Semiconductor nanoparticles for photoinitiation of free radical polymerization in aqueous and organic media

Photoinduced free radical polymerization of vinyl monomers by using semiconductor inorganic nanoparticles (NPs) is investigated. Zinc oxide and iron‐doped zinc oxide were used as photosensitive compounds to initiate the polymerization of acrylamide as a water‐soluble monomer in aqueous environment and methyl methacrylate as an oil‐soluble monomer in organic media under UV‐light irradiation. The method uses photochemically generated electrons and holes from the NPs to form initiating hydroxyl radicals in aqueous media, while tertiary amines and iodonium salt served as coinitiator in organic media. The initiation mechanism in organic media involves hydrogen abstraction or reduction processes via charge carriers, respectively. The kinetic of the polymerization in both environments was studied by means of a photo‐differential scanning calorimetry. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1500–1507     

Free‐radical polymerization of dioxolane and dioxane derivatives: Effect of fluorine substituents on the ring opening polymerization

Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004     

Synergistic interaction of epoxides and N‐vinylcarbazole during photoinitiated cationic polymerization

A kinetic study was conducted of the independent photoinitiated cationic polymerization of a number of epoxide monomers and mixtures of these monomers with N‐vinylcarbazole. The results show that these two different classes of monomers undergo complex synergistic interactions with one another during polymerization. It was demonstrated that N‐vinylcarbazole as well as other carbazoles are efficient photosensitizers for the photolysis of both diaryliodonium and triarylsulfonium salt photoinitiators. In the presence of large amounts of N‐vinylcarbazole, the rates of the cationic ring‐opening photopolymerization of epoxides are markedly accelerated. This effect has been ascribed to a photoinitiated free‐radical chain reaction that results in the oxidation of monomeric and polymeric N‐vinylcarbazole radicals by the onium salt photoinitiators to generate cations. These cations can initiate the ring‐opening polymerization of the epoxides, leading to the production of copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3697–3709, 2000     

The influence of a radical structure on the kinetics of photopolymerization

A radical initiation ability of new initiating systems in photopolymerization of 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate has been investigated and presented. The evaluation of alkyltriphenyl‐ and tetraalkylborates, iodonium salts, N‐alkoxypyridinium salts, maleimides, phthalimides, 1,3,5‐triazine derivatives and others as a free radical source in combination with suitable photosensitizer for radical polymerization of triacrylate is described. It is assumed that the photochemical decomposition of a coinitiator molecule results in formation of free radicals, which further initiate polymerization. The order of activity of free radical sources on kinetic of photopolymerization was also presented. Different initiator activity can be explained by the difference in the decomposition rate constant and the reactivity of radicals formed toward the double bond of monomer. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1575–1589     

Key Role of Intramolecular Metal Chelation and Hydrogen Bonding in the Cobalt‐Mediated Radical Polymerization of N‐Vinyl Amides

This work reveals the preponderance of an intramolecular metal chelation phenomenon in a controlled radical polymerization system involving the reversible trapping of the radical chains by a cobalt complex bis(acetylacetonato)cobalt(II). The cobalt‐mediated radical polymerization (CMRP) of a series of N‐vinyl amides was considered with the aim of studying the effect of the cobalt chelation by the amide moiety of the last monomer unit of the chain. The latter reinforces the cobalt? polymer bond in the order N‐vinylpyrrolidone<N‐vinyl caprolactam<N‐methyl‐N‐vinyl acetamide, and is responsible for the optimal control of the polymerizations observed for the last two monomers. Such a double linkage between the controlling agent and the polymer, through a covalent bond and a dative bond, is unique in the field of controlled radical polymerization and represents a powerful opportunity to fine tune the equilibrium between latent and free radicals. Possible hydrogen bond formation is also taken into account in the case of N‐vinyl acetamide and N‐vinyl formamide. These results are essential for understanding the factors influencing Co? C bond strength in general, and the CMRP mechanism in particular, but also for developing a powerful platform for the synthesis of new precision poly(N‐vinyl amide) materials, which are an important class of polymers that sustain numerous applications today.     

