were in the falloff region, and the equilibrium constant was (1.5 ± 0.6) × 10⁻¹⁵ cm³ molecule⁻¹.     

Lubrication of the mixed system of Triton X-100/n-C10H21OH/H2O lamellar liquid crystal and ZnS nanoparticles

ZnS nanoparticles could be synthesized, when two kinds of Triton X-100/n-C₁₀H₂₁OH/H₂O lamellar liquid crystal were mixed, in which Zn(CH₃COO)₂ and Na₂S were dissolved in the solvent layer, respectively. The size of ZnS nanoparticles was about 10 nm and limited by the thickness of the solvent layer of the lamellar liquid crystal. The lubrication properties of the mixed system of Triton X-100/n-C₁₀H₂₁OH/H₂O lamellar liquid crystal and ZnS nanoparticles were determined. The results showed that the presence of ZnS nanoparticles could improve the anti-wear ability of the Triton X-100/n-C₁₀H₂₁OH/H₂O lamellar liquid crystal and decrease its friction coefficient.     

Velocity map imaging of the photolysis of n-C4H9Br in UV region

Using velocity map ion imaging technique, the photodissociation of n-C₄H₉Br in the wavelength range 231–267 nm was studied. The results and our ab initio calculations indicated that the absorption of n-C₄H₉Br in the investigated region originated from the excitations to the lowest three repulsive states, as assigned as 1A″, 2A′ and 3A′ in C_s symmetry. Dissociations occurred on the PES surfaces of the three states, terminating in C₄H₉+Br (²P_3/2) or C₄H₉ + Br^* (²P_1/2) as two channels, and being impacted by an avoided crossing between the PES surfaces of the 2A′ and 3A′ states. The transition dipole to the 1A″ state was perpendicular to the symmetry plane, so perpendicular to the C–Br bond. The transitions to the 3A′ state was polarized parallel to the symmetry plane, and also parallel to the C–Br bond. While the transition dipole to the 2A′ state was in the symmetry plane, but formed an angle of about 53.1° with the C–Br bond. We have also determined the avoided crossing probabilities, which affected the relative fractions of the individual pathways, for the photolysis of n-C₄H₉Br near 234 nm and 267 nm.     

Structure and stability of closo-BnHn−2(CO)2 (n = 5–12)

Closo-B_nH_n−2(CO)₂ (n = 5–12), isolobal analogues of closo-C₂B_n−2H_n, have been investigated at the B3LYP/6-311+G^**density functional level of theory. The most stable isomers of closo-B_nH_n−2(CO)₂ are similar to those of closo-C₂B_n−2H_n in geometric patterns apart from closo-B₆H₄(CO)₂, and closo-B_nH_n−2(CO)₂ is much less strained than closo-C₂B_n−2H_n. Energetic analysis identifies closo-B₆H₄(CO)₂, closo-B₁₂H₁₀(CO)₂ and closo-B₁₀H₈(CO)₂ to be most stable, of which the latter two cages have been prepared experimentally. On the basis of the negative and rather large nucleus independent chemical shifts (NICS), closo-B_nH_n−2(CO)₂ are aromatic. To aid further experimental study, the CO stretching frequencies have been computed.     

