Adsorption Properties of Uranium (VI) Ions on Reactive Crosslinked Acrylamidoxime and Acrylic Acid Copolymer Resins

Crosslinked acrylic acid (AA) acrylonitrile (AN) copolymer was prepared by suspension copolymerization in the presence of poly (vinyl alcohol) as suspending agent and N,N-methylenebisacrylamide (MBA) and divinylbenzene (DVB) as crosslinking agents. The molecular ratios between AN and AA was 95: 5 mol%. Different ratios 2, 5, and 10 wt% of crosslinkers was used. The nitrile group of the copolymer was converted to acrylamidoxime in the presence of hydroxylamine. Morphologies of the prepared resins were examined by scanning electron microscope (SEM). Recovery of uranium ions was investigated. The adsorption of uranium was occurred in nitric acid, hydrochloric acid and sulfuric acid solutions. Effect of pH, time of loading, type of acid, ratio, and type of crosslinker were investigated. Regeneration of eluted resins was determined.     

Monodisperse Crosslinked Microsphere Polymer Particles by Dispersion Copolymerization of Glycidyl Methacrylate and Divinylbenzene

Monodisperse polyglycidyl methacrylate (PGMA) microsphere particles crosslinked with divinylbenzene crosslinker were prepared by single-stage dispersion copolymerization in ethanol medium. 1 wt% of DVB was successfully incorporated due to the costabilizing effect of GMA as a surface-active monomer. This behavior may indicate that the fast formation of stable primary particle leads to monodispersity. The average particle sizes and the particle size distributions increased with the DVB crosslinker concentration. The effects of two different variables (initiator concentration, crosslinker concentration) on the rate of dispersion copolymerization have been investigated. With the initiator concentration, the polymerization procedure mainly depended on the dual natures of general dispersion polymerization, in the crosslinked state. Up to 1 wt% DVB, the particle growth was controlled by the monomer diffusion from the continuous phase into the particle phase.     

Morphologies of micron-sized monodispersed composite polymer particles having crosslinked structures produced by seeded polymerizations

Three kinds of micron-sized monodispersed polystyrene (PS)/ poly(styrene - divinylbenzene) composite particles were produced by two kinds of seeded copolymerizations of styrene (S) and divinylbenzene (DVB) (PS seed/ (S+DVB)=2/1, wt. ratio; S/DVB=1/1, molar ratio) in the presence of about 2 μm-sized monodispersed PS particles, and their morphologies were examined. One was produced by a seeded dispersion copolymerization where almost monomers and initiators exist in an ethanol/water (12.6/4.0, w/w) medium. The others two were produced by seeded copolymerizations with the dynamic swelling method where almost monomers exist in the monomer-swollen particles using 2, 2'-azobisisobutyronitrile in monomer-swollen PS seed particles or using 4, 4'-azobis (4-cyanopentanoic acid) in an ethanol/water (7/43, w/w) medium. In the former polymerization, the produced composite particles had a high dense crosslinked shell, whereas in the latter two polymerizations, they did the comparatively homogeneous crosslinked structures.     

Influence of Polycarboxylate Dispersants with Different Molecular Structures on the Performance of Coal Water Slurry

Polycarboxylate dispersants have variable structures and can be designed according to practical needs. Further study on the influence of molecular structures on the performance of coal-water slurry (CWS) has vital significance. A variety of polycarboxylate dispersants was designed and synthesized with different monomers. The performance of each dispersant for the low-rank China CWS (i.e., Shenfu coal) was evaluated. Results showed that sodium p-styrene sulfonate (SSS) was the most efficient monomer with better adsorption performance on the surface of coal particles and lower apparent viscosity (i.e., mole ratio of SSS and acrylic acid (AA) sodium 65:35, CWS concentration 63 wt%, dispersant dosage 0.5 wt%). Polyethylene glycol acrylate (PA) was also effective. In addition, 5 wt% cationic monomer methyl acryloyl oxygen ethyl trimethyl ammonium chloride (DMC) was introduced into the structure. The polycarboxylate dispersant with optimal molecular structure was applied in Shenfu coal. The performance of water slurry could meet the national standards well (i.e., apparent viscosity 920 mPa · s), displaying good rheological property and stability.     

