Synthesis, photophysical and electrophosphorescent properties of mononuclear Pt(II) complexes with arylamine functionalized cyclometalating ligands

Four cyclometalated Pt(II) complexes, i.e., [(L²)PtCl] (1b), [(L³)PtCl] (1c), [(L²)PtCCC₆H₅] (2b) and [(L³)PtCCC₆H₅] (2c) (HL² = 4-[p-(N-butyl-N-phenyl)anilino]-6-phenyl-2,2′-bipyridine and HL³ = 4-[p-(N,N′-dibutyl-N′-phenyl)phenylene-diamino]-phenyl-6-phenyl-2,2′-bipyridine), have been synthesized and verified by ¹H NMR, ¹³C NMR and X-ray crystallography. Unlike previously reported complexes [(L¹)PtCl] (1a) and [(L¹)PtCCC₆H₅] (2a) (HL¹ = 4,6-diphenyl-2,2′-bipyridine), intense and continuous absorption bands in the region of 300-500 nm with strong metal-to-ligand charge transfer (¹MLCT) (dπ(Pt) → π^∗(L)) transitions (ε ∼ 2 × 10⁴ dm³ mol⁻¹ cm⁻¹) at 449-467 nm were observed in the UV-Vis absorption spectra of complexes 1b, 1c, 2b and 2c. Meanwhile, with the introduction of electron-donating arylamino groups in the ligands of 1a and 2a, complexes 1b and 2b display stronger phosphorescence in CH₂Cl₂ solutions at room temperature with bathochromically shifted emission maxima at 595 and 600 nm, relatively higher quantum yields of 0.11 and 0.26, and much longer lifetimes of 8.4 and 4.5 μs, respectively. An electrochromic film of 1b-based polymer was obtained on Pt or ITO electrode surface, which suggests an efficient oxidative polymerization behavior. An orange multilayer organic light-emitting diode with 1b as phosphorescent dopant was fabricated, achieving a maximum current efficiency of 11.3 cd A⁻¹ and a maximum external efficiency of 5.7%. The luminescent properties of complexes 1c and 2c are dependent on pH value and solvent polarity, which is attributed to the protonation of arylamino units in the C^N^N cyclometalating ligands.     

Binaphthalene bridged bipolar transporting materials for blue electroluminescence: toward high EL efficiency via molecular tuning

Two isomeric bipolar transporting molecules containing arylamine and benzimidazole moieties linked by 1,1′-binaphthalene bridge have been synthesized and used for blue light-emitting diodes. The highly twisted binaphthalene bridge is beneficial for amorphous morphology, good solubility, high thermal stability and high photoluminescence quantum efficiency (Φ_PL). The charge transfer bands of these compounds exhibit interesting solvent-polarity dependent fluorescence properties. The physical properties of the compounds were tunable upon binding of the benzimidazole with binaphthalene group via C- (BINAPC) or N- (BINAPN) linkage. Three-layered blue-emitting OLEDs using BINAPC or BINAPN as the emitting layer, NPB as the hole transporting layer, and TPBI as the electron transporting layer as well as hole-blocking layer exhibit good performance. External quantum efficiencies of 2.49% with color coordinates of (0.15, 0.11) and 2.67% with color coordinates of (0.16, 0.16) were achieved for BINAPC and BINAPN, respectively.     

Four-coordinate boron compounds derived from 2-(2-pyridyl)phenol ligand as novel hole-blocking materials for phosphorescent OLEDs

