[Bmim]FeCl_4离子液体的物理性质

研究了自制[Bmim]FeCl4离子液体的电导率、黏度与温度的关系,并与文献数据进行了对比.结果表明,采用落球法和旋转法都能准确地测量[Bmim]FeCl4离子液体的黏度;与Andrade方程相比,VTF方程能更好地拟合[Bmim]FeCl4离子液体的黏度和温度的关系,其相关系数达0.999 9.采用不同电导率仪测量的[Bmim]FeCl4离子液体的电导率有较大差别;相比Arrhenius方程而言,VTF方程能更好地拟合电导率与温度的关系;随着温度的变化,电导率与黏度的关系符合Walden规则,其相关系数达到0.99以上.     

离子液体的QSPR/QSAR研究

离子液体以其独特的性质广受关注,人们对其潜在的应用价值做了大量的研究,但对离子液体特性和结构与性质/活性相关的研究却很少。本文综述了离子液体定量结构-性质/活性相关(QSPR/QSAR)研究的最新进展,重点介绍了QSPR/QSAR的基本原理和离子液体的熔点、有机化合物在离子液体中的无限稀释活度系数、离子液体的界面张力、有机物在离子液体中的溶解系数和分配系数、离子液体的电导率和黏度以及离子液体的毒性等性质与分子结构的定量关系,并对离子液体分子结构与性质/活性的定量相关研究的发展趋势进行了展望。     

两种疏水型膦类离子液体的密度、动力粘度及电导率（英文）

通过传统的方法,制备了两种对水和空气稳定的四烷基膦类离子液体。离子液体是:己基三丁基膦四氟化硼和己基三丁基膦双三氟甲基磺酸亚胺。在T=283.15-353.15 K温度范围内,测定了两个离子液体的密度、动力粘度及电导率。讨论了温度、阴离子结构对离子液体的性质的影响。结合文献报道的其它离子液体,讨论了该类离子液体性质随阳离子结构的变化规律,并与咪唑类离子液体的性质进行了比较。通过经验方程,利用密度数据计算了两个离子液体的重要热力学性质参数,例如:分子体积、标准摩尔熵及晶格能等。并将估算性质与传统的咪唑、吡啶类离子液体进行了对比。通过密度和电导率确定了离子液体的摩尔电导率。讨论了Vogel-Fulcher-Tamman(VFT)方程和Arrhenius方程对于粘度和电导率拟合的可行性,并估算了电导活化能及流动活化能。通过Walden规则,描述了密度、粘度及电导率之间的联系。有关研究对新型离子液体的合成及其工业化的应用具有十分重要意义。     

二元混合离子液体的电导率与离子间的缔合作用

在293.15-323.15 K范围内, 测定了13种常见离子液体及其25组混合体系的电导率. 利用Vogel-Tammann-Fulcher (VTF)方程对电导率数据进行拟合, 并通过方程式中的拟合参数分析了离子液体混合后其阴阳离子间缔合作用的变化规律. 结果表明,在相同温度下, 离子液体的阳离子侧链越短,阴离子电荷越分散, 阴阳离子间的氢键作用力越弱,离子液体的电导率越大, 其中阴离子的影响比阳离子更明显.混合离子液体中离子间的缔合作用不仅与阴阳离子的种类有关,而且与混合物的组成有关.     

质子型离子液体N,N-二甲基乙醇胺丙酸盐的密度、粘度及电导率

在283.15-333.15 K温度范围内, 测量了质子型离子液体N,N-二甲基乙醇胺丙酸盐(DMEOAP)的密度、粘度及电导率. 讨论了温度对密度、粘度和电导率等物理化学参数的影响. 通过经验和半经验方程得到了该离子液体的热膨胀系数、分子体积、标准摩尔熵及晶格能等热力学性质参数. 由电导率和密度计算出了该离子液体的摩尔电导率. 利用Vogel-Fulcher-Tamman (VFT)方程, 将测量的动力粘度和电导率对温度拟合, 得到了动力粘度和电导率随温度变化方程式.并通过Walden规则, 建立了粘度与摩尔电导率之间的联系.     