Modification and Application of Poly(Ethylene Terephethalate) Nonwoven Fiber Using Octadecyl Acrylate and Acrylic Acid as Oil Sorbers

Three series of crosslinked octadecyl acrylate and acrylic acid copolymers were prepared through suspension copolymerization based on acrylic acid content (10, 30, 50%wt. ratio). Divinyl benzene (DVB) was used as a crosslinker with different weight ratios (1, 4 and 10%). Isopropyl alcohol or dioctyl phthalate and methyl benzoate were used as two different reaction solvents in the presence of ABIN as initiator. The prepared crosslinked copolymers were characterized by SEM, TGA and FTIR spectroscopic analyses. The prepared polymers were coated onto poly(ethylene terephethalate) nonwoven fiber (NWPET). The effect of copolymerization feed composition, crosslinker wt% and reaction media or solvent on swelling properties of crosslinked polymers were studied through the oil absorption tests in toluene and 10% of diluted crude oil with toluene. It was noticed that the maximum swelling of crosslinked copolymers was increased from 30 to 100 g/g after grafting of copolymers onto NWPET.     

Preparation of divinylbenzene copolymer particles with encapsulated hexadecane for heat storage application

From the viewpoint of heat storage application, encapsulation of n-hexadecane (HD) was carried out by microsuspension copolymerizations of divinylbenzene (DVB) and acrylic monomers (butyl acrylate, BA; ethyl acrylate, EA) utilizing the self-assembling of phase-separated polymer (SaPSeP) method proposed by the authors. The heat of solidification (H _s) of encapsulated HD in the micron-sized, cross-linked particles was determined by the differential scanning calorimeter (DSC). H _s of the encapsulated HD in poly(DVB) particles was much lower than that of pure HD, but it was increased with BA or EA content copolymerized up to that of pure HD. Such an influence of encapsulation on the H _s was discussed. Part CCIIIC of the series “Studies on suspension and emulsion”.     

Synthesis,characterization, and application of polystyrene adsorbents containing tri-n-butylphosphate for solid-phase extraction of uranium (VI) from aqueous nitrate solutions

Polystyrene adsorbent for solid-phase extraction of U(VI) was developed through in situ copolymerization of styrene and divinylbenzene in the presence of tri-n-butylphosphate and its magnetic form was obtained by addition of fine particles of magnetite in an amount of 15 wt% of the total monomers used. The obtained adsorbents were characterized by means of scanning electron microscope, FTIR spectroscopy and X-ray powder diffraction. The adsorption behavior of U(VI) from aqueous nitrate solutions onto non-magnetic adsorbent RI (St–DVB–TBP) and its magnetic form RII (St–DVB–TBP–Fe₃O₄) at different experimental condition was studied using batch method. The adsorption results were found to fit Langmuir model. The magnetite-containing adsorbent showed higher uptake values relative to the corresponding magnetite-free one. The adsorption of U(VI) onto RI followed pseudo-first order kinetics whereas the adsorption onto RII followed pseudo-second order. Thermodynamic studies revealed that the adsorption process was a spontaneous exothermic reaction. Desorption of the loaded U(VI) was carried out using distilled water and found to be 97 and 93 % for RI and RII, respectively.     

Synthesis and surface properties of self-crosslinking core–shell acrylic copolymer emulsions containing fluorine/silicone in the shell

Stable emulsions of a core–shell acrylic copolymer (non-crosslinkable V0, and crosslinkable V2, V4, V6, and V8, where the numbers indicate the wt% of crosslinking agent based on the total acrylate monomer content) containing butyl acrylate (BA, 45 wt%), glycidyl methacrylate (GMA, 45 wt%), heptadecafluorodecyl methacrylate (PFA, 10 wt%), and various contents of crosslinking agent (vinyltriethoxysilane, VTES) were synthesized using a three-stage seeded emulsion polymerization process with a small amount of surfactant. The average particle size and viscosity of emulsions increased significantly with increasing VTES content. This study examined the effects of the VTES content on the surface/mechanical properties of self-crosslinked copolymer film samples containing a fixed acrylate monomer content to find the optimum VTES content. XPS showed that the film–air surface of the copolymer samples had a higher fluorine/silicone content than the film–dish interface. The tensile strength/modulus, thermal stability, and two Tgs (α and β Tgs) of the film samples increased significantly with increasing VTES content. The contact angle of the film samples increased with increasing VTES content up to approximately 6 wt%, and then decreased slightly. The optimum VTES content was approximately 6 wt% based on the total acrylate monomer content to obtain a high water/oil repellent coating material (V6) with the highest water/methylene iodide-contact angles (118.2°/81.8°) and lowest surface energy (18.4 mN/m).     