盐封后碳化钼电催化剂的制备及其氢析出性能

Molybdenum carbide is regarded as an excellent substitute for Pt-based catalysts in the hydrogen evolution reaction (HER), owing to its low cost, superior catalytic performance, and long-term stability. In this work, salt-sealed molybdenum carbide was prepared using sodium molybdate and 2, 6-diaminopyridine as the reactive raw materials, followed by continuous salt sealing and calcination of the precursor under an inert atmosphere. The morphology, composition and structure of salt-sealed molybdenum carbide were determined by scanning electron microscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results indicate that salt-sealed molybdenum carbide has irregular morphology and includes nanoparticles and nanorods. A comparison of the TEM images of Mo₂C with salt sealing (Mo₂C/SS) and Mo₂C without salt sealing (Mo₂C) indicates that Mo₂C/SS exhibits a smaller particle size. This suggests that salt sealing can efficiently avoid particle aggregation. The Brunauer-Emmett- Teller (BET) specific surface area of the catalysts was obtained from nitrogen adsorption/desorption isotherms. The increase in BET surface area from 2.55 to 8.14 m²·g⁻¹ after salt sealing provides evidence for the formation of pores in the product. The results of XRD, EDS and XPS analyses show that Mo₂C/SS has an orthorhombic crystal structure with molybdenum oxides on the surface, which may originate from surface oxidation. Considering the results of XPS and the turnover frequency (TOF) calculation, we can conclude that the formation of pores via salt sealing contributes to the exposure of more active sites, while simultaneously enlarging the contact area with oxygen. Therefore, higher molybdenum oxide content is generated on the surface, resulting in a lower proportion of active centers (molybdenum carbides) on the catalyst surface. Furthermore, the pseudocapacitance generated by the faradaic reaction of molybdenum oxides is superimposed on the double-layer capacitance of Mo₂C catalysts, which increases the double layer capacitance. Since the effect of pseudo-capacitance on Mo₂C/SS is more significant, the TOF number declines after salt sealing. Compared with Mo₂C, Mo₂C/SS exhibits three features that promote HER mass activity: (1) the generation of large quantities of pores via salt sealing leads to an increase in the BET surface area and exposure of more active sites, which is beneficial for improving HER performance; (2) the porous structure and enlarged surface area pave the way for effective mass and charge transfer; (3) the decrease of the Tafel slope from 145 to 88 mV·dec⁻¹. In summary, salt-sealed Mo₂C exhibited enhanced HER activity with an overpotential of 175 mV to achieve a current density of 10 mA·cm⁻². The Tafel slope for HER on salt-sealed Mo₂C is 88 mV·dec⁻¹. This can be considered as the proof of the Volmer-Heyrovsky mechanism with electrochemical desorption as the rate-determining step.     

The reaction of cis dioxobis(2,4 pentanedionato)molybdenum (VI) and 2,2′ pyridylbenzoxazole (L), a novel route to β[Mo8O26]

MoO₂(C₅H₇O₂)₂, where C₅H₇O₂ is 2,4-pentanedione (acac), reacts with 2-2′ pyridylbenzoxazole in acetone to give a product with stoichiometry, Mo₃C₂₄H₁₆N₆O₁₂. This product dissolves readily in dimethylformamide to give a brown solution which on standing for several weeks yielded crystals. An X-ray structure determination showed these crystals to contain uncoordinated 2-2′pyridylbenzoxazole and [(CH₃)₂NH₂]₄⁺[Mo₈O₂₆]⁴⁻.     

碳化终温对β-Mo2C催化喹啉加氢脱氮性能影响

以MoO_3为前驱物,CH_4/H_2为碳源,采用程序升温直接还原碳化法制备不同碳化终温(640、660、680、700和720℃)的碳化钼催化剂,通过XRD、N_2吸附-脱附、SEM、TEM、XPS和Raman表征研究碳化钼的物理性质和结构性质,并研究不同碳化终温碳化钼对喹啉加氢脱氮的催化性能。结果表明,不同碳化终温的碳化钼催化剂均为β-Mo_2C,碳化终温可显著改变碳化钼表面物种含量、平均孔径和介孔分布。碳化终温为680℃时,催化剂碳化程度较高,表面氧物种含量最低,表面C/Mo物质的量比最高,对应的催化活性也最佳,在340℃、4 MPa条件下,喹啉的转化率和脱氮率均高达99%以上,芳香族类化合物的选择性可达37.8%,显示出较低的芳环破坏性。表面组成尤其是表面氧对于β-Mo_2C上喹啉加氢脱氮反应途径的调控至关重要。     

Exchange reactions of distibines

Distibines of the type R₂SbSbR′₂ with R = CH₃, R′ = C₂H₅ (1), R = CH₃, R′= n-C₃H₇ (2), R = CH₃, R′= C₆H₅ (3), R = C₂H₅, R′= C₆H₅ (4), R = n-C₃H₇, R′ = C₆H₅ (5), and R = CH₃, R′ = 2,4,6-(CH₃)₂C₆H₂ (6) are formed in equilibria by exchange reactions of the respective distibines of the type R₄Sb₂ and R′₄Sb₂.     

