Ab initio HF, DFT and experimental (FT-IR) investigation of vibrational spectroscopy of P-N,N-dimethylaminobenzylidenemalononitrile (DBM)

The optimized geometry and vibrational frequencies of P-N,N-dimethylaminobenzylidenemalononitrile (DBM) were obtained by ab initio HF and DFT/B3LYP levels with complete relaxation in the potential energy surface using 6-31++G(d,p) and 6-311++G(d,p) basis sets. The Fourier-transform infrared (FT-IR) spectrum of DBM has been recorded in the region 4000-400 cm(-1). The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FT-IR spectrum. The calculated frequencies are in good agreement with the experimental frequencies.     

Theoretical and experimental study of the absolute configuration of helical structure of (2R,3S)-Rubiginone A2 analog

A novel analogue of (2R,3S)-Rubiginone A₂ was synthesized as a chiral helical model compound via an eight-step procedure (2.7% overall yield). Quantum methods, such as density functional theory (DFT) at different basis sets of 6-311+(d), 6-311++G(2d,p), were used to compute its optical rotation and electronic circular dichroism at the B3LYP/6-311++G(2d,p) level in the gas phase and in solution using PCM model, respectively. UV corrections were performed in electronic circular dichroism (ECD) simulations to match the experimental ECD well. The suitable computational methods, e.g., B3LYP/6-311++G(2d,p)//B3LYP/6-311++G(2d,p) in the gas phase using zero-point energy in Boltzmann statistics, were found and suggested for optical rotation and circular dichroism computations that can be used for absolute configuration determination of chiral helical compounds.     

NMR spectra, GIAO and charge density calculations of five-membered aromatic heterocycles

The B3LYP/6-31+G(d) molecular geometry optimized structures of 17 five-membered heterocycles were employed together with the gauge including atomic orbitals (GIAO) density functional theory (DFT) method at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p) and B3LYP/6-311+G(2d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants. The method of geometry optimization for pyrrole (1), N-methylpyrrole (2) and thiophene (7) using the larger 6-311++G(d,p) basis sets at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,p) and B3LYP/cc-pVTZ levels of theory gave little difference between calculated and experimental values of coupling constants. In general, the (1)H and 13C chemical shifts for all compounds are in good agreement with theoretical calculations using the smaller 6-31 basis set. The values of nJHH(n=3, 4, 5) and rmnJ(CH)(n=1, 2, 3, 4) were predicted well using the larger 6-31+G(d,p) and 6-311++G(d,p) basis sets and at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,2p) levels of theory. The computed atomic charges [Mülliken; Natural Bond Orbital Analysis (NBO); Merz-Kollman (MK); CHELP and CHELPG] for the B3LYP/6-311++G(d,p) geometry optimized structures of 1-17 were used to explore correlations with the experimental proton and carbon chemical shifts.     

Structural and electronic properties of heptachlor

In this work, the molecular geometry of heptachlor is investigated using ab initio HF, DFT, LDA, and GGA methods. The natural bond orbital (NBO) analysis is performed at the B3LYP/6-311++G(d,p) level of theory. The first order hyperpolarizability β_total, the mean polarizability Δα, the anisotropy of the polarizability Δα, and the dipole moment μ, are calculated by B3LYP/6-311++G(d,p) and HF/6- 311++G(d,p) methods. The first order hyperpolarizability (β_total) is calculated based on the finite field approach. UV spectral parameters along with HOMO, LUMO energies for heptachlor are determined in vacuum and the solvent phase using HF, DFT, and TD-DFT/B3LYP methods implemented with the 6-311++G(d,p) basis set. Atomic charges and electron density of heptachlor in vacuum and ethanol are calculated using DFT/B3LYP and TD-DFT/B3LYP methods and the 6-311++G(d,p) basis set. In addition, after the frontier molecular orbitals (FMOs), the molecular electrostatic potential (MEP), the electrostatic potential (ESP), the electron density (ED), and the solvent accessible surface of heptachlor are visualized as a results of the B3LYP/6-311++G(d,p) calculation. Densities of states (DOS), the external electric field (EF) effect on the HOMO-LUMO gap, and the dipole moment are investigated by LDA and GGA methods.     

