快速随机粒子网格法的气动噪声预测方法

耦合随机湍流速度生成模型与线化欧拉方程技术,形成了一套具备模拟噪声在非均匀流场中传播能力的气动噪声混合预测方法。该混合方法的随机湍流速度生成模型采用了快速随机粒子网格法,为声传播模拟提供了可靠的源项。而噪声的传播计算选用线化欧拉方程,其空间离散采用9点5阶的色散保持关系格式,时间推进选用了高精度大时间步长的6级4阶龙格库塔格式,远场边界应用了无分裂形式的理想匹配层边界条件。首先,选用高斯脉冲传播算例对线化欧拉方程的时空离散格式、远场无反射边界条件进行了验证分析。然后,计算分析各向同性湍流的空间相关性验证湍流速度生成模型的可靠性。最后,基于已搭建的气动噪声混合预测方法进行了30P30N三段翼缝翼噪声的计算分析。计算分析可知:监测点处功率谱密度曲线、噪声指向性等计算结果与参考文献结果取得了较好的一致性。数值计算结果表明所建立的气动噪声混合预测方法能有效预测二维复杂构型的气动噪声问题。      

电动增压器流量特性的测定与数值分析

应用计算流体动力学方法对研制的电动增压器的压气机整机进行了三维湍流流场模拟计算.计算中对压气机实体模型进行适应性很强的非结构三角网格划分,采用Realizable κ-ε双方程湍流模型模拟时均Navier-Strokes方程.利用热线风速仪对电动增压器出口截面的流量特性进行了测定.将计算的压气机出口流量特性以及速度场分布与实验值进行比较,结果基本吻合,这对电动增压器的结构设计优化具有重要的指导作用.     

冷却用弯掠轴流风机气动噪声预测与试验分析

采用Navier-Stokes方程和标准k-ε湍流模型,对五种不同结构的弯掠轴流风机A/B/C/D/E进行稳态数值模拟,结合给定的性能要求筛选出B/E风机。以稳态流场为基础,采用大涡模拟(LES)与基于Lighthill声类比的FW-H模型相结合的方法对B/E风机进行非定常计算和气动噪声预测,并将预测结果与试验数据进行了对比验证。分析了以叶轮表面作为噪声源时B/E风机的涡流噪声频谱特性,研究了风机三维非定常内部流场中旋涡分布特性,并探讨了风机旋转区域内部声压级的分布规律。     

180°进气弯管安装角度对离心压气机的性能影响

针对车用涡轮增压器压气机进口广泛采用弯管的现实,有必要评估弯管导流进气对离心压气机性能的影响,为发动机进气管道的优化提供参考。本文对离心压气机进口接入直管和多种不同安装角度的180°弯管展开实验和数值研究。研究结果表明:弯管进气使压气机性能下降,其性能下降程度与弯管的周向安装位置有关,而且这种影响随流量增加而增大;叶轮进口的流场结构受进气管道导流、叶轮势流和下游蜗壳周向不对称性共同作用,其对应的总压畸变形态改变了叶轮进气条件,导致压气机性能不同程度下降。     

贯流风扇气动声场数值模拟及分析

针对贯流风扇气动噪声传播特性,采用基于非结构网格的CE/SE算法对其气动流场进行数值模拟,并模拟了气动噪声的传播.湍流模拟采用大涡模型,搭接式滑移网格模型处理动静干涉.噪声传播采用完全欧拉方程作为控制方程,远场采用无反射边界条件.将使用该方法得到的远场噪声频谱与实验数据进行对比分析,结果表明与实验测量得到宽带频谱不同,采用大涡模拟湍流模型进行声源模拟时,会加强部分离散频率上的声级,从而产生误差.     

多翼离心风机气动噪声的数值分析

多翼离心风机叶片短、流道窄,叶轮出口流速分布不均,引起叶轮与蜗壳干涉作用加剧。本文探讨流场与声场非定常耦合机理,根据声类比理论分析其偶极子声源产生的气动噪声。利用直接边界元声学求解方法建立以蜗壳为界的内外声学模型,分析蜗壳对声传播的散射作用,内部噪声通过蜗壳的进出口传播到风机外部。结果表明:从监测点声压级频谱及A计权声压级分布观察,声压级分布在低频段呈宽频分布,在基频与其倍频处出现波峰并呈逐渐衰减趋势,说明该多翼离心风机气动噪声受叶片周期性旋转压力脉动影响较大。对比噪声测试结果,相对误差为2%以内,分析计算与试验相符。     

基于非线性谐波法的离心压气机确定应力场分析

本文采用非线性谐波法与定常计算方法,对离心压气机的内部流场进行了数值模拟,对比了时均流场与定常流场的差别,研究了离心压气机确定应力分布的特点。结果表明,采用非线性谐波方法所得到的压气机内部流场宏观结构与定常结果基本一致,但流场参数分布细节存在较明显差别,且这种差别与对应的确定应力场的分布特征吻合,验证了确定应力是引起时均流场与定常流场差别的原因。对确定应力的分布特征分析表明,离心压气机内确定应力在流向上呈现为从叶轮出口向上下游逐渐递减的趋势,在叶高方向上表现为从叶根到叶顶逐渐递增趋势;且在整体上,确定应力的空间不均匀特性在叶轮出口处最为强烈,表明离心压气机内部最强非定常效应同样位于叶轮出口。     

