Bis(η-pentamethylcyclopentadienyl)-and(ηcyclopentadienyl) (η-pentamethylcyclopentadienyl)-platinium dications: Pt(IV) metallocenes

Reaction of [Pt₂(η⁵-C₅Me₅)₂(η-Br)₃]³⁺(Br⁻)₃ with C₅R₅H (R = H,Me) in the presence of AgBF₄ gives the first platinocenium dications, [Pt(η⁵-C₅Me₅)(η⁵-C₅R₅)]²⁺(BF₄⁻ )₂. On electrochemical reduction, [pt(η⁵-C₅Me₅)₂]²⁺ yields [Pt(η⁴-C₅Me₅H)(η²-C₅Me₅)]+ BF₄⁻. kw]Cyclopentadienyl; Metallocenes; Platinum; Electrochemistry     

P and C NMR investigation of the system tetracarbonyldi-μ-chlorodirhodium(I) — tertiary phosphine

¹³C and ³¹P{¹H} NMR data at low temperature prompted us to characterize cis-[Rh(CO)₂(PR₃)Cl] (3) (3a, PR₃ = PPh₃; 3b, PR₃ = PMe₂Ph), as surprisingly stable products of the reaction between [{Rh(CO)₂(μ-Cl)}₂] (1) and tertiary phosphines in toluene (P : Rh = 1). Every attempt to isolate solid 3a led to the cis- and trans- halide-bridged dimers [{Rh(CO)₂(μ-Cl)}₂] (5a) and 6a which are formed from 3a by slow decarbonylation, a process which is greatly accelerated by the evaporation of the solvent under vacuum.

The analogous reaction of 1 with dimethylphenylphosphine follows a similar pathway; in this case, however, low temperature NMR spectra allowed us to characterize the pentacoordinated dinuclear species [{Rh(CO)₂(μ-Cl)}₂] (2b) as the unstable intermediate of the bridge-splitting process.

The reaction of 3 with a second equivalent of phosphine (P : Rh = 2) leads, at room temperature, to the well known product trans-[Rh(CO)(PR₃)₂Cl] (8) accompanied by evolution of CO; however our data show that when the reaction is performed at 200 K, decarbonylation is prevented and spectroscopic evidence of trigonal bipyramidal pentacoordinate [Rh(CO)₂(PR₃)₂Cl] (7), stable only at low temperature, can be obtained.     

Versatile reactions of a para-bromophenylacetylide iron(II) derivative and X-ray structure of the fluoro analogue. Synthesis of new redox-active organoiron(II) synthons

The synthesis of the new (η²-dppe)(η⁵-C₅Me₅)Fe---CC---1,3-(C₆H₄X) (m-2a/2b; X=F/Br) and (η²-dppe)(η⁵-C₅Me₅)Fe---CC---1,4-(C₆H₄I) (2c) complexes, as well as the solid-state structure of the known (η²-dppe)(η⁵-C₅Me₅)Fe---CC---1,4-(C₆H₄F) (2a) complex are described. The catalytic coupling reactions of the bromo complexes with various alkynes were next investigated. Starting from the known (η²-dppe)(η⁵-C₅Me₅)Fe---CC---1,4-(C₆H₄Br) complex (2b), the synthesis of the (η²-dppe)(η⁵-C₅Me₅)Fe---CC---1,4-(C₆H₄)---CC---H complex (6d) and of the corresponding silyl-protected precursors (η²-dppe)(η⁵-C₅Me₅)Fe---CC---1,4-(C₆H₄)CC---SiR₃ (6b/6c; R=ⁱPr/Me) are reported. By use of lithium---bromine exchange reactions on 2b, the silyl- (7a; E=Si; R=Me) and tin- (7b–7d; E=Sn; R=Me, Bu, Ph) substituted analogues (η²-dppe)(η⁵-C₅Me₅)Fe---CC---1,4-(C₆H₄)ER₃ are also isolated. The spectroscopic and electrochemical characterisations of all these new Fe(II)/Fe(III) redox-active building blocks are presented and the electronic substituent parameters for the “(η²-dppe)(η⁵-C₅Me₅)Fe---CC” group are determined by means of ¹⁹F-NMR.     

