Photo-physical and electro-optical properties of polythiophenes bearing tetrahydropyran side groups

Photo-physical and electro-optical properties of regio-regular polythiophenes functionalized with tetrahydropyran (THP) moieties tethered to the main chain by alkyl spacers are reported. Three sets of polymers were characterized. One consisted of polythiophenes in which THP groups were attached by either ethyl or undecyl side chains. The former exhibited solid state quantum yield of photoluminescence (Φ_pl) of 12%, while the undecyl analog exhibited a value of only 2.7%. Non-optimized polymer LEDs displayed orange and red emission for the ethyl and undecyl analogs, respectively. A second series of polymers investigated was based on random copolymers of 3-(2-(2-tetrahydropyranyloxy)ethyl)thiophene) and 3-hexyl, dodecyl or hexadecyl-thiophene. Polymers possessing shorter alkyl chains possessed shorter solid-state absorption and emission wavelengths but greater quantum yields of luminescence. The third series was based on random copolymers 3-(2-(2-tetrahydropyranyloxy)ethyl)thiophene) with various amounts of 3-hexylthiophene. As the 3-hexylthiophene content was reduced, the solid-state absorption and emission wavelengths decreased, while quantum yields of luminescence increased. Differences in luminescent properties are explained on the basis of extent of interchain aggregation induced by π–π intermolecular interactions and/or local ordering/disordering of alkyl chains.     

SYNTHESIS OF SOLUBLE POLY(3-HEXYL-2,5-THIENYLENE VINYLENE) FROM THIOPHENE

INTRODUCTIONConjugated polymers have attracted more and more attention since the discovery of highly conductivepolyacetylene[1-3]. Their possible applications in sensors, and electroluminescene devices[4-5] etc. have alsostimulated the synthesis of new conjugated polymers. Because of the presence of π-conjugated bonds in thebackbone, they have band structures (such as the energy level of HOMO and LUMO, bandgap etc.) similar tothose of inorganic semiconductors such as silicon; conjugat…     

Antimony‐Functionalized Phosphine‐Based Photopolymer Networks

The synthesis of phosphane‐ene photopolymer networks, where the networks are composed of crosslinked tertiary alkyl phosphines are reported. Taking advantage of the rich coordination chemistry of alkyl phosphines, stibino‐phosphonium and stibino‐bis(phosphonium) functionalized polymer networks could be generated. Small‐molecule stibino‐phosphonium and stibino‐bis(phosphonium) compounds have been well characterized previously and were used as models for spectroscopic comparison to the macromolecular analogues by NMR and XANES spectroscopy. This work reveals that the physical and electronic properties of the materials can be tuned depending on the type of coordination environment. These materials can be used as ceramic precursors, where the Sb‐functionalized polymers influence the composition of the resulting ceramic.     

Synthesis and characterization of arylenevinylenearylene–naphthalene diimide copolymers as acceptor in all–polymer solar cells

Two n‐type conjugated D‐A copolymers, P(TVT‐NDI) and P(FVF‐NDI) with thienylene‐vinylene‐thienylene (TVT) or furanylene‐vinylene‐furanylene (FVF) as donor (D) units and naphthalene diimide (NDI) as the acceptor (A) units, were synthesized by the Stille coupling copolymerization. The two polymers possess good solubility, high thermal stability, and broad absorption bands with absorption edges at 866 nm for P(TVT‐NDI) and 886 nm for P(FVF‐NDI) . The LUMO energy levels of P(TVT‐NDI) and P(FVF‐NDI) are ?3.80 eV and ?3.76 eV respectively, so the two polymers are suitable for the application as acceptor in blending with most polymer donor in PSCs based on the energy level matching point of view. All polymer solar cells (all‐PSCs) were fabricated with P(TVT‐NDI) or P(FVF‐NDI) as acceptor and medium bandgap polymer J51 as donor for investigating the photovoltaic performance of the two n‐type conjugated polymer acceptors. And higher power conversion efficiency of 6.43% for P(TVT‐NDI) and 5.21% for P(FVF‐NDI) was obtained. The results indicate that arylenevinylenearylene–naphthalene diimide copolymer are promising polymer acceptor for all–PSCs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1757–1764     

