Detection of paracetamol by capillary electrophoresis with chemiluminescence detection

Indirect detection of paracetamol was accomplished using a capillary electrophoresis-chemiluminescence (CE-CL) detection system, which was based on its inhibitory effect on a luminol-potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) CL reaction. Paracetamol migrated in the separation capillary, where it mixed with luminol included in the running buffer. The separation capillary outlet was inserted into the reaction capillary to reach the detection window. A four-way plexiglass joint held the separation capillary and the reaction capillary in place. K₃[Fe(CN)₆] solution was siphoned into a tee and flowed down to the detection window. CL was observed at the tip of the separation capillary outlet. The CL reaction of K₃[Fe(CN)₆] oxidized luminol was employed to provide the high and constant background. Since paracetamol inhibits the CL reaction, an inverted paracetamol peak can be detected, and the degree of CL suppression is proportional to the paracetamol concentration. Maximum CL signal was observed with an electrophoretic buffer of 30 mM sodium borate (pH 9.4) containing 0.5 mM luminol and an oxidizer solution of 0.8 mM K₃[Fe(CN)₆] in 100 mM NaOH solution. Under the optimal conditions, a linear range from 6.6 × 10⁻¹⁰ to 6.6 × 10⁻⁸ M (r = 0.9999), and a detection limit of 5.6 × 10⁻¹⁰ M (signal-to-noise ratio = 3) for paracetamol were achieved. The relative standard deviation (R.S.D.) of the peak area for 5.0 × 10⁻⁹ M of paracetamol (n = 11) was 2.9%. The applicability of the method for the analysis of pharmaceutical and biological samples was examined.     

Synthesis, structural characterisation of new oligomeric alkyl aluminium (2,2′-methylene-p-chloro-bisphenoxides) and application as catalysts in polymerisation reactions involving cyclohexene oxide

The synthesis, spectroscopic characterisation and X-ray structure determination of the first aluminium para-chloro-bisphenoxides [Al₂(mbpcp)₂(C₂H₅)₂(THF)₂] and [Al₃(mbpcp)₂(C₂H₅)₅] (mbpcp = 2,2′-methylenebis(4-chlorophenol) are reported. 2,2′-Methylenebis(4-chlorophenol) was reacted with triethyl aluminium to yield under liberation of ethane, aluminium para-chloro-2,2′-methylene-bisphenoxides with different molecular complexities: a dinuclear and a trinuclear specie, both displaying two bridging bisphenoxide ligands. The nature of the solvent (coordinating or not) influences the aggregation degree of the final product. The use of a coordinating solvent like THF yields a dimeric structure with a bisphenol:metal ratio of 1 to 1 which displays a trigonal-bipyramidal coordination geometry around the aluminium atoms whereas using an apolar, weak-coordinating solvent like diethyl ether yields a trinuclear species with a bisphenol:metal ratio of 2 to 3, displaying aluminium atoms with both tetrahedral and trigonal-bipyramidal coordination geometries. These compounds were tested in preliminary screening tests as catalysts of the homopolymerisation of cyclohexene oxide (CHO) and copolymerisation of CHO with carbon dioxide. Both aluminium bisphenoxides are highly active in the ring opening polymerisation of CHO (RT, reaction time <5 min, M_n ranging from 31 000 to 40 700 g/mol, polydispersities from 1.2 to 1.4). Both compound are also active in the copolymerisation of CHO with CO₂ although the carbonate amount remains low (75 bar, 90 °C, reaction time 8 h, M_n ranging from 6800 to 15 200 g/mol, polydispersities from 1.9 to 2.5).     

Preparation and characterization of graphite nano-platelet (GNP)/epoxy nano-composite: Mechanical,electrical and thermal properties

Epoxy based polymer nano-composite was prepared by dispersing graphite nano-platelets (GNPs) using two different techniques: three-roll mill (3RM) and sonication combined with high speed shear mixing (Soni_hsm). The influence of addition of GNPs on the electrical and thermal conductivity, fracture toughness and storage modulus of the nano-composite was investigated. The GNP/epoxy prepared by 3RM technique showed a maximum electrical conductivity of 1.8 × 10⁻⁰³ S/m for 1.0 wt% which is 3 orders of magnitude higher than those prepared by Soni_hsm. The percentage of increase in thermal conductivity was only 11% for 1.0 wt% and 14% for 2.0 wt% filler loading. Dynamic mechanical analysis results showed 16% increase in storage modulus for 0.5 wt%, although the Tg did not show any significant increase. Single edge notch bending (SENB) fracture toughens (K_IC) measurements were carried out for different weight percentage of the filler content. The toughening effect of GNP was most significant at 1.0 wt% loading, where a 43% increase in K_IC was observed. Among the two different dispersion techniques, 3RM process gives the optimum dispersion where both electrical and mechanical properties are better.     