双核茂金属催化剂的合成、表征与应用

使用桥连配体锂盐与MCl₄络合, 合成了4个不同结构的双核茂金属化合物[μ,μ-(CH₂)₃]{[C(H)·(η⁵-C₅H₄)(η⁵-C₁₃H₈)](MCl₂)}₂[M=Zr or Ti](4, 5)和[μ,μ-(CH₂)₃]{[C(H)(η⁵-C₅H₄)(η⁵-C₉H₆)]·(MCl₂)}₂[M=Zr or Ti](6, 7), 配体和化合物都经过核磁氢谱(¹H NMR)、 碳谱(¹³C NMR)、 红外光谱(IR)及元素分析等表征, 确认了化学结构. 以甲基铝氧烷(MAO)为助催化剂, 化合物4~7为催化剂催化丙烯聚合, 考察了聚合温度、 乙烯压力、 铝钛或铝锆比对催化剂活性及聚合物分子量的影响. 结果表明, 多亚甲基桥连双核茂金属是高活性乙烯和丙烯聚合催化剂, 乙烯聚合活性最高达到7.5× 10⁶ g PE/(mol Zr·h)(化合物6), 丙烯聚合活性达 10 × 10⁵ g sPP/(mol Zr·h)(化合物4). 所得间规聚丙烯(sPP)的间规度指数(SI, r) 达到90%. 在同样条件下, 双核化合物的催化活性、 聚合物分子量M_w(> 100000)以及分子量分布(MWD>2.5)均比相应的单核化合物高(M_w<70000, MWD≤2), 表明该体系中存在较强的核效应.     

An improved synthetic method and vibrational study of (pentamethylcyclopentadienyl) dicarbonylrhenium dihalides (η-C5Me5)Re(CO)2X2 (X = C1, Br and I)

An improved synthetic method has been found for the preparation of the pentamethylcyclopentadienyl rhenium dicarbonyldihalide complexes. From the reaction of (η⁵-C₅Me₅)Re(CO)₃ with Br₂ or I₂ in THF-H₂O a mixture of cis and trans isomers of (η⁵-C₅Me₅)Re(CO)₂X₂ X = Br and I is formed. On the other hand, the reaction of [(η⁵-C₅Me₅)Re(CO)₃C1][SbC1₆] in water gives the cis-(η⁵-C₅Me₅)Re(CO)₂C1₂ complex. The solid IR spectra of the dicarbonyldihalide complexes are recorded and an assignment of the normal modes in terms of local symmetry is suggested by comparison with those observed in analogous molecules. A normal coordinate analysis performed using a modified general valence force field and considering simplified models, confirms most of the experimental assignments. The set of valence force constants reflects the structure of the isomers under study.     

Some additional aspects of versatile starting compounds for cationic organoiron complexes: molecular structure of the aqua complex [(η-C5Me4Et)Fe(CO)2(OH2)]BF4 and solution behavior of the THF complex [(η---C5R5)Fe(CO)2(THF)]BF4

The structures of the versatile starting compounds for organoiron complexes, the cationic aqua complex [(η⁵-C₅Me₄Et)Fe(CO)₂(OH₂)]BF₄ (1b) and the halide complexes (η⁵-C₅Me₅)Fe(CO)₂-I (2a), (η⁵-C₅Me₄Et)Fe(CO)₂-I (2b) and (η⁵-C₅Me₄Et)Fe(CO)₂-Cl (3b), are characterized by X-ray crystallography. Complex 1b [Fe---O: 2.022(8) Å and 2.043(9) Å, two independent molecules] is the first structurally characterized example of organoiron aqua complexes. Details of the synthetic procedures for the above complexes and the labile cationic THF complexes [η⁵-C₅R₅)Fe(CO)₂(THF)]BF₄ (4) are disclosed, and the dissociation equilibrium of 4 is confirmed by means of variable temperature ¹H-NMR as well as saturation transfer experiment.     