A localized molecular orbital study on the bonding of> Mo3S4]2Mo> and> Mo3S4]CuI> versus (C6H6)2Cr and C6H6Cr(CO)3

The energy-localized CNDO/2 molecular orbitais have been calculated for the clusters containing molybdenum, > {Mo₃S₄₂Mo}⁸⁺ and> Mo₃S₄]CuI> ⁴⁺, versus the prototype arene-metal sandwich (C₆H₆)₂Cr and half-sandwich complexes C₆H₆Cr(CO)₃. The bonding characteristics of these compounds are described from a localization bonding viewpoint. There are two typical M-arene and M-[Mo₃S₄] bondings. One is formed by electron donation from the three-center two-electron π-bonds in the arene or [Mo₃S₄]⁴⁺ ligands into the vacant hybrid orbitais of the “stranger” metal atom. In the other M-arene or M-[Mo₃S₄] bond there is very little donation by the lone electron pair occupying the d AOs of the “stranger” metal atom to the arene or [Mo₃S₄]⁴⁺ ligands. The analogy of the ligand [Mo₃S₄]⁴⁺ in the clusters studied with the ligand benzene is also briefly discussed.     

Synthesis and X-ray structure of the Mo(VI) species Mo4O12(C12H30N4S2)2(C3H7ON)n (n ≈ 2)

Dissolution of Mo₂O₅((CH₃)₂NCH₂CH₂NHCH₂CH₂S)₂ in dimethylformamide results in the formation of a species without coordinated sulphur, as indicated by ⁹⁵Mo NMR spectroscopy. Subsequent crystallization of this solution yielded the compound Mo₄O₁₂(C₁₂H₃₀N₄S₂)₂(C₃H₇ON)₂ which X-ray crystallography shows to consist of a novel Mo₄O₁₂ core, containing an eight-membered Mo₄O₄ ring with the two pairs of diagonal molybdenum atoms linked by disulphido-containing groups.     

Desorption kinetic detection of different adsorption sites on opened carbon single walled nanotubes: The adsorption of n-nonane and CCl4

We show that thermal desorption kinetics clearly resolve adsorbates bound in different sites on single walled carbon nanotube bundles. The molecules n-C₉H₂₀ and CCl₄ were compared and it was found that the nanotube internal sites exhibited the highest desorption temperature, whereas external groove sites exhibited the next highest desorption temperature for both molecules. When n-C₉H₂₀ and CCl₄ coadsorb, the more strongly bound n-C₉H₂₀ quantitatively displaces CCl₄ from internal sites to groove sites. Molecular shape governs the capacity of the different sites for the two molecules.     

Ergebnisse aus versuchen zur darstellung von bis(trifluormethylsulphanyl)thioketen (CF3S)2C=C=S

The attempted preparation of bis(trifluoromethylsulphanyl)thioketene is described. Mono-and di-(trifluoromethylsulphanyl)-substituted orthothioesters may be prepared fromCH₃C(SC₂H₅)₃ and CF₃SCl in the presence of anhydrous ZnCl₂. The unstable compoundshave been isolated and characterized. The corresponding CF₃Se and CF₃SO₂ derivativesare only formed as intermediates which decompose to ketene diethylmercaptal. Suchmono- and di-substituted products are obtained in good yield from H₂C=C(SC₂H₅)₂ andCF₃ECl (E=S, Se). The reaction of H₂C=C(SC₂H₅)₂ with CF₃SO₂F gave only poor yieldsof (CF₃SO₂)_nCH_2−n=C(SC₂H₅)₂ (n=1, 2) which were only capable of characterizationin etheral solution by spectral means. Attempts to prepare (CF₃S)₂C=C=S by refluxing(CF₃S)₂CHC(O)Cl, (CF₃S)₂CHC(O)OH or (CF₃S)₂C=C=O with P₄S₁₀ in toluene yieldedonly the cyclic dimer and the corresponding 1,3,4-trithiolan.     

Synthesis and properties of alkyldicyclopentadienyl-vanadium(III) compounds

The compounds Cp₂VR (R = CH₃, C₂H₅, n-C₃H₇, n-C₄H₉, n-C₅H₁₁, CH₂C(CH₃)₃ or CH₂Si(CH₃)₃) have been prepared from Cp₂ VCl and RMgX in n-pentane. The air-sensitive compounds are stable at room temperature, but decompose between 65 and 138°C. The thermal stability decreases in the order R = CH₃ CH₂Si(CH₃)₃ > C₂H₅ > CH₂C(CH₃)₃ > n-C₅H₁₁ > n-C₄H₉ > n-C₃H₇. Compounds with R = i-C₃H₇ or t-C₄H₉ could not be obtained.     

