Fluorometric determination of proteins using the yttrium(III)-sodium lauryl sulfate-rutin-protein system

It is found that rutin can react with yttrium(III) (Y³⁺), and emits fluorescence of rutin. The intensity is greatly enhanced by proteins in the presence of sodium lauryl sulfate (SLS). Based on this, a new fluorimetric method of determination of proteins is developed. Under optimum conditions, the enhanced intensity of fluorescence is in proportion to the concentration of proteins in the range of 5.0×10⁻⁹-1.0×10⁻⁵ g/mL for bovine serum albumin (BSA), 3.0×10⁻⁸-1.0×10⁻⁵ g/mL for human serum albumin (HSA) and 1.0×10⁻⁷-2.0×10⁻⁵ g/mL for egg albumin (EA). Their detection limits (S/N=3) are 1.6×10⁻⁹, 9.8×10⁻⁹ and 2.1×10⁻⁸ g/mL, respectively. The interaction mechanism is also studied.     

Determination of albumins by its quenching effect on the fluorescence of Tb-oxolinic acid complex in presence of sodium dodecyl sulphate

It is found that the fluorescence intensity of Tb³⁺-oxolinic acid (OA) complex can be greatly quenched by albumins in sodium dodecyl sulphate (SLS). Under optimum conditions, the quenched fluorescence intensity is in proportion to the concentration of proteins in the range of 5.0×10⁻⁸-1.0×10⁻⁵ g ml⁻¹ for bovine serum albumin (BSA), 1.0×10⁻⁷-1.0×10⁻⁵ g ml⁻¹ for human serum albumin (HSA) and 4.0×10⁻⁷-1.0×10⁻⁵ g ml⁻¹ for egg albumin (EA). Their detection limits (S/N=3) are 2.1×10⁻⁸, 2.5×10⁻⁸ and 5.0×10⁻⁸ g ml⁻¹, respectively. In addition, the interaction mechanism is also investigated.     

Fluorometric determination of proteins using the terbium (III)-2-thenoyltrifluoroacetone-sodium dodecyl benzene sulfonate-protein system

It is found that in hexamethylene tetramine (HMTA)-HCl buffer of pH=8.00, proteins can enhance the fluorescence of terbium (III) (Tb³⁺)-2-thenoyltrifluoroacetone (TTA)-sodium dodecyl benzene sulfonate (SDBS) system. Based on this, a sensitive method for the determination of proteins is proposed. The experiments indicate that under the optimum conditions, the enhanced fluorescence intensity is in proportion to the concentration of proteins in the range of 4.0×10⁻⁹-7.5×10⁻⁶ g/mL for bovine serum albumin (BSA), 5.0×10⁻⁹-1.5×10⁻⁵ g/mL for human serum albumin (HSA), 1.0×10⁻⁸-7.5×10⁻⁶ g/mL for egg albumin (EA). Their detection limits (S/N=3) are 0.5, 0.8 and 2.0 ng/mL, respectively. The interaction mechanism is also studied.     

The synthesis and the magnetic properties of Gd-doped FexCo1−x/CoyFe3−yO4 micro-octahedrons composites

Gd³⁺-substituted micro-octahedron composites (Fe_xCo_1−x/Co_yGd_zFe_3−y−zO₄) in which the Fe-Co alloy has either a bcc or fcc structure and the oxide is a spinel phase were fabricated by the hydrothermal method. The X-ray diffraction (XRD) patterns indicate that the as-synthesized Gd³⁺-substituted micro-octahedron composites are well crystallized. Scanning electron microscopy (SEM) images show that the final product consists of larger numbers of micro-octahedrons with the size ranging from 1.3 to 5 μm, and the size of products are increased with increasing the concentration of KOH. The effect of the Co²⁺/Fe²⁺ ratio (0?Co²⁺/Fe²⁺?1) and substitution Fe³⁺ ions by Gd³⁺ ions on structure, magnetic properties of the micro-octahedrons composites were investigated, and a possible growth mechanism is suggested to explain the formation of micro-octahedrons composites. The magnetic properties of the structure show the maximal saturation magnetization (107 emu/g) and the maximal coercivity (1192 Oe) detected by a vibrating sample magnetometer.     

