Studies on novel thermally stable segmented polyurethanes based on thiourea-derivative diols

Novel thermoplastic segmented poly(urethane-thiourea)s (PURs) were synthesized via one-step polymerization from aromatic diols containing sulfur (thiourea linkage) in the main-chain, including terephthaloyl bis (3-(2-hydroxopyridyl) thiourea) (TBHPT) and terephthaloyl bis (3-(5-naphtholyl) thiourea) (TBNT), along with 1,4-phenylene diisocyanate (PDI) as hard segment and 20, 50 and 80 mol% polyethylene glycol (PEG) as a soft segment. The prepared chain extenders and polymers were characterized by conventional methods, and physical properties such as η_inh, solubility, thermal stability and thermal behavior were studied. Easily processable PURs with excellent thermal stability were obtained by incorporating 20 mol% PEG in the soft segment. Thermogravimetric analysis indicated that poly(urethane-thiourea)s were fairly stable above 500 °C and own high glass transition temperatures about 263-266 °C. These polymers also showed partially crystalline structures. Ultimately, weight average molecular weights (M_w) of PURs were up to 109 × 10³. Compared to typical polyurethanes, PURs exhibited better thermal stability and T_g’s owing to rigid hard segment structure.     

Studies on thermoplastic polyurethanes based on new diphenylethane-derivative diols. II. Synthesis and characterization of segmented polyurethanes from HDI and MDI

Various new thermoplastic segmented polyurethanes were synthesized by a one-step melt polymerization from aliphatic-aromatic α,ω-diols containing sulfur in the aliphatic chain, including 4,4′-(ethane-1,2-diyl)bis(benzenethioethanol), 4,4′-(ethane-1,2-diyl)bis(benzenethiopropanol) and 4,4′-(ethane-1,2-diyl)bis(benzenethiodecanol) as chain extenders, hexane-1,6-diyl diisocyanate (HDI) or 4,4′-diphenylmethane diisocyanate (MDI) and 20-80 mol% poly(oxytetramethylene)diol (PTMO) with molecular weight of 1000 g/mol as a soft segment. The reaction was conducted at the molar ratio of NCO/OH = 1 and 1.05, and in the case of the HDI-based polyurethanes in the presence of dibutyltin dilaurate as a catalyst. The effect of the diisocyanate used on the structure and some physicochemical, thermal and mechanical properties of the segmented polyurethanes were studied. The structures of these polyurethanes were examined by FTIR and X-ray diffraction analysis. The thermal properties were investigated by differential scanning calorimetry and thermogravimetric analysis. Shore hardness and tensile properties were also determined. All the synthesized polymers showed partially crystalline structures. The MDI-based polyurethanes were products with lower crystallinity, higher glass-transition temperature (T_g) and better thermal stability in comparison with the HDI-based ones. The MDI series polymers also exhibited higher tensile strength (up to ∼36 MPa vs. ∼23 MPa) and elongation at break (up to ∼3900% vs. ∼900%), but lower hardness than the analogous HDI series polyurethanes. In both series of the polymers an increase in PTMO soft-segment content was associated with decreased crystallinity, T_g, hardness and tensile strength. An increase in PTMO content also involved an increase in elongation at break.     

Synthesis and degradation profile of cast films of PPG-DMPA-IPDI aqueous polyurethane dispersions based on selective catalysts

Waterborne polyurethane (WBU) dispersions synthesized from poly(propylene glycol) (PPG), dimethylolpropionic acid (DMPA), and isophorone diisocyanate (IPDI) with catalysts of different selectivity were prepared via by the conventional prepolymer isocyanate process. Two types of chain extenders were used, ethylene glycol (EG) and propylene glycol (PG), producing polyurethanes. The dispersions were neutralized by the addition of triethylamine. The thermal stability of the materials, obtained as cast films prepared from aqueous dispersions was evaluated by thermogravimetry (TG). It was observed that initial degradation temperatures were above 140 °C, with two-step degradation profiles. The use of a more selective catalyst in the formulations led to materials with higher thermal stability. DTG curves exhibited stages not perceptible in the curves of weight loss, which were mainly influenced by the differences in the formulations. Thermal decomposition of the obtained polyurethanes was followed by TG coupled with FTIR spectroscopy.     