Electrochemical behaviour of some polyoxo clusters

We describe the redox behaviour in non-aqueous solvents of some cyclopentadienyl(oxo)titanium derivatives. The derivative [Ti₄{η⁵-C₅H₄(SiMe₃)}₄(μ-O)₆] shows an electrochemically and chemically reversible le reduction process, followed by a multi-electron, chemically complicated reduction at a fairly cathodic potential. On the basis of the overall electrochemical features and the comparison with the redox behaviour of the quasi-planar compound [[Ti{η⁵-C₅H₄(SiMe₃)}Cl(μ-O)]₄] we propose an EECCEE mechanism for the first derivative, where the second electron-transfer induces a cascade of chemical reactions giving rise to irreversible cluster breakdown. The electrochemically induced fragmentation can be viewed as a retrosynthetic pathway. The heterometallic derivative [{Ti(η⁵-C₅H₄Me)₂(μ₂-MoO₄)₂}₂] shows two consecutive reduction processes; the first is chemically reversible, and the second quasi-reversible. The molybdate bridges apparently increase the stability of the electrogenerated anions. However none of these poly-oxo clusters can be considered as good models of electron ‘sinks’.     

Synthesis and crystal structure of the complex [MoW(OEt)(μ-CH2){μ-C(C6H4Me-4)C(Me)O}(η-C7H7)(η-C2B9H10Me)]

The complex [MoW(μ-CC₆H₄Me-4)(CO)₂(η⁷-C₇H₇)(η⁵-C₂B₉H₁₀Me)] reacts with diazomethane in Et₂O containing EtOH to afford the dimetal compound [MoW(OEt)(μ-CH₂){μ-C(C₆H₄Me-4)C(Me)O}(η⁷-C₇H₇)(η⁵-C₂B₉H₁₀Me)]. The structure of this product was established by X-ray diffraction. The Mo---W bond [2.778(4) Å] is bridged by a CH₂ group [μ-C---Mo 2.14(3), μ-C---W 2.02(3) Å] and by a C(C₆H₄Me-4)C(Me)O fragment [Mo---O 2.11(3), W---O 2.18(2), Mo---C(C₆H₄Me-4) 2.41(3), W---C(C₆H₄Me-4) 2.09(3), Mo---C(Me) 2.26(3) Å]. The molybdenum atom is η⁷-coordinated by the C₇H₇ ring and the tungsten atom is η⁵-coordinated by the open pentagonal face of the nido-icosahedral C₂B₉H₁₀Me cage. The tungsten atom also carries a terminally bound OEt group [W---O 1.88(3) Å]. The ¹H and ¹³C-{¹H} NMR data for the dimetal compound are reported and discussed.     

Group 3 and 4 metal alkyl and hydrido complexes containing a linked amido-cyclopentadienyl ligand: “constrained geometry” polymerization catalysts for nonpolar and polar monomers

In order to understand the nature of the putative cationic 12-electron species [M(η⁵:η¹-C₅R₄SiMe₂NR′)R″]⁺ of titanium catalysts supported by a linked amido-cyclopentadienyl ligand, several derivatives with different cyclopentadienyl C₅R₄ and amido substituents R′ were studied systematically. The use of tridentate variants (C₅R₄SiMe₂NCH₂CH₂X)²⁻ (C₅R₄=C₅Me₄, C₅H₄, C₅H₃^tBu; X=OMe, SMe, NMe₂) allowed the NMR spectroscopic observation of the titanium benzyl cations [Ti(η⁵:η¹-C₅Me₄SiMe₂NCH₂CH₂X)(CH₂Ph)]⁺. Isoelectronic neutral rare earth metal complexes [Ln(η⁵:η¹-C₅R₄SiMe₂NR′)R″] can be expected to be active for polymerization. To arrive at neutral 12-electron hydride and alkyl species of the rare earth metals, we employed a lanthanide tris(alkyl) complex [Ln(CH₂SiMe₃)₃(THF)₂] (Ln=Y, Lu, Yb, Er, Tb), which allows the facile synthesis of the linked amido-cyclopentadienyl complex [Ln(η⁵:η¹-C₅Me₄SiMe₂NCMe₃)(CH₂SiMe₃)(THF)]. Hydrogenolysis of the linked amido-cyclopentadienyl alkyl complex leads to the dimeric hydrido complex [Ln(η⁵:η¹-C₅Me₄SiMe₂NCMe₃)(THF)(μ-H)]₂. These complexes are single-site, single-component catalysts for the polymerization of ethylene and a variety of polar monomers such as acrylates and acrylonitrile. Nonpolar monomers such as -olefins and styrene, in contrast, give isolable mono-insertion products which allow detailed studies of the initiation process.     