Vibrational and electronic spectra of 9,10-dihydrobenzo(a)pyren-7(8H)-one and 7,8,9,10-tetrahydrobenzo(a)pyrene: an experimental and computational study

The molecular geometries, vibrational and UV-vis spectra of 9,10-dihydrobenzo(a)pyrene-7(8H)-one (9,10-H(2)BaP) and 7,8,9,10-tetrahydrobenzo(a)pyrene (7,8,9,10-H(4)BaP) were investigated using density functional theory (DFT-B3LYP), with the triple-ζ 6-311+G(d,p) and Dunning's cc-pVTZ basis sets. From the comparison of infrared experimental and calculated infrared, and Raman data comprehensive assignments are made. The calculated infrared frequencies below 1800 cm(-1) are in good agreement with experimental data, with an average deviation of <4 cm(-1). Using the B3LYP/6-311+G(d,p)//TD-B3LYP/6-311G(d,p) level of theory, transition energies, and oscillator strengths of the 30 lowest electronic absorption bands are assigned to π-π* transitions, with good qualitative agreement between experimental and simulated absorption data. In addition, the HOMO-LUMO gaps and their chemical hardness were analyzed.     

Theoretical study of the conformational energy hypersurface of cyclotrisarcosyl

The multidimensional Conformational Potential Energy Hypersurface (PEHS) of cyclotrisarcosyl was comprehensively investigated at the DFT (B3LYP/6-31G(d), B3LYP/6-31G(d,p) and B3LYP/6-311++G(d,p)), levels of theory. The equilibrium structures, their relative stability, and the Transition State (TS) structures involved in the conformational interconversion pathways were analyzed. Aug-cc-pVTZ//B3LYP/6-311++G(d,p) and MP2/6-31G(d)//B3LYP/6-311++G(d,p) single point calculations predict a symmetric cis-cis-cis crown conformation as the energetically preferred form for this compound, which is in agreement with the experimental data. The conformational interconversion between the global minimum and the twist form requires 20.88 kcal mol-1 at the MP2/6-31G(d)//B3LYP/6-311++G(d,p) level of theory. Our results allow us to form a concise idea about the internal intricacies of the PEHSs of this cyclic tripeptide, describing the conformations as well as the conformational interconversion processes in this hypersurface. In addition, a comparative analysis between the conformational behaviors of cyclotrisarcosyl with that previously reported for cyclotriglycine was carried out     

FT-IR, FT-Raman spectra and quantum chemical calculations of some chloro substituted phenoxy acetic acids

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of o-chlorophenoxy acetic acid (OCPAA) and p-chlorophenoxy acetic acids (PCPAA). The FT-IR and Fourier transform-Raman spectra of both the compounds was recorded in the solid phase. The optimized geometry was calculated by HF and B3LYP methods with 6-311++G(d,p) basis set and harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by density functional B3LYP method with the 6-311++G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compounds were also performed at B3LYP/6-311++G(d,p) level of theory. A detailed interpretation of the infrared and Raman spectra of o-chloro and p-chlorophenoxy acetic acid is reported. The theoretical FT-IR spectrograms for the title molecules have been constructed.     

Structural elucidation of nitro-substituted five-membered aromatic heterocycles utilizing GIAO DFT calculations

The GIAO (Gauge Including Atomic Orbitals) DFT (Density Functional Theory) method is applied at the B3LYP/6-31+G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311++G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311+G (2d,p)//B3LYP/6-31+G(d) and B3LYP/6-311++G(d,p)//B3LYP/6-311++G(d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants for 25 nitro-substituted five-membered heterocycles. Difference (1D NOE) spectra in combination with long-range gHMBC experiments were used as tools for the structural elucidation of nitro-substituted five-membered heterocycles. The assigned NMR data (chemical shifts and coupling constants) for all compounds were found to be in good agreement with theoretical calculations using the GIAO DFT method. The magnitudes of one-bond (1JCH) and long-range (nJCH, n>1) coupling constants were utilized for unambiguous differentiation between regioisomers of nitro-substituted five-membered heterocycles.     

