Lable‐Free Electrochemical DNA Sensor Based on Gold Nanoparticles/Poly(neutral red) Modified Electrode

We present a new strategy for the label‐free electrochemical detection of DNA hybridization based on gold nanoparticles (AuNPs)/poly(neutral red) (PNR) modified electrode. Probe oligonucledotides with thiol groups at the 5‐end were covalently linked onto the surface of AuNPs/PNR modified electrode via S‐Au binding. The hybridization event was monitored by using differential pulse voltammetry (DPV) upon hybridization generates electrochemical changes at the PNR‐solution interface. A significant decrease in the peak current was observed upon hybridization of probe with complementary target ssDNA, whereas no obvious change was observed with noncomplementary target ssDNA. And the DNA sensor also showed a high selectivity for detecting one‐mismatched and three‐mismatched target ssDNA and a high sensitivity for detecting complementary target ssDNA, the detection limit is 4.2×10^?12 M for complementary target ssDNA. In addition, the DNA biosensor showed an excellent reproducibility and stability under the DNA‐hybridization conditions.     

Impedance‐Based DNA Biosensor Employing Molecular Beacon DNA as Probe and Thionine as Charge Neutralizer

In this paper, we present an impedance‐based DNA biosensor using thionine intercalation to amplify DNA hybridization signal. Beacon single‐stranded DNA (ssDNA) probe and mercaptoacetic acid were self‐assembled onto a Au electrode by forming Au? S bonds. These beacon ssDNAs were hybridized with the complementary sequences around the loop structure. Then thionine was intercalated into the double‐stranded DNA (dsDNA) immobilized on the Au electrode surface. Due to the neutralization of the negative charges of dsDNA by the intercalated thionine, the electronic transfer resistance (R_et) of the DNA modified Au electrode was significantly diminished. Herein, the decreased value of R_et resulted from the thionine intercalating into dsDNA was employed as the hybridization signal. SDS was used to reduce the unspecific adsorption between ssDNA and thionine. Several experimental conditions, including the surface coverage of ssDNA probe on Au electrode, the hybridization temperature and time were all optimized. Moreover, the hybridization reactions of the unstructured linear ssDNA probe and the structured beacon ssDNA probe with their complementary sequences were compared in this work. The sensitivity of the presented DNA biosensor highlighted that the intercalation of thionine into dsDNA was an efficient approach to amplify the hybridization signal using impedance detection technique. Additionally, in this DNA biosensing protocol, beacon ssDNA has a good ability to distinguish target DNA sequences. This results in a higher specificity than using traditional unstructured DNA probe.     

Molecular simulation study of water interactions with oligo (ethylene glycol)-terminated alkanethiol self-assembled monolayers

Molecular simulations were performed to study a system consisting of protein (e.g., lysozyme) and self-assembled monolayers (SAMs) terminating with different chemical groups in the presence of explicit water molecules and ions. Mixed SAMs of oligo (ethylene glycol) [S(CH2)4(OCH2CH2)4OH, (OEG)] and hydroxyl-terminated SAMs [S(CH2)4OH] with a mole fraction of OEG at chiOEG = 0.2, 0.5, 0.8, and 1.0 were used in this study. In addition, methyl-terminated SAMs [S(CH2)11CH3] were also studied for comparison. The structural and dynamic behavior of hydration water, the flexibility and conformation state of SAMs, and the orientation and conformation of protein were examined. Simulation results were compared with those of experiments. It appears that there is a correlation between OEG surface resistance to protein adsorption and the surface density of OEG chains, which leads to a large number of tightly bound water molecules around OEG chains and the rapid mobility of hydrated SAM chains.     

Detection of DNA Hybridization via Fluorescence Intensity Variations of ZnSe-DNA Quantum Dot Biosensors

ZnSe quantum dots (QDs) that were capped with 11-mercaptoundecanoic acid (MUA) and conjugated to amino-modified ssDNA molecules exhibited variations in fluorescence emission intensity upon hybridization with complementary ssDNA in solution, a phenomenon that can be exploited for rapid detection of free ssDNA sequences. Conjugation of MUA-capped ZnSe QDs to amino-modified ssDNA molecules resulted in increased fluorescence emission intensity and stability at room temperature. Increasing the length of the ssDNA, that was conjugated to the QDs, resulted in increased fluorescence emission intensity up to a length of about 50 nucleotide bases, beyond which the peak emission intensity reached a plateau. Hybridization of QD-ssDNA conjugates with complementary ssDNA, either in free form or bound to QDs from the same population, resulted in additional fluorescence emission intensity amplification. A small red shift was observed when three-dimensional QD-dsDNA-QD structures were formed. The QD-ssDNA sensors with single ssDNA molecule per QD were developed and used for rapid quantitative detection of fully or partially complementary free ssDNA sequences in aqueous solution. Partial hybridization of the QD-ssDNA sensors with short ssDNA targets resulted in smaller QD emission intensity amplification, when compared to full hybridization. A QD-ssDNA sensor containing a sequence corresponding to the hemoglobin beta gene was used to detect and discriminate between free ssDNA targets consisting of a complementary ssDNA sequence and targets containing a single-base mutation that can cause sickle-cell anemia. Such QD-based biosensors can form the basis for rapid separation-free assays that can be used to detect target biomolecules in solution.     