Four-coordinate boron compounds of Ph₂B · 1 (2) and (C₆F₅)₃B(1 · H) (3) were prepared from the reaction of 2-(2-pyridyl)phenol (1 · H) ligand with triarylborane starting materials, BPh₃ and B(C₆F₅)₃, respectively, and tested as hole-blocking layer (HBL) materials in phosphorescent OLEDs. While the crystal structure of 2 reveals the pseudo-tetrahedral geometry around the boron center with bidentate [N,O] chelation by 1, 3 is characterized as the zwitterionic four-coordinate system where the ligand 1 · H acts as monodentate [O] chelator with N-protonation. UV-Vis absorption and PL spectra of 2 and 3 are consistent with the ligand-centered, HOMO-LUMO electronic transitions with charge transfer from a phenoxide ring to a pyridine, which was further supported by time dependent DFT calculation for 2. Both compounds are found to possess the HOMO-LUMO energy gap of 3.1 eV appropriate for hole-blocking materials for phosphorescent OLEDs. The devices incorporating 2 and 3 as HBL materials displayed stable green phosphorescence of Ir(ppy)₃ (ppy = 2-phenylpyridine) with low turn-on voltage of 3.2 and 3.4 V, respectively, indicating that 2 and 3 function as HBL materials. Although both devices show the short lifetime (<1 h) probably owing to the low thermal stability, the device based on 2 displays better performances in terms of luminance, power and luminance efficiency, and external quantum efficiency in a wide range of current densities (0.1-100 mA/cm²) than the reference device incorporating BAlq as HBL materials.     

Fluorescent detection of amidinium-carboxylate and amidinium formation using a 1,8-diphenylnaphthalene-based diamidine: dicarboxylic acid recognition with high fluorescence efficiency

A 1,8-diphenylnaphthalene-based diamidine (1) ‘turn-on’ fluorescent probe for the detection of dicarboxylic acids has been designed and synthesized. The fluorescence spectra of the diamidine 1 with carboxylic acids that showed two different fluorescence bands, which corresponded to the amidinium-carboxylate (λ_em=410–430 nm) and amidinium (λ_em=440–470 nm as a broad band, which consisted from two peaks) formation, were confirmed by DOSY NMR and TD-DFT calculations. The complexation of diamidine 1 with dicarboxylic acids, which have sufficient distances between the two carboxylic groups for binding to the diamidine 1 (dicarboxylic acids 3, 4, and α,ω-dicarboxylic acids 6 (C₆–C₂₀)), showed the formation of 1:1 complexes (i.e., amidinium-carboxylate formation). On the other hand, for the complexation with monocarboxylic acids and dicarboxylic acids having insufficient distances between the two carboxylic groups (benzoic acid 5, acetic acid 7, and α,ω-dicarboxylic acids 6 (C₃–C₅)), formation of the amidinium (1·2H⁺) was observed. Relatively similar binding constants (10⁻⁵) for the complexation of the diamidine 1 with dicarboxylic acids 6, which depend on their chain length (strain), were observed due to the flexibility of the 1,8-diphenylnaphthalene unit. Additionally, for the complexation of the diamidine 1 with dicarboxylic acids, higher fluorescence quantum yields (Φ_fl: up to 80%) were observed when compared to the binding of the diamidine 2 (Φ_fl: up to 35%).     

Oligofluorene-based push-pull type functional materials for blue light-emitting diodes