Chain-Extended Polyurethane Anionomers Using Fluorescin

Abstract

Polyurethanes were synthesized by chain extension of isocyanate end-capped prepolymer based on poly(tetramethylene oxide) glycol and toluene diisocyanate using fluorescin. The polyurethanes were characterized using FT-IR and FT-NMR. The polyurethanes were converted to their anionomers by treatment with the respective metal acetates. To study the changes accompanying ionomer formation, especially in the soft segment, differential scanning calorimetry experiments were performed in the low temperature region. Thermal stabilities of the polymers and ionomers were studied using a thermogravimetric analyzer.     

Thermal properties of polyurethanes synthesized using waste polyurethane foam glycolysates

In this work thermal transitions and thermal stability of polyurethane intermediates and polyurethanes were investigated. The intermediates were obtained by glycolysis of waste polyurethane (PUR) in the reaction with hexamethylene glycol (HDO). The excess of HDO was not separated from the product after the glycolysis process was finished. The effects of different mass ratio of HDO to PUR foam on selected physicochemical properties (hydroxyl number, Brookfield viscosity and density) were also determined. The polyurethanes were synthesized from the obtained intermediates by the prepolymer method using diisocyanate (MDI) and glycolysis product of molecular mass in range 700/1000 g mol^–1. Hexamethylene glycol, 1,4-butanediol and ethylene glycol were used as chain extender agents. Influence of NCO groups concentration in prepolymer on glass transition temperature (T _g) and storage and loss modulus (E’, E’’) of polyurethanes were investigated by the DMTA method. Thermal decomposition of obtained glycolysates and polyurethanes was followed by thermogravimetry coupled with Fourier transform infrared spectroscopy. Main products of thermal decomposition were identified.     

Amine-quinone polyurethanes. I. Preparation of polyurethane block copolymers containing 2,5–bis(N-2-hydroxyethyl-N-methylamino)-1,4–benzoquinone diol monomer

The amine-quinone monomer, 2,5–bis(N-2-hydroxyethyl-N-methylamino)-1,4-benzoqui-none (AQM-1), was prepared by the multiple-step condensation of 2-(N-methylam-ino)ethanol with benzoquinone in the presence of oxygen. This crystalline monomer was used to prepare a series of amine-quinone polyurethanes by condensation polymerization, either in the melt or in solution (THF or DMF), with a diisocyanate (MDI, TDI, or IPDI) and an oligomeric diol [poly(caprolactone) or poly(1,2-butylene glycol)]. The amine-quinone functional group was stable under the polymerization conditions, and was incorporated into the main chain, giving red-brown polyurethanes that had molecular weights in the range of 11,000–90,000 and were soluble in THF, MEK, DMF, and DMSO. The thermal properties were consistent with a two-phase morphology with an amorphous soft segment, containing the oligomeric diol, and a microcrystalline hard segment, containing AQM-1. The polymers having a low hard segment content (<50%) were rubbery (soft segment T_g <?25°C); polymers having a high hard segment content (>50%) were thermoplastic (hard segment T_g>150°C). © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of a methacrylate polymer with side chain ketone and its derivatives

A new type of methacrylate monomer,2-(4-benzoylphenoxy)-2-oxoethyl methylacrylate(BOEMA) was synthesized.The radical homopolymerization of BOEMA was performed at 65℃in a 1,4-dioxane solution with benzoyl peroxide as an initiator.The oxime and thiosemicarbazone derivatives of poly[2-(4-benzoylphenoxy)-2-oxoethyl methylacrylate]poly(BOEMA) were prepared with hydroxylamine hydrochloride,and thiosemicarbazone hydrochloride, respectively.The monomer and its homopolymer were characterized with Fourier transform infrared and NMR techniques. The thermal stabilities of poly(BOEMA) and its derivatives were investigated with thermogravimetric analysis and differential scanning calorimetry.The ultraviolet stability of the polymers was compared.The antibacterial and antifungal effects of the monomer and the polymer and its derivatives were also investigated on various bacteria and fungi.The activation energies of the thermal degradation of the polymers were calculated with the Ozawa and Kissinger methods.     