Binuclear methyplatinum and phenylplatinum complexes with bis(dimethylphosphino)methane ligands

Reaction of cis-[Ptph₂(SMe₂)₂] with Me₂PCH₂PMe₂ (dmpm) gave cis-[PtPh₂(dmpm-P)₂] (1) or cis,cis-[Pt₂Ph₄(μ-dmpm)₂] (2) and reaction of 1 with [Pt₂Me₄(μ-SMe₂)₂] gave cis,cis-[Ph₂Pt(μ-dmpm)₂PtMe₂] (3). Reaction of 1 with trans-[PtClR(SMe₂)₂] gave cis,trans-[Ph₂Pt(μ-dmpm)₂PtClR], R = Me (5) or Ph (6), and in polar solvents, these isomerized to give [Ph₂Pt(μ-dmpm)₂PtR]⁺Cl⁻. When R = Me, further isomerization via the phenyl group transfer gave [PhMePt(μ-dmpm)₂PtPh]⁺Cl⁻. Oxidative addition of methyl iodide occurred reversibly at the cis-[PtMe₂P₂ unit of 3 to give cis,fac-[Ph₂Pt(μ-dmpm)₂PtIMe₃] but complex 2 failed to react with MeI. A comparison with similar known complexes of Ph₂PCH₂PPh₂ (dppm) is made and differences are attributed primarily to the lower steric hindrance of dmpm.     

Synthesis and structural characterization of sulfonates, phosphinates and carboxylates of organometallic Group 4 metal fluorides

Reaction of [Cp^*TiF₃] (Cp^* = (ν⁵-C₅Me₅)) with Me₃SiOSO₂- p-C₆H₄CH₃, Me₃SiOPOPh₂ and 1,2-(Me₃SiOCO)₂C₆H₄ yields the dinuclear complexes [{Cp^*TiF(μ-F)(μ-OSO₂-p-C₆H₄CH₄)}₂] (1), [{Cp^*TiF(μ-F)(μ-OPOPh₂)}₂] (2) and [{Cp^*TiF(μ-F)(μ-OCO-o-C₆H₄CO₂SiMe₃)}₂] (3). The molecular structures of 1 and 2 have been determined by single-crystal X-ray analysis. In complexes 1-3, the two titanium atoms are connected by bridging fluorine atoms as well as bridging sulfonate, phosphinate and carboxylate groups respectively. Each titanium atom is also bonded to a terminal fluorine atom. Reaction of [Cp₂^*ZrF₂] with 1,2-(Me₃SiOCO)₂C₆H₄ leads to the mononuclear pentacoordinate 18-electron species [Cp₂^*ZrF(μ-OCO-o-C₆H₄CO₂SiMe₃)] (4) and its structure was determined by X-ray crystallographic methods.     

Synthesis of metallocenes of zirconium, hafnium, manganese, iron, tin, lead and half-sandwich complexes of rhodium and iridium containing the ligands (η-C5R4CR′2PMe2), where R and R′ may be H or Me