Conjugated polymer liquid crystal solutions: control of conformation and alignment

Stable solutions of conjugated poly(phenylene vinylene)s and poly(phenylene ethynylene)s in nematic liquid crystals are reported. The polymers all contain triptycene units fused into their backbones to obtain the high solubility needed to maintain solubility in complex liquid crystalline media. The polymer backbones align with the director of the nematic liquid crystal, and by applying electric fields the polymers can be reoriented. The polymers all displayed lower band gaps in the liquid crystal solvents relative to those obtained in standard solvents such as methylene chloride. Hence, the liquid crystal solution induces a chain-extended highly conjugated structure in the polymers, which is generally associated with optimization of the polymer properties.     

3,6‐Dialkylthieno[3,2‐b]thiophene moiety as a soluble and electron donating unit preserving the coplanarity of photovoltaic low band gap copolymers

It has been shown recently, that the presence of alkyl side chains at the 3‐positions on the thiophene rings placed next to 2,1,3‐benzothiadiazole core in the backbone of several conjugated polymers results in severe steric hindrance and prevents efficient planarity of the thiophene‐2,1,3‐benzothiadiazole‐thiophene (TBzT) segment. Both properties have a strong influence on the optoelectronic properties of the polymer and need to be considered when the polymer is to be used for organic electronics applications. In this work, we modified a previously synthesized oligothiophene copolymer, consisting of two 3,4′‐dialkyl‐2,2′‐bithiophene units attached to a 2,1,3‐benzothiadiazole unit (TBzT segment) and a thieno[3,2‐b]thiophene unit, by optimizing the lateral alkyl side chains following a density functional theory investigation. It is demonstrated that eliminating the alkyl side chains from the 3‐positions of the TBzT segment and anchoring them onto the thieno[3,2‐b]thiophene, using an efficient synthesis of the 3,6‐dihexylthieno[3,2‐b]thiophene unit, allows us to reduce the energy band gap. In addition, the chemical modification leads to a better charge transport and to an enhanced photovoltaic efficiency of polymer/fullerene blends. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

荧光共轭聚合物在生物大分子检测中的应用*

共轭聚合物因其具有π-电子体系及共轭离域结构,一般都具有优异的发光性能,其发光强度和发射波长会随被检测化合物结构的不同而发生特异性响应,特别是在与被检测物相互作用过程中所产生电荷和能量能够沿共轭分子链进行有效传递,成倍放大这种作用,从而有效提高了检测灵敏度,这比相应的小分子化合物更具有优越性。目前共轭聚合物已被用于开发新型化学、生物传感器,尤其是在生物分子检测方面的应用得到迅速的发展。本文总结了近年来荧光共轭聚合物在生物传感方面的研究进展,主要讨论共轭聚合物在蛋白质、核酸及毒素检测中的应用。     

Conjugated Polymer Patterning through Photooxidative Backbone Cleavage

Photolithographic patterning of a xanthate precursor to poly(3,4‐diphenyl‐2,5‐thienylene vinylene) is described. Unlike xanthate precursors to poly(p‐phenylene vinylene), the thienylene vinylene analogue patterns as a positive tone resist. Characterization of irradiated films reveals photooxidative cleavage of the vinylene linker decreases the molecular weight of the polymer (increasing the solubility of the UV‐exposed areas). As a result of the mechanism, the developed pattern sees no UV light exposure, which is a significant advantage compared with negative‐tone‐conjugated polymer resists. Single micron resolution of a low‐bandgap polymer is achieved in an efficient and scalable process.