Blue LED light‐sensitive benzo pyrazolo (or imidazo) isoquinolinone derivatives in high‐performance photoinitiating systems for polymerization reactions

Isoquinolinone derivatives (IQ) have been synthesized and combined with different additives (an amine, 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine, an iodonium salt, or N‐vinylcarbazole) to produce reactive species (i.e. radicals and cations) being able to initiate the radical polymerization of acrylates, the cationic polymerization of epoxides, the thiol‐ene polymerization of trifunctional thiol/divinylether, and the synthesis of epoxide/acrylate interpenetrated polymer network IPN upon exposure to very soft polychromatic visible lights, blue laser diode or blue LED lights. Compared with the use of camphorquinone based systems, the novel combinations employed here ensures higher monomer conversions (～50–60% vs. ～15–35%) and better polymerization rates in radical polymerization. The chemical mechanisms are studied by steady‐state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin trapping techniques. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 567–575     

Emulsion copolymerization of vinyl acetate and butyl acrylate in the presence of fluorescent dyes

This article describes our first experiments for preparing dye‐labeled latex particles by the emulsion copolymerization of a 4/1 (w/w) mixture of vinyl acetate‐butylacrylate (VAc‐BA). We discuss the synthesis of acrylate derivatives of phenanthrene, anthracene, and pyrene [9‐acryloxymethyl phenanthrene ( 7 ), 9‐acryloxymethyl‐10‐methyl anthracene ( 8 ), and 1‐acryloxymethyl pyrene ( 10 )] and an allyl ether derivative of anthracene [9‐allyoxymethyl‐10‐methyl anthracene ( 9 )]. Although the phenanthrene derivative 7 gave latex particles with high monomer conversion and good dye incorporation, the pyrene acrylate and both anthracene comonomers strongly inhibited the free‐radical reaction. To assist our search for a dye that would serve as a useful energy acceptor for phenanthrene and without suppressing VAc‐BA polymerization, we also examined batch emulsion polymerization in the presence of a variety of dye derivatives—substituted anthracenes, acridines, a coumarin, and two benzophenone derivatives. All of the anthracene derivatives, as well as acridine, strongly inhibited monomer polymerization. The coumarin dye 7‐hydroxy‐4‐methyl coumarin ( 22 ) that had only limited solubility allowed more than 90% monomer conversion. Most promising were 2‐hydroxy‐5‐methyl benzophenone ( 23 ) and 4‐N,N‐dimethylamino benzophenone ( 24 ) that at 1 mol % in the monomer mixture permitted virtually quantitative monomer conversion to latex. 4′‐Dimethylamino‐2‐acryloxy‐5‐methyl benzophenone ( 25 ) copolymerized well with the VAc‐BA mixture, yielding latex particles in high yield and with a narrow size distribution. These dyes appear to be useful acceptor dyes for energy‐transfer experiments with phenanthrene. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1594–1607, 2002     

Cyanoxyl‐mediated free‐radical polymerization of acrylic acid: Its scope and limitations

This work examines the scope and limitations of the cyanoxyl (^·OC?N)‐mediated free‐radical polymerization of acrylic acid (AA) with respect to the criteria of livingness. Cyanoxyl persistent radicals were generated in situ through the reaction between arenediazonium salts (X? C₆H₄N?N^⊕BF, where X is H, OCH₃, Cl, or NO₂) and sodium cyanate (NaOCN). This article thoroughly discusses the role played by such oxygen‐centered radicals in the polymerization process; it particularly focuses on the influence of the concentration and nature of the diazonium salt, the solvent, and the temperature on features such as the variations of ln([M]₀/[M]) versus time (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration), the number‐average molar mass versus conversion, and the polydispersity versus conversion in cyanoxyl‐mediated free‐radical polymerizations of AA. Cyanoxyl‐terminated samples were used as macroinitiators for the polymerization of methyl methacrylate to generate poly(acrylic acid)‐b‐poly(methyl methacrylate) block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 519–533, 2005     

Synthesis and polymerization of 5‐(methacrylamido)tetrazole,a water‐soluble acidic monomer

The reaction of methacryloyl chloride with 5‐aminotetrazole gave the polymerizable methacrylamide derivative 5‐(methacrylamido)tetrazole ( 4 ) in one step. The monomer had an acidic tetrazole group with a pK_a value of 4.50 ± 0.01 in water methanol (2:1). Radical polymerization proceeded smoothly in dimethyl formamide or, after the conversion of monomer 4 into sodium salt 4‐Na , even in water. A superabsorbent polymer gel was obtained by the copolymerization of 4‐Na and 0.08 mol % N,N′‐methylenebisacrylamide. Its water absorbency was about 200 g of water/g of polymer, although the extractable sol content of the gel turned out to be high. The consumption of 4‐Na and acrylamide (as a model compound for the crosslinker) during a radical polymerization at 57 °C in D₂O was followed by ¹H NMR spectroscopy. Fitting the changes in the monomer concentration to the integrated form of the copolymerization equation gave the reactivity ratios r _4‐Na = 1.10 ± 0.05 and r_acrylamide = 0.45 ± 0.02, which did not differ much from those of an ideal copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4333–4343, 2002     