Characterization of pentacarbonyl(4-methylpyridine)chromium(0) complex using density functional theory (DFT) and Hartree-Fock (HF) computational methods

The optimized molecular structure, atomic charges, vibrational frequencies, thermodynamic properties, nuclear magnetic resonance (NMR) and ultraviolet-visible (UV-Vis) spectral data of pentacarbonyl(4-methylpyridine)chromium(0) complex have been investigated by performing ab initio Hartree-Fock (HF) and density functional theory, B3LYP, B3PW91 and BE1PBE methods with 6-311G, 6-311+G(3d,3p) and 6-31G(d,p) basis set. The calculated NMR data at 6-311G basis set, vibrational frequencies at 6-311+G(3d,3p) basis set and the optimized geometric bond lengths and bond angles at 6-31G(d,p) basis set are in good agreement with the corresponding experimental values. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) have been simulated. In addition, the transition state and energy band gap and infrared intensities have also been reported.     

乙醇-水分子团簇C2H5OH(H2O)n (n=1-9)稳定结构的量子化学研究

采用密度泛函理论B3LYP方法, 在B3LYP/6-311++G(2d,2p)//B3LYP/6-311++G(d,p)基组水平上对乙醇-水分子团簇(C₂H₅OH(H₂O)_n (n=1-9))的各种性质进行研究, 如: 优化的几何构型、结构参数、氢键、结合能、平均氢键强度、自然键轨道(NBO)电荷分布、团簇的生长规律等. 结果表明, 从二维(2-D)环状结构到三维(3-D)笼状结构的过渡出现在n=5的乙醇-水分子团簇中. 此外, 利用团簇结合能的二阶差分、形成能、能隙等性质, 发现在n=6时乙醇-水分子团簇的最低能量结构稳定性较好, 可能为幻数结构. 最后, 为了进一步探讨氢键本质, 将C₂H₅OH(H₂O)_n (n=2-9)最低能量结构的各种性质与纯水分子团簇(H₂O)_n (n=3-10)比较, 结果表明前者与后者中的水分子之间氢键相似.     

Peptide models. XXXIII. Extrapolation of low-level Hartree-Fock data of peptide conformation to large basis set SCF,MP2, DFT,and CCSD(T) results. The Ramachandran surface of alanine dipeptide computed at various levels of theory

At the dawn of the new millenium, new concepts are required for a more profound understanding of protein structures. Together with NMR and X-ray-based 3D-structure determinations in silico methods are now widely accepted. Homology-based modeling studies, molecular dynamics methods, and quantum mechanical approaches are more commonly used. Despite the steady and exponential increase in computational power, high level ab initio methods will not be in common use for studying the structure and dynamics of large peptides and proteins in the near future. We are presenting here a novel approach, in which low- and medium-level ab initio energy results are scaled, thus extrapolating to a higher level of information. This scaling is of special significance, because we observed previously on molecular properties such as energy, chemical shielding data, etc., determined at a higher theoretical level, do correlate better with experimental data, than those originating from lower theoretical treatments. The Ramachandran surface of an alanine dipeptide now determined at six different levels of theory [RHF and B3LYP 3-21G, 6-31+G(d) and 6-311++G(d,p)] serves as a suitable test. Minima, first-order critical points and partially optimized structures, determined at different levels of theory (SCF, DFT), were completed with high level energy calculations such as MP2, MP4D, and CCSD(T). For the first time three different CCSD(T) sets of energies were determined for all stable B3LYP/6-311++G(d,p) minima of an alanine dipeptide. From the simplest ab initio data (e.g., RHF/3-21G) to more complex results [CCSD(T)/6-311+G(d,p)//B3LYP/6-311++G(d,p)] all data sets were compared, analyzed in a comprehensive manner, and evaluated by means of statistics.     