Investigations on Fe doped polyvinyl alcohol films with and without gamma (γ)-irradiation

This paper deals with the preparation of pure and ferric chloride (FeCl₃) doped polyvinyl alcohol (PVA) films by solution casting method. Optical and electrical properties were systematically investigated. We have found the decrease in optical band gap energy of PVA films on doping FeCl₃. The optical band gap energy values in the present work are found to be 3.10 eV for pure PVA, 2 eV for PVA:Fe³⁺ (5 mol%), 1.91 eV for PVA:Fe³⁺(15 mol%) and 1.8 eV for PVA:Fe³⁺(25 mol%). Direct current electrical conductivity (σ) of pure, FeCl₃ doped PVA films in the temperature range 70-127 °C has been studied. At 387 K dc electrical conductivity of pure PVA film is 5.5795 μ Ω⁻¹ cm⁻¹, PVA:Fe³⁺ (5 mol%) film is 10.0936 μ Ω⁻¹ cm⁻¹ and γ-Irradiated PVA:Fe³⁺ (5 mol%) film for 900 CGY/min is 22.1950 μ Ω⁻¹ cm⁻¹. The result reveals the enhancement of the electrical conductivity with γ-irradiation. FT-IR study signifies the intermolecular hydrogen bonding between Fe³⁺ ions of FeCl₃ with OH group of PVA.     

Fluorescence quenching of 6-methoxyquinoline: an indicator for sensing chloride ion in aqueous media

The quenching of fluorescence intensity and decay time of protonated form of 6-methoxyquinoline (6MQ⁺) with chloride ion (Cl⁻) in aqueous solution at ambient temperatures have been investigated. The quenching follows linear Stern-Volmer relation. The values of Stern-Volmer quenching constant/quenching efficiency (K_sv) and quenching rate constant (K_q) for the Cl⁻ ion are close to 75 M⁻¹ and 3.21×10⁹ M⁻¹ S⁻¹, respectively. The quenching is found to be collisional or dynamical in nature. The study reveals that the system can be used as a sensor for the detection of chloride ion.     

Theoretical studies of the optical and EPR spectra for Fe ion in the MF3:Fe (M=Al, Ga) systems

By analyzing the EPR spectra of Fe³⁺ ion in the fluorinde glasses, the local lattice structures around impurity Fe³⁺ ion in MF₃:Fe³⁺ (M=Al, Ga) systems have been studied by means of diagonalizing the complete energy matrices of the electron-electron repulsion, the ligand-field and the spin-orbit coupling for a d⁵ configuration ion in a trigonal ligand-field. Both the second-order and fourth-order EPR parameters D and (a−F) are taken simultaneously in the structural investigation. The results indicate that the local lattice structure around octahedral Fe³⁺ center has an expansion distortion for Fe³⁺ in MF₃:Fe³⁺ (M=Al, Ga). The expansion distortion may be ascribed to the fact that the radius of Fe³⁺ ion is larger than that of Al³⁺ ion and Ga³⁺ ion, and the Fe³⁺ ion will push the fluoride ligands upwards and downwards, respectively. The local lattice structure parameters R=1.927 A, θ=55.538° for Fe³⁺ in AlF₃:Fe³⁺ and R=1.931 A, θ=56.09° for Fe³⁺ in GaF₃:Fe³⁺ are determined, respectively, and the EPR spectra of the MF₃:Fe³⁺ (M=Al, Ga) systems are satisfactorily explained.     

Synchronous fluorescence determination of ciprofloxacin in the pharmaceutical formulation and human serum based on the perturbed luminescence of rare-earth ions

A simple, rapid and sensitive synchronous fluorescence method was developed for the determination of ciprofloxacin (CPFX) in the pharmaceutical formulation and human serum. The results show that when Y³⁺ is added into the CPFX solution, the characteristic fluorescence of Y³⁺ is not emitted whereas the fluorescence intensity of CPFX is significantly enhanced. The synchronous fluorescence technology is employed in this method to directly determine trace amount of CPFX in human serum. A linear relationship between the fluorescence intensity and the CPFX concentration is obtained in the range of 1.0×10⁻⁹ ∼5.0×10⁻⁶ mol L⁻¹. The limit of detection (LOD) of this method attains as low as 2.0×10⁻¹⁰ mol L⁻¹ (S/N=3). The selectivity of this method is also very good. Common metal ions, rare-earth ions and some pharmaceuticals, which are usually used together with CPFX in the clinic, do not interfere with the determination of CPFX under general conditions.     

