Monomeric and dimeric ruthenium thiooxalate complexes: Structures of CpRu(PPh3)2SCOCO2Me and CpRu(dppe)SCOCO2Et

The hydrosulfido complexes CpRu(L)(L′)SH react with one equivalent of O-alkyl oxalyl chlorides (ROCOCOCl) to form the corresponding O-alkylthiooxalate complexes CpRu(L)(L′)SCOCO₂R (L = L′ = PPh₃ (1), (2); L = PPh₃, L′ = CO (3); R = Me (a), Et (b)). The reactions of the hydrosulfido complexes with half equivalent of oxalyl chloride produce the bimetallic complexes [CpRu(L)(L′)SCO]₂ (L = L′ = PPh₃ (4), (5); L = PPh₃, L′ = CO (6)). The crystal structures of CpRu(PPh₃)₂SCOCO₂Me (1a) and CpRu(dppe)SCOCO₂Et (2b) are reported.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.     

F NMR spectroscopy as useful tool for determining the structure in solution of coordination compounds of MF5 (M = Nb, Ta)

The salts [S(NMe₂)₃][MF₆] (M = Nb, 2a; M = Ta, 2b) and [S(NMe₂)₃][M₂F₁₁] (M = Nb, 2c; M = Ta, 2d) have been prepared by reacting MF₅ (M = Nb, 1a; M = Ta, 1b) with [S(NMe₂)₃][SiMe₃F₂] (TASF reagent) in the appropriate molar ratio. The solid state structure of 2b has been ascertained by X-ray diffraction. The 1:1 molar ratio reactions of 1a with a variety of organic compounds (L) give the neutral adducts NbF₅L [L = Me₂CO, 3a; L = MeCHO, 3b; L = Ph₂CO, 3c; L = tetrahydrofuran (thf), 3d; L = MeOH, 3e; L = EtOH, 3f; L = HOCH₂CH₂OMe, 3g; L = Ph₃PO, 3h; L = NCMe, 3i] in good yields. The complexes MF₅L [M = Nb, L = HCONMe₂, 3j; M = Nb, L = (NMe₂)₂CO, 3k; M = Ta, L = (NMe₂)₂CO, 3l; M = Nb, L = OC(Me)CHCMe₂, 3m] have been detected in solution in admixture with other unidentified products, upon 2:1 molar reaction of 1 with the appropriate reagent L. The ionic complexes [NbF₄(tht)₂][NbF₆], 4a, and [NbF₄(tht)₂][Nb₂F₁₁], 4b, have been obtained by combination of tetrahydrothiophene (tht) and 1a, in 1:1 and 2:3 molar ratios, respectively. The treatment of 1 with a two-fold excess of L leads to the species [MF₄L₄][MF₆] [M = Nb, L = HCONMe₂, 5a; M = Ta, L = HCONMe₂, 5b; M = Nb, L = thf, 5c; M = Ta, L = thf, 5d; M = Nb, L = OEt₂, 5e]. The new complexes have been fully characterised by NMR spectroscopy. Moreover, the revised ¹⁹F NMR features of the known compounds MF₅L [M = Ta, L = Me₂CO, 3n; M = Ta, L = Ph₂CO, 3o; M = Ta, L = MePhCO, 3p; M = Ta, L = thf, 3q; M = Nb, L = CH₃CO₂H, 3r; M = Nb, L = CH₂ClCO₂H, 3s; M = Ta, L = CH₂ClCO₂H, 3t], TaF₄(acac), TaF₄(Me-acac) and [TaF(Me-acac)₃][TaF₆] (Me-acac = methylacetylacetonato anion) are reported.     

Diiron-aminocarbyne complexes with amine or imine ligands: C-N coupling between imine and aminocarbyne ligands promoted by tolylacetylide addition to [Fe2{μ-CN(Me)R}(μ-CO)(CO)(NHCPh2)(Cp)2][SO3CF3]

