New receptors for anions in water: Synthesis, characterization, X-ray structures of new derivatives of 5,11,17,23-tetraamino-25,26,27,28-tetrapropyloxycalix[4]arene

Syntheses and characterization of ten new compounds from the calixarene family, cone - 5,11,17,23- tetrakis(2-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4a; cone - 5,11,17,23-tetrakis(3-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4b; cone - 5,11,17,23-tetrakis(4-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4c; cone - 5,11,17,23-tetrakis(ferrocenylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4d; cone - 5,11,17,23-tetrakis(2-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3a; cone - 5,11,17,23-tetrakis(3-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3b; cone - 5,11,17,23-tetrakis(4-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3c; cone - 5,11,17,23-tetrakis(ferrocenylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3d; cone - 5,11,17,23-tetrakis(2-thienylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3e and cone - 5,11,17,23-tetrakis(2-pyrrolylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3f are reported. The target compounds 4a-4d were designed to form complexes with anions based on hydrogen bonds and electrostatic interactions in acidic aqueous solutions and the interaction constant 1770 mol⁻¹ dm³ of a 1:1 complex was obtained for the interaction of 4c with sulfate anion in 5 × 10⁻³ M aqueous HCl. The solid state structures of the compounds 3b, 3e and 3f were determined, their stereochemistry and the stereochemistry of the calix[4]arene frame is generally discussed. Raman, infrared and UV-vis spectra of the target compounds and some intermediates are reported, too.     

Functionalisation of the upper rim of calix[4]arene via alcoholysis and hydrosilylation reactions

Metalation of 5,17-dibromo-25,26,27,28-tetra propoxy calix[4]arene (1) with n-BuLi in THF at −78 °C gave organolithium reagent, which reacted with Me₂HSiCl to give 5,17-bis(dimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (2). The Si-H groups of calixarene 2 were treated with methanol, ethanol, propanol, butanol, pentanol, hexanol, 2-propanol and 2-methyl propanol in the presence of Karstedt catalyst (platinum(0)-1,3-divinyl-1,1,3,3-tetramethyl disiloxane complex, solution in xylene) to give the corresponding 5,17-bis(alkoxydimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (3). Moreover, calixarene 2 was easily functionalized with a variety of alkenes using Karstedt catalyst to give the corresponding organosilylated calix[4]arene (4).     

Complexation thermodynamics of water-soluble calix[4]arene derivatives with lanthanoid(III) nitrates in acidic aqueous solution

Microcalorimetric titrations have been performed in acidic aqueous solution at 25 °C to calculate the complex stability constants (K_S) and thermodynamic parameters (ΔG°, ΔH°, and TΔS°) for the stoichiometric 1:1 complexation of lanthanoid(III) nitrates (La-Gd, Tb) with 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(hydroxycarbonylmethoxy)calix[4]arene (2) and 5,11,17,23-tetrasulfonato-thiacalix[4]arene (3). Using the present and previous reported data on water-soluble calix[4]arenesulfonates (1) and structurally related analogues 2 and 3, the complexation behavior is discussed comparatively from the thermodynamic point of view. Possessing four carboxyls at the lower rim of parent calix[4]arenesulfonate (1), the derivative 2 displays the enhanced binding abilities for Sm³⁺. As compared with 1 and 2, p-sulfonatothiacalix[4]arene (3) gives not only the lower binding constants for all of lanthanoid(III) ions but also lower cations selectivity. Thermodynamically, the resulting complexes of lanthanoid(III) ions with 1 and its derivatives 2 and 3 is absolutely entropy-driven in aqueous solution, typically showing larger positive entropy changes. These larger positive entropy changes (TΔS°) and somewhat smaller positive enthalpy changes (ΔH°) are directly contributed to the complexes stability as a compensative consequence.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Synthesis, structure and property of three divalent metal complexes of the piperidinoacetyl-containing calix[4]arene

Three new mononuclear complexes [Cd(L)](ClO₄)₂·4(MeCN) (1) (L?=?5,11,17,23-tetra-t-butyl-25,26,27,28-tetrakis(piperidinocarbonylmethoxy)calix[4]arene), [Zn(L)](ClO₄)₂·4(MeCN)·CH₂Cl₂ (2), [Cu(L)](ClO₄)₂·3(MeCN)·Et₂O (3) have been synthesized and characterized by elemental analysis and X-ray single crystal diffraction (CCDC: 838342, 838343 and 838344). The results of the crystal structural analyses show that calix[4]arene backbones in 1, 2, 3 are fixed in the cone conformation while the divalent metal cations (Cd, Zn and Cu) are coordinated with the discrepant geometry. The cadmium ion in 1 is eight-coordinated with four carbonyl oxygen atoms and four ethereal oxygen atoms in the low rim of calix[4]arene, whereas zinc ion in 2 and copper ion in 1 are four-coordinated with the acyl oxygen atoms. The atomic net charges distribution and frontier molecular orbital energies were obtained by Gaussian 98 program with DFT method at B3LYP/lanl2dz level. Furthermore, the SOD-like activities of 3 were measured by xanthine/xanthine oxidase-NBT assay at pH 7.2 and 7.8.     