Mechanisms involved in chemical vapor generation by aqueous tetrahydroborate(III) derivatization : Role of hexacyanoferrate(III) in plumbane generation

The role played by K₃Fe(CN)₆ (0.08 or 1.5 g l^− 1) in producing strong enhancement factors in the generation efficiency of plumbane in the reaction of NaBH₄ (10 or 40 g l^− 1) with Pb(II) (50 μg l^− 1) in 0.1 M HCl solution, was investigated by using continuous flow chemical vapor generation coupled with atomic fluorescence spectrometry (CF-CVG-AFS). Different mixing sequences and reaction times of reagents were tested using different chemifold setups. Part of CF-CVG-AFS experiments were performed using the on-line, delayed addition of Pb(II) to a K₃Fe(CN)₆ + NaBH₄ reaction mixture. Kinetic calculations estimating the concentration of K₃Fe(CN)₆ remaining in the K₃Fe(CN)₆ + NaBH₄ reaction mixture before it merged with Pb(II) solution were also performed. Batch experiments measuring the amount of hydrogen evolved (pressure of H₂ vs time) and pH variation during K₃Fe(CN)₆ + NaBH₄ + HCl reaction were performed in order to have a correct estimation of the concentration of K₃Fe(CN)₆ remaining in the reaction system. The comparison of CF-CVG-AFS experiments with kinetic calculations indicates that strong enhancement factors of plumbane generation can be obtained without any interaction of K₃Fe(CN)₆ with Pb(II). The key role of K₃Fe(CN)₆ is recognized in its reaction with NaBH₄ to give “special” borane complex intermediates, which are highly effective in the generation of plumbane from Pb(II).     

Electrospun nanofibers of polyferrocenylsilanes with different substituents at silicon

The strained silicon-bridged [1]ferrocenophane Fe(η-C₅H₄)₂SiBuMe was prepared via a facile chloride substitution reaction at the bridging atom of a readily available SiMeCl-bridged [1]ferrocenophane precursor. Thermal ring-opening polymerization of Fe(η-C₅H₄)₂SiBuMe and Fe(η-C₅H₄)₂SiMe₂ afforded polyferrocenyldimethylsilane (PFDMS) and polyferrocenylbutylmethylsilane (PFBMS), respectively. Polyferrocenylsilane nanofibers were fabricated by electrospinning polymer solutions in 90 wt% tetrahydrofuran and 10 wt% N,N-dimethylformamide at room temperature. The effect of processing parameters such as concentration of polyferrocenylsilanes solution, applied voltage, and working distance on the diameter and morphology of resulting nanofibers were investigated. Electron diffraction patterns from polymer nanofibers revealed that PFS fibers exhibit different orientation owing to variance of the side groups at silicon.     

Amperometric biosensor based on reductive H2O2 detection using pentacyanoferrate-bound polymer for creatinine determination

Pentacyanoferrate-bound poly(1-vinylimidazole) (PVI[Fe(CN)₅]) was selected as a mediator for amperometric creatinine determination based on the reductive H₂O₂ detection. Creatinine amidohydrolase (CNH), creatine amidohydrolase (CRH), sarcosine oxidase (SOD), peroxidase (POD), and PVI[Fe(CN)₅] were crosslinked with poly(ethylene glycol) diglycidyl ether (PEGDGE) on a glassy carbon (GC) electrode for a creatinine biosensor fabrication. Reduction current was monitored at −0.1 V in the presence of creatinine and O₂. It is revealed that PVI[Fe(CN)₅] is suitable as a mediator for a bioelectrocatalytic reaction of POD, since PVI[Fe(CN)₅] neither reacts with reactants nor works as an electron acceptor of SOD. The amounts of PVI[Fe(CN)₅], PEGDGE, and enzymes were optimized toward creatinine detection. Nafion as a protecting film successfully prevented the enzyme layer from interferences. The detection limit and linear range in creatinine determination were 12 μM and 12–500 μM (R² = 0.993), respectively, and the sensitivity was 11 mA cm⁻² M⁻¹, which is applicable for urine creatinine tests. The results of the creatinine determination for four urine samples measured with this proposed method were compared with Jaffe method, and a good correlation was obtained between the results.     