Optimized DNA hybridization detection on nanocolloidal particles by dielectrophoresis

Oligonucleotides of varying surface coverage are functionalized onto the surface of 100 nm silica particles and the corresponding hybridization reaction with target ssDNA is studied using dielectrophoresis (DEP). The measured DEP cross‐over frequency (cof) is found to be sensitive to the oligonucleotide surface conformation. Zeta potential and particle size measurements suggest that at low oligo surface concentrations, non‐specific binding of oligo to the particle surface prevents efficient hybridization. At high surface coverage, steric hindrance due to the fully stretched, tightly packed oligo conformation prevents diffusion of DNA molecules to the particle surface. The optimum surface coverage exists at intermediate coverage where the particle is found to be the least electrically conductive, and hence exhibits the lowest measured cof. A simple DEP cof measurement hence allows one to determine the optimal oligo surface coverage for increased hybridization efficiency and detection sensitivity.     

Immobilization of single-stranded deoxyribonucleic acid on gold electrode with self-assembled aminoethanethiol monolayer for DNA electrochemical sensor applications

A synthesized 24-mer single-stranded deoxyribonucleic acid (ssDNA) was covalently immobilized onto a self-assembled aminoethanethiol monolayer modified gold electrode, using water-soluble 1-ethyl-3(3-dimethylaminopropyl)-carbodiimide (EDC). The covalently immobilized ssDNAs were hybridized with complementary ssDNA (cDNA) or yAL(3) gene in solution, forming double-stranded DNAs (dsDNA). Meanwhile, daunomycin as an electrochemical active intercalator in the hybridization buffer solution was intercalated into the dsDNA to form a dsDNA/daunomycin system on the gold electrode surface, which was used for DNA electrochemical sensor. The cathodic waves of daunomycin bound to the double-stranded DNA (dsDNA) by linear sweep voltammetry were utilized to detect the cDNA. The cathodic peak current (i(pc)) of duanomycin was linearly related to the concentrations of cDNA between 0.1 mug ml(-1) and 0.1 ng ml(-1). The detection limit was about 30 pg ml(-1).     

微囊藻属DNA电化学传感器的研制

利用自组装法将巯基修饰的DNA探针与6-巯基-1-己醇(MCH)固定到金电极表面,制备了微囊藻属特定DNA传感器,将该传感器与完全互补的微囊藻DNA序列、完全不互补序列,以及单碱基错配序列进行杂交,以Hoechst 33258为杂交指示剂,应用循环伏安法和线性扫描伏安法研究了该传感器对目标DNA的电化学检测行为.研究表明,当与完全互补DNA杂交后,Hoechst 33258氧化信号有明显的增强.实验对自组装时间、MCH浸泡时间及杂交液离子浓度进行了优化.结果表明,当自组装时间为90 min,MCH浸泡时间为1 h,杂交溶液中NaCl浓度为0.3 mol/L时,电化学信号最好.目标DNA的氧化峰电流值与其浓度在1×10~(-8) ～1×10~(-6) mol/L范围内呈良好的线性关系,检出限为8.1×10~(-9) mol/L.     

Functionalized self-assembled monolayers on ultraflat gold as platforms for single molecule force spectroscopy and imaging

Single molecule force spectroscopy is a valuable tool for studying unfolding and nanomechanical properties of proteins. The common practice is to stretch proteins from a surface that was dosed to give a reasonable hit rate and to analyze the curves that exhibit the expected characteristics of a single polymer. Whether the surface-bound proteins are indeed single and isolated remains unclear, and the undesirable protein/surface interactions that obscure informative features of the force curves are implicitly assumed to be absent. In this study, mixed self-assembled monolayers (SAMs) consisting of N-hydroxysuccinimide (NHS) and oligoethylene glycol (OEG) terminated thiols on an ultraflat gold surface were used to covalently immobilize proteins via lysine residues. By the optimization of attachment sites via lysine-NHS linkages amidst a protein-resistant layer of the OEG SAM, it was possible to isolate single proteins for study in a controlled fashion. The single protein distribution on the surface is clearly demonstrated by atomic force microscopy (AFM) imaging. The OEG also significantly reduces nonspecific tip-surface interactions between the cantilever and surface. Stretching covalently attached single proteins produces high-quality and reproducible force-extension curves. This experimental strategy is an attractive platform with which to study protein structure, interactions, and nanomechanical properties of single proteins.     