The dimethylphosphino substituted cyclopentadienyl precursor compounds [M(C₅Me₄CH₂PMe₂)], where M=Li⁺ (1), Na⁺ (2), or K⁺ (3), and [Li(C₅H₄CR′₂PMe₂)], where R′₂=Me₂ (4), or (CH₂)₅ (5), [HC₅Me₄CH₂PMe₂H]X, where X⁻=Cl⁻ (6) or PF₆⁻ (7) and [HC₅Me₄CH₂PMe₂] (8), are described. They have been used to prepare new metallocene compounds, of which representative examples are [Fe(η-C₅R₄CR′₂PMe₂)₂], where R=Me, R′=H (9); R=H and R′₂=Me₂ (10), or (CH₂)₅ (11), [Fe(η-C₅H₄CMe₂PMe₃)₂]I₂ (12), [Fe{η-C₅Me₄CH₂P(O)Me₂}₂] (13), [Zr(η-C₅R₄CR′₂PMe₂)₂Cl₂], where R=H, R′=Me (14), or R=Me, R′=H (15), [Hf(η-C₅H₄CMe₂PMe₂)₂]Cl₂] (16), [Zr(η-C₅H₄CMe₂PMe₂)₂Me₂] (17), {[Zr(η-C₅Me₄CH₂PMe₂)₂]Cl}{(C₆F₅)₃BClB(C₆F₅)₃} (18), [Zr{(η-C₅Me₄CH₂PMe₂)₂Cl₂}PtI₂] (19), [Mn(η-C₅Me₄CH₂PMe₂)₂] (20), [Mn{(η-C₅Me₄CH₂PMe₂B(C₆F₅)₃}₂] (21), [Pb(η-C₅H₄CMe₂PMe₂)₂] (23), [Sn(η-C₅H₄CMe₂PMe₂)₂] (24), [Pb{η-C₅H₄CMe₂PMe₂B(C₆F₅)₃}₂] (25), [Pb(η-C₅H₄CMe₂PMe₂)₂PtI₂] (26), [Rh(η-C₅Me₄CH₂PMe₂)(C₂H₄)] 29, [M(η,κP-C₅Me₄CH₂PMe₂)I₂], where M=Rh (30), or Ir, (31).     

Preparation and characterization of ruthenium(II), rhodium(III) and iridium(III) complexes of isocyanide bearing the azo group

Reactions of [(η⁶-arene)RuCl₂]₂ (1) (η⁶-arene=p-cymene (1a), 1,3,5-Me₃C₆H₃ (1b), 1,2,3-Me₃C₆H₃ (1c) 1,2,3,4-Me₄C₆H₂(1d), 1,2,3,5-Me₄C₆H₂ (1e) and C₆Me₆ (1f)) or [Cp*MCl₂]₂ (M=Rh (2), Ir (3); Cp*=C₅Me₅) with 4-isocyanoazobenzene (RNC) and 4,4′-diisocyanoazobenzene (CN–R–NC) gave mononuclear and dinuclear complexes, [(η⁶-arene)Ru(CNC₆H₄N=NC₆H₅)Cl₂] (4a–f), [Cp*M(CNC₆H₄N=NC₆H₅)Cl₂] (5: M=Rh; 6: M=Ir)_, [{(η⁶-arene)RuCl₂}₂{μ-CNC₆H₄N=NC₆H₄NC}] (8a–f) and [(Cp*MCl₂)₂(μ-CNC₆H₄N=NC₆H₄NC)}] (9: M=Rh; 10: M=Ir)_, respectively. It was confirmed by X-ray analyses of 4a and 5 that these complexes have trans-forms for the ---N=N--- moieties. Reaction of [Cp*Rh(dppf)(MeCN)](PF₆)₂ (dppf=1,1′-bis (diphenylphosphino)ferrocene) with 4-isocyanoazobenzene gave [Cp*Rh(dppf)(CNC₆H₄N=NC₆H₅)](PF₆)₂ (7), confirmed by X-ray analysis. Complex 8b reacted with Ag(CF₃SO₃), giving a rectangular tetranuclear complex 11b, [{(η⁶-1,3,5-Me₃C₆H₃)Ru(μ-Cl}₄(μ-CNC₆H₄N=NC₆H₄NC)₂](CF₃SO₃)₄ bridged by four Cl atoms and two μ-diisocyanoazobenzene ligands. Photochemical reactions of the ruthenium complexes (4 and 8) led to the decomposition of the complexes, whereas those of 5, 7, 9 and 10 underwent a trans-to-cis isomerization. In the electrochemical reactions the reductive waves about −1.50 V for 4 and −1.44 V for 8 are due to the reduction of azo group, [---N=N---]→[---N=N---]²⁻. The irreversible oxidative waves at ca. 0.87 V for the 4 and at ca. 0.85 V for 8 came from the oxidation of Ru(II)→Ru(III).     