Efficient aldehyde olefination reactions catalyzed by an iron porphyrin complex in an ionic liquid

The commercially available complex Fe(TPP)Cl is an active and highly (E)-selective catalyst for the olefination of a variety of aldehydes in the presence of PPh₃ and diazoacetate in the ionic liquid (bmim)(PF₆). Dependent on the reactivity of the applied aldehyde, the reaction can be carried out at a reaction temperature of 50-80 °C. After 0.5-24 h quantitative olefin yields are reached with a broad variety of different aldehydes. Due to the application of an ionic liquid as reaction medium the products can be easily removed from the catalyst by a simple extraction and the catalyst is conveniently reusable without significant activity loss. Spectroscopic investigations indicate that the reaction mechanism includes the quantitative formation of a phosphorus ylide, which then reacts further in a Wittig reaction under formation of an olefin.     

Thermal stability and structure of electroactive polyaniline-fluoroboric acid-dodecylhydrogensulfate salt

Oxidation of aniline by emulsion polymerization pathway using benzoyl peroxide oxidant in the presence of fluoroboric acid and sodium lauryl sulfate surfactant leads to incorporation of both acid group as well as surfactant group onto the polyaniline chain as dopants i.e. formation of polyaniline-fluoroboric acid-dodecylhydrogensulfate salt (PANI-HBF₄-DHS). Amount of dopants such as fluoroboric acid (HBF₄), dodecylhydrogensulfate (DHS) and water present in the PANI-HBF₄-DHS was found out for the first time. Electrochemical activity and rheological stability of the polymer were determined. Thermal stability of PANI-HBF₄-DHS was determined by subjecting the polyaniline salt in macroscale at four different temperatures (100, 150, 200 and 250 °C). Structure, composition and thermal stability of polyaniline salt were determined by chemical analysis, conductivity, IR, UV/vis, XRD spectral measurements from the heat treated samples. Polyaniline salt contains 8.3 wt% water, 22.4 wt% HBF₄ and 15.4 wt% DHS at ambient temperature. Upon vacuum, polyaniline salt loses 4.7 wt% water and on heating the sample at 100 °C it loses the remaining 3.6 wt% water. On further heating polyaniline salt loses its dopants and at 250 °C it loses both the dopants almost completely. Polyaniline salt on heating undergoes cross-linking even at 100 °C and however, conductivity (3 × 10⁻² S/cm) of polyaniline salt was found to remain almost the same up to 150 °C.     

Determination of levodopa by capillary electrophoresis with chemiluminescence detection

A rapid and simple method using capillary electrophoresis (CE) with chemiluminescence (CL) detection was developed for the determination of levodopa. This method was based on enhance effect of levodopa on the CL reaction between luminol and potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) in alkaline aqueous solution. CL detection employed a lab-built reaction flow cell and a photon counter. The optimized conditions for the CL detection were 1.0 × 10⁻⁵ M luminol added to the CE running buffer and 5.0 × 10⁻⁵ M K₃[Fe(CN)₆] in 0.6 M NaOH solution introduced postcolumn. Under the optimal conditions, a linear range from 5.0 × 10⁻⁸ to 2.5 × 10⁻⁶ M (r = 9991), and a detection limit of 2.0 × 10⁻⁸ M (signal/noise = 3) for levodopa were achieved. The precision (R.S.D.) on peak area (at 5.0 × 10⁻⁷ M of levodopa, n = 11) was 4.1%. The applicability of the method for the analysis of pharmaceutical and human plasma samples was examined.     

Determination of aluminium in water samples by adsorptive cathodic stripping voltammetry in the presence of pyrogallol red and a quaternary ammonium salt

A fast, sensitive and selective method for the determination of aluminium based on the reaction of the metal with pyrogallol red (PR) in the presence of tetrabutylammonium tetrafluoroborate (TBATFB) to form an Al(PR)₃x9TBATFB complex which is adsorbed on the mercury electrode is presented. Under these conditions complexation of aluminium is rapid and no waiting period or heating of the sample is required. The reduction current of the accumulated complex is measured by scanning the potential in the cathodic direction. The variation of peak current with pH, adsorption time, adsorption potential, ligand and quaternary ammonium salt concentration, and some instrumental parameters, such as stirring rate in the accumulation stage, and step amplitude, pulse amplitude and step duration while obtaining the square wave voltamperograms were optimized. The best experimental parameters were pH 8.5, (NH₄Ac-NH₃ buffer), C_PR = 25 μmol L⁻¹, C_TBATFB over 75 μmol L⁻¹, t_ads = 60 s, and E_ads = −0.60 V versus Ag/AgCl. A linear response is observed over the 0.0-30.0 μg L⁻¹ concentration range, with a detection limit of 1.0 μg L⁻¹. Reproducibility for 9.0 μg L⁻¹ aluminium solution was 2.3% (n = 6). Synthetic sea water and sea water reference material CRM-SW were used for validation measurements. Aluminium in urine samples of a volunteer who ingested 800 mg of Al(OH)₃ was analyzed.     