1-丁腈-3-甲基咪唑双三氟甲基磺酸亚胺的性质

制备了功能化离子液体1-丁腈-3-甲基咪唑双三氟甲基磺酸亚胺。在T为283.15-353.15 K温度范围内,测定了该功能化离子液体的密度、动力粘度、电导率及折光率。讨论了亚甲基的增减对该类功能化离子液体的密度、动力粘度、电导率及折光率等性质的影响,并与传统咪唑类、吡啶类离子液体物理化学性质的变化趋势进行了对比。通过经验方程计算了该功能化离子液体的热膨胀系数、分子体积、标准摩尔熵及晶格能等热力学性质参数。讨论了Vogel-Fulcher-Tamman (VFT)方程和Arrhenius方程的适用性,得出VFT方程适用于该功能化离子液体,而Arrhenius方程并不适用。有关研究对新型离子液体的合成及其工业化的应用具有十分重要的意义。     

离子液体谱学性质和热力学数据关联的新进展

离子液体的性质是其微观结构和相互作用的外在表现,与其应用密切相关.谱学手段能从分子水平上探测离子液体的微观环境和相互作用,近年来在定量关联或预测离子液体宏观性质方面发挥着越来越重要的作用.本文着重概述了红外光谱(IR)、拉曼光谱(Raman)、核磁共振波谱(NMR)和电子顺磁波谱(ESR)等常见谱学手段在定量关联离子液体及其溶液体系宏观性质方面的研究进展以及发展方向.     

离子液体的定量结构-性质/活性研究

本文系统介绍了离子液体定量结构-性质/活性相关(QSPR/QSAR)的研究方法和步骤,综述了QSPR/QSAR在离子液体的熔点、有机物在离子液体中的无限稀释活度系数、离子液体的表面张力、离子液体的电导率、有机物在离子液体中的溶解度、离子液体的黏度以及离子液体的生物毒性和降解性等方面的最新研究进展,总结了该方法的优缺点,并对未来的研究趋势进行了展望。     

离子液体的制备与性质表征——介绍一个综合化学实验

本实验以甲基咪唑为原料,合成1－甲基－3－丁基咪唑溴盐,再通过阴离子交换合成1－甲基－3－丁基咪唑氟硼酸盐和1－甲基－3－丁基氟磷酸盐离子液体,然后通过红外、紫外、核磁对其进行表征。并测定了上述离子液体的电导率、黏度、吸水性和溶解性等性质。     

离子液体构效关系及应用*

离子液体独特的物理化学性质,使其成为应用前景良好的绿色功能材料和介质,受到广泛关注。本文探讨了离子液体结构-性质关系及现存的问题,对相关实验和理论工作进行了分析;揭示了离子液体的多尺度结构和动态变化规律,构建离子液体微观结构与宏观性质之间的定量关系,为离子液体体系定量设计与调控提供了科学理论和方法;展望了离子液体在化工、能源、环境和材料等领域的应用。     

Towards large-scale, fully ab initio calculations of ionic liquids

Ionic liquids have attracted a substantial amount of interest as replacement of traditional electrolytes in high efficiency electrochemical devices for generation and storage of energy due to their superior physical and chemical properties, especially low volatility and high electrochemical stability. For enhanced performance of the electrochemical devices ionic liquids are required to be highly conductive and low viscous. Long-range Coulomb and short-range dispersion interactions between ions affect physical and chemical properties of ionic liquids in a very complex way, thus preventing direct correlations to the chemical structure. Considering a vast combination of available cations and anions that can be used to synthesize ionic liquids, development of predictive theoretical approaches that allow for accurate tailoring of their physical properties has become crucial to further enhance the performance of electrochemical devices such as lithium batteries, fuel and solar cells. This perspective article gives a thorough overview of current theoretical approaches applied for studying thermodynamic (melting point and enthalpy of vapourisation) and transport (conductivity and viscosity) properties of ionic liquids, emphasizing their reliability and limitations. Strategies for improving predictive power and versatility of existing theoretical approaches are also outlined.     