Theoretical studies on dynamics and thermochemistry of the reactions CF(3)CHCl(2)+Cl-->CF(3)CCl(2)+HCl and CF(3)CHFCl+Cl-->CF(3)CFCl+HCl

A dual-level direct dynamics study has been carried out for the two hydrogen abstraction reactions CF(3)CHCl(2)+Cl and CF(3)CHFCl+Cl. The geometries and frequencies of the stationary points are optimized at the BHLYP/6-311G(d,p), B3LYP/6-311G(d,p), and MP2/6-31G(d) levels, respectively, with single-point calculations for energy at the BHLYP/6-311++G(3df,2p), G3(MP2), and QCISD(T)/6-311G(d,p) levels. The enthalpies of formation for the species CF(3)CHCl(2), CF(3)CHFCl, CF(3)CCl(2), and CF(3)CFCl are evaluated at higher levels. With the information of the potential energy surface at BHLYP/6-311++G(3df,2p)//6-311G(d,p) level, we employ canonical variational transition-state theory with small-curvature tunneling correction to calculate the rate constants. The agreement between theoretical and experimental rate constants is good in the measured temperature range 276-382 K. The effect of fluorine substitution on reactivity of the C-H bond is discussed.     

The molecular structure of fluoromalononitrile as determined by gas-phase electron diffraction and ab initio calculations

The molecular structure of fluoromalononitrile was studied by means of gas-phase electron diffraction and quantum mechanical methods using HF/6-31G(d), MP2/6-311++G(2df,2pd) and DFT/B3LYP/6-31G(d), B3PW91/6-31G(d), B3LYP/6-311++G(2df,2pd) and B3PW91/6-311++G(2df,2pd). The r(g) and angle(alpha) structural parameters we obtained from the present analysis are: CC=1.487(5) A, CN=1.157(3) A, CF=1.386(5) A, CH=1.096 A (ass.), angleCCC=106.7(1.0) degrees , angleCCF=108.0(0.7) degrees , angleCCN=177.6(2.0) degrees . Uncertainties in parenthesis are 3sigma.     

Conformational stability, the spectroscopic (FT-IR and UV), first order hyperpolarizability, NBO analysis, HOMO and LUMO analysis of 6,8-diphenylimidazo[1,2-α]pyrazine molecule by ab initio HF and density functional methods

The conformational analysis of 6,8-diphenylimidazo[1,2-α]pyrazine molecule (abbreviated as 68DIP) was performed by using B3LYP/6-31G(d) level of theory to find the most stable form. Two staggered stable conformers were observed on the torsional potential energy surface. The equilibrium geometry, bonding features and vibrational frequencies of 68DIP have been investigated by using the DFT (B3LYP) and HF methods for the lowest energy conformer. The first order hyperpolarizability (β(total)) of this molecular system and related properties (β, μ, <α> and Δα) are calculated using HF/6-311++G(d,p) and B3LYP/6-311++G(d,p) methods based on the finite-field approach. Stability of the molecule arising from hyperconjugative interactions, charge delocalization and C-H?N intramolecular hydrogen-bond-like weak interaction has been analyzed using natural bond orbital (NBO) analysis by using B3LYP/6-311++G(d,p) method. The results show that electron density (ED) in the σ* and π* antibonding orbitals and second order delocalization energies E((2)) confirm the occurrence of intramolecular charge transfer (ICT) within the molecule. UV-vis spectrum of the compound was recorded and electronic properties, such as HOMO, LUMO energies, excitation energies and wavelength were performed by TD-DFT/B3LYP, CIS and TD-HF methods by using 6-311++G(d,p) basis set. Finally, the calculation results were applied to simulated infrared spectra of the title compound which show good agreement with observed spectra.     