积垢对离心压气机叶轮气动性能的影响

建立表征离心压气机叶轮积垢分布的粗糙度模型,在叶片表面生成三维、非均匀分布的粗糙带,数值研究干净和积垢状态下叶轮的气动性能和内部流场,并通过敏感性分析,找到对叶轮气动性能影响最大的积垢区域。结果表明:积垢叶轮的多变效率和总压比较干净叶轮均有显著下降;随着流量增大,性能衰减愈发明显;离心压气机叶片前缘靠近叶顶部位为气动性能对积垢的最敏感区域.研究工作为离心压气机的鲁棒设计优化奠定了理论基础。     

多级轴流压气机三维数值优化设计

开发了利用非均匀有理B样条对叶轮机械三维叶片进行参数化重构的叶片造型模块和提供多种优化方法的优化模块;集成上述模块以及自主开发的网格生成软件和流场求解软件,建立了压气机气动数值优化平台.在该平台上对某5级轴流压气机末级静子进行了气动数值优化设计,取得了良好的优化效果,压气机性能得到有效提高.     

新型高频消音器对Whoosh噪声的优化

为了诊断匹配涡轮增压器的汽油车型急加速过程中产生的Whoosh噪声,并分析噪声产生的原理,确定噪声的频率特性以及噪声产生的工况,本文通过对Whoosh噪声在进气系统中贡献量的分析,按照"源-路径-响应"原则,设计出频率相应的高频穿孔消音器并将其插入到进气系统中,从噪声传递路径上进行优化与控制。通过整车道路客观数据分析和主观驾评,确定该方案切实可行,可推广至多款增压车型上应用。     

A numerical study on the flow and sound fields of centrifugal impeller located near a wedge

Centrifugal fans are widely used and the noise generated by these machines causes one of the serious problems. In general, the centrifugal fan noise is often dominated by tones at blade passage frequency and its higher harmonics. This is a consequence of the strong interaction between the flow discharged from the impeller and the cut-off in the casing. However, only a few researches have been carried out on predicting the noise because of the difficulty in obtaining detailed information about the flow field and considering the scattering effect of the casing. The objective of this study is to understand the generation mechanism of sound and to develop a prediction method for the unsteady flow field and the acoustic pressure field of the centrifugal impeller. A discrete vortex method is used to model the centrifugal impeller and a wedge and to calculate the flow field. The force of each element on the blade is calculated by the unsteady Bernoulli equation. Lowson's method is used to predict the acoustic source. In order to consider the scattering and diffraction effects of the casing, Kirchhoff-Helmholtz boundary element method (BEM) is developed. The source of Kirchhoff-Helmholtz BEM is newly developed, so the sound field of the centrifugal fan can be obtained. A centrifugal impeller and wedge are used in the numerical calculation and the results are compared with the experimental data. Reasonable results are obtained not only for the peak frequencies but also for the amplitudes of the tonal sound. The radiated acoustic field shows the diffraction and scattering effect of the wedge.     

Comparative Study of the Propagation of Jet Noise in Static and Flow Environments

In order to analyze the effect of the background flow on the sound prediction of fine-scale turbulence noise, the sound spectra from static and flow environments are compared. It turns out that, the two methods can obtain similar predictions not only at 90 deg to the jet axis but also at mid- and high frequencies in other directions. The discrepancies of predictions from the two environments show that the effect of the jet flow on the sound propagation is related to low frequencies in the downstream and upstream directions. It is noted that there is an obvious advantage of computational efficiency for calculating in static environment, compared with that in flow environment. A good agreement is also observed to some extent between the predictions in static environment and measurements of subsonic to supersonic. It is believed that the predictions in static environment could be an effective method to study the propagation of the sound in jet flow and to predict the fine scale turbulence noise accurately in a way as well.     

Noise simulation of aircraft engine fans by the boundary element method

Numerical simulation results of the civil aircraft engine fan stage noise in the far field are presented. Non-steady-state rotor–stator interaction is calculated the commercial software that solves the Navier–Stokes equations using differentturbulence models. Noise propagation to the far acoustic field is calculated by the boundary element method using acoustic Lighthill analogies without taking into account the mean current in the air inlet duct. The calculated sound pressure levels at points 50 m from the engine are presented, and the directional patterns of the acoustic radiation are shown. The use of the eddy resolving turbulence model to calculate rotor–stator interaction increases the accuracy in predicting fan stage noise.     