Thermophysic comparative study of two isomeric pyridinium-based ionic liquids

A comprehensive thermophysical study of isomeric room-temperature ionic liquids n-butyl-3-methyl-pyridinium tetrafluoroborate and n-butyl-4-methyl-pyridinium tetrafluoroborate has been performed. This paper reports various experimental data including density, speed of sound, refractive index, surface tension, isobaric molar heat capacity, and kinematic viscosity. From the experimental results, coefficients of thermal expansion, dynamic viscosities and molar refractions of the studied ionic liquids have been determined. Results have been analyzed paying special attention to the different features of the isomers and their structural differences. Several theories and empirical relations have been applied in order to predict physical properties of ionic liquids. A good agreement between experimental and calculated data has been found. Furthermore, a study about the versatility and application of the different relationships has been carried out finding that in general density and coefficients of thermal expansion can be estimated with relatively good accuracy.     

Probing the Reorganization of Ionic Liquids’ Structure Induced by CO2 Sorption

The sorption of CO₂ is often used to modify the macroscopic properties of liquids and solids. In the particular case of ionic liquids, different from molecular liquids, the sorption of CO₂ may not induce volume expansions due to the strong Coulombic interactions between the ions of the fluid. However, a considerable viscosity decrease has been systematically observed. In order to understand the mechanisms of properties modifications in ionic fluids, herein we used Raman spectroscopy to probe the effect of CO₂ on the structure of ionic liquids. It is shown that CO₂ perturbs the electrostatic interactions between cations and anions, thus inducing a change in the polar domain of ionic liquids. It is observed that ionic liquids having bulkier ions are more prone to be perturbed by CO₂ in comparison to ionic liquids having smaller ions. These results reveal new means of controlling the electrostatic forces between the ions and contributes to the mechanistic understanding of the modification of the macroscopic properties of ionic liquids by CO₂ sorption.     

Correlation between the fluorescent response of microfluidity probes and the water content and viscosity of ionic liquid and water mixtures

Accurate data on transport properties such as viscosity are essential in plant and process design involving ionic liquids. In this study, we determined the absolute viscosity of the ionic liquid + water system at water mole fractions from 0 to 0.25 for three 1-alkyl-3-methylimidazolium ionic liquids: 1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide and 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide. In each case, the excimer to monomer ratio for 1,m-bis(1-pyrenyl)alkanes (m= 3 or 10) was found to increase linearly with the mole fraction of water. Of the probes studied only PRODAN and rhodamine 6G, both of which have the ability to participate in hydrogen bonding, exhibited Perrin hydrodynamic behavior in the lower viscosity bis(trifluoromethane sulfonyl)imides. As a result, these probes allow for the extrapolation of the absolute viscosity of the ionic liquid mixture from the experimental fluorescence steady-state polarization values.     

Prediction of phase equilibrium in mixtures containing ionic liquids using UNIFAC

The UNIFAC model is extended to mixtures of ionic liquids consisting of the imidazolium cation and the hexafluorophosphate anion with alkanes, cycloalkanes, alcohols and water. Two new main groups, the imidazolium and the hexafluorophosphate groups, are introduced in UNIFAC. The required group interaction parameters between these groups and the existing UNIFAC main groups, CH₂, OH and H₂O, are determined by fitting binary liquid–liquid equilibrium and infinite dilution activity coefficient experimental data. The predictive capability of the extended UNIFAC model is examined against experimental data for vapour–liquid equilibrium, liquid–liquid equilibrium and activity coefficients at infinite dilution of binary and ternary systems containing 1-alkyl-3-alkyl′-imidazolium hexafluorophosphate ionic liquids, alkanes, cycloalkanes, alcohols and water. The results indicate that UNIFAC is a reliable model for phase equilibrium predictions in mixtures containing this type of ionic liquids.     