Protein-resistant self-assembled monolayers on gold with latent aldehyde functions

In the present study, oligo(ethylene glycol) (OEG)-linked alkanethiols were synthesized which carry a vicinal diol on one end of the OEG chain. After self-assembled monolayer (SAM) formation on gold, the vicinal diols were converted into aldehyde functions by exposure to aqueous NaIO4, as previously used for SAMs with OEG chains buried in the center of the SAM [Jang et al. Nano Lett. 2003, 3, 691-694]. Mixed SAMs with latent aldehydes on 5% of the OEG termini showed high protein resistance, which greatly slowed the kinetics of protein coupling on the time scale of minutes. Small bioligands (such as biocytin hydrazide) or small heterobifunctional crosslinkers (maleimidopropionyl hydrazide, pyridyldithiopropionyl hydrazide) with hydrazide functions were efficiently bound to the aldehyde functions on the SAM, providing for specific capture of streptavidin or for fast covalent binding of proteins with free thiols or maleimide functions, respectively. In conclusion, OEG-terminated SAMs with latent aldehydes serve as protein-resistant sensor surfaces which are easily functionalized with small ligands or with heterobifunctional crosslinkers to which the bait molecule is attached in a subsequent step.     

Liquid crystal-based detection of DNA hybridization using surface immobilized single-stranded DNA

The authors have investigated (a) the self-assembly of single-stranded DNA (ssDNA) on glass surfaces, and (b) the interaction of DNA with liquid crystals (LCs) on solid surfaces. The results suggest that ssDNA (compared to dsDNA) on the solid interface causes particularly different orientations in LCs. The LC molecules assume a uniform homeotropic orientation on the surface with a typical surface ssDNA coverage of ~2.4 × 10¹² molecules per square cm. Once complementary DNA is hybridized on the surface, the homotropic orientation of the LCs becomes disrupted. This orientation transition can be visually observed by using a crossed polarizer. The findings were exploiting to design an assay for target DNA (= analyte DNA) that has an ~0.1 nM detection limit. The assay is highly selective and can easily differentiate target DNA from single-base mismatch and non-complementary DNA. In our perception, it represents a powerful, label-free and portable DNA detection scheme.

Open image in new window

Graphical abstract Schematic illustration of the mechanism for orientation behavior of a liquid crystal film supported on different surfaces. The homeotropic orientation of LC molecules was induced by ssDNA with appropriate surface coverage and was disrupted by ssDNA with lower or higher surface coverage or P1/T1 complex. 5CB: 4-Cyano-4′-pentylbiphenyl. TEA: Triethoxysilylbutyraldehyde.

     

Characterization of single-stranded DNA on chitosan-modified electrode and its application to the sequence-specific DNA detection

Single-strand DNA could bind with chitosan on a platinum electrode via forming a tight DNA-chitosan complex. The salt concentration of the ssDNA solution had an obvious effect on the surface coverage, the immobilization was remarkably reduced at high salt concentration. The sample ssDNA immobilized on the chitosan-modified electrode can hybridize efficiently with the complementary sequences and be successfully used for the sequence-specific DNA detection. The same results could be obtained using a gold or graphite electrode modified with chitosan. The stability of this electrode has been also discussed.     

Characterization of single-stranded DNA on chitosan-modified electrode and its application to the sequence-specific DNA detection

Single-strand DNA could bind with chitosan on a platinum electrode via forming a tight DNA-chitosan complex. The salt concentration of the ssDNA solution had an obvious effect on the surface coverage, the immobilization was remarkably reduced at high salt concentration. The sample ssDNA immobilized on the chitosan-modified electrode can hybridize efficiently with the complementary sequences and be successfully used for the sequence-specific DNA detection. The same results could be obtained using a gold or graphite electrode modified with chitosan. The stability of this electrode has been also discussed.     