Novel thermally stable poly(thiourea-amide-imide)s bearing CS moieties and pyridine units in the backbone: Synthesis and properties

Novel thermally stable and organosoluble poly(thiourea-amide-imide)s (PTAIs) were synthesized through the condensation of various diamines with a new kind of aromatic diacid chloride monomer containing pyridine units, 2-(3-(2-(3-(chlorocarbonyl)pyridin-2-yl)-1,3-dioxoisoindoline-5-carbonyl) thioureido) nicotinoyl chloride, CPDITNC. Spectroscopic and elemental analyses were carried out for the structure elucidation of synthesized monomers. Accordingly, the ensuing PTAIs were characterized by FTIR, ¹H and ¹³C NMR techniques along with crystallinity, organosolubility, inherent viscosity and GPC measurements. Consequently, polymers bearing phenyl thiourea and pyridine moieties in the backbone exhibited good organosolubility in a variety of highly polar solvents such as DMAc, DMF, DMSO and NMP. PTAIs encompassed η_inh of 1.24-1.46 dL/g and two of the polymers showed crystalline behavior. Moreover, GPC measurements of polymers revealed M_w around 33,000-50,000. Thermal stability of these polymers was ascertained via 10% weight loss temperatures in the range of 548-562 °C (inert atmosphere). Ultimately, these polymers own high glass-transition temperatures about 264-270 °C.     

Liquid crystalline properties of unsegmented and segmented polyurethanes synthesised from high aspect ratio mesogenic diols

A series of novel tetrad high aspect ratio mesogenic diol monomers 4-{[4-(n-hydroxyalkoxy)-phenylimino]-methyl}-benzoic acid 4-{[4-(n-hydroxyalkoxy)-phenylimino]-methyl}-phenyl ester were prepared with varying alkoxy spacer length (n=2,4,6,8,10) by reacting 4-formylbenzoic acid 4-formylphenyl ester and 4-(n-hydroxyalkoxy) anilines. Two series of thermotropic main chain liquid crystalline unsegmented polyurethanes (PUs) were obtained by the polyaddition of the mesogenic diols with hexamethylene diisocyanate (HMDI) and methylene bis(cyclohexylisocyanate) (H₁₂MDI) in dimethylformamide respectively. The effect of the incorporation of a third component namely polyol on the liquid crystalline properties of the polyurethanes was also studied. Linear segmented PUs were synthesised by a two-step block copolymerisation method. The PUs synthesised were based on six spacer mesogenic diol chain extender, soft segments poly(tetramethylene oxide)glycol (PTMG) (M_n= 650,1000,2000) and polycaprolactone diol (PCL) (M_n=530,1250,2000) of varying molecular weights and different diisocyanates including HMDI, H₁₂MDI and methylene bis(phenylene isocyanate) (MDI). Structural elucidation was carried out by elemental analysis, fourier transform infra red (FT-IR), nuclear magnetic resonance (¹H NMR and ¹³C NMR) spectroscopy. Inherent viscosity of the unsegmented polymers measured in methanesulphonic acid at 26°C was in the range of 0.13 - 0.65 dL/g while the molecular weights and molecular weight distribution of the segmented polyruethanes was determined using gel permeation chromatography (GPC). Mesomorphic properties were studied by differential scanning calorimetry (DSC) and hot stage polarising optical microscopy and the thermal stability was determined by thermogravimetric(TG)analysis. The monomeric diols and the polyurethanes exhibited nematic texture and good mesophase stability. It was observed that the partial replacement of the mesogenic diol by the polyol of varying molecular weights influenced the phase transitions and the occurrence of mesophase textures. The phase transition temperatures of the investigated polyurethanes showed dependence on the chain length of the soft segment and on the content of the mesogen moiety. A higher content of mesogenic moiety was needed to obtain liquid crystalline property when the soft segment length was increased as observed in the case of PTMG. Grained and threaded textures were observed depending on the molecular weight of the soft segment, the mesogen content and the diisocyanate. The stress-strain analyses showed that the polymers bused on high molecular weight PTMG soft segment have elastomeric property while the PCL based PUs displayed no elastomeric property.     