稀土络合催化苯乙烯均聚及其与二乙烯苯共聚

应用稀土化合物:环烷酸钕Nd(naph)_3和二(2-乙基己基)磷酸钕Nd·(P_(204)_3分别与三异丁基铝Al(i-Bu)_3组成络合催化剂引发苯乙烯均聚及其与二乙烯苯共聚。适宜的聚合温度为50℃:[Nd]=3×10~(-5)mol/ml;[M]=3×10~(-3)mol/ml;Al/Nd=10(摩尔比),并且催化剂按以下次序配制:钕化合物→溶剂→苯乙烯→三异丁基铝,苯乙烯的转化率在90％以上。溶剂种类及聚合条件不同,制得的聚苯乙烯可为白色或黄色粉末状无定形聚合物,分子量几百至上万。聚合体系中添加PeCl_3能抑制黄色产生。在共聚反应中,二乙烯苯比苯乙烯显示较高的反应活性。     

Synthesis of well‐defined hairy polymer microspheres by precipitation polymerization and surface‐initiated atom transfer radical polymerization

A variety of polymer microspheres were successfully synthesized by the surface‐initiated atom transfer radical polymerization (SI‐ATRP) of monomers by using monodisperse polymer microsphere having benzyl halide moiety as a multifunctional polymeric initiator. First, a series of monodisperse polymer microsphere having benzyl chloride with variable monomer ratio (P(St‐DVB‐VBC)) were synthesized by the precipitation polymerization of styrene (St), divinylbenzene (DVB), and 4‐vinylbenzyl chloride (VBC). Next, hairy polymer microspheres were synthesized by the surface‐initiated ATRP of various monomers with P(St‐DVB‐VBC) microsphere as a multifunctional polymeric initiator. The hair length determined by the SEC analysis of free polymer was increased with the increase of M/I. These hairy polymer microspheres were characterized by SEM, FT‐IR, and Cl content measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1296–1304     

Interaction of 2,2,6,6-tetramethylpiperidine-1-oxyl chloritewith alcohols

The kinetics of the oxidation of a series of alcohols (viz., ethanol, propan-2-ol, butan-1-ol, butan-2-ol, heptan-4-ol, decan-2-ol, propan-1,3-diol, butan-2,3-diol, cyclohexanol, benzyl alcohol, and borneol) with the oxoammonium salt 2,2,6,6-tetramethylpiperidine-1-oxyl chlorite in acetonitrile was studied by spectrophotometry. The products of oxidation of primary alcohols are the corresponding aldehydes and carboxylic acids, and the products of oxidation of secondary alcohols are ketones. The reaction rate is described by the second order equation. The rate constants and activation parameters were determined. The rate constant as a function of the alcohol nature is described by the one-parameter Taft equation.     

Effects of crosslinking agent/diluents/thiol on morphology of the polymer matrix and electro-optical properties of polymer-dispersed liquid crystal

To study effects of the crosslinking agent/diluents/thiol on morphology of the polymer matrix and the electro-optical properties of polymer-dispersed liquid crystal (PDLC) films, samples were prepared by ultraviolet (UV)-initiated polymerisation. Due to the interaction between thiol–acrylate reaction and acrylate monomers polymerisation, the sample compositions were the foremost determinant to the microstructures which in turn played an essential role on the electro-optical properties of the PDLC films. With the increasing content of the crosslinking agent, the LC droplet size decreased, while the thiol had a contrary effect on the LC droplet size. It was demonstrated that the superior properties of the low-driven voltage (37.2 V), the high contrast ratio (148.2), the short response time (14.9 ms) and the high saturation transmittance (86.6%) could benefit from a novel microstructure which had a dense surface and meshes with microspheres attached. It was of great significance for the optimisation and the potential applications of the PDLC films.     