Interaction of half-sandwich alkylmolybdenum(III) complexes with B(C6F5)3. The X-ray structure of [CpMo(η-C4H6)(μ-Cl)(μ-CH2)(O)MoCp][CH3B(C6F5)3]

The reactions of the half-sandwich molybdenum(III) complexes CpMo(η⁴-C₄H₄R₂)(CH₃)₂, where Cp=η⁵-C₅H₅ and R=H or CH₃, with equimolar amounts of B(C₆F₅)₃ have been investigated in toluene. EPR monitoring shows the formation of an addition product which does not readily react with Lewis bases such as ethylene, pyridine, or PMe₃. The analysis of the EPR properties and the X-ray structure of a decomposition product obtained from dichloromethane, [CpMo(η⁴-C₄H₆)(μ-Cl)(μ-CH₂)(O)MoCp][CH₃B(C₆F₅)₃], indicate that the borane attack has occurred at the methyl position.     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

Synthesis and electrochemistry of organometallic ethanethiolato bridged complexes of ruthenium(IV)

Reaction of the ruthenium(IV) chloro-bridged dimer [{Ru(η³ : η³-C₁₀H₁₆)Cl(μ-Cl)}₂], 1, with ethanethiol (EtSH) in CH₂Cl₂ gives the bridged-cleaved adduct [Ru(η³ : η³-C₁₀H₁₆)Cl₂(SHEt)], 2. Stirring of two molar equivalents of 2 in methanol with one equivalent of 1 gives the binuclear, mixed chloro/thiolato bridged compound [{Ru(η³ : η³-C₁₀H₁₆)Cl} ₂(μ-SEt)], 3. The related doubly thiolato bridged complex [{Ru(η³ : η³-C₁₀H₁₀)Cl(μ-SEt)}₂], 4, is formed by treatment of 1 with an excess of EtSH, or by prolonged stirring of 2 alone in methanol. Compounds 2–4 have been studied by cyclic voitammetry. Compound 2 undergoes only irreversible oxidation, whereas in the case of both 3 and 4 the observation of significant return waves is consistent with a greater stability of the primary redox products.     

Reactions of metalloalkynes VII. Protonation of ruthenium ethyne-1,2-diyl complexes

The acid–base chemistry of some ruthenium ethyne-1,2-diyl complexes, [{Ru(CO)₂(η-C₅H₄R)}₂(μ₂-CC)] (R=H, Me) has been investigated. Initial protonation of [{Ru(CO)₂{η-C₅H₄R}}₂(μ₂-CC)] gave the unexpected complex cation, crystallised as the BF₄ salt, [{Ru(CO)₂(η-C₅H₄R}}₃(μ₃-CC)][BF₄] (R=Me structurally characterised). This synthesis proved to be unreliable but subsequent, careful protonation experiments gave excellent yields of the protonated ethyne-1,2-diyl complexes, [{Ru(CO)₂{η-C₅H₄R)}₂(μ₂-η¹:η²-CCH)](BF₄) (R=Me structurally characterised) which could be deprotonated in high yield to return the starting ethyne-1,2-diyl complexes.     

Diastereoselective synthesis of a resolved secondary arsine complex: asymmetric synthesis of (R-(−)589-ethylmethylphenylarsine

The reaction of [R-(R,R)]-(+)₅₈₉-[(η⁵-C₅H₅){1,2-C₆H₄(PMePh)₂}Fe(NCMe)]PF₆ with (±)-AsHMePh in boiling methanol yields crystalline [R-[(R)-(R,R)]-(+)_{589)-[(η⁵-C5H5){1,2-C6H4(PMePh)2}Fe(AsHMePH)}PF₆, optically pure, in ca. 90% yield, in a typical second-order asymmetric transformation. This complex contains the first resolved secondary arsine. Deprotonation of the secondary arsine complex with KOBu^t at −65°C gives the diastereomerically pure tertiary arsenido-iron complex [R-[(R),(R,R)]]-[((η⁵-C₅H₅){1,2-C₆H₄(PMePh)₂}FeAsMePh] · thf, from which optically pure [R-[(S),(R,R)]]-(+)₅₈₉-[(η⁵-C₅H₅){1,2-C₆H₄(PMePh)₂}Fe(AsEtMePh)PF₆ is obtained by reaction with iodoethane. Cyanide displaces (R)-(−)₅₈₉-ethylmethylphenylarsine from the iron complex, thereby effecting the asymmetric synthesis of a tertiary arsine, chiral at arsenic, from (±)-methylphenylarsine and an optically active transition metal auxiliary.     