Bulk atom transfer radical polymerization of allyl methacrylate

A detailed investigation of the polymerization of allyl methacrylate, a typical unsymmetrical divinyl compound containing two types of vinyl groups, methacryloyl and allyl, with quite different reactivities, was performed with atom transfer radical polymerization (ATRP). Homopolymerizations were carried out in bulk, with ethyl‐2‐bromoisobutyrate as the initiator and with copper halide (CuX, where X is Cl or Br) with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Kinetic studies demonstrated that during the early stages of the polymerization, the ATRP process proceeded in a living manner with a low and constant radical concentration. However, as the reaction continued, the increased diffusion resistance restricted the mobility of the catalyst system and interrupted the equilibrium between the growing radicals and dormant species. The obtained poly(allyl methacrylate)s (PAMAs) were characterized with Fourier transform infrared, ¹H NMR, and size exclusion chromatography techniques. The dependence of both the gel point conversion and molecular characteristics of the PAMA prepolymers on different experimental parameters, such as the initiator concentration, polymerization temperature, and type of halide used as the catalyst, was analyzed. These real gel points were compared with the ones calculated according to Gordon's equation under the tentative assumption of equal reactivity for the two types of vinyl groups. Moreover, the microstructure of the prepolymers was the same as that exhibited by those homopolymers prepared by conventional free‐radical polymerization; the fraction of syndiotactic arrangements increased as the reaction temperature was lowered. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2395–2406, 2005     

Synthesis and reaction of β‐hydroxyaspartic acid‐based polymethacrylate

O‐Methacryloyl‐N‐(tert‐butoxycarbonyl)‐β‐hydroxyaspartic acid dimethyl ester was synthesized by methyl esterification of β‐hydroxyaspartic acid, followed by protection of the amino group with the tert‐butoxycarbonyl group and then the reaction of the hydroxyl group with methacryloyl chloride. The monomer efficiently underwent radical polymerization to afford the corresponding polymer with a number‐average molecular weight of 42,000 in good yields. The alkaline hydrolysis of the polymer occurred not only at the methyl ester but also at the ester moiety between the main and side chains of the polymer. The methyl ester‐free polymer gradually released β‐hydroxyaspartic acid moiety in a phosphate buffer solution with pH = 7.3 and 7.8. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2782–2788, 2002     

Poly(methyl methacrylate)‐block‐poly(N‐vinyl pyrrolidone) diblock copolymer: A facile synthesis via sequential radical polymerization mediated by isopropylxanthic disulfide and its nanostructuring polybenzoxazine thermosets

In this contribution, we reported a facile synthesis of poly(methyl methacrylate)‐block‐poly(N‐vinyl pyrrolidone) (PMMA‐b‐PVPy) diblock copolymers via sequential radical polymerizations mediated by isopropylxanthic disulfide (DIP). It was found that the radical polymerization of N‐vinyl pyrrolidone (NVP) mediated by DIP was in a controlled and living manner. In contrast, the polymerization of methyl methacrylate mediated by DIP displayed the behavior of telomerization, affording xanthate‐terminated PMMA with a good control of molecular weights while the conversion of monomer was not very high. The xanthate‐terminated PMMA can be successfully used as the macromolecular chain transfer agent for the polymerization of NVP via RAFT/MADIX process and thus PMMA‐b‐PVPy diblock copolymers can be successfully synthesized via sequential radical polymerization mediated by isopropylxanthic disulfide. One of these diblock copolymers was incorporated into polybenzoxazine and the nanostructured thermosets were obtained as evidenced by transmission electron microscopy, small angle X‐ray scattering, and dynamic mechanical thermal analysis. The formation of nanostructures in polybenzoxazine thermosets was ascribed to a reaction‐induced microphase separation mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 952–962     

Universal xanthate‐mediated controlled free radical polymerizations of the “less activated” vinyl monomers