A series of new oligofluorene-based push-pull type blue light-emitting functional materials, namely, 2-(9H-carbazole-9-yl)-7-(4-cyanophenyl)-9,9-dihexylfluorene (F1), 7-(9H-carbazol-9-yl)-7′-(4-cyanophenyl)-2,2′-bi(9,9-dihexylfluorene) (F2), 7-(9H-carbazole-9-yl)-7″-(4-cyanophenyl)-2,2′:7′,2″-ter(9,9-dihexylfluorene) (F3), and 7-(9H-carbazole-9-yl)-7″′-(4-cyanophenyl)-2,2′:7′,2″:7″,2″′-quarter(9,9-dihexylfluorene) (F4) were synthesized and characterized. Their onset decomposition temperatures for the thermal bond cleavage and the glass-transition temperatures were in general increased with increasing number of fluorene units. In dilute toluene solution, the oligofluorenes exhibited main absorption peaks in the range of 343-370 nm, photoluminescence maxima from 403 to 410 nm, and absolute quantum yields (Φ_PLs) of higher than 87%. In contrast, the absorption spectra of these compounds in the thin films had no large differences from those in the solutions except for the slight peak red-shifts (2-8 nm). The main emission maxima of F1, F2, and F3 in the thin films were located at 418-420 nm, while the main emission of F4 was found to be shifted to 446 nm, followed by a shoulder peak at 421 nm. The Φ_PLs of these thin films were estimated in the range of 59.2-68.7%. The existence of the electron-pull and -push end groups could effectively tune the energy levels of the oligofluorenes. By using the organic light emitting device (OLED) configuration of ITO/PEDOT:PSS/oligofluorenes/TPBi/LiF/Al by solution-process, F4 displayed the best performance: the lowest turn-on voltage (4.1 V) and highest maximum luminance (2180 cd/m²) with maximal current efficiency of 1.17 cd/A. When F4 was fabricated into the optimized device of ITO/MoO₃/NPB/CBP:F4(1:4)/TPBi/LiF/Al by vapor deposition, highest brightness of 5135 cd/m² and current efficiency of 1.76 cd/A were achieved with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.16, 0.09).     

Di- and tetracarboxylate ligands for highly luminescent terbium(III) complexes on the basis of sulfonylcalix[4]arene scaffold

New di- (2) and tetracarboxylate ligands (4) were prepared on a sulfonylcalix[4]arene platform by O-alkylation of thiacalix[4]arene with ethyl bromoacetate, followed by hydrolysis of the ester function and oxidation of the sulfide bridges. The sulfonyl-based ligands 2 and 4 formed luminescent 1:1 complexes with terbium(III) ion having higher luminescent quantum yield (Φ = 0.29₁ and 0.28₇, respectively) than 1:1 complexes of the corresponding thiacalix[4]arene-based di- (1) and tetracarboxylate ligands (3) (Φ = 0.03₈ and 0.00₃, respectively), implying higher efficiency of sulfonyl ligands (2 and 4) than those of thia ligands (1 and 3) in the energy transfer process.     

Conjugated C3 symmetric aryl tripyrroles and aryl bipyrroles: synthesis,optical and electronic properties

Conjugated C₃ symmetric molecules have been pursued for their fluorescent and electrochemical properties. The synthesis of conjugated C₃ symmetric aryl tripyrroles has been performed by a route featuring three steps from trimethyl 1,3,5-benzene tricarboxylate 6: copper-catalyzed cascade addition of vinylmagnesium bromide to convert the carboxylates into γ,δ-unsaturated ketones, Tsuji–Wacker olefin oxidations to form tris(1,4-dione) 9, and Paal–Knorr condensation with ammonia and different amines to furnish the final tripyrroles (30–60% yields). In addition, incomplete reaction of vinylmagnesium bromide to 6 provided benzoate 8 possessing two γ,δ-unsaturated ketones, which were similarly converted to 3,5-dipyrrolylbenzoates 11. The absolute fluorescence quantum yields (Φ_fl) and electrochemical properties of 5a–c and 11a–c were investigated. The Φ_fl are the first reported for such compounds and they ranged between 2 and 40%, contingent on structure and solvent polarity. Cyclic voltammetry revealed that the compounds could be both oxidized and reduced, albeit irreversibly. The oxidation potentials (E_ox) varied between 0.73 V and 1.2 V and the reduction potentials (E_red) varied from −0.83 V to −1.36 V. The lowest redox processes were measured for the NH–pyrrole 5a. Moreover, tripyrrole 5a was air stable and on oxidative doping with ferric chloride exhibited a 50 nm bathochromic shift in its absorbance spectrum.     