Synthesis and properties of polymers containing aromatic amino groups in the main chain and their glass-forming model compounds

Polymers containing di(carbazol-3-yl)phenylamine and N,N^′-di(carbazol-3-yl)-N,N^′-diphenyl-1,4-phenylenediamine units in the main chain have been synthesized by a modified Ullmann condensation as a key step. The number-average molecular weights of the polymers synthesized were in the range of 2300-4800 with a molecular weight distribution of 1.42-2.25. Well defined model compounds of the title polymers were synthesized by stepwise reactions. All the materials exhibit high thermal stability with the initial weight loss temperatures exceeding 320 °C and form glasses. Their glass transition temperatures range from 102 to 216 °C as characterised by differential scanning calorimetry. The electron photoemission spectra of thin films of the synthesized compounds have been recorded and the ionisation potentials of 5.0-5.1 eV have been established.     

Waterborne polyurethanes and their properties

Anionomer-type waterborne polyurethanes (PUs) were obtained from poly(β-methyl-δ-valerolactone) glycol (PMVL) and isophorone diisocyanate, following a prepolymer mixing process. The soft-hard segment phase separation in response to the variations of composition and structure of PU has been studied from the dynamic mechanical measurements of the emulsion cast films. The structural variation included ionic and hard segment content, molecular weight of NCO-terminated prepolymer, and type and length of the soft segment. It was found that phase separation is more sensitive to the soft segment length, rather than the soft segment content. With only phase separation, the rubbery modulus was significant even with lower hard segment content. Phase separation was much more pronounced with PU from poly(tetramethylene adipate) glycol, rather than from PMVL and poly(caprolactone) © 1996 John Wiley & Sons, Inc.     

Synthesis of phosphorus-containing polyurethanes without use of isocyanates

Phosphorus-containing polyurethanes were synthesized by reacting phosphonic acid diesters (RO)₂P(O)X (X = H, CH₃, Ph) with hydroxycarbamates. These phosphorus-containing polyurethanes were characterized by a combination of molecular-weight determination (GPC) and NMR spectroscopy. The thermal stability of the polymers was evaluated by a combination of TGA and DTA techniques. These polymers are readily soluble in highly polar solvents like DMF and DMSO. The phosphorus-containing polyurethanes are water soluble. © 1996 John Wiley & Sons, Inc.     

Synthesis, characterization and photocrosslinking properties of polyacrylamides having bromo substituted pendant cinnamoyl moieties

New 3- and 4-bromocinnamoyl aniline were synthesized condensing 4-aminoacetophenone and the respective bromobenzaldehydes in the presence of sodium hydroxide. The monomers, 4-(3′-bromocinnamoyl) phenyl acrylamide (4,3′-BCPA) and 4-(4′-bromocinnamoyl) phenyl acrylamide (4,4′-BCPA) were prepared by reacting the respective chalcones and acryloyl chloride in the presence of triethylamine at 0-5 °C. Homopolymers of 4,3′-BCPA and 4,4′-BCPA was carried out in methyl ethyl ketone using benzoyl peroxide (BPO) under nitrogen atmosphere at 70 °C. The prepared polymers were characterized by UV, IR, ¹H-NMR and ¹³C-NMR techniques. The molecular weights (M_w and M_n) of the polymers were determined by gel permeation chromatography. The thermogravimetric analysis (TGA) of the polymers in nitrogen atmosphere reveals that they possess very good thermal stability required of a negative type photoresist. The glass transition temperature of poly(4,3′-BCPA) and poly (4,4′-BCPA) were found to be 55 and 64 °C respectively. The solubility of the polymers was tested in various polar and non-polar solvents. Photocrosslinking nature of the polymer samples was carried out in the presence and absence of various triplet photosensitizers in solution phase using chloroform solvent under medium frequency UV light. For using the polymers as negative photoresist materials the rate of photocrosslinking of the polymers was measured under the influence of different solvents, concentrations and position of the substituent.     