Voltammetric determination of DNA hybridization using methylene blue and self-assembled alkanethiol monolayer on gold electrodes

An electrochemical DNA biosensor based on the recognition of single stranded DNA (ssDNA) by hybridization detection with immobilized complementary DNA oligonucleotides is presented. DNA and oligonucleotides were covalently attached through free amines on the DNA bases using N-hydroxysulfosuccinimide (NHS) and N-(3-dimethylamino)propyl-N′-ethylcarbodiimide hydrochloride (EDC) onto a carboxylate terminated alkanethiol self-assembled monolayers (SAM) preformed on a gold electrode (AuE). Differential pulse voltammetry (DPV) was used to investigate the surface coverage and molecular orientation of the immobilized DNA molecules. The covalently immobilized probe could selectively hybridize with the target DNA to form a hybrid on the surface despite the bases being attached to the SAM. The changes in the peak currents of methylene blue (MB), an electroactive label, were observed upon hybridization of probe with the target. Peak currents were found to increase in the following order: hybrid-modified AuE, mismatched hybrid-modified AuE, and the probe-modified AuE which indicates the MB signal is determined by the extent of exposed bases. Control experiments were performed using a non-complementary DNA sequence. The effect of the DNA target concentration on the hybridization signal was also studied. The interaction of MB with inosine substituted probes was investigated. Performance characteristics of the sensor are described.     

Electrochemical detection of a Vibrio parahaemolyticus sequence-specific gene based on a gold electrode modified with a single stranded probe

An electrochemical DNA biosensor for specific-sequences detection of Vibrio parahaemolyticus (VP) was fabricated. A single-stranded 20-mer oligonucleotide (ssDNA) and 6-mercapto-1-hexanol (MCH) were immobilized via a thiol linker on gold disk electrodes by self-assembling. The ssDNA underwent hybridization in a hybridization solution containing complementary or non-complementary or single base pair mismatched DNA sequences of VP. Examination of changes in response to these three target DNAs showed that the developed biosensor had a high selectivity and sensitivity.     

Detection of bar gene encoding phosphinothricin herbicide resistance in plants by electrochemical biosensor

An electrochemical biosensor for the detection of bar gene coding phosphinothricin herbicide resistance is presented. The detection was based on hybridization reaction between the specific to bar gene 19-mer probe immobilized on the electrode surface and complementary DNA in a sample. Single-stranded DNA probe specific to bar gene was covalently attached by 5'-phosphate end to the surface of carbon paste electrode. Outer layer of a conventional CPE was provided with carboxyl groups of stearic acid. ssDNA was coupled to the electrode through ethylenediamine with the use of water-soluble 1-ethyl-3(3'-dimethylaminopropyl)-carbodiimide and N-hydroxy-sulfosuccinimide as activating reagents. Hybridization reaction at the electrode surface was detected via Co(bpy)(3)(3+), which possess a much higher affinity to the resulting DNA duplex compared to ssDNA probe. Detection limit of the sensor was 0.1 microM of target DNA fragments and its response was linear from 5 to 20 microM. Hybridization event was also detected by measuring guanine peak but this approach presented distinctly higher detection limit (1 muM) and lower reproducibility. Complete time of one measurement with the use of the biosensor including covalent attachment of ethylenediamine (linker) and ssDNA probe to the electrode, hybridization with target and interaction with electroactive indicator was about 70 min.     

Poly(dG) spacers lead to increased surface coverage of DNA probes: an XPS study of oligonucleotide binding to zirconium phosphonate modified surfaces

A spacer is often employed between the surface linking group and the probe sequence to improve the performance of DNA microarrays. Previous work demonstrated that a consecutive stretch of guanines as a spacer increased target capture during hybridization relative to probes with either no spacer or a similar stretch of one of the other nucleotides. Using zirconium phosphonate modified surfaces with 5'-phosphorylated ssDNA probes, the present study compares the surface coverage of ssDNA probes containing either a poly(dG) spacer or a poly(dA) spacer. Surface coverages are quantified by XPS using a modified overlayer model. The results show that after treatment to mimic conditions of the passivation and hybridization steps the probe with the poly(dG) spacer has about twice the surface coverage as the probe with the poly(dA) spacer, indicating that increased target capture is due to higher probe coverage. When monitoring the surface coverage after each rinsing step, it is observed that the probe with the poly(dA) spacer is more susceptible to rinsing, suggesting the interaction with the surface is different for the two probes. It is suggested that the formation of G quadruplexes causes an increased avidity of the probe for the zirconium phosphonate surface.     