Molecular docking studies,structural and spectroscopic properties of monomeric and dimeric species of benzofuran-carboxylic acids derivatives: DFT calculations and biological activities

Structural optimization, molecular docking analysis, electronic and vibrational properties have been investigated for the 1-benzofuran-2-carboxylic acid (2BF) and 1-benzofuran-3-carboxylic acid (3BF) using DFT/B3LYP/6-311++G(d,p) level of theory. The theoretical parameters have a very good consistency with the experimental ones. The weak intermolecular interactions were analyzed by different tool such as: Hirshfeld surfaces, topological analysis and natural bond orbital studies. The nonlinear optical properties have been investigated. Molecular electrostatic potential and frontier molecular orbitals (FMOs) analysis have been carried out to understand the reactivity of the molecule. In addition, TD-DFT calculation is initiated to simulate the UV–vis absorption spectrum and to determine several important electronic properties like HOMO-LUMO gap energy and electronic transitions. The complete vibrational assignments and the force constants were reported for monomer and dimers of both acids. The biological activities of the tow acids have been studied via molecular docking analysis. The later calculations prove that the studied acids have an inhibitor effect against cancer and microbial diseases.     

Thermochemical properties of molecules and cations of MgNnHm (n=1,2 and m=1–6): enthalpies of formation, proton affinities and ionization energies

Ab initio molecular orbital calculations are reported for small neutral molecules and cations containing magnesium, nitrogen and hydrogen. Structures have been optimized using gradient techniques at B3LYP/6-31+G(d) and at MP2(full)/6-311++G(d,p). Single-point calculations are reported at QCISD(T)(full)/6-311++G(2df,p) and at CCSD(T)(full)/6-311++G(2df,p) levels using geometries optimized at MP2(full)/6-311++G(d,p). Standard enthalpies of formation at 298 K have been calculated at these two higher levels of theory. Other thermochemical properties calculated include ionization energies and proton affinities. The binding enthalpies of ammonia to Mg⁺, MgNH₂⁺ and MgNH₃⁺ are also reported.     

Structural and electronic properties of a Benzoin monomer

In the present work, we report structural and electronic properties of a benzoin monomer named as 2-oxo-1,2-diphenylethyl-2-bromopropanoate (C₁₇H₁₄BrO₃). The previously synthesized compound is characterized by single crystal X-ray diffraction. The optimized molecular geometry (bond lengths, and bond angles), HOMO-LUMO analysis and molecular electrostatic potential (MEP) are calculated by density functional theory (DFT) and Hartree-Fock (HF) methods with 6-311G(d) basis set in the neutral ground state and using DFT methods for singly oxidized doublet, singly reduced doublet, and neutral triplet state for the benzoin compound. The X-ray structure determination of the compound is compatible with the geometric parameters calculated at B3LYP/6-311G(d). In the triplet state the HOMO-LUMO energy gap of 2.39?eV which indicates semi-conductor property is recommended for the photovoltaic devices.     

On the flexibility of beta-peptides

The full conformational space was explored for an achiral and two chiral beta-peptide models: namely For-beta-Ala-NH2, For-beta-Abu-NH2, and For-beta-Aib-NH2. Stability and conformational properties of all three model systems were computed at different levels of theory: RHF/3-21G, B3LYP/6-311++G(d,p)//RHF/3-21G, B3LYP/6-311++G(d,p), MP2//B3LYP/6-311++G(d,p), CCSD//B3LYP/6-311++G(d,p), and CCSD(T)//B3LYP/6-311++G(d,p). In addition, ab initio E = E(phi, micro, psi) potential energy hypersurfaces of all three models were determined, and their topologies were analyzed to determine the inherent flexibility properties of these beta-peptide models. Fewer points were found and assigned than expected on the basis of Multidimensional Conformational Analysis (MDCA). Furthermore, it has been demonstrated, that the four-dimensional surface, E = E(phi, mu, psi), can be reduced into a three-dimensional one: E = E[phi, f(phi), psi]. This reduction of dimensionality of freedom of motion suggests that beta-peptides are less flexible than one would have thought. This agrees with experimental data published on the conformational properties of peptides composed of beta-amino acid residues.