The living free radical polymerizations of three “less activated” monomers (LAMs), vinyl acetate, N‐vinylcarbazole, and N‐vinylpyrrolidone, were successfully achieved in the presence of a disulfide, isopropylxanthic disulfide (DIP), using 2,2′‐azoisobutyronitrile (AIBN) as the initiator. The living behaviors of polymerizations of LAMs are evidenced by first‐order kinetic plots and linear increase of molecular weights (M_ns) of the polymers with monomer conversions, while keeping the relatively low molecular weight distributions, respectively. The effects of reaction temperatures and molar ratios of components on the polymerization were also investigated in detail. The polymerization proceeded with macromolecular design via interchange of xanthate process, where xanthate formed in situ from reaction of AIBN and DIP. The architectures of the polymers obtained were characterized by GPC, ¹H NMR, UV–vis, and MALDI‐TOF‐MS spectra, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

The synthesis and cationic photopolymerization of monomers based on dicyclopentadiene

Several new epoxide monomers based on dicyclopentadiene (DCPD) were prepared using straightforward reaction chemistry. Those monomer-bearing groups in addition to the epoxy moiety, which can stabilize free radicals, display a pronounced acceleration of the rate of cationic ring-opening polymerization in the presence of diaryliodonium salt photoinitiators. Mechanistic studies conducted with the aid of model compounds have shown that the apparent rate acceleration is due to the free radical chain-induced decomposition of the photoinitiator. One of the chain carriers in this reaction involves a monomer-derived free radical. Also prepared was dicyclopentadiene monomer (V) bearing polymerizable epoxide and 1-propenyl ether groups in the same molecule. The functional groups in V appear to undergo independent vinyl and epoxide ring-opening polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3427–3440, 1999     

Radical polymerization of diallylamine compounds: From quantum chemical modeling to controllable synthesis of high‐molecular‐weight polymers

We investigated the possibility to obtain high‐molecular‐weight (HMW) polymers from the monomers of the diallylamine (DAA) series using quantum chemical and experimental methods. Such monomers are known to polymerize into oligomeric products due to the reaction of the degradative chain transfer to the monomer. We studied potential energy profiles of the chain propagation and competing chain transfer reactions, viz., the free radical double bond addition and α‐hydrogen radical abstraction, respectively, for a number of polymerization processes. Calculations were carried in the framework of the polarized continuum solvent model utilizing the procedure based on the semiempirical MNDO‐PM3 background. It was found that the necessary condition for decreasing competitiveness of the chain transfer to the monomer is the availability of monomer molecules in only protonated form in the polymerizing system. Using these results, we developed the strategy for obtaining HMW polymers based on said monomers. We synthesized a monomer system (the equimolar salt of N,N‐diallyl‐N‐methylamine and trifluoroacetic acid) that fully corresponds to such requirements. Novel HMW polymers were then synthesized by radical polymerization of this salt at soft conditions. We established that chain termination is controlled by the bimolecular mechanism. We showed that the degradative chain transfer transforms into the effective chain transfer. The mechanisms of the observed phenomena are discussed. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Solvent‐free free‐radical frontal polymerization: A new approach to quickly synthesize poly(N‐vinylpyrrolidone)

The first synthesis of poly(N‐vinylpyrrolidone) without solvent by free‐radical frontal polymerization at ambient pressure is reported. The appropriate amounts of two reactants N‐vinyl‐2‐pyrrolidone (NVP) and initiator 2,2′‐azobis‐isobutyronitrile (AIBN) without solvent were mixed together at ambient temperature. Frontal polymerization was initiated by heating the wall of the tube with a soldering iron, and the resultant hot fronts were allowed to self‐propagate throughout the reaction vessel. Once initiated, no further energy was required for polymerization to occur. To suppress the fingers of molten monomer, a small amount of nanosilica was added. The dependence of the front velocity and front temperature on the AIBN concentration was thoroughly investigated. The as‐prepared polymers were characterized by gel permeation chromatography (GPC) and thermogravimetric analysis (TGA). Results show that without postpolymerization solvent removal, waste production can be reduced. Solvent‐free FP could be exploited as a means for preparation of PVP with the potential advantage of higher throughput than solvent‐based methods. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2177–2185, 2008     

2,2,2‐trifluoroacetophenone‐based D‐π‐A type photoinitiators for radical and cationic photopolymerizations under near‐UV and visible LEDs