CMPO-substituted calix[6]- and calix[8]arene extractants for the separation of An/Ln from radioactive waste

Three calix[6]arene derivatives (1a-c) and two calix[8]arene derivatives (2a,b), with six and eight CMPO residues, respectively, attached to the narrow/lower rim via ether links, were synthesised. Preliminary liquid-liquid extraction studies for Eu(III) and Am(III) from aqueous nitric acid to o-nitrophenylhexyl ether reveal remarkable properties with respect to efficiency and selectivity, especially for the tert-butylcalix[6]arene derivative with a -(CH₂)₃- spacer.     

Synthesis, characterization and electrochemical properties of two new calix[4]arene derivatives bearing two ferrocene imine or ferrocene amine units at the upper rim

A novel calix[4]arene derivative with two ferrocenyl Schiff-base groups at the upper rim 3 has been synthesized from 5,17-diformyl-25,27-dipropoxy-26,28-dihydroxy calix[4]arene and 4-ferrocenylaniline via condensation reaction. Reduction of 3 with sodium borohydride led to calix[4]arene derivative 4 with two amino ferrocenyl groups at the upper rim. The ferrocenyl Schiff-base calix[4]arene and its corresponding reduced amine have been purified and characterized by elemental analysis,¹H NMR, FTIR, Mass and UV-vis spectral data. Electrochemical properties of compounds 3 and 4 have been investigated. Cyclic voltammograms of 3 and 4 show reversible redox couples of ferrocene/ferrocinium at E_1/2=0.401 V and 0.346 V, respectively. Electrochemical studies show these redox active compounds electrochemically recognize trivalent lanthanides La³⁺ and Ce³⁺ and divalent Pb²⁺ and Cu²⁺cations. With ferrocenyl Schiff-base calix[4]arene 3 an anodic shift as large as 130 mV is observed on addition of one equivalent of Ce³⁺ ion. Also extraction properties of compound 4 towards some metal cations have been described. It has been observed that compound 4 has a good selectivity for metal cations Fe³⁺, Cu²⁺, Pb²⁺ and Cd²⁺ against Ni²⁺ and Co²⁺.     

Formation of upper rim acylated calix[4]arenes using a sacrificial zinc anode

A straightforward electrosynthetic method is described, which allows upper rim acylation of non-p-halogenated calix[4]arenes. For example, a solution of tetrapropoxycalix[4]arene 4 was electrolysed in the presence of ZnBr₂ in an undivided cell fitted with a sacrificial zinc anode using pure acetonitrile as solvent, yielding an organozinc species, which was then treated with acetyl chloride in the presence of a palladium catalyst to afford 5,11-diacetyl-25,26,27,28-tetrapropoxycalix[4]arene 5 in ca. 35% yield after workup.     

Synthesis of di-substituted calix[4]arene-based receptors for extraction of chromate and arsenate anions

The article describes the synthesis of a family of novel calix[4]arene ionophores, 25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5a), 25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5b) and two chromogenic calix[4]arenes, 5,17-dinitro-25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5c), 5,17-dinitro-25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5d) bearing pyridinium units. In the synthesis, the upper and lower rims of p-tert-butylcalix[4]arene were modified in order to acquire binding sites for the recognition of arsenate and dichromate anions. It has been observed that protonated alkylammonium forms of the ionophores showed high affinity toward dichromate and arsenate anions.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Azobenzene-bridged calix[8]arenes

An azobenzene bridge was introduced into the lower (or smaller) rim of p-tert-butylcalix[8]arene (1) and 1,5-calix[8]crown-3 (2) to form 1,4-singly bridged (3) and 1,5:3,7-doubly bridged (4) calix[8]arene derivatives, respectively. Trans and cis isomers of conformationally rigid 4 were isolated. The quantum yields of the trans-cis photoisomerisation reactions have been measured.     

Di- and tetracarboxylate ligands for highly luminescent terbium(III) complexes on the basis of sulfonylcalix[4]arene scaffold

New di- (2) and tetracarboxylate ligands (4) were prepared on a sulfonylcalix[4]arene platform by O-alkylation of thiacalix[4]arene with ethyl bromoacetate, followed by hydrolysis of the ester function and oxidation of the sulfide bridges. The sulfonyl-based ligands 2 and 4 formed luminescent 1:1 complexes with terbium(III) ion having higher luminescent quantum yield (Φ = 0.29₁ and 0.28₇, respectively) than 1:1 complexes of the corresponding thiacalix[4]arene-based di- (1) and tetracarboxylate ligands (3) (Φ = 0.03₈ and 0.00₃, respectively), implying higher efficiency of sulfonyl ligands (2 and 4) than those of thia ligands (1 and 3) in the energy transfer process.     