A novel series of iridium complexes with alkenylquinoline ligands: Theoretical study on electronic structure and spectroscopic property

The ground and the lowest-lying triplet excited state geometries, electronic structures, and spectroscopic properties of a novel series of neutral iridium(III) complexes with cyclometalated alkenylquinoline ligands [(C^N)₂Ir(acac)] (acac = acetoylacetonate; C^N = 2-[(E)-2-phenyl-1-ethenyl]pyridine (pep) 1; 2-[(E)-2-phenyl-1-ethenyl]quinoline (peq) 2; 1-[(E)-2-phenyl-1-ethenyl]isoquinoline (peiq) 3; 2-[(E)-1-propenyl]pyridine (pp) 4; 2-[(E)-1-fluoro-1-ethenyl]pyridine (fpp) 5) were investigated by DFT and CIS methods. The highest occupied molecular orbital is composed of d(Ir) and π(C^N) orbital, while the lowest unoccupied molecular orbital is dominantly localized on C^N ligand. Under the TD-DFT with PCM model level, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized ground and triplet excited state geometries, respectively. The calculated lowest-lying absorptions at 437 nm (1), 481 nm (2), 487 nm (3), 422 nm (4), and 389 nm (5) are attributed to a {[d_x²-y²(Ir) + d_xz(Ir) + π(C^N)] → [π∗(C^N)]} transition with metal-to-ligand/intra-ligand charge transfer (MLCT/ILCT) characters, and the calculated phosphorescence at 582 nm (1), 607 nm (2), 634 nm (3), 515 nm (4), and 491 nm (5) can be described as originating from the ³{[d_x²-y²(Ir) + d_xz(Ir) + π (C^N)] [π∗(C^N)]} excited state with the ³MLCT/³ILCT characters. The calculated results revealed that the phosphorescent color of these new Ir(III) complexes can be tuned by changing the π-conjugation effect strength of the C^N ligand.     

Effect of ortho-substituents on the stereochemistry of 2-(o-substituted phenyl)-1H-imidazoline-palladium complexes

Palladium complexes composed of [Pd(Ln)₂Cl₂] (n = 1, 2, 3, 4, 6), [L5a]₂[PdCl₄] and [Pd(L5b)₂], where L1 = 4,5-dihydro-2-phenyl-1H-imidazole (=2-phenyl-1H-imidazoline), L2 = 2-(o-fluorophenyl)-1H-imidazoline, L3 = 2-(o-methylphenyl)-1H-imidazoline, L4 = 2-(o-tert-butylphenyl)-1H-imidazoline, L5a = 2-(o-hydroxyphenyl)-1H-imidazolinium, L5b = 2-(1H-imidazolin-2-yl)phenolate, and L6 = 2-(o-methylphenyl)-1H-imidazole, were synthesized. Molecular structures of the isolated palladium complexes were characterized by single crystal X-ray diffraction analysis. The effect of ortho-substituents on the phenyl ring on trans-chlorine geometry was noted for complexes [Pd(L1)₂Cl₂] 1a and 1b, [Pd(L2)₂Cl₂] 2 and [Pd(L6)₂Cl₂] 6, whereas cis-chlorine geometry was observed for [Pd(L3)₂Cl₂] 3 and [Pd(L4)₂Cl₂] 4. PdCl₂ reacts with 2-(o-hydroxyphenyl)-1H-imidazoline in DMF to give [L5a]⁺ and [L5b]^- so that [L5a]₂[PdCl₄] 5a and [Pd(L5b)₂] 5b were obtained. In complex 5b, as an N,O-bidentate ligand, two ligands L5b coordinated with the central Pd(II) ion in the trans-form. The coordination of PdCl₂ with 2-(o-hydroxyphenyl)-1H-imidazolines in solution was investigated by NMR spectroscopy.     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Influence of multidentate N-donor ligands on highly electrophilic zinc initiator for the ring-opening polymerization of epoxides