A terminally coordinated CO ligand in the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; R = Xyl, 1b; Xyl = 2,6-Me₂C₆H₃), is readily displaced by primary and secondary amines (L), in the presence of Me₃NO, affording the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = NH₂Et, 4a; R = Xyl, L = NH₂Et, 4b; R = Me, L = NH₂Prⁱ, 5a; R = Xyl, L = NH₂Prⁱ, 5b; R = Xyl, L = NH₂C₆H₁₁, 6; R = Xyl, L = NH₂Ph, 7; R = Xyl, L = NH₃, 8; R = Me, L = NHMe₂, 9a; R = Xyl, L = NHMe₂, 9b; R = Xyl, = NH(CH₂)₅, 10). In the absence of Me₃NO, NH₂Et gives addition at the CO ligand of 1b, yielding [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(O)NHEt}(Cp)₂] (11). Carbonyl replacement is also observed in the reaction of 1a-b with pyridine and benzophenone imine, affording [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = Py, 12a; R = Xyl, L = Py, 12b; R = Me, L = HNCPh₂, 13a; R = Xyl, L = HNCPh₂, 13b). The imino complex 13b reacts with p-tolylacetylide leading to the formation of the μ-vinylidene-diaminocarbene compound [Fe₂{μ-η¹:η²- CC(Tol)C(Ph)₂N(H)CN(Me)(Xyl){(μ-CO)(CO)(Cp₂)] (15) which has been studied by X-ray diffraction.     

Diphenylphosphino(phenyl pyridin-2-yl methylene)amine palladium(II) complexes: Chemoselective alkene hydrocarboxylation initiators

The heteroditopic, P-N-chelating ligand diphenylphosphino(phenyl pyridin-2-yl methylene)amine (1) has been synthesised via a simple ‘one-pot’ procedure and its donor characteristics assessed. The neutral [MX(Y)(1-κ²-P-N)] (3, M = Rh, X = Cl, Y = CO; 4, M = Pd, X = Y = Cl; 5, M = Pd, X = Cl, Y = Me; 6, M = Pt, X = Y = Cl; 7, M = Pt, X = Cl, Y = Me; 8, M = Pt, X = Y = Me) and cationic [Pd(Me)(MeCN)(1-κ²-P-N)][Z] (9, Z = B{3,5-(CF₃)₂-C₆H₃}4; 10, Z = PF₆) complexes of 1 have been prepared and characterised. The solid-state structures of complexes 3, 4, 6 and 7 have been established by X-ray crystallography. Reactions of [PdCl(Me)(1-κ²-P-N)] towards CO and ^tBuNC have been investigated, affording the corresponding η¹-acyl (12) and -iminoacyl (14) complexes, respectively. Similar insertion chemistry is observed for the cationic derivative 9. Treatment of the acyl complex 12 with ethene at elevated pressure establishes an equilibrium between the starting material and the product resulting from insertion, 13. Under catalytic conditions, combination of palladium(II) with 1 in MeOH affords a selective initiator for the formation of 4-oxo-hexanoic acid methyl ester (15) from CO/ethene (38 bar, 90 °C).     

Self-assembly syntheses and crystal structures of triorganotin(IV) pyridinecarboxylate: 1D polymers and a 42-membered macrocycle

A series of new triorganotin(IV) pyridinecarboxylates with 6-hydroxynicotinic acid (6-OH-3-nicH), 5-hydroxynicotinic acid (5-OH-3-nicH) and 2-hydroxyisonicotinic acid (2-OH-4-isonicH) of the types: [R₃Sn (6-OH-3-nic)·L]_n (I) (R = Ph, L = Ph·EtOH, 1; R = Bn, L = H₂O·EtOH, 2; R = Me, L = 0, 3; R = n-Bu, L = 0, 4), [R₃Sn (5-OH-3-nic)]_n (II) (R = Ph, 5; R = Bn, 6; R = Me, 7; R = n-Bu, 8), [R₃Sn (2-OH-4-isonic·L)]_n (III) (R = Bn, 9, L = MeOH; R = Me, L = 0, 10; R = Ph, 11, L = 0.5EtOH) have been synthesized. All the complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy analyses. Among them, except for complexes 5 and 6, all complexes were also characterized by X-ray crystallography diffraction analysis. Crystal structures show that complexes 1-10 adopt 1D infinite chain structures which are generated by the bidentate O, O or N, O and the five-coordinated tin centers. Significant O-H?O, and N-H?O intermolecular hydrogen bonds stabilize these structures. Complex 11 is a 42-membered macrocycle containing six tin atoms, and forms a 2D network by intermolecular N-H?O hydrogen.     