The synthesis and liquid crystalline behaviour of alkoxy-substituted derivatives of 1,4-bis(phenylethynyl)benzene

Despite the prevalence of organised 1,4-bis(phenylethynyl)benzene derivatives in molecular electronics, the interest in the photophysics of these systems and the common occurrence of phenylethynyl moeties in molecules that exhibit liquid crystalline phases, the phase behaviour of simple alkoxy-substituted 1,4-bis(phenylethynyl)benzene derivatives has not yet been described. Two series of 1,4-bis(phenylethynyl)benzene derivatives, i.e. 1-[(4'-alkoxy)phenylethynyl]-4-(phenylethynyl)benzenes (5a-5f) and methyl 4-[(4'-alkoxy)phenylethynyl-4'-(phenylethynyl)] benzoates (18a-18f) [alkoxy = n-C₄H₉ (a), n-C₆H₁₃ (b), n-C₉H₁₉ (c), n-C₁₂H₂₅ (d), n-C₁₄H₂₉ (e), n-C₁₆H₃₃ (f)] have been prepared and characterised. Both series have good chemical stability at temperatures up to 210°C, the derivatives featuring the methyl ester head-group (18a-18f) offering rather higher melting points and generally stabilising a more diverse range of mesophases at higher temperatures than those found for the simpler compounds (5a-5f). Smectic phases are stabilised by the longer alkoxy substituents, whereas for short and intermediate chain lengths of the simpler system (5a-5c) nematic phases dominate. Diffraction analysis was used to identify the SmB_hex phase in (5d-5f) that is stable within a temperature range of approximately 120-140°C. The relationships between the organisation of molecules within these moderate temperature liquid crystalline phases and other self-organised states (e.g. Langmuir-Blodgett films) remain to be explored.     

Kinetics study of the gas-phase reactions of C2F5OC(O)H and n-C3F7OC(O)H with OH radicals at 253–328 K

The rate constants, k₁ and k₂ for the reactions of C₂F₅OC(O)H and n-C₃F₇OC(O)H with OH radicals were measured using an FT-IR technique at 253–328 K. k₁ and k₂ were determined as (9.24 ± 1.33) × 10⁻¹³ exp[−(1230 ± 40)/T] and (1.41 ± 0.26) × 10⁻¹² exp[−(1260 ± 50)/T] cm³ molecule⁻¹ s⁻¹. The random errors reported are ±2 σ, and potential systematic errors of 10% could add to the k₁ and k₂. The atmospheric lifetimes of C₂F₅OC(O)H and n-C₃F₇OC(O)H with respect to reaction with OH radicals were estimated at 3.6 and 2.6 years, respectively.     

Thermodynamics of (1,4-difluorobenzene + an n-alkane) and of (hexafluorobenzene + an n-alkane)

Excess molar enthalpies H^E and excess molar volumes V^E have been measured, as a function of mole fraction x₁, at 298.15 K and atmospheric pressure for the five liquid mixtures (x₁1,4-C₆H₄F₂ + x₂n-C_lH_2l+2), l = 7, 8, 10, 12 and 16. In addition, H^E and excess molar heat capacities C_P^E at constant pressure have been determined for the two liquid mixtures (x₁C₆F₆ + x₂n-C_lH_2l+2), l = 7 and 14, at the same temperature and pressure. The instruments used were flow microcalorimeters of the Picker design (the H^E version was equipped with separators) and a vibrating-tube densimeter, respectively.

The excess enthalpies of the five difluorobenzene mixtures are all positive and quite large; they increase with increasing chain length l of the n-alkane from H^E(x₁ = 0.5)/(J mol⁻¹) = 1050 for l = 7 to 1359 for l = 16. The corresponding excess volumes V^E are all positive and also increase with increasing l: V^E(x₁ = 0.5)/(cm³ mol⁻¹) = 0.650 for l = 7 and 1.080 for l = 16. Interestingly, the excess enthalphies of the corresponding mixtures with hexafluorobenzene are only about 5% larger, whereas the excess volumes of (x₁C₆F₆ + x₂n-C_lH_2l+2) are roughly twice as large as those of their counterparts in the series containing 1,4-C₆H₄F₂. Specifically, at 298.15 K H^E(x₁ = 0.5)/(J mol⁻¹) = 1119 for (x₁C₆F₆ + x₂n-C₇H₁₆) and 1324 for (x₁C₆F₆ + x₂n-C₁₄H₃₀), and for the same mixtures V^E(x₁ = 0.5)/(cm³ mol⁻¹) = 1.882 and 2.093, respectively. The excess heat capacities for both systems are negative and of about the same magnitude as the excess heat capacities of mixtures of fluorobenzene with the same n-alkanes (Roux et al., 1984): C_P^E(x₁ = 0.5)/(J K⁻¹ mol⁻¹) = −1.18 for (x₁C₆F₆ + x₂n-C₇H₁₆), and −2.25 for (x₁C₆F₆ + x₂n-C₁₄H₃₀). The curve C_P^E vs. (x₁ for x₁C₆F₆ + x₂n-C₁₄H₃₀) shows a sort of “hump” for x₁ 0.5, which is presumed to indicate emerging W-shape composition dependence at lower temperatures.     