Considerations for the quantitative transduction of hybridization of immobilized DNA

Immobilized single-stranded DNA (ssDNA) can be used as a selective ‘reagent’ to bind complementary DNA or RNA for applications such as the detection of pathogenic organisms, gene therapy agents and genetic mutations. The density of ssDNA on a surface will determine the charge density due to ionizable phosphate groups. Such a negatively charged interface will attract positive counter-ions from solution, which may result in a local ionic strength, pH and dielectric constant on the surface that is substantially different from that in bulk electrolyte solution. It is the local conditions which influence the thermodynamics of hybridization, and this can studied by the melt temperature (T_m) of double-stranded DNA (dsDNA). Experimental work and theoretical models have been used to examine whether hybridization reactions on a surface can cause dynamic changes in local charge density, and therefore, changes in selectivity and drift in calibration for quantitative analysis. Organosilane chemistry has been used to covalently immobilize hexaethylene glycol linkers and to control the subsequent density of dT₂₀ that was prepared by automated synthesis. Fiber-optic biosensors based on fused silica that was coated with DNA were used in a total internal reflection fluorescence instrument to determine T_m from the dissociation of duplexes of fluorescein-labeled dA₂₀ : dT₂₀. The experimental results suggest that the thermodynamic stability of duplexes that are immobilized on a surface is dependent on the density of immobilized DNA and on the extent of hybridization of DNA. The experimental results show that the thermodynamic stability of immobilized dsDNA is significantly different than that of dsDNA in bulk solution, and include observations of the variation of enthalpy at different ionic strengths, asymmetry in the melt curves, and the possibility of a reduced dielectric constant within a DNA layer relative to that in bulk solution.     

超顺磁性DNA纳米富集器应用于痕量寡聚核苷酸的富集

随着纳米技术的迅速发展 ,纳米材料逐渐被应用到细胞生物学和分子生物学研究领域 ,为生物医学的研究和发展提供了新的技术和手段 [1～ 4 ] .如超顺磁性纳米颗粒由于具有尺寸小、比表面积大、悬浮稳定性好及在外磁场作用下的磁导向性运输和富集等优良特性 ,使其在细胞和生物活性     

巯基修饰单链DNA在纳米金薄膜电极上自组装、杂交和取向的电化学交流阻抗谱

利用电化学交流阻抗技术对SH-ssDNA在纳米金薄膜电极表面的自组装、杂交和取向进行了系统表征。 探讨了SH-ssDNA的组装时间、浓度和链长对其自组装的影响,自组装15 h时电荷传递电阻Rct最大,表面覆盖率最高;研究了SH-ssDNA的浓度、链长以及与互补DNA的杂交方式对杂交反应的影响。 结果发现,随着单链浓度的增加,杂交后R_ct的变化值逐渐降低,当SH-ssDNA为5 μmol/L时Rct值比杂交前增加了16%。 通过对阻抗谱数据模拟和分析,表明SH-ssDNA以垂直竖立取向在金电极表面形成均匀致密单分子层,杂交效率与SH-ssDNA的覆盖率密切相关。     

Detection of mismatched DNA on partially negatively charged diamond surfaces by optical and potentiometric methods

The effects of surface charge density on DNA hybridization have been investigated on a mixture of hydrogen-, oxygen-, and amine-terminated diamond surfaces. A difference in the hybridization efficiencies of complementary and mismatched DNA was clearly observed by fluorescence and potentiometric observations at a particular coverage of oxygen. In the fluorescence observation, singly mismatched DNA was detected with high contrast after appropriate hybridization on the surface with 10-20% oxygen coverage. The amount of oxygen in the form of C-O(-) (deprotonated C-OH) producing the surface negative-charge density was estimated by X-ray photoelectron spectroscopy. Electrolyte solution gate field-effect transistors (SGFETs) were used for potentiometric observations. The signal difference (change in gate potential) on the SGFET, which was as large as approximately 20 mV, was caused by the difference in the hybridization efficiencies of complementary target DNA (cDNA) and singly mismatched (1MM) target DNA with a common probe DNA immobilized on the same SGFET. The reversible change in gate potential caused by the hybridization and denaturation cycles and discriminating between the complementary and 1MM DNA targets was very stable throughout the cyclical detections. Moreover, the ratio of signals caused by hybridization of the cDNA and 1MM DNA targets with the probe DNA immobilized on the SGFET was determined to be 3:1 when hybridization had occurred (after 15 min on SGFET), as determined by real-time measurements. From the viewpoint of hybridization kinetics, the rate constant for hybridization of singly mismatched DNA was a factor of approximately 3 smaller than that of cDNA on this functionalized (oxidized and aminated) diamond surface.