A set of multidentate ligands have been synthesized and used to stabilize the putative highly electrophilic zinc species initiating ring-opening polymerization (ROP) of cyclohexene oxide (CHO) and propylene oxide (PO). Reaction of the bidentate C₂-chiral bis(oxazoline) ligand (^R2,R3BOX: R₂ = (4S)-tBu, R₃ = H (a); R₂ = (4S)-Ph, R₃ = H (b); R₂ = (4R)-Ph, R₃ = (5S)-Ph (c)) with Zn(R₁)₂ (R₁ = Et (1), Me (2)) led to the heteroleptic three-coordinate complexes (^R2,R3BOX)ZnR₁, 1a-c and 2a, which were isolated in 92-96% yield. Next, two pyridinyl-functionalized N-heterocyclic carbene (NHC) ligands have been designed and synthesized: the 1,3-bis(2-pyridylmethyl)imidazolinium salt (d) and the protected NHC adduct 2-(2,3,4,5,6-pentafluorophenyl)-1,3-bis(2-pyridylmethyl)imidazolidine (e). The reaction of ligands d and e with ZnEt₂ led directly to the formation of (NHC)ZnEt(Cl) 3d complex with ethane elimination and the adduct (NHC-C₆F₅(H))ZnEt₂4e, respectively, in high yield. In situ combinations of selected complexes 1a-c, 3d and 4e with B(C₆F₅)₃ (1 or 2 equivalents) give active systems for ROP, with high productivity (3.3-5.9 10⁶ g_polym. mol_Zn⁻¹ h⁻¹) and high molecular weight (M_n up to 132 10³ g mol⁻¹) for CHO polymerization. Although the in situ B(C₆F₅)₃-activated zinc species were not isolated, the sterically demanding BOX ligands (1c > 1b > 1a) and functionalized NHC ligands seem to enhance the stability of highly electrophilic zinc complexes over ligand redistribution, allowing a better control of the cationic ROP as reflected particularly for 3d and 4e complexes by their respective efficiency (42-88%).     

New universal bipolar host materials with fluorene as non-conjugated bridge for multi-color electrophosphorescent devices

Two novel bipolar hosts (CzFCN2 and CzDFCN) comprising a hole-transport carbazole donor and electron-transport cyano-substituted fluorene acceptor have been synthesized, and their thermal, photophysical, and electrochemical properties were characterized. The non-conjugated linkage between the carbazole donor and the cyano-substituted fluorene acceptor provides excellent thermal/morphological properties and high triplet energies (E_T=2.86 eV) for both CzFCN2 and CzDFCN. These bipolar hosts also exhibited reversible redox behavior, which makes them good candidates for the host material in efficient phosphorescent organic light-emitting diode (PhOLED) devices. Multi-color PhOLED devices incorporating CzFCN2 and CzDFCN as the universal host achieved maximum external quantum efficiencies (η_ext) as high as 10.7, 17.0, 17.2, and 17.6% for blue, green, yellow, and red devices, respectively. In addition, three-component white PhOLEDs (WOLEDs) based on CzFCN2 and CzDFCN as host materials exhibited high color stabilities with η_ext as high as 10.5 and 12.4% and power efficiencies (η_p) of 20.5 and 26.7 lm W⁻¹, respectively.     

Chemiexcitation efficiency for the charge-transfer-induced chemiluminescent decomposition of 3-hydroxyphenyl-substituted dioxetanes in an aqueous system

The decomposition of 3-oxyphenyl-3-methoxy-4-(2′-spiroadamantane)-1,2-dioxetane (A) and 5-tert-butyl-4,4-dimethyl-1-(3-oxyphenyl)bicyclo[3.2.0]heptane (B) in NaOH/H₂O gives light in poor yield, which is several orders of magnitude lower than that in aprotic solvents. To understand the poor chemiluminescence efficiency in NaOH/H₂O, we investigated the behaviors of the authentic emitters, methyl 3-oxidobenzoate (C) and 2,2,4,4-tetramethyl-3-oxopentyl 3-oxidobenzoate (D). We found that D was weakly fluorescent though hydrolyzed in NaOH/H₂O, and estimated that the singlet-chemiexcitation efficiency Φ_S was 6.1 × 10⁻³ for the decomposition of B in NaOH/H₂O. On the other hand, Φ_S for A could not be estimated, since C was hydrolyzed too rapidly to observe its fluorescence.     