Investigation on coordination modes of organotin(IV) complexes with 6-thiopurine and related ligands

The organotin(IV) complexes R₂Sn(tpu)₂ · L [L = 2MeOH, R = Me (1); L = 0: R = n-Bu (2), Ph (3), PhCH₂ (4)], R₃Sn(Hthpu) [R = Me (5), n-Bu (6), Ph (7), PhCH₂ (8)] and (R₂SnCl)₂ (dtpu) · L [L = H₂O, R = Me (9); L = 0: R = n-Bu (10), Ph (11), PhCH₂ (12)] have been synthesized, where tpu, Hthpu and dtpu are the anions of 6-thiopurine (Htpu), 2-thio-6-hydroxypurine (H₂thpu) and 2,6-dithiopurine (H₂dtpu), respectively. All the complexes 1-12 have been characterized by elemental, IR, ¹H, ¹³C and ¹¹⁹Sn NMR spectra analyses. And complexes 1, 2, 7 and 9 have also been determined by X-ray crystallography, complexes 1 and 2 are both six-coordinated with R₂Sn coordinated to the thiol/thione S and heterocyclic N atoms but the coordination modes differed. As for complex 7 and 9, the geometries of Sn atoms are distorted trigonal bipyramidal. Moreover, the packing of complexes 1, 2, 7 and 9 are stabilized by the hydrogen bonding and weak interactions.     

Reactivity studies of cyclopentadienyl ruthenium(II), osmium(II) and pentamethylcyclopentadienyl iridium(III) complexes towards 2-(2′-pyridyl)imidazole derivatives

The reaction of [CpRu(PPh₃)₂Cl] and [CpOs(PPh₃)₂Br] with chelating 2-(2′-pyridyl)imidazole (N ∩ N) ligands and NH₄PF₆ yields cationic complexes of the type [CpM(N ∩ N)(PPh₃)]⁺ (1: M = Ru, N ∩ N = 2-(2′-pyridyl)imidazole; 2: M = Ru, N ∩ N = 2-(2′-pyridyl)benzimidazole; 3: M = Ru, N ∩ N = 2-(2′-pyridyl)-4,5-dimethylimidazole; 4: M = Ru, N ∩ N = 2-(2′-pyridyl)-4,5-diphenylimidazole; 5: M = Os, N ∩ N = 2-(2′-pyridyl)imidazole; 6: M = Os, N ∩ N = 2-(2′-pyridyl)benzimidazole). They have been isolated and characterized as their hexafluorophosphate salts. Similarly, in the presence of NH₄PF₆, [Cp∗Ir(μ-Cl)Cl]₂ reacts in dry methanol with N ∩ N chelating ligands to afford in excellent yield [Cp∗Ir(N ∩ N)Cl]PF₆ (7: N ∩ N = 2-(2′-pyridyl)imidazole; 8: N ∩ N = 2-(2′-pyridyl)benzimidazole). All the compounds have been characterized by infrared and NMR spectroscopy and the molecular structure of [1]PF₆, [2]PF₆ and [7]PF₆ by single-crystal X-ray structure analysis.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Synthesis, characterization and luminescence study of dimethyl[2-(arylmethyleneimino)phenolato]gallium complexes: Crystal structure of dimethyl[N-(4-N,N′-dimethylamino) phenylmethyleneiminophenolato]gallium

Three dimethylgallium complexes of type Me₂GaL [L = 2-methoxylphenylmethyleneiminophenolato (1), N-(4-N,N′-dimethylamino)phenylmethyleneiminophenolato (2), N-(2-naphthyl)methyleneiminophenolato (3)] have been synthesized by the reaction of trimethylgallium with appropriate N-arylmethyleneiminophenol. The complexes obtained have been characterized by elemental analysis, ¹H, ¹³C{¹H} NMR, IR and mass spectroscopy, respectively. The solid structure of 2 has been determined by X-ray single crystal analysis. The gallium atom was bonded by an oxygen atom and coordinated by an imine nitrogen atom forming one five-membered ring. The stable dimmer was formed by the coordination of bridging oxygen atom of phenolate to another gallium atom. The photoluminescence of complexes 1-3 were studied. The maximum emission wavelengths of 1-3 are between 305 and 320 nm upon radiation by UV light. The electroluminescent properties of diodes using 1-3 as emitting material were measured. The blue/green electroluminescence has been observed.     