Ionoluminescence and photoluminescence studies of Ag ion irradiated kyanite

Ionoluminescence (IL) of kyanite single crystals bombarded with 100 MeV swift Ag⁸⁺ ions with fluences in the range 1.87-7.5×10¹¹ ions/cm² has been studied. A pair of sharp IL peaks at ∼689 and 706 nm along with broad emission in the region 710-800 nm are recorded in both crystalline and pelletized samples. Similar results are recorded in Photoluminescence (PL) of pelletized kyanite bombarded with same ions and energy with fluences in the range 1×10¹¹-5×10¹³ ions/cm² with an excitation of 442 nm laser beam. The characteristic pair of sharp emission peaks at 689 and 706 nm in both IL and PL is attributed to luminescence centers activated by Fe²⁺ and Fe³⁺ ions. The reduction in IL and PL bands intensity with increase of ion fluence might be attributed to degradation of Si-O (2ν₃) bonds, present on the surface of the sample.     

A Novel Quinazolinone Derivative as Fluorescence Quenching Off-On Sensor for High Selectivity of Fe3+

A novel quinazolinone compound containing quinazoline-fused moiety has been synthesized as fluorescence Off-On sensor QQ. The probe exhibited highly selective and sensitive recognition toward trivalent ferric ion (Fe³⁺) over other metal ions in HEPES buffer solution (10 mM, pH?=?7.0, DMF-H₂O, 9:1, v/v). The significant quenching in the fluorescence spectral could be served as a selective fluorescence Off-On sensor. The titration study indicated the formation of 1:1 complex between QQ and Fe³⁺.     

Turn-off Fluorescence Chemosensor for Iron with Bis(2-aminoethyl)-2-(9-fluorenyl)malonamide Functionlized SBA-15

An bis(2-aminoethyl)-2-(9-fluorenyl)malonamide as fluorophore ligand was immobilized onto mesoporous silica type SBA-15 via post synthesis grafting. The obtained material was characterized by small and wide angle X-ray diffraction, N₂ adsorption–desorption, Fourier transform infrared spectroscopy, Raman spectroscopy and thermogravimetric analysis that indicate the successful immobilization of the ligand on the surface of mesoporous silica. The sensing ability of the obtained material was studied by addition of the cations Fe³⁺, Mg²⁺, Cr³⁺, Co²⁺, Ni²⁺, Cu²⁺, Hg²⁺ and Zn²⁺ to water suspensions of the assayed solid. Of all the cations tested addition of Fe³⁺ ion to a suspension of this material resulted in the largest decrease in the fluorescence intensity. Turn-off photoluminescence of this material was remarkably observed for iron ions in comparing of the other cations. A good linearity between the fluorescence intensity of this material and the concentration of Fe³⁺ ion is constructed, which enables it as a fluorescence chemosensor for detecting the Fe³⁺ ion with a suitable detection limit of 1.35?×?10^?5. It can be introduced as a novel fluorescent sensor in aqueous solution for a lot of practical applications in chemical, environmental and biological systems.     

Theoretical study of trigonal Fe center in SrCl2:Fesystem

The presence of Fe³⁺ centers with trigonal symmetry in chlorinated SrCl₂ crystal is an interesting phenomenon. By diagonalizing the complete energy matrices for a d⁵ configuration ion in a trigonal ligand-field and simulating the EPR low-symmetry parameters D and (a−F) simultaneously, the local lattice structure around trigonal Fe³⁺ center in SrCl₂:Fe³⁺ system has been studied. It is shown that Nistor et al.'s viewpoint about replacement is right, but the Cl⁻ ion along 〈111〉 axis around the Fe³⁺ center is replaced not by an O²⁻ ion but by some negative ion with effective charge to be less than that of Cl⁻ ion. Our results indicate that when the ratio of the effective charge of the negative ion to that of Cl⁻ ion is 0.8 as well as the distortion angle of the upper triangle is Δθ=−4.682°, the EPR parameters D and (a−F) can be explained satisfactorily.     