Study of the reaction of 1,1-bis(trimethylsilyl)-2-phenylethylene with some acyl chlorides in the presence of AlCl3

1,1-Bis(trimethylsilyl)-2-phenylethylene (1), which has been synthesized from the Peterson reaction between (Me₃Si)₃CLi and benzaldehyde, reacts with various acyl chlorides (RCOCl, R = Me, Et, iso-Pr, n-Bu, iso-Bu, iso-C₅H₁₁, PhCH₂, PhCH₂CH₂) in the presence of AlCl₃ to give -silyl-,β-unsaturated enones 3a–3h with high E stereoselectivity along with trans-,β-unsaturated ketones 4a–4h. The enones 3 can be partially converted into the ketones 4 with an excess of AlCl₃. Reaction of 1 with RCOCl, (R = Ph, CH₃CH=CH) afforded only the ketones 4. Yields were dependent on time and the amounts of AlCl₃ used.     

Studies of N-heterocyclic compounds with triosmium clusters: Formation of the heterocyclic-linked dicluster compound [Os 6(μ-H)2(μ3-C6H4N3)2(CO)18]

The cluster [Os₃(CO)₁₀(MeCN)₂] reacts with indazole (C₇H₆N₂) to give two isomeric products [0s₃(μ-H)(μ-C₇H₅N₂)(CO)₁₀] in which the five-membered ring has been metallated with N-H cleavage to give an N,N-bonded isomer or with C-H cleavage to give a C,N-bonded isomer. These two isomers have very similar X-ray structures but can be clearly distinguished by ¹H NMR methods. They are shown to correspond to related clusters derived from pyrazole. Benzotriazole (C₆H₅N₃) also reacts (as shown earlier by others) to give two isomers: an N,N-bonded species [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₁₀] coordinated only through the five-membered ring and a minor C,N-bonded isomer [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₁₀], metallated at the C₆ ring and coordinated through both rings. The former isomer reacts with Me₃NO in acetonitrile to give [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₉(MeCN)] which thermally looses MeCN to produce the coupled product [Os₆(μ-H)₂(μ₃-C₆H₄N₃)₂(CO)₁₈] which was shown by X-ray structure determination to have all six nitrogen atoms coordinated to osmium, a novel situation for coordinated benzotriazole. The two Os₃ units are linked together by an OsNNOsNN ring in a boat conformation with the whole cluster adopting C₂ symmetry.     

Regioselective addition of chalcogenol to an η-propargyl/allenyl complex via formation of the carbon-chalcogen bond leading to new chalcogenoxyallyl species

Regioselective addition of chalcogenol to an ν³-propargyl complex Pt(PPh₃)₂(η³-C₃H₃)](BF₄) (2) via the formation of the C---O, C---S, or C---Se bond generates new cationic chalcogenoxyallyl species {Pt(PPh₃)₂[η³CH₂C(ER)CH₂]}(BF₄) (E = O, R = Me 4(a), Et (4b, ⁱPr (4c), ¹Bu (4d), Ph (4e); E=S, E=Et (5b), ^tBu (5d, Ph (5e); E=Se, R=Ph (6e )) respectively in good yields. Thiol and selenol react with complex 2 much faster than alcohol; and 2 reacts with p-(HO)C₆H₄(SH) to exclusively yield the thioxyallyl product {Pt(PPh₃)₂[η³-CH₂C(SC₆H₄OH)CH₂]}(BF₄) (5f). Among the alcoh and phenol, thereactivity follows the order MeOH > EtOH >, ⁱPrOH >, ^tBuOH > PhOH. A mechanism comprising a preceding coordination step is postulated. The X-ray structures of 4b, 4e, 5b, 5e and 6e are provided.