A combined experimental and theoretical study of metallic salts of thiapentadienyl, sulfinylpentadienyl and butadienesulfonyls

Alternative methods for the synthesis of the following acyclic salts (CH₂CHCHCHS)M [M = K, 1(K); Na, 1(Na); Li, 1(Li)], (CH₂CHCHCHSO)M [M = K, 2(K); Na, 2(Na)], (CH₂CHCHCHSO₂)M [M = K, 3(K); Na, 3(Na); Li, 3(Li)], (CH(Me)CHC(Me)CHSO₂)M [Me5-syn, M = K, 9(K); Na, 9(Na); Li, 9(Li), (CH(Me)CHCHC(Me)S)M [Me5-syn, M = K, 10(K); Na, 10(Na); Me5-anti, M = K, 11(K); Na, 11(Na)] are described, as a result of the activation of C-S bond in dihydrothiophenes by deprotonation with different bases. The effect of methyl substituents in the dihydrothiophenes is significant, which modifies considerably the choice of the base. The influence of the reaction conditions, type of solvent, base and dihydrothiophenes is analyzed. The NMR spectroscopy, including NOESY, ROESY and difference NOE establish the preferred U conformation for all derivatives, and support a delocalization of charge on the thiapentadienyl (1M) and sulfinylpentadienyl (2M) complexes. However, a conjugated diene structure is proposed on the butadienesulfonyl compounds (3M), in which the negative charge is delocalized in the SO₂ fragment and stabilized with the corresponding cations (M = K, Na and Li). In presence of traces of base, compounds 3M suffer a rearrangement, to the most stable S conformer, 13M. The stability of 3M depends on the size of the cation, the greater the size, the greater stability. Furthermore, a theoretical study shows that electronic and geometrical properties (energy conformers, charge distributions and relative stabilities) of the thiapentadienyl, sulfinylpentadienyl and butadienesulfonyl anions and their corresponding metal salts 1M-3M (M = Li, Na and K) shows to be in good agreement with the experimental findings.     

Syntheses, crystal structures and DFT studies of [Me3EM(CO)5] (E = Sb, Bi; M = Cr, W), cis-[(Me3Sb)2Mo(CO)4], and [Bu3BiFe(CO)4]

Syntheses of [Me₃SbM(CO)₅] [M = Cr (1), W (2)], [Me₃BiM(CO)₅] [M = Cr (3), W (4)], cis-[(Me₃Sb)₂Mo(CO)₄] (5), [^tBu₃BiFe(CO)₄] (6), crystal structures of 1-6 and DFT studies of 1-4 are reported.     

New mercury(II) and cadmium(II) complexes with (p-methylbenzoyl)methylene triphenylphosphorane: Synthesis,spectroscopic and structural characterization

Reaction of Ph₃PCHCOC₆H₄Me (L), with HgX₂ and CdCl₂·H₂O in methanol with equimolar ratios give binuclear complexes of the type [MX(μ-X){CH(PPh₃)C(O)C₆H₄Me}]₂ (M = Hg; X = Cl (1), Br (2), I (3), M = Cd; Cl(4)). The bridge-splitting reaction of binuclear complexes [MX(μ-X){CH(PPh₃)C(O)C₆H₄Me}]₂ by dimethyl sulfoxide (DMSO) yields the mononuclear complexes [MX₂{CH(PPh₃)C(O)C₆H₄Me}(OSMe₂)] (M = Hg; X = Cl (5), Br (6), I (7), M = Cd; Cl (8)). The characterization of these complexes was carried out by elemental analysis and FT-IR, ¹H, ³¹P, and ¹³C NMR spectroscopies. C-coordination of ylide and O-coordination of DMSO are demonstrated by single-crystal X-ray analysis of mononuclear complex of [HgBr₂{CH(PPh₃)C(O)C₆H₄Me}(OSMe₂)] (6). Complex 6 is monomeric with tetrahedral geometry around the metal ion.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

New route to alkylaluminum hydroxides via hydrolysis of cyclopentadienylaluminum complexes

A novel, very simple and effective synthetic method for the formation of alkylaluminum complexes with terminal hydroxy group via hydrolysis of cyclopentadienylaluminum compounds has been found. Investigations of the hydrolysis of cyclopentadienylaluminum complexes (L)Al(Me)Cp (1) and (L)Al(Et)Cp (2) (L = HC[(CMe)(2,6-ⁱPr₂C₆ H₃N)]₂) have shown that the reaction leads to the formation of (L)Al(Me)OH (3) and (L)Al(Et)OH (4), respectively. The high selectivity of the hydrolysis was revealed. The crystal structures of 1, 2 and 4 were determined.     