Theoretical study of local crystal structure in KZnF3:Fe system

An analysis of the relationship between the EPR trigonal-field parameters and the local crystal structure of KZnF₃:Fe³⁺system is presented by diagonalizing the complete energy matrices for a d⁵ configuration ion in a trigonal crystal field. We propose a two-layer-ligand model, in which the ligands consist of six nearest-neighbor F⁻ ions in the first layer and eight next nearest-neighbor K⁺ ions in the second layer. The calculation indicates that the local structure distortion of KZnF₃:Fe³⁺system is due to the displacement of a K⁺ ion along C₃ axis towards the Fe³⁺ ion, which leads to the shift of the F⁻ ions away from C₃ axis. By simulating the EPR low-symmetry parameters D and (a−F), the distorted angles between the Fe³⁺-F⁻ bonds and C₃ axis are determined, Δθ₁=2.58°, Δθ₂=−1.4° at room temperature (300 K) and Δθ₁=2.84°, Δθ₂=−1.4° at low temperature (77 K). Those results are in good agreement with the experimental findings Δθ₁=2.8±0.3°and Δθ₂=−1.1±0.3°.     

Ultrasensitive and selective spectrofluorimetric determination of Hg(II) using a dimercaptothiadiazole fluorophore

The present work describes the ultrasensitive and selective spectrofluorimetric determination of Hg(II) using 2,5-dimercaptothiadiazole (DMT) as a fluorophore. DMT shows an emission maximum at 435 nm while exciting at 330 nm. The colorless solution of DMT changes into a highly emittive yellow color immediately after the addition of 0.5 μM Hg(II) and nearly 245-fold increase in emission intensity at 435 nm was observed. These changes were ascribed to the complex formation between Hg(II) and DMT. Based on the fluorescence enhancement, the concentration of Hg(II) was determined. The binding constant value (K_A=1.8620×10⁴ mol⁻¹ L) suggests that there is a strong binding force between Hg(II) and DMT. The fluorescence quantum yield of DMT-Hg(II) complex was found to be 4-fold higher than that of DMT, indicating that the DMT-Hg(II) complex was highly emittive than the DMT. Interestingly, the emission intensity was increased even in the presence of 0.1 pM Hg(II). The fluorophore showed an extreme selectivity towards 100 nM Hg(II) in the presence of 50,000-fold higher concentrations of Na⁺, K⁺, Ca²⁺, Mg²⁺, Fe²⁺, Fe³⁺, Cd²⁺, Cr³⁺, Mn²⁺, Zn²⁺, Co²⁺, Ni²⁺, Cl⁻, SO₄²⁻, NO₃⁻ ions and 1000-, 500- and 200-fold higher concentrations of Cu²⁺, Pb²⁺ and Ag⁺ ions, respectively, as interferences. The lowest detection of 18 pg L⁻¹ Hg(II) (LOD=3S/m) was achieved for the first time using DMT by fluorimetry. The proposed method was successfully utilized for the determination of Hg(II) in tap water, river water and industrial waste water samples.     

A Highly Fluorescent Pyrene-Based Sensor for Selective Detection Of Fe3+ Ion in Aqueous Medium: Computational Investigations

In this work, we introduce a highly selective and sensitive fluorescent sensor based on pyrene derivative for Fe(III) ion sensing in DMSO/water media. 2-(pyrene-2-yl)-1-(pyrene-2-ylmethyl)-1H-benzo[d]imidazole (PEBD) receptor was synthesized via simple condensation reaction and confirmed by spectroscopic techniques. The receptor exhibits fluorescence quenching in the presence of Fe(III) ions at 440 nm. ESI–MS and Job’s method were used to confirm the 1:1 molar binding ratio of the receptor PEBD to Fe(III) ions. Using the Benesi-Hildebrand equation the binding constant value was determined as 8.485?×?10³ M^?1. Furthermore, the limit of detection (LOD, 3σ/K) value was found to be 1.81 µM in DMSO/water (95/5, v/v) media. According to the Environmental Protection Agency (EPA) of the United States, it is lower than the acceptable value of Fe³⁺ in drinking water (0.3 mg/L). The presence of 14 other metal ions such Co²⁺, Cr³⁺, Cu²⁺, Fe²⁺, Hg²⁺, Pb²⁺, K⁺, Ni²⁺, Mg²⁺, Cd²⁺, Ca²⁺, Mn²⁺, Al³⁺, and Zn²⁺ did not interfere with the detection of Fe(III) ions. The fluorescence life-time of the receptor PEBD with and without Fe³⁺ ion was found to be 1.097?×?10^?9 s and 0.9202?×?10^?9 s respectively. Similarly, the quantum yield of the receptor PEBD with Fe³⁺ and without Fe³⁺ ion was calculated, and found as 0.05 and 0.25 respectively. Computational studies of the receptor PEBD were carried out with density functional theory (DFT) using B3LYP/ 6-311G (d, p), LANL2DZ level of theory.