Two D‐π‐A‐type 2,2,2‐trifluoroacetophenone derivatives, namely, 4′‐(4‐( N,N‐diphenyl)amino‐phenyl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Ben) and 4′‐(4‐(7‐(N,N‐diphenylamino)‐9,9‐dimethyl‐9H‐fluoren‐2‐yl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Flu), are developed as high‐performance photoinitiators combined with an amine or an iodonium salt for both the free‐radical polymerization of acrylates and the cationic polymerization of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 450 nm). The photochemical mechanisms are investigated by UV‐Vis spectra, molecular‐orbital calculations, fluorescence, cyclic voltammetry, photolysis, and electron‐spin‐resonance spin‐trapping techniques. Compared with 2,2,2‐trifluoroacetophenone, both photoinitiators exhibit larger redshift of the absorption spectra and higher molar‐extinction coefficients. PI‐Ben and PI‐Flu themselves can produce free radicals to initiate the polymerization of acrylate without any added hydrogen donor. These novel D‐π‐A type trifluoroacetophenone‐based photoinitiating systems exhibit good efficiencies (acrylate conversion = 48%–66%; epoxide conversion = 85%–95%; LEDs at 365–450 nm exposure) even in low‐concentration initiators (0.5%, w/w) and very low curing light intensities (1–2 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1945–1954     

New heterobicationic hemicyanine dyes: Synthesis,spectroscopic properties,and photoinitiating ability

This article describes the synthesis, spectroscopic properties, and free‐radical photoinitiation ability of new heterobicationic hemicyanine dyes. A new synthetic strategy for the preparation of unsymmetrical cyanine dyes has been developed, based on 2‐methylbenzothiazole derivative quaternization by 3‐pyridinium‐1‐bromopropane bromide and subsequent condensation of the resulting product with p‐(N,N‐dimethylamino)benzaldehyde. The tested dyes possess in one molecule two quaternary nitrogen atoms; that is, they are heterobicationic in nature. Novel hemicyanine dyes have been tested as visible‐light photoinitiators of vinyl monomer polymerization. Heterobicationic hemicyanine dyes paired with n‐butyltriphenylborate anions are very efficient photoinitiators of the free‐radical polymerization of trimethylolpropane triacrylate when irradiated with the visible emission of an argon‐ion laser. The photoinitiating abilities of the novel photoredox pairs are compared with the photoinitiation properties of their monocationic equivalent {3‐methyl‐2‐[4‐(N,N‐dimethylamino)styryl]benzothiazolium n‐butyltriphenylborate} as well as a Rose Bengal derivative (a typical triplet‐state photoinitiator). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6345–6359, 2006     

N‐alkoxy pyridinium ion terminated polystyrenes: A facile route to photoinduced block copolymerization

Photoactive N‐alkoxy 4‐phenyl pyridinium and N‐alkoxy isoquinolinium ion terminated polystyrenes with hexafluoroantimonate counter anion were prepared and characterized. For this purpose, mono‐ and dibrominated polystyrenes were prepared by atom transfer radical polymerization (ATRP). The reaction of these polymers with silver hexafluoroantimonate in the presence of 4‐phenylpyridine N‐oxide and isoquinoline N‐oxide in dichloromethane produced desired polymeric salts with the corresponding functionalities. Irradiation of these photoactive polystyrenes produced alkoxy radicals at chain ends capable of initiating free radical polymerization of methyl methacrylate (MMA). This way, depending on the number of functionality, AB or ABA type block copolymers were formed which were characterized with the aid of gel permeation chromatography and ¹H NMR spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 423–428, 2007.     

Reverse atom transfer radical polymerization of methyl methacrylate initiated by p‐chlorobenzenediazonium tetrafluoroborate

The controlled polymerization of methyl methacrylate (MMA) in bulk was initiated with p‐chlorobenzenediazonium tetrafluoroborate ( 1 ) and Cu(II) or Cu(I)/Cu(II)/N,N,N′,N″,N″‐pentamethyldietylene triamine (PMDETA) complex system at various temperatures (20, 60, and 90 °C). The proposed polymerization mechanism is based on the Meerwein‐type arylation reaction followed by a reverse atom transfer radical polymerization. In this mechanism, aryl radicals formed by the reaction with 1 and Cu(I) and/or PMDETA initiated the polymerization of MMA. The polymerization is controlled up to a molecular weight of 46,000 at 90 °C. Chain extension was carried out to confirm the controlled manner of the polymerization system. In all polymerization systems, the polydispersity index and initiator efficiency ranged from 1.10–1.57 to 0.10–0.21, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2019–2025, 2003