     

The suzuki–heck polymerization as a tool for the straightforward obtainment of poly(fluorenylene‐vinylene) sensitizers for dye‐sensitized solar cells

This article describes the synthesis and properties of the first poly(arylene‐vinylene)‐based sensitizers for application in dye‐sensitized solar cells (DSSC). The polymers were prepared by the Suzuki–Heck copolymerization of potassium vinyltrifluoroborate (PVTB) with a mixture of dibromoaryl comonomers designed to obtain macromolecules able to bind onto the photoelectrode by means of carboxyphenylene units. The copolymerization reactions were carried out in the presence of an excess of PVTB to lower the molecular weights of the polymers, which were obtained as soluble materials. The polymers poly[(9,9‐didodecyl‐2,7‐fluorenylene)‐vinylene‐co‐(carboxy‐2,5‐phenylene)‐vinylene] ( P1 ), poly[(9,9‐didodecyl‐2,7‐fluorenylene)‐vinylene‐co‐(carboxy‐2,5‐phenylene)‐vinylene‐co‐(4,7‐benzothiadiazolylene)‐vinylene] ( P2 ), and poly[(9,9‐didodecyl‐2,7‐fluorenylene)‐vinylene‐co‐(carboxy‐2,5‐phenylene)‐vinylene‐co‐2,5‐thienylene‐vinylene] ( P3 ) were used in DSSC devices, obtaining conversion efficiencies up to 0.88% ( P3 ). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

All-cis poly(p-phenylene vinylene)s with high molar masses and fast photoisomerization rates obtained through stereoretentive ring-opening metathesis polymerization of [2,2]paracyclophane dienes with various aryl substituents

Poly(p-phenylene vinylene)s (PPVs) are some of the most widely studied conjugated polymers in academia and industry, but most production methods lack precise control over molar masses and alkene stereochemistry. These critical parameters have a large influence on processability, polymer morphology, and optical properties. Herein, we report the stereoretentive ring-opening metathesis polymerization (ROMP) of [2.2]paracyclophane dienes bearing either a linear alkyl substituent or a branched alkoxy substituent to form all-cis PPVs with great solubility in organic solvents. The introduction of 2-ethylhexyloxy side-chains permits the preparation of PPV with uncharacteristically high molar masses (up to 108.8 kg/mol) for a polymerization with living characteristics. Exposure to UV light (365 nm) rapidly induces isomerization of all-cis alkenes leading to the formation of all-trans PPV. This study proposes an attractive strategy to synthesize soluble all-cis and all-trans PPVs with tunable, high molar masses through careful design of the ROMP monomer.     

Unravelling the detailed microstructure of a semiconducting (quasi‐metal) soluble polymer incorporating conjugated thienylene methine sequences

This article reports a thorough spectroscopic characterization and the complete microstructural unravelling of a novel soluble poly(thienylene methylene) recently obtained by a straightforward process based on the methanesulfonic acid‐catalyzed self‐condensation of 2‐acetoxymethyl‐3,4‐dimethylthiophene. These macromolecules were found to generate both in situ (in the acidic reaction medium) and ex situ (by the addition of appropriate dopants) conjugated sequences consisting of alternating aromatic‐ and quinoid‐like thiophene rings, that is, conjugated thienylene methine sequences. The effect of different types of dopants on the electronic features of these polymers was assessed by the extent of bathochromic shifts they induced in the macromolecule UV–vis spectra. Doped films obtained by solution casting were characterized by dielectric spectroscopy to evaluate their electronic conductivity. The observed low values of conductivity were explained on microscopic basis evidencing the presence of polymer branching. All the structures arising from side reactions responsible for branching were determined by an exhaustive NMR study, which led to the formulation of the corresponding mechanisms. Remarkably, all these polymers, irrespective of their specific structural features and molecular weights, retained complete solubility in common solvents. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Poly(thienylene‐vinylene‐thienylene) with cyano substituent: Synthesis and application in field‐effect transistor and polymer solar cell