Speciation analysis of aluminium and aluminium fluoride complexes by HPIC-UVVIS

The study presents a new analytical method for speciation analysis in fractionation of aluminium fluoride complexes and free Al³⁺ in soil samples. Aluminium speciation was studied in model solutions and soil extract samples by means of high performance ion chromatography (HPIC) with UV-VIS detection using post-column reaction with tiron for the separation and detection of aluminium fluoride complex and Al³⁺ forms during one analysis. The paper presents particular stages of the chromatographic process optimization involving selecting the appropriate eluent strength, type of elution or concentration and quantity of derivatization reagent. HPIC was performed on a bifunctional analytical column Dionex IonPac CS5A. The use of gradient elution and the eluents A: 1 M NH₄Cl and B: water acidified to pH of eluent phase, enabled full separation of fluoride aluminium forms as AlF₂⁺, AlF₃⁰, AlF₄⁻ (first signal), AlF²⁺ (second signal) and form Al³⁺ in a single analytical procedure. The proposed new method HPIC-UVVIS was applied successfully in the quantitative and qualitative analysis of soil samples.     

A simple and sensitive resonance scattering spectral method for determination of hydroxyl radical in Fenton system using rhodamine S and its application to screening the antioxidant

Based on resonance scattering (RS) effect of rhodamine dye association particles, a new resonance scattering method for the determination of hydroxyl free radical from Fenton reaction was developed. In HCl-NaAc buffer solution, the OH of Fenton reaction oxidized the excess I⁻ to I₃⁻. The I₃⁻ combined, respectively, with rhodamine B (RhB), butyl rhodamine B (b-RhB), rhodamine 6G (RhG) and rhodamine S (RhS) to form association particles that exhibit stronger resonance scattering effect at 420 nm and 610 nm. However, the RS peak at about 610 nm was interfered with its synchronous fluorescence peak at 580 nm for RhB, 580 nm for b-RhB, 560 nm for RhG and 560 nm for RhS, respectively. The concentration of H₂O₂ in the range of 0.648-21.6 μmol/L, 0.423-13.0 μmol/L, 0.216-13.0 μmol/L and 0.092-13.0 μmol/L was linear to its resonance scattering intensity at 420 nm. Its detection limit was 0.15 μmol/L, 0.10 μmol/L, 0.092 μmol/L and 0.044 μmol/L, H₂O₂, respectively. This RhS RS method was applied to selection of the antioxidant, with satisfactory results.     

Efficient generation of volatile species for cadmium analysis in seafood and rice samples by a modified chemical vapor generation system coupled with atomic fluorescence spectrometry

A vapor generation procedure to determine Cd by atomic fluorescence spectrometry (AFS) has been established. Volatile species of Cd are generated by following reaction of acidified sample containing Fe(II) and l-cysteine (Cys) with sodium tetrahydroborate (NaBH₄). The presence of 5 mg L⁻¹ Fe(II) and 0.05% m/v Cys improves the efficiency of Cd vapor generation substantially about four-fold compared with conventional thiourea and Co(II) system. Three experiments with different mixing sequences and reaction times are designed to study the reaction mechanism. The results document that the stability of Cd(II)–Cys complexes is better than Cys–THB complexes (THB means NaBH₄) while the Cys–THB complexes have more contribution to improve the Cd vapor generation efficiency than Cd(II)–Cys complexes. Meanwhile, the adding of Fe(II) can catalyze the Cd vapor generation. Under the optimized conditions, the detection limit of Cd is 0.012 μg L⁻¹; relative standard deviations vary between 0.8% and 5.5% for replicate measurements of the standard solution. In the presence of 0.01% DDTC, Cu(II), Pb(II) and Zn(II) have no significant influence up to 5 mg L⁻¹, 10 mg L⁻¹and 10 mg L⁻¹, respectively. The accuracy of the method is verified through analysis of the certificated reference materials and the proposed method has been applied in the determination of Cd in seafood and rice samples.     