AB CROSSLINKED POLYURETHANES THROUGH IONIC CROSSLINKING: INFLUENCE OF CROSSLINKING NETWORKS ON PHYSICO CHEMICAL PROPERTIES

Isocyanate-terminated prepolymers were synthesized using poly(tetramethylene oxide)glycol of molecular weight 1000 (PTMG₁₀₀₀) with tolylene-2,4-diisocyanate (TDI). The prepolymers were chain extended with N-methyldiethanolamine (N-MDEA) to form polyurethanes containing tertiary nitrogen. These polyurethanes were crosslinked with bromine terminated polyurethane, poly(urethane-imide), and poly(urethane-siloxane) through the formation of cationomers at tertiary nitrogen sites across the backbone polyurethanes.

The crosslinked cationomeric polyurethanes were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), mechanical analyses, (static and dynamic), and static contact angles measurements. FTIR spectral studies confirms the formation of bromine terminated poly(urethane-imide) and poly(urethane-siloxane), as well as quaternization of the tertiary nitrogen which leads to crosslinking. A comparison of thermal stabilities of crosslinked polymers with respect to the chemical nature of bromine terminated prepolymers (BTP) indicates improved thermal stability for poly(urethane-imide) based ABCP. Stress-strain analysis shows high elongation values for poly(urethane-siloxane) and poly(urethane-imide) based ABCPs. Dynamic mechanical analysis reveals better damping for poly(urethane- siloxane) based AB crosslinked polymers.     

Novel processable and heat resistant poly(phenylthiourea azomethine imide)s: Synthesis and characterization

N-(4-chloro-3-aminobenzal)N′(4-aminophenyl)thiourea having phenylthiourea and azomethine groups was synthesized and exploited as starting material for the fabrication of new polymers. Novel diamine was condensed with pyromellitic dianhydride, 3,3′,4,4′-benzophenone-tetrcarboxylic dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic dianhydride to obtain poly(phenylthiourea azomethine imide)s. The structural explication of monomers and poly(phenylthiourea azomethine imide)s were carried out by FTIR, ¹H and ¹³C NMR techniques along with crystallinity, organosolubility, inherent viscosity and molecular weight measurements. Accordingly, polymers bearing CS and -CN- moieties in the backbone demonstrated an amorphous nature and were readily soluble in amide solvents such as DMAc, DMF, and DMSO. Poly(phenylthiourea azomethine imide)s encompassed η_inh of 1.40-1.55 dL/g and were obtained in quantitative yields. In addition, GPC measurements of polymers revealed M_w around 60,291-67,665. Thermal stability of these polymers was ascertained via 10% weight loss temperatures around 514-533 °C in an inert atmosphere. Besides, glass transition temperatures of polyimides were found to be 272-276 °C.     

Poly(amideimide)s containing pendant pentadecyl chains: Synthesis and characterization

A new aromatic diacylhydrazide monomer viz., 4-[4′-(hydrazinocarbonyl)phenoxy]-2- pentadecylbenzohydrazide was synthesized starting from cardanol, which in turn is obtainable from cashew nut shell liquid - a renewable resource material. A series of new poly(amideimide)s containing flexibilizing ether linkages and pendant pentadecyl chains was synthesized from 4-[4′-(hydrazinocarbonyl)phenoxy]-2-pentadecylbenzohydrazide and commercially available aromatic dianhydrides, viz., benzene-1,2,4,5-tetracarboxylic dianhydride, 3,3′,4,4′-biphenyltetracarboxylic dianhydride, benzophenone-3,3′,4,4′-tetracarboxylic dianhydride, 4,4′-oxydiphthalic anhydride and 4,4′-(hexafluoro isopropylidene)diphthalic anhydride by a two-step solution polycondensation in N,N-dimethylacetamide via the poly(hydrazide acid) intermediate. Inherent viscosities of poly(amideimide)s were in the range 0.60-0.64 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C. Poly(amideimide)s could be solution cast into tough, transparent and flexible films from their N,N-dimethylacetamide solutions. The solubility of poly(amideimide)s was significantly improved by incorporation of pendant pentadecyl chains and were found to be soluble in N,N-dimethylacetamide, 1-methyl-2-pyrrolidinone, pyridine and m-cresol at room temperature or upon heating. Wide angle X-ray diffraction patterns of poly(amideimide)s revealed a broad halo at around 2θ = ∼19° suggesting that polymers were amorphous in nature. In the small-angle region, diffuse to sharp reflections of a typically layered structure resulting from the packing of pentadecyl side chains were observed. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of poly(amideimide)s was in the range of 388-410 °C indicating their good thermal stability. Glass transition temperatures of poly(amideimide)s were in the range 162-198 °C. It was observed that the plasticization effect of attached pentadecyl side chains induced the depression of T_g.     