Design, Development and Evaluation of Monovinyl Acrylates Characterized by Secondary Functionalities as Reactive Diluents to Diacrylates

This study focuses on the design and development of novel monovinylic (meth)acrylate monomers with enhanced polymerization kinetics and the evaluation of their performance as reactive diluents in diacrylate systems. Novel (meth)acrylic monomers characterized by several new secondary functionalities are developed in this study and are shown to exhibit reactivities 10-70 fold greater than traditional monoacrylates such as hexyl acrylate. These monomers were designed based on our understanding of interactions between monomer structure, polymerizations kinetics, and polymer properties. Performance of these monovinyl monomers as reactive diluents is also investigated in this study. Copolymerization of these monomers with diacrylates enhanced both the reactivity and the mechanical properties of the diacrylate system. Specifically, while copolymerization of a diacrylate system with traditional monoacrylates such as hexyl acrylate decreases the overall reactivity of the system, its copolymerization with the novel monomers led to comonomer mixtures, that were 30-50% more reactive than either of the individual components, with initial polymerization rates increased by as much as 2 times the more reactive component. Further, the copolymerization of these novel monovinyl systems with diacrylates also enabled formation of polymers with enhanced mechanical properties over the corresponding diacrylates including a more homogeneous network structure as indicated by a glass transition temperature that was narrowed by up to 55 % while increasing the glass transition temperature by as much as 10°C.     

Controlling morphology and particle size of hollow poly(styrene-divinylbenzene) microspheres fabricated by template-based method

Hollow poly(styrene–divinylbenzene) (P(S-DVB)) microspheres were fabricated via template-based method including synthesis of silica particles by sol-gel method, preparation of silica/P(S-DVB) particles by dispersion polymerization and chemical etching of silica cores by NaOH solution. TEM, FTIR and TG analyses confirmed that the hollow P(S-DVB) microspheres were successfully obtained. The morphology of hollow P(S-DVB) microspheres could be controlled by adjusting the amounts of DVB, AIBN and VTES, and the round-ball-like hollow P(S-DVB) microspheres were fabricated when the amount of DVB, AIBN and VTES was 30.0?wt%, 5.0?wt% and 30.0?vol% respectively. Both the size of silica particles and amount of monomers were regarded as the two key factors to control the particle size of the round-ball-like hollow P(S-DVB) microspheres.     

Improvement of image sticking on liquid crystal displays with polymer layers produced from mixed monomers

As a model of polymer-sustained-alignment liquid crystal display (PSA-LCD), the LC cells having the polymer layers produced from the homopolymers and copolymers of 4,4?-dimethacryloyl-oxy-biphenyl (4,4?-DMABiph) and 2,6-dimethacryloyl-oxy-naphthalene (2,6-DMANaph) were prepared and investigated image sticking phenomenon with evaluations of residual direct current voltage (V_rDC) and difference in pre-tilt angle before and after application of alternate current (AC) voltage (Δtilt). The V_rDC was effectively improved by adding a small amount of 2,6-DMANaph to 4,4?-DMABiph because the concentrations of radicals and ions in the LC layer were decreased due to increase in the rate constant of the polymerisation with the addition of 2,6-DMANaph under UV light exposure. The Δtilt was proportionally increased with increasing the weight ratio of 2,6-DMANaph in the mixed monomers of 4,4?-DMABiph and 2,6-DMANaph. We confirmed that the range of the weight ratio for 2,6-DMANaph in the mixed monomers of 4,4?-DMABiph and 2,6-DMANaph from 10 to 25 wt% was useful for obtaining the small level of image sticking in the PSA-LCD.     

Synthesis of core-shell polymer microspheres by two-stage distillation-precipitation polymerization

Narrow- or monodisperse core-shell polymer microspheres with a dense core and a lightly crosslinked shell with different functional groups, such as ester, hydroxyl, cyano, were prepared by two-stage distillation-precipitation polymerization without any stabilizer. Commercial divinylbenzene (DVB), containing 80% of DVB was polymerized by distillation-precipitation polymerization with 2,2′-azobis(2-methyl propionitrile) (AIBN) as initiator in neat acetonitrile in the absence of any stabilizer as the first stage polymerization and used as the core. When the conversion of DVB was about 35% in the first stage, the second-comonomers with different functional groups, such as methyl methacrylate (MMA), ethyl methacrylate (EMA), butyl methacrylate (BMA), 2-hydroxyethyl methacrylate (HEMA), i-octyl acrylate (i-OA), dodecyl acrylate (DA), methyl acrylate (MA), ethyl acrylate (EA), ethylene glycol dimethacrylate (EGDMA), triethyleneglycol dimethacrylate (TEGDMA), trimethylolpropane trimethacrylate (Trim), and acrylnitrile (AN) together with AIBN were introduced, respectively, into the reaction system and copolymerized with unreacted DVB on the core surface to form a lightly crosslinked functional shell. The resulting core-shell polymer particles were characterized with scanning electron microscopy (SEM) and FT-IR spectra.     