Rhodium(I) complexes with κP coordinated ω-phosphinofunctionalized alkyl phenyl sulfide, sulfoxide and sulfone ligands and their reactions with sodium bis(trimethylsilyl)amide and Ag[BF4]

Reactions of ω-diphenylphosphinofunctionalized alkyl phenyl sulfides Ph₂P(CH₂)_nSPh (n = 1, 1a; 2, 2a; 3, 3a), sulfoxides Ph₂P(CH₂)_nS(O)Ph (n = 1, 1b; 2, 2b; 3, 3b) and sulfones Ph₂P(CH₂)_nS(O)₂Ph (n = 1, 1c; 2, 2c; 3, 3c) with dinuclear chlorido bridged rhodium(I) complexes [(RhL₂)₂(μ-Cl)₂] (L₂ = cycloocta-1.5-diene, cod, 4; bis(diphenylphosphino)ethane, dppe, 5) afforded mononuclear Rh(I) complexes of the type [RhCl{Ph₂P(CH₂)_nS(O)_xPh-κP}(cod)]¹ (n/x = 1/0, 6a; 1/1, 6b; 1/2, 6c; 2/0, 8a; 2/1, 8b; 2/2, 8c; 3/0, 10a; 3/1, 10b; 3/2, 10c) and [RhCl{Ph₂P(CH₂)_nS(O)_xPh-κP}(dppe)] (n/x = 1/0, 7a; 1/1, 7b; 1/2, 7c; 2/0, 9a; 2/1, 9b; 2/2, 9c; 3/0, 11a; 3/1, 11b; 3/2, 11c) having the P^S(O)_x ligands κP coordinated. Addition of Ag[BF₄] to complexes 6-11 in CH₂Cl₂ led with precipitation of AgCl to cationic rhodium complexes of the type [Rh{Ph₂P(CH₂)_nS(O)_xPh-κP,κS/O}L₂][BF₄] having bound the P^S(O)_x ligands bidentately in a κP,κS (13a-18a, 15b-18b) or a κP,κO (13b, 14b, 13c-18c) coordination mode. Unexpectedly, the addition of Ag[BF₄] to 6a in THF afforded the trinuclear cationic rhodium(I) complex [Rh₃(μ-Cl)(μ-Ph₂PCH₂SPh-κP:κS)₄][BF₄]₂·4THF (12·4THF) with a four-membered Rh₃Cl ring as basic framework. Addition of sodium bis(trimethylsilyl)amide to complexes 6-11 led to a selective deprotonation of the carbon atom neighbored to the S(O)_x group (α-C) yielding three different types of organorhodium complexes: a) Organorhodium intramolecular coordination compounds of the type [Rh{CH{S(O)_xPh}CH₂CH₂PPh₂-κC,κP}L₂] (22a-c, 23a-c), b) zwitterionic complexes [Rh{Ph₂PCHS(O)_xPh-κP,κS/O}L₂] having κP,κS (21a, 21b) and κP,κO (20b/c, 21c) coordinated anionic [Ph₂PCHS(O)_xPh] ligands, and c) the dinuclear rhodium(I) complex [{Rh{μ-CH(SPh)PPh₂-κC:κP}(cod)}₂] (19). All complexes were fully characterized spectroscopically and complexes 15b, 15c, 12·4THF and 19·THF additionally by X-ray diffraction analysis. DFT calculations of zwitterionic complexes gave insight into the coordination mode of the [Ph₂PCHS(O)Ph] ligand (κP,κS versus κP,κO).     