A novel conjugated polymer, poly(thienylene‐vinylene‐thienylene) with cyano substituent ( CN‐PTVT ) was synthesized via Stille coupling for the application in air stable field‐effect transistor and polymer solar cell. The polymer was characterized by ¹H NMR, elemental analysis, UV‐vis absorption and photoluminescence spectroscopy, TGA, cyclic voltammetry and XRD analysis. CN‐PTVT exhibits a good thermal stability with 5% weight loss at 306 °C. The FET hole mobility of the polymer reached 5.9 × 10^?3 cm² V^?1 s^?1 with I_on/I_off ratio of 4.9 × 10⁴, which is one of the highest performance among the air‐stable amorphous polymers. The polymer solar cell based on CN‐PTVT as donor and PCBM as acceptor shows a relatively high open‐circuit voltage of 0.82 V and a power conversion efficiency of 0.3% under the illumination of AM1.5, 100 mW/cm². © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4028–4036, 2009     

Precision and control in polymer synthesis why it's important and some recent examples of how to do it

This paper discusses some of the reasons why precision and control in polymer synthesis is of importance. By way of illustration it describes in outline recent results from the authors' laboratories in three areas. Namely; the controlled syntheses of poly(arylene vinylene)s and the influence of cis/trans vinylene content on luminescence in such polymers; the living polymerisation of highly functionalised polymers in water and the regulation of the crystallisation of calcium carbonate from water by the resultant well-defined water soluble polymers; and a simple route to hyperbranched polymers and the influence of the structure and topology of the products on solution properties. In each case the influence of control of architecture on properties will be discussed.     

Poly(2,5‐thienylene vinylene) in Nano Shapes by CVD Polymerization

Poly(2,5‐thienylene vinylene) (PTV), an insoluble conjugated polymer, can be readily prepared in various shapes of different nanodimensions by the chemical vapor deposition polymerization of 2,5‐bis(chloromethyl)thiophene. The bischloromethyl monomer in the vapor phase is activated at 600 °C. The activated monomer vapor is deposited at room temperature on the surface of various substrates to prepare polymeric films, fibers, tubes etc., which are then thermally converted into PTV. PTV thin films can be carbonized thermally to produce graphitic compositions that contain sulfur atoms. Electrical conductivities of FeCl‐doped PTV and carbonized films are reported.

     

An enhanced host–guest electro‐optical polymer system using poly(norbornene‐dicarboximides) via ROMP

High glass transition temperature poly(N‐cyclohexyl‐5‐norbornene‐2,3‐dicarboximide)s (NDI)s prepared by ring opening metathesis polymerization yielded polymers with a narrow polydispersity and well‐controlled molecular weight materials when using the Grubbs first generation initiator. Polymers produced using the Grubbs second generation initiator could not be controlled easily. By initiator selection it was also possible to synthesize polymers with either 98 or 52% trans microstructures. These materials were employed as electro‐optic (EO) polymer hosts for high molecular hyperpolarizability (β) phenyl vinylene thiophene vinylene bridge chromophores. This chromophore was modified by the incorporation of a tert‐butyldiphenylsilane group. The addition was able to further increase its EO coefficient (r₃₃) to reach 93 pm/V in a trans rich poly(NDI) produced by the Grubbs first generation initiator, compared to a benchmark chromophore / polymer combination. We investigated in detail the relationship between polymer microstructure and their absolute molecular weight on forming the best host–guest with the high β chromophore. Our results indicate that by utilizing a very simple host–guest system a high r₃₃ can be realized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of new sulfone‐derivatized phenylenevinylene‐based conjugated copolymers with evolving energy levels and gaps

A new series of stable, processable, and chain end functionalizable sulfone‐derivatized phenylenevinylene‐based conjugated polymers (SFPVs) containing different donor type comonomers have been synthesized and characterized. The polymer main chains are consisted of a sulfone‐phenylene electron accepting unit coupled with an electron donating unit which is derived from one of the dialdehyde comonomers based on benzene, thiophene, and pyrrole (with or without alkoxy side chains). The optical energy gaps (E_g) of the new polymers (in solvent) are in a range of 1.9–2.3 eV, with the lowest energy gap obtained from the polymer containing pyrrole as the donor unit. By using a combination of strong donor unit (such as pyrrole) and a relatively weak but stable acceptor unit (sulfone‐substituted benzene), E_g of the conjugated polymers can be tailored to below 2 eV, while the vinylene bonds on the polymer main chain are still chemically stable to survive strong basic conditions as compared with the S,S‐dioxo‐thiophene‐based PTV polymers developed earlier for potential supra‐molecular block copolymer systems. The lowest energy gap P(Pyrrole‐SFPV) exhibited 10 times better photoelectric power conversion efficiency than P(TV‐SFPV). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Rodlike macromolecules through spatial overlapping of thiophene dendrons