Effect of prepolymer molecular weight on solid state polymerization of poly(bisphenol a carbonate) with nitrogen as a sweep fluid

The effect of prepolymer molecular weight on the solid‐state polymerization (SSP) of poly(bisphenol A carbonate) was investigated using nitrogen (N₂) as a sweep fluid. Prepolymers with different number–average molecular weights, 3800 and 2400 g/mol, were synthesized using melt transesterification. SSP of the two prepolymers then was carried out at reaction temperatures in the range 120–190 °C, with a prepolymer particle size in the range 20–45 μm and a N₂ flow rate of 1600 mL/min. The glass transition temperature (T_g), number–average molecular weight (M_n), and percent crystallinity were measured at various times during each SSP. The phenyl‐to‐phenolic end‐group ratio of the prepolymers and the solid‐state synthesized polymers was determined using 125.76 MHz ¹³C and 500.13 MHz ¹H nuclear magnetic resonance (NMR) spectroscopy. At each reaction temperature, SSP of the higher‐molecular‐weight prepolymer (M_n = 3800 g/mol) always resulted in higher‐molecular‐weight polymers, compared with the polymers synthesized using the lower molecular weight prepolymer (M_n = 2400 g/mol). Both the crystallinity and the lamellar thickness of the polymers synthesized from the lower‐molecular‐weight prepolymer were significantly higher than for those synthesized from the higher‐molecular‐weight prepolymer. Higher crystallinity and lamellar thickness may lower the reaction rate by reducing chain‐end mobility, effectively reducing the rate constant for the reaction of end groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4959–4969, 2008     

Degradation studies on segmented polyurethanes prepared with poly (d, l-lactic acid) diol, hexamethylene diisocyanate and different chain extenders

In order to investigate the effect of different chain extenders on degradation properties of segmented polyurethanes (SPUs), three types of segmented polyurethanes (SPU-P, SPU-O and SPU-A) based on poly (d, l-lactic acid) diol, hexamethylene diisocyanate (HDI), were synthesized with three chain extenders: peperazine (PP), 1, 4-butanediol (BDO) and 1, 4-butanediamine (BDA), respectively. Thermogravimetric analysis, activation energy and in vitro degradation were used to characterize the obtained polymers, quantitatively. The results revealed that chain extender played an important role in thermal degradation and biodegradation of polyurethanes. Thermogravimetric analysis and activation energy demonstrated that SPU-O, SPU-P and SPU-A presented best, second and weakest thermostability, respectively, and the thermal degradation mechanism of three SPUs was the same and regarded as a two-stage degradation. Data of hydrolytic degradation of the polymers during 12 weeks indicated that the in vitro degradation stability of SPU-A and SPU-P was similar, but both were better than that of SPU-O. The reason for the differences among three types of SPUs was discussed in this paper.     

Compared properties of related aromatic poly(1,3,4-oxadiazole-amide)s

Two series of aromatic poly(1,3,4-oxadiazole-amide)s have been synthesized by low-temperature solution polycondensation reaction of equimolar amounts of aromatic diamines containing preformed oxadiazole rings with diacid chlorides having silicon or hexafluoroisopropylidene groups. These polymers are soluble in polar aprotic solvents and show high thermal stability with decomposition temperature being above 400 °C and glass transition temperature in the range of 250-350 °C. The polyoxadiazole-amides have weight- and number-average molecular weights in the range of 207 000-330 000 and 77 000-131 000, respectively. Conformational parameters of these polymers were calculated by Monte Carlo method with allowance for hindered rotation and discussed in relation with thermal properties. Polymer solutions in NMP were processed into thin free-standing films that showed good mechanical properties with tensile strength in the range of 50-100 MPa, tensile modulus in the range of 2.25-3.56 GPa and elongation to break in the range of 1.65-8.58%.