Effect of silica nanoparticles on solid state polymerization of poly(ethylene terephthalate)

In the present study, the effect of silica nanoparticles, on the solid state polycondensation (SSP) kinetics of poly(ethylene terephthalate) (PET) is thoroughly investigated. At silica concentrations less than 1 wt% and reaction temperatures between 200 and 230 °C higher intrinsic viscosity (IV) values were measured, compared to neat PET at all reaction times. However, with 1 wt% of nanosilica (n-SiO₂), the IV increase of the nanocomposites was similar to that of neat PET and a further increase to 5 wt% n-SiO₂ resulted in significantly lower IV values. A simple kinetic model was also employed to predict the time evolution of IV, as well as the carboxyl and hydroxyl content during SSP. The kinetic parameters of the transesterification and esterification reactions were estimated at different temperatures with or without the addition of n-SiO₂. The activation energies of both reactions were determined together with the concentration of inactive end-groups. From the experimental measurements and the theoretical simulation results it was proved that n-SiO₂ in small amounts (less than 1 wt%) enhances both the esterification and transesterification reactions at all studied temperatures acting as a co-catalyst. However, as the amount of nanosilica increases a number of inactive hydroxyl groups were estimated corresponding to participation of these groups in side reactions with the nanosilica particles. These side reactions lead initially to branched PET chains and eventually (5 wt% n-SiO₂ concentration) to crosslinked structures.     

Synthesis and properties of titanomagnetite (Fe3−xTixO4) nanoparticles: A tunable solid-state Fe(II/III) redox system

Titanomagnetite (Fe_3−xTi_xO₄) nanoparticles were synthesized by room temperature aqueous precipitation, in which Ti(IV) replaces Fe(III) and is charge compensated by conversion of Fe(III) to Fe(II) in the unit cell. A comprehensive suite of tools was used to probe composition, structure, and magnetic properties down to site-occupancy level, emphasizing distribution and accessibility of Fe(II) as a function of x. Synthesis of nanoparticles in the range 0 ? x ? 0.6 was attempted; Ti, total Fe and Fe(II) content were verified by chemical analysis. TEM indicated homogeneous spherical 9-12 nm particles. μ-XRD and Mössbauer spectroscopy on anoxic aqueous suspensions verified the inverse spinel structure and Ti(IV) incorporation in the unit cell up to x ? 0.38, based on Fe(II)/Fe(III) ratio deduced from the unit cell edge and Mössbauer spectra. Nanoparticles with a higher value of x possessed a minor amorphous secondary Fe(II)/Ti(IV) phase. XANES/EXAFS indicated Ti(IV) incorporation in the octahedral sublattice (B-site) and proportional increases in Fe(II)/Fe(III) ratio. XA/XMCD indicated that increases arise from increasing B-site Fe(II), and that these charge-balancing equivalents segregate to those B-sites near particle surfaces. Dissolution studies showed that this segregation persists after release of Fe(II) into solution, in amounts systematically proportional to x and thus the Fe(II)/Fe(III) ratio. A mechanistic reaction model was developed entailing mobile B-site Fe(II) supplying a highly interactive surface phase that undergoes interfacial electron transfer with oxidants in solution, sustained by outward Fe(II) migration from particle interiors and concurrent inward migration of charge-balancing cationic vacancies in a ratio of 3:1.     

Osmium (VI) catalyzed chemoselective oxidation of allylic and benzylic alcohols

A mild and highly chemoselective approach to oxidation of allylic, electron rich/deficient benzylic, and heterocyclic alcohols employing catalytic quantities of K₂[OsO₂(OH)₄] (3 mol %) and chloramine-T (50 mol %) is described. The protocol offers short reaction times (25 min–2 h), controlled oxidation, and tolerance to a variety of substrates. A systematic mechanistic study based on the LC-ESI-MS/MS reveals the presence of imidotriooxoosmium species which further reacts with alcohol to give the oxidized product.     

Synthesis and characterization of MnPS3 for hydrogen sorption

Single phase MnPS₃ powder was prepared by solid state reaction between Mn, S and P carried out at 650 °C in evacuated silica tube. The structure, morphology and sorption characteristics of the prepared solid were investigated. The results revealed that the obtained MnPS₃ compound was capable of adsorbing 3.5 wt% hydrogen at −193 °C and a pressure of 30 bar. Little amount of hydrogen (0.07 wt%) was adsorbed at room temperature. The hydrogen adsorption/desorption cycles at various temperatures did not result in irreversible chemical structural changes of the MnPS₃ compound, but the microstructure after hydrogen cycling diminished and became finer.     