New cyano-substituted organic dyes containing different electrophilic groups: aggregation-induced emission and large two-photon absorption cross section

Three aggregation-induced emission active dyes (3a–c) were synthesized and their one- and two-photon absorption properties have been investigated. They were all found to be weakly fluorescent in THF solution, while they exhibited dramatic fluorescence enhancement in water/THF mixtures. The solid fluorescence of 3a–c was recorded and their fluorescence quantum efficiency (Φ_F) values were determined to be 8.0%, 8.1%, and 16.4%, respectively. Moreover, the two-photon absorption (2PA) cross-sections (σ) of 3a–c were measured and 3a showed the highest value of 702 GM. The excellent aggregation-induced emission and 2PA properties provide a promising alternative for biophotonic materials.     

Ruthenium piano-stool complexes containing mono- or bidentate pyrrolidinylalkylphosphines and their reactions with small molecules

Ruthenium piano-stool complexes incorporating the new bidentate aminoalkylphosphine ligand 1,2-bis(dipyrrolidin-1-ylphosphino)ethane (dpyrpe, I) or its monodentate counterpart bis(pyrrolidin-1-yl)methylphosphine (pyr₂PMe, II) have been prepared, [(C₅R₅)RuCl(PP)] (R = Me and PP = dpyrpe, 1; R = Me and PP = (pyr₂PMe)₂, 2; R = H and PP = dpyrpe, 3). Complexes 2 and 3 have been characterized by X-ray crystallography. Complexes 1 and 2 react with NaBAr₄^f in the presence of ligand L to yield [Cp^∗Ru(L)(dpyrpe-κ²P)][BAr^f₄] (L = MeCN, 4a; CO, 4b; N₂, 4c) and [Cp^∗Ru(L)(pyr₂PMe)₂][BAr₄^f] (L = MeCN, 5a; CO, 5b; N₂, 5c). Complex 4a was crystallographically characterized. The CO complexes 4b and 5b were examined using IR spectroscopy in an attempt to establish the electron-donating capabilities of I and II. Complex 1 oxidatively adds H₂ in the presence of NaBAr₄^f to yield the Ru(IV) dihydride [Cp^∗RuH₂(dpyrpe-κ²P)][BAr₄^f], 7.     

Microwave synthesis of bis(tetrazolato)-Pd complexes with PPh3 and water-soluble 1,3,5-triaza-7-phosphaadamantane (PTA). The first example of C-CN bond cleavage of propionitrile by a Pd Centre

[2 + 3] Cycloaddition reactions of the di(azido)-Pd^II complex trans-[Pd(N₃)₂(PPh₃)₂] (1) with an organonitrile RCN (2), under heating for 12 h, give the bis(tetrazolato) complexes trans-[Pd(N₄CR)₂(PPh₃)₂] (3) [R = Me (3a), Ph (3b), 4-ClC₆H₄ (3c), 4-FC₆H₄ (3d), 2-NC₅H₄ (3e), 3-NC₅H₄ (3f), 4-NC₅H₄ (3g)]. The reaction of trans-[Pd(N₃)₂(PPh₃)₂] (1) with propionitrile (2h) also affords, apart from trans-[Pd(N₄CEt)₂(PPh₃)₂] (3h), the unexpected mixed cyano-tetrazolato complex trans-[Pd(CN)(N₄CEt)(PPh₃)₂] (3h′) which is derived from the reaction of the bis(tetrazolato) 3h with propionitrile, with concomitant formation of 5-ethyl-1H-tetrazole, via a suggested unusual oxidative addition of the nitrile to Pd^II. The [2 + 3] cycloadditions of [Pd(N₃)₂(PTA)₂] (4) (PTA = 1,3,5-triaza-7-phosphaadamantane) with RCN (2), under heating for 12 h, give the bis(tetrazolato) complexes trans-[Pd(N₄CR)₂(PTA)₂] (5) [R = Ph (5a), 2-NC₅H₄ (5b), 3-NC₅H₄ (5c), 4-NC₅H₄ (5d)]. All these reactions are greatly accelerated by microwave irradiation (1 h, 125 °C, 300 W). Taking advantage of the hydro-solubility of PTA, a simple liberation of 5-phenyl-1H-tetrazole from the coordination sphere of trans-[Pd(N₄CPh)₂(PTA)₂] (5a) was achieved. The complexes were characterized by IR, ¹H, ¹³C{¹H} and ³¹P{¹H} NMR spectroscopies, ESI⁺-MS, elemental analyses and, for 3b, also by X-ray structure analysis. Weak agostic interactions between the CH groups of the triphenylphosphines and the palladium(II) centre were found.     