Model filled polymers. IX. Synthesis of uniformly crosslinked polystyrene microbeads

Monodisperse sized crosslinked polystyrene (PS) beads prepared by reaction of styrene (S) and divinylbenzene (DVB), in batch emulsion copolymerization in the absence of emulsifiers, are not uniformly crosslinked, because DVB is more reactive than S. For copolymerization of 1 to 10 mol % DVB and S, within each crosslinked PS microbead, the crosslink density varies by a factor exceeding two and decreases with increased conversion. A semicontinuous copolymerization, involving incremental additions of DVB, produces uniformly crosslinked PS beads. For both copolymerization techniques, T_g correlates well with crosslink density and PS beads are spherical and monodisperse in size. © 1992 John Wiley & Sons, Inc.     

Control of thermal,mechanical, and optical properties of three‐component maleimide copolymers by steric bulkiness and hydrogen bonding

N‐substituted maleimides polymerize in the presence of a radical initiator to give polymers with excellent thermal stabilities and transparency. In this study, we synthesized various maleimide copolymers with styrenes and acrylic monomers to control their thermal and mechanical properties by the introduction of bulky substituents and intermolecular hydrogen bonding. Three‐component copolymers of N‐(2‐ethylhexyl)maleimide in combination with styrene, α‐methylstyrene (MSt), or 1‐methylenebenzocyclopentane (BC5) as the styrene derivatives, and n‐butyl acrylate, 2‐hydroxyethyl acrylate, 4‐hydroxybutyl acrylate, or acrylic acid as the acrylic monomers were prepared by radical copolymerization. These copolymers were revealed to exhibit excellent heat resistance by thermogravimetric analysis. Glass transition temperatures increased by the introduction of bulky MSt and BC5 repeating units. The mechanical properties of the copolymer films were improved by the introduction of intermolecular hydrogen bonding. Optical properties, such as transmittance, refractive index, Abbe number, and birefringence, were determined for the copolymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1569–1579     

Use of a new methacrylic monomer, 4,4′‐di(2‐hydroxy‐3‐methacryloyloxypropoxy)benzophenone,in the synthesis of porous microspheres

A new aromatic, tetrafunctional methacrylate monomer, 4,4′‐di(2‐hydroxy‐3‐methacryloyloxypropoxy)benzophenone, and its application to the synthesis of porous microspheres are presented. This new monomer was copolymerized with divinylbenzene in the presence of pore‐forming diluents. The properties of the obtained highly crosslinked microspheres were investigated as column packing for high‐performance liquid chromatography. Their porous structures in both dry and wet states were studied and compared with those of poly(divinylbenzene) and the less crosslinked copolymer of 2,3‐epoxypropyl methacrylate and divinylbenzene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7014–7026, 2006     

Synthesis of P123-Templated and DVB-Cross-linked Meso-macroporous Poly (ionic liquids) with High-Performance Alkylation

Meso-macroporous poly (ionic liquids) (MPILs) were successfully synthesized through a novel strategy with P123 (PEO₂₀PPO₇₀PEO₂₀) as the pore-forming agent and divinylbenzene as crosslinker. Then effects of reaction temperature and the molar ratio of ionic liquid to divinylbenzene (IL to DVB) were systematically investigated together with the morphology and structure of MPILs. It was found the MPILs owned a meso-macroporous channel-like structure, large surface area (up to 732 m²/g), large pore volume (1.42 cm³/g) and high thermal stability. Meanwhile, the Brunauer–Emmett–Teller surface of MPILs could be fabricated by adjusting the reaction temperature and especially the IL to DVB molar ratio. In the probe reaction of alkylation of styrene and o-xylene, a 100% conversion of styrene and 96.4% PXE yield was acquired, and this is more expert than common commercial liquid acid catalyst. This work might develop a novel way for synthesizing porous heterogeneous polymer catalysts in the future and owning a promising future applied in other acidic catalytic reactions.