Synthesis and characterization of hydroxo, pyrazolato and carboxylato derivatives of the PdR(PPh3)moiety (R = C6F5 or C6Cl5)

The hydroxo-complexes [{PdR(PPh₃)(μ-OH)}₂] (R = C₆F₅ or C₆Cl₅) have been obtained by reaction of the corresponding [{PdR(PPh₃)(μ-Cl)}2] complexes with NBu₄OH in acetone. In this solvent, the reaction of the hydroxo-bridged complexes with pyrazole (Hpz) and 3,5-dimethylpyrazole (Hdmpz) in 1:2 molar ratio leads to the formation of the new complexes [{Pd(C₅F₅)(PPh₃)(μ-azolate)}2] and [{Pd(C₆Cl₅)(PPh₃)}₂(μ-OH)(μ-azolate)] (azolate = pz or dmpz). The reaction of the bis(μ-hydroxo) complexes with Hpz and Hdmpz in acetone in 1:1 molar ratio has also been studied, and the resulting product depends on the organic radical (C₆F₅ or C₆Cl₅) as well as the azolate (pz or dmpz). The identity of the isomer obtained has been established in every case by NMR (¹H, ¹⁹F and ³¹P) spectroscopy. The reaction of the bis(μ-hydroxo) complexes with oxalic (H₂Ox) and acetic (HOAc) acids yields the binucle ar complexes [{PdR(PPh₃)}2(μ-Ox)] (R = C₆F₅ or C₆Cl₅) and [{Pd(C₆F₅)(PPh₃)(μ-OAc)}2], respectively. [{Pd(C₆F₅)(PPh₃)(μ-OH)}₂] reacts with PPh₃ in acetone in 1:2 ratio giving the mononuclear complex trans-[Pd(C₆F₅) (OH)(PPh₃)₂], whereas the pentachlorophenylhydroxo complex does not react with PPh₃, even under forcing conditions.     

Stabile Bis(η-alkin)MCl2-komplexe; Darstellung und reaktivität

The synthesis and reactivity of {(η⁵-C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂} MCl₂ (M = Fe: 3a; M = Co: 3b; M = Ni: 3c) is described. The complexes 3 are accessible by the reaction of (η⁵-C₅H₄SiMe₃) ₂Ti(CSiMe₃)₂ (1) with equimolar amounts of MCl₂ (2) (M = Fe, Co, Ni). 3a reacts with the organic chelat ligands 2,2′-dipyridyl (dipy) (4a) or 1,10-phenanthroline (phen) (4b) in THF at 25°C to afford in quantitative yields (η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂ (1) and [Fe(dipy)₂]Cl₂ (5a) or [Fe(phen)₂]Cl₂ (5b). 1/n[Cu^IHal]_n (6) or 1/n[Ag^IHal]_n (7) (Hal = Cl, Br) react with {(η⁵ -C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂}FeCl₂ (3a), by replacement of the FeCl₂ building block in 3a, to yield the compounds {(η⁵-C₅H₄SiMe₃)₂Ti(C CSiMe₃)₂}Cu^IHal (8) or {(η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂}Ag^IHal (9) (Hal = Cl, Br), respectively. In 8 and 9 each of the two Me₃SiCC-units is η²-coordinated to monomeric Cu^I Hal or Ag^IHal moieties. Compounds 8 and 9 can also be synthesized by the reaction of (η⁵-C₅H₄SiMe₃)₂ Ti(CSiMe₃)₂ (1) with 1/n[Cu^IHal]_n (6) or 1/n [Ag^IHal]_n (7) in excellent yields. All new compounds have been characterized by analytical and spectroscopic data (IR, ¹H-NMR, MS). The magnetic moments of compounds 3 were measured.