Determination of Zn, B, Fe, Mg, Ca, Na and Si in anisette samples by inductively coupled plasma atomic emission spectrometry

A comparative study of several digestion methods of anisette samples has been carried out. Two dry ashing (DA) treatments as well as four wet ashing (WA) procedures using different mixtures of acids were applied for the sample mineralisation before analysis. Once the anisette samples were mineralised, the contents of Zn, B, Fe, Mg, Ca, Na and Si were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES). Each method has been studied statistically and also attending to their feasibility. After performing the optimisation of the different treatments tested, it was concluded that one wet ashing method employing a HNO₃:H₂O₂ (10:1) mixture was the most suitable. This method was applied to the analysis of anisette samples. Na, Ca, Mg and Si were present in concentrations up to 215 mg l⁻¹ for Na, 11.6 for Mg, 6.2 for Ca and 5.1 for Si. Fe and B concentrations were not higher than 0.12 mg l⁻¹ and lower for Zn.     

The unusual reactions of indium(I) trifluoromethanesulfonate with some first row metallocenes and the structure of “indium(II) cyclopentadienide”

The soluble reagent indium(I) trifluoromethanesulfonate, InOTf, does not appear to react or interact with ferrocene (Cp₂Fe, Cp = C₅H₅) whereas cobaltocene reacts with InOTf to produce [Cp₂Co]⁺[OTf]⁻ and indium metal. Unexpectedly, the reaction of InOTf with manganocene results in the formation of the unprecedented salt [In(μ²,η⁵-Cp)In]⁺[Cp₃In(μ²,η¹-Cp)InCp₃]⁻: a form of “Cp₂In” that is characterized by X-ray crystallography. Similarly, the reaction of InOTf with [Cp₂Fe]⁺[PF₆]⁻ produces Cp₂Fe and “In₄OTf₆” in addition to other products. The unusual structural features and the formation of the new indium-containing products are rationalized.     

Analysis of intermetallic particles in aluminium by dissolution of the sample in butanol

Summary A new method for the quantitative analysis of intermetallic particles in aluminium has been developed. 0.3–5 g samples are dissolved in absolute 1-butanol. The content, the chemical composition, the structure, the shape and the size distribution of the undissolved particles have been determined by means of a series of methods including weight measurements, X-ray fluorescence, inductively coupled argon plasma spectrometry, Coulter Counter analysis and X-ray diffraction. The materials investigated were samples of 99.999 wt% aluminium, 99.5 wt% aluminium and aluminium — 0.4 wt% magnesium — 0.4 wt% silicon — 0.2 wt% iron alloy. Cast samples of the latter alloy contained mainly -AlFeSi and samples homogenized at 580°C - AlFeSi and 1-AlFe(Ni,Cu)Si. Al₁₃Fe₄-particles were dominant in the intermetallic phase present in the 99.5 wt% aluminium samples investigated. The results have been compared and found in agreement with emission spectrometric measurement of the alloys' chemical composition, transmission electron microscopy of the intermetallic phases of thin foils and light microscopy analysis of particles in polished samples.

---

Analyse intermetallischer Partikel in Aluminium durch Auflösung der Probe in Butanol

Zusammenfassung Zur Analyse wurden 0,3–5 g der Probe in absolutem 1-Butanol gelöst. Gehalt, chemische Zusammensetzung, Struktur, Form und Größenverteilung der ungelösten Partikel wurden mit Hilfe verschiedener Methoden bestimmt (Gewichtsmessungen, Röntgenfluorescenzanalyse, ICP, Coulter Counter-Analyse, Röntgendiffraktion). Die untersuchten Proben waren 99,999%iges Al, 99,5%iges Al sowie Al-Legierung mit 0,4% Mg, 0,4% Si und 0,2% Fe. Gußproben dieser Legierung enthielten hauptsächlich -AlFeSi, bei 580° C homogenisierte Proben -AlFeSi und 1-AlFe(Ni,Cu)Si. In der intermetallischen Phase der 99,5%- igen Al-Probe überwogen Al₁₃Fe₄-Partikel. Die erhaltenen Ergebnisse stimmen überein mit emmissionsspektrometrischen Bestimmungen der chemischen Zusammensetzung, mit transmissions-elektromikroskopischen Messungen der intermetallischen Phasen dünner Folien sowie der lichtmikroskopischen Analyse der Partikel in polierten Proben.