Syntheses of two diamine substituted 1,3-distal calix[4]arene-based magnetite nanoparticles for extraction of dichromate, arsenate and uranyl ions

The synthesis of two new calixarene derivatives 4 and 5, functionalized at the lower rim with 4-amino-1-benzylpiperidine to give diamide and diamine derivatives of p-tert-butylcalix[4]arene, is described. They were obtained by the reaction of both the diester derivative of p-tert-butylcalix[4]arene (2) and the dialkyl bromide derivative of p-tert-butylcalix[4]arene (3) with 4-amino-1-benzylpiperidine. The ¹H NMR spectra of calixarene derivatives show that 4 and 5 exist in the cone conformation. Moreover, these diamide and diamine derivatives of p-tert-butylcalix[4]arene (4 and 5) have been immobilized onto [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane-modified Fe₃O₄ magnetite nanoparticles to obtain calixarene-based magnetic nanoparticles M-DADBP-Calix (6) and M-DABP-Calix (7). The calix[4]arene immobilized materials were characterized by a combination of Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and Thermogravimetric Analyses (TGA) and elemental analysis. Additionally, the studies regarding the removal of As(V)/Cr(VI) ions as well as U(VI) ion from aqueous solutions were also carried out by using these compounds in liquid-liquid/solid-liquid extraction experiments.     

Capping the upper and lower rims of calix[4]arenes by aryl dinitrile oxide reactions

1,3-Dipolar cycloadditions of upper- and lower-rim diallylcalix[4]arenes (1 and 3) with aryl dinitrile oxides provide a unique and efficient way of capping the calix[4]arenes. When dinitrile oxides reacted with 5-allylcalix[4]arene 7, they underwent a 1,3-dipolar cycloaddition on one side and an electrophilic substitution on the other side, which led to a novel type of asymmetric calix[4]arenes (9 and 12).     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Synthesis of new imines and amines containing organosilicon groups

The Peterson olefination reaction of terephthalaldehyde with tris(trimethylsilyl)methyl lithium, (Me₃Si)₃CLi, in THF at 0 °C gives 4-[2,2-bis(trimethylsilyl)ethenyl]benzaldehyde (1) and 4,4-bis[2,2-bis(trimethylsilyl)ethenyl]benzene (2). The new aldehyde (1) reacts with variety of amines in ethanol to afford the corresponding imines (3) containing vinylbis(trimethylsilyl) group. The newly synthesized imines (3) can be completely converted into amines containing vinylbis(trimethylsilyl) group with an excess amount of NaBH₄. In the case of N-[4-(2,2-bis(trimethylsilyl)ethenyl)benzyl]-2,6-dimethylaniline LiAlH₄ was used as a reducing agent in THF.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Structure and solution dynamics of a “P–N–P” ligand attached to calix[4]arene scaffold and its palladium dichloride complex

A new diphosphazane ligand, Ph₂PN(CHMe₂)P(Ph){1,3-dimethoxycalix[4]arene} (2), in which the P–N–P unit is appended to calix[4]arene backbone, and its PdCl₂ complex (3) have been synthesized. The structures of the conformers of both the compounds in solution have been elucidated with the help of two-dimensional NMR experiments. Single crystal X-ray diffraction studies reveal the partial cone and cone conformations of the calixarene unit in the ligand (2) and the Pd-complex (3), respectively.     

Diester intrabridging of p-tert-butylcalix[8]arene and unexpected formation of the monospirodienone derivative

Reaction of p-tert-butylcalix[8]arene 1 with adipoyl chloride in the presence of NaH as the base yielded singly and doubly intrabridged esters 2-4 and 6. Surprisingly, calix[8]arene monospirodienone derivative 7 was also isolated, which was originated by O₂ oxidation. The conditions of this oxidation were optimized leading to a novel synthetic approach to calixarene monospirodienones based on the O₂/NaH/acyl-chloride oxidizing system. Xantheno calix[8]arenes 8-8a were obtained by rearrangement of 7.     

Potentiometric evaluation of calix[4]arene anion receptors in membrane electrodes: phosphate detection

Ion-selective membrane electrodes doped with the urea- or thiourea-functionalised calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-N′-(phenylureido)butyl]oxy]-26,28-dipropoxy calix[4]arene (I) and 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-(N′-phenylthioureido)-butyl]oxy]-26,28-dipropoxy calix[4]arene (II), were evaluated for anion sensing. Potentiometric results show that these calixarene ionophore-based membrane electrodes exhibit a good sensitivity to aqueous solutions of the monohydrogen orthophosphate species HPO₄²⁻ in the concentration range 5.0 × 10⁻⁵ to 1.0 × 10⁻¹ M, with near-Nernstian response slopes of −33.0 and −28.0 mV dec⁻¹ for ionophores I and II, respectively. Selectivity coefficient values for monohydrogen orthophosphate over a range of common anions were determined by the fixed interference and matched potential methods and indicated that these membrane electrodes exhibit a good selectivity for HPO₄²⁻ with respect to the other anions, including sulfate and nitrate.