Neutral penta-coordinated diorganotin(IV) complexes derived from ortho-aminophenol Schiff bases: Synthesis, characterization and molecular structures

The one pot reactions carried among ortho-aminophenol, R₂SnO (R = Me or Ph) and acetyl acetone, 2-hydroxyacetophenone and 2-hydroxy-3-methylacetophenone led to six new diorganotin(IV) compounds Me₂SnL1 (1), Ph₂SnL1 (2), Me₂SnL2 (3) Ph₂SnL2 (4), Me₂SnL3 (5) and Ph₂SnL3 (6) (H2L1 = 2-(3-hydroxy-1-methyl-but-2-enylideneamino)-phenol, H2L2 and H2L3 = 2-[1-(2-hydroxyaryl)alkylideneamino]-phenol) in good yields. Combination of IR, ¹H, ¹³C and ¹¹⁹Sn NMR and X-ray diffraction techniques along with elemental analyses evidenced the formation of penta-coordinated monomeric species. The crystal structures of ligand H2L1 and complexes 1, 3 and 4 were determined by single crystal X-ray diffraction study. In the solid state, the ligand H2L1 exists as keto-enamine tautomeric form. There are N-H…O intra-molecular hydrogen bonds between amine and carbonyl groups. Diorganotin(IV) complexes 1, 3 and 4 are monomers with TBP (trigonal bipyramidal) geometry surrounding the tin atom. The O, N, O- tridentate ligand places its two oxygen donating atoms in the axial positions, and the nitrogen atom occupies one equatorial position. The two R groups attached to tin occupy the other two equatorial positions. The solution structures were predicted by ¹¹⁹Sn NMR spectroscopy.     

Hydroxy- and boronic-acid-functionalized carbosilanes: Synthesis and solid state structure of Si(C6H4-4-SiMe2((CH2)3OH))4

Consecutive synthesis methodologies for the preparation of carbosilanes (Ph)(Me)Si((CH₂)₃B(OH)₂)₂ (2), Si(C₆H₄-4-SiMe₂((CH₂)₃B(OH)₂))₄ (5), (Ph)(Me)Si((CH₂)₃OH)₂ (3), and Si(C₆H₄-4-SiMe_3−n((CH₂)₃OH)_n)₄ (6a, n = 1; 6b, n = 2; 6c, n = 3) are reported. Boronic acids 2 and 5 are accessible by treatment of (Ph)(Me)Si(CH₂CHCH₂)₂ (1) or Si(C₆H₄-4-SiMe₂(CH₂CHCH₂))₄ (4a) with HBBr₂·SMe₂ followed by addition of water, while 3 and 6 are available by the hydroboration of 1 or Si(C₆H₄-4-SiMe_3−n(CH₂CHCH₂)_n)₄ (4a, n = 1; 4b, n = 2; 4c, n = 3) with H₃B·SMe₂ and subsequent oxidation with H₂O₂.The single molecular structure of 6a in the solid state is reported. Representative is that 6a crystallized in the chiral non-centrosymmetric space group P2₁2₁2₁ forming 2D layers due to intermolecular hydrogen bond formation of the HO functionalities along the crystallographic a and c axes.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.