二茂铁在几种离子液体中的迁移行为

采用循环伏安法研究了二茂铁(Fc)在几种离子液体中的迁移行为. 计算了Fc在各离子液体中的扩散系数和粘度系数,探讨了离子液体粘度与离子液体结构之间的关系. 实验结果表明, 离子液体的粘度随阳离子取代基碳链长度的增加而增加, 随阴离子对称性的增加而增加.     

A new force field model of 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and acetonitrile mixtures

Recently, we introduced a new force field (FF) to simulate transport properties of imidazolium-based room-temperature ionic liquids (RTILs) using a solid physical background. In the present work, we apply this FF to derive thermodynamic, structure, and transport properties of the mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF(4)], and acetonitrile (ACN) over the whole composition range. Three approaches to derive a force field are formulated based on different treatments of the ion-ion and ion-molecule Coulomb interactions: unit-charge, scaled-charge and floating-charge approaches. The simulation results are justified with the help of experimental data on specific density and shear viscosity for these mixtures. We find that a phenomenological account (particularly, a simple scaled-charge model) of electronic polarization leads to the best-performing model. Remarkably, its validity does not depend on the molar fraction of [BMIM][BF(4)] in the mixture. The derived FF is so far the first molecular model which is able to simulate all transport properties of the mixtures, comprising RTIL and ACN, fully realistically.     

Effect of the pressure on the viscosities of ionic liquids: Experimental values for 1-ethyl-3-methylimidazolium ethylsulfate and two bis(trifluoromethyl-sulfonyl)imide salts

A new falling-body viscometer has been implemented to measure viscosity of liquids in a temperature range from (313.15 to 363.15) K at pressures up to 150 MPa. The accuracy of the viscometer was verified after comparing experimental results of squalane with previous literature data finding an average absolute deviation lower than 1.5%. With this device, we have measured viscosity values for three ionic liquids: 1-ethyl-3-methylimidazolium ethylsulfate, 1-butyl-1-methylpyrrolidinium bis(trifluoro-methylsulfonyl)imide and 1-(2-methoxyethyl)-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide within the temperature and pressure ranges noted above. The experimental values were correlated as a function of temperature and pressure with four different equations. In addition, we have analysed the pressure–viscosity derived properties for these fluids and for other five ionic liquids using literature values.     

Diffusion and viscosity of liquid tin: Green-Kubo relationship-based calculations from molecular dynamics simulations

Molecular dynamics (MD) simulations of liquid tin between its melting point and 1600 °C have been performed in order to interpret and discuss the ionic structure. The interactions between ions are described by a new accurate pair potential built within the pseudopotential formalism and the linear response theory. The calculated structure factor that reflects the main information on the local atomic order in liquids is compared to diffraction measurements. Having some confidence in the ability of this pair potential to give a good representation of the atomic structure, we then focused our attention on the investigation of the atomic transport properties through the MD computations of the velocity autocorrelation function and stress autocorrelation function. Using the Green-Kubo formula (for the first time to our knowledge for liquid tin) we determine the macroscopic transport properties from the corresponding microscopic time autocorrelation functions. The selfdiffusion coefficient and the shear viscosity as functions of temperature are found to be in good agreement with the experimental data.     

New ionic liquids with tris(perfluoroalkyl)trifluorophosphate (FAP) anions

The synthesis of new ionic liquids with tris(perfluoroalkyl)trifluorophosphate (FAP) anions is described. The physico-chemical properties (conductivity, viscosity, electrochemical and thermal stability) of this new generation of ionic liquids (molten salts) are discussed. FAP-ionic liquids show an excellent hydrolytic stability, low viscosity and high electrochemical and thermal stability that makes them attractive for use in electrochemical devices and as a new media for application in modern technologies and chemical synthesis.