Two novel dendritic macromonomers 7 and 8 functionalized with electroactive conjugated thiophene oligomers were synthesized by stepwise cross‐coupling reactions and the introduction of a vinyl group at the focal point. Both macromonomers were polymerized into dendronized polymers 9 and 10 by using a radical polymerization method. The photophysical and redox behaviors of dendronized polymers 9 and 10 are significantly different from those of the corresponding macromonomers. This difference may result from the spatial overlapping of thiophene dendrons through π–π interactions when the dendrons are connected to a polymer backbone. The dendronized polymers can organize into large‐area two‐dimensional sheets with a thickness of 4.8 nm. Polymer 9 , which has all‐dendritic thiophene side chains, exhibited enhanced conductivity by partial doping with iodine or nitrosonium tetrafluoroborate (NOBF₄). The novel amphiphilic dendronized polymer 15 was synthesized by the atom‐transfer radical polymerization of macromonomer 7 from a poly(ethylene glycol) (PEG) macroinitiator and was found to have a self‐organized structure in water.     

Synthesis and redox properties of racemic electroactive polymers containing axially chiral adamantyl segments

A method of introducing chirality directly into a polymer backbone has been developed that employs the dissymmetry of an adamantane derivative with axial chirality. This new chiral adamantane building block was readily functionalized with electroactive thiophene rings using palladium-catalyzed cross-coupling methodology. The two resulting electroactive monomers were electropolymerized to create racemic electroactive polymers containing phenyl-capped oligothiophene segments alternating with chiral adamantyl segments. Synthesis, electrochemistry, and spectroelectrochemistry studies are reported.     

Design and synthesis of pyromellitic diimide‐based donor–acceptor conjugated polymers for photovoltaic application

Three of conjugated polymers based on pyromellitic diimide (PMDI) as the acceptor unit and thienothiophene (TT) as the donor unit were successfully synthesized by Stille coupling. The effect of the side chain length and thiophene π‐bridge on the polymers' optical and electrochemical properties was investigated. Electrochemical characterization indicated that these polymers have deep highest occupied molecular orbital energy levels between ?5.7 and ?5.8 eV. Polymer solar cells were fabricated by using these PMDI‐based polymers as the donor and [6,6]‐phenyl‐C61‐butyric acid methyl ester as the acceptor. The polymer P1 whose PMDI unit was functionalized with 2‐ethylhexyl side chain shows the higher short‐circuit current (J_sc) and fill factor (FF) compared with that of P2 with a 2‐octyldodecyl side chain on the PMDI unit. The results also illustrate that the insertion of a thiophene π‐bridge between PMDI and TT (the polymer P3) leads to the broader absorption and better photovoltaic performance. The best performance was obtained from the cell based on the polymer P3 with a power conversion efficiency of 0.43% under the illumination of AM 1.5 G, 100 mW/cm². Copyright © 2014 John Wiley & Sons, Ltd.     

Structure-property correlation of light-emitting polymers containing alternating phenylene and thienylene/bithienylene repeating units

A number of series of fluorescent and conducting polymers containing alternating 3-functionalized thienylene/ bithienylene and phenylene/ pyridyl/ biphenylene units were synthesized from a number of central symmetric high oligomers and characterized using UV-Vis, photoluminescence, conductivity measurement, thermal analysis, electrochemistry, XRD and XPS. Structural variation of the polymers was realized by both side chain and polymer backbone modifications. Close structure-property correlation of the polymers was observed. This paper mainly reports the results of two families of them, those substituted by alkyl pendant chains and electro-withdrawing and donating groups.