开孔结构流致噪声的数值模拟和机理分析

飞机机体表面的开孔设计会形成空腔结构,产生空腔流致噪声。空腔噪声的控制需要彻底认识其流动和噪声机理。以飞机的功能性开孔为例,通过半经验公式分析了其空腔噪声频率随速度的变化规律,预测了出现流声共振的工况。空腔发生流声共振时,特定频率的纯音噪声会被放大。为此,采用脱体涡模拟方法开展了开孔结构流声共振的三维非定常数值计算,分析了其流场和声场特性。其中,数值方法的准确性通过圆形空腔标模计算进行验证。结果表明,在一定速度下剪切层内的扰动将诱发空腔深度方向声模态,出现流声共振现象。此时,剪切层表现为强烈的周期性上下拍动,空腔底部和后缘区域的局部压力脉动幅值较大,声波主要由空腔后缘向上游方向辐射,上游噪声大于下游。     

Qualitative comparison between numerical and experimental results of unsteady flow in a radial diffuser pump

Comparison between numerical simulation and experimental results for unsteady flow field in a radial diffuser pump is presented for the design operating point. The numerical result is obtained by solving three-dimensional, unsteady Reynolds-averaged Navier-Stokes equations by the commercial CFD code CFX-10 withk-ω based shear stress transport turbulence model. Two-dimensional PIV measurements are conducted to acquire the experiment result. The phase-averaged velocity and turbulent kinetic energy fields are compared in detail between the results by the two methods in the impeller, diffuser and return channel regions. The qualitative comparison between CFD and PIV results is quite good in the phase-averaged velocity field. Although the turbulence level by PIV is higher than that by CFD generally, the main turbulence features are nearly the same. Furthermore, the blade orientation effect and other associated unsteady phenomena are also examined, in order to enhance the understanding on impeller-diffuser interaction in a radial diffuser pump.     

离心压气机叶排间涡脱落及气流脉动行为研究

对某一带叶片扩压器跨声速离心压气机内部三维非定常流场进行了数值模拟,依据计算结果描述了叶轮叶片尾缘尾迹涡脱落行为,给出了叶轮尾缘脉动压力频谱特性图和叶轮出口位置脉动速度动能分布图。研究结果表明,主叶片与分流叶片尾缘尾迹涡脱落过程交替进行;转静干涉和转子叶片尾缘的涡脱落行为是造成叶轮尾缘气流脉动行为的主要原因,随着时间的...     

离心压气机内部非定常流场的数值模拟

应用NUMECA软件对跨声速离心压气机级动静叶相互干涉形成的三维非定常粘性流场进行了数值模拟,给出了不同时刻叶片表面压力系数的变化曲线,不同时刻不同流向位置截面上速度沿流道宽度方向分布的变化曲线.模拟结果表明压力场和速度场的非定常特性主要表现在叶轮出口、径向间隙以及整个扩压器内.压力面上的非定常现象较吸力面上显著.     

使用确定应力模型研究离心压气机叶片相互作用

离心压气机叶轮和扩压器叶片间空隙很小,在无叶区和半有叶区的流动非定常特性十分明显。特别是离心叶轮出口通常的射流／尾迹流动使得有叶扩压器进口在时间、空间两个尺度上都存在十分强烈的不均匀性。叶轮和扩压器叶片间的相互作用,历来都被认为是影响离心压气机效率和稳定工作范围的重要因素。本文引入确定应力模型和改进的计算域延伸方法,计算了Ｋｒａｉｎ离心压气机组的流场,着重分析了叶轮出口无叶区、半无叶区等叶片间相互作用最强烈的区域的复杂流动现象。     

Experiments on the unsteady flow field and noise generation in a centrifugal pump impeller

This paper reports on an experimental investigation of large-scale flowfield instabilities in a pump rotor and the process of noise generation by these instabilities. Measurements of the fluctuating components of velocity and surface pressure were made with hot-wire probes and surface mounted pressure transducers on a seven bladed back swept centrifugal water pump impeller operating with air as the working fluid. The impeller was operated without a volute or scroll diffuser, thereby eliminating any sound generation from pressure fluctuations on the volute cutoff. Thus the study focused on flow field and noise components other than the blade passage frequency (and its harmonics). The primary goal of the study was to provide fundamental information on the unsteady flow processes, particularly those associated with the noise generation in the device. It was further anticipated that detailed flow measurements would be useful for the validation of future computational simulations.The measured data at the discharge show a jet-wake type of flow pattern which results in a strong vorticity field. The flow with high velocity found on the pressure side of the impeller tends to move to the low-pressure region present at the suction side of the passage as a form of roll-up around the blade trailing edge. This motion causes an unsteady flow separation at the suction side of the blade and consequently disturbs the flow in the adjacent passage. By interacting with the impeller blades near the trailing edges, this instability flow causes a periodic pressure fluctuation on the blade surface and generates noise by a trailing edge generation mechanism. The spectrum of surface pressure measured at the trailing edge of each blade reveals a cluster of peaks which were identified with azimuthal mode numbers. The correlation between the acoustic farfield pressure and the surface pressure on the impeller blade has proven that the azimuthal modes synchronized with the number of impeller blades generate noise much more efficiently than the other modes. The paper also clarifies the correlation between unsteady flowfield measurements, in both impeller and laboratory co-ordinates, with the radiated noise properties. Thus some light is shed on the noise generation mechanisms of this particular device.