The effect of titanium alkoxides in the synthesis of heterobimetallic complexes by titanocene(III) alkoxide-induced metal-metal bond cleavage of metal carbonyl dimers

A series of titanocene(III) alkoxides L₂Ti(III)OR where L = Cp, R = Et(1b), ^tBu(1a), 2,6-Me₂C₆H₃(1c), 2,6-^tBu₂-4-Me-C₆H₂(1d), or L = Cp*, R = Me(2e), ^tBu(2a), Ph(2f) was synthesized and subjected to reaction with [CpM(CO)₃]₂ [M = Mo, W], [CpRu(CO)₂]₂, and Co₂(CO)₈. The Ti(III) precursors 1a, 1c, 2a, 2e, and 2f reacted with [CpM(CO)₃]₂ [M = Mo, W] to form heterobimetallic complexes L₂Ti(OR)(μ-OC)(CO)₂MCp [M = Mo, W], of which Ti and M are linked by an isocarbonyl bridge. Reactions of these Ti(III) complexes with Co₂(CO)₈ resulted in formation of Ti-Co₁ heterobimetallic complexes, from 2a, 2e, or 2f, or Ti-Co₃ tetrametallic complexes, Cp₂Ti(O^tBu)(μ-OC)Co₃(CO)₉ from 1a, 1b, or 1c. The products were characterized by NMR, IR, and X-ray crystallography. Reaction mechanisms were proposed from these results, in particular, from steric/electronic effects of titanium alkoxides.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Cationic half-sandwich complexes (Rh, Ir, Ru) containing 2-substituted-1,8-naphthyridine chelating ligands: Syntheses, X-ray structure analyses and spectroscopic studies

Reactions of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = C₆H₆, p-ⁱPrC₆H₄Me) and [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂ (M = Rh, Ir) with 2-substituted-1,8-naphthyridine ligands, 2-(2-pyridyl)-1,8-naphthyridine (pyNp), 2-(2-thiazolyl)-1,8-naphthyridine (tzNp) and 2-(2-furyl)-1,8-naphthyridine (fuNp), lead to the formation of the mononuclear cationic complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ {L = pyNp (1); tzNp (2); fuNp (3)}, [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ {L = pyNp (4); tzNp (5); fuNp (6)}, [(η⁵-C₅Me₅)Rh(L)Cl]⁺ {L = pyNp (7); tzNp (8); fuNp (9)} and [(η⁵-C₅Me₅)Ir(L)Cl]⁺ {L = pyNp (10); tzNp (11); fuNp (12)}. All these complexes are isolated as chloro or hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV/Vis spectroscopy. The molecular structures of [1]Cl, [2]PF₆, [4]PF₆, [5]PF₆ and [10]PF₆ have been established by single crystal X-ray structure analysis.     

Synthesis and molecular structures of dinuclear complexes with 1,2-dihydro-1,2-diphenyl-naphtho[1,8-c,d]1,2-diphosphole as a bridging ligand

A bisphosphine in which a PhP-PPh bond bridges 1,8-positions of naphthalene, 1,2-dihydro-1,2-diphenyl-naphtho[1,8-cd]-1,2-diphosphole (1), was used as a bridging ligand for the preparation of dinuclear group 6 metal complexes. Free trans-1, a more stable isomer having two phenyl groups on phosphorus centers mutually trans with respect to a naphthalene plane, was allowed to react with two equivalents of M(CO)₅(thf) (M = W, Mo, Cr) at room temperature to give dinuclear complexes (OC)₅M(μ-trans-1)M(CO)₅ (M = W (2a), Mo (2b), Cr (2c)). The preparation of the corresponding dinuclear complexes bridged by the cis isomer of 1 was also carried out starting from the free trans-1 in the following way. Mono-nuclear complexes M(trans-1)(CO)₅ (M = W (3a), Mo (3b), Cr (3c)) which had been prepared by a reaction of trans-1 with one equivalent of the corresponding M(CO)₅(thf) (M = W, Mo, Cr) complex, were heated in toluene, wherein a part of the trans-3a-c was converted to their respective cis isomer M(cis-1)(CO)₅. Each cis trans mixture of the mono-nuclear complexes 3a-c was treated with the corresponding M(CO)₅(thf) to give a cis trans mixture of the respective dinuclear complexes 2a-c. The cis isomer of the ditungsten complex 2a was isolated, and its molecular structure was confirmed by X-ray analysis, showing a shorter W?W distance of 5.1661(3) Å than that of 5.8317(2) Å in trans-2a.