Graphical Abstract

     

Electromagnetic and microwave absorbing properties of Co2Z-type hexaferrites doped with La

Z-type ferrites doped with La³⁺, Ba_3−xLa_xCo₂Fe₂₄O₄₁ (x=0.00-0.30), were prepared by sol-gel method. The effect of the substitution La³⁺ rare-earth ions for Ba²⁺ ions on the microstructure, complex permeability, permittivity and microwave absorption of the samples was investigated. The results show that the major phase of the ferrites changed to Z-phase when sintering temperature was 1250 °C for 5 h. With the increase of the substitution ratio of La³⁺ ions from 0.0 to 0.3, the lattice parameters a and c increased gradually, which resulted in the change of the particle shape and size. The data of magnetism showed that the addition of La³⁺ ions make the ferrite a better soft magnetic material due to increase of magnetization (σ_s) and decrease of coercivity (H_c). The La³⁺ ions doped in the ferrite not only improved complex permeability and complex permittivity, but also microwave absorbency.     

Luminescence of La3F3[Si3O9]:Ce

The luminescence properties of Ce³⁺ in La₃F₃[Si₃O₉] are reported. Excitation and emission bands corresponding to 4f¹→5d¹ transitions of Ce³⁺ were identified. The center of gravity of the 5d states lies at remarkable high energy (43.2×10³ cm⁻¹) for Ce³⁺ in a silicate compound. This high value is attributed to the combined oxygen/fluoride coordination of the Ce³⁺ ion. Emission from the lowest 4f5d level to the ²F_5/2 and ²F_7/2 levels was found at 32.4×10³ and 30.4×10³ cm⁻¹. These results are compared with literature data on silicates and fluorides. From the values found for Ce³⁺, predictions are made for the positions of the 4f5d bands of Pr³⁺ and Er³⁺ in La₃F₃[Si₃O₉]. For both ions, it is concluded that in this host lattice emission is expected from high lying 4fⁿ energy levels.     

Fluorescence enhancement of oxide fluoride glass co-doped with TbF3 and SmF3

The fluorescence property of xTbF₃-BaF₂-AlF₃-GeO₂+ySmF₃ (x=0.01-40 mol%, y=0-5 wt%) glasses were investigated. The enhancement of Sm³⁺ fluorescence was recognized in the presence of Tb³⁺. Increasing Tb³⁺ content, the emission color changed from green to orange. When the intensity of fluorescence at 540 nm originated from Tb³⁺ is compared with that at 600 nm originated from Sm³⁺, the information about the concentration quenching of Tb³⁺ and Sm³⁺ was obtained. From these results, rare earth ions were dispersed identically in the glasses. After heating to 673 K or cooling to 77 K, the emission color of 20TbF₃-20BaF₂-10AlF₃-50GeO₂/mol%+0.05 wt% SmF₃ glass was reversibly changed from orange to green. In addition, while the emission from 10TbF₃-20BaF₂-10AlF₃-60GeO₂+0.01 wt% SmF₃ glass was green, its crystallized sample, prepared by annealing at 1073 K, exhibited an orange emission due to Sm³⁺ at room temperature.     

Enhancement of room temperature ferromagnetism of Fe-doped ZnO epitaxial thin films with Al co-doping

Epitaxial films of ZnO doped with magnetic ion Fe and, in some cases, with 1% Al show clear evidence of room temperature ferromagnetic ordering. The Al doped optimized samples with carrier concentration n_c∼8.0×10²⁰ cm⁻³ show about 3 times enhanced saturation magnetization (0.58 μ_B/Fe²⁺) than the one with n_c∼3.0×10²⁰ cm⁻³ (0.18 μ_B/Fe²⁺). A clear correlation between the magnetization per transition metal ion and the ratio of the number of carriers to the number of donors have been found as is expected for carrier-induced room temperature ferromagnetism. The transport mechanism of the electrons in all the DMS films at low temperature range has been identified with the Efros's variable range hopping due to the electron-electron Coulomb interaction.     

Selective extraction of palladium(II) using hydrazone ligand: A novel fluorescent sensor

The acyclic tridentate blue luminescent ligand (λ_ex=300 nm, λ_em=415 nm) quinoline-2-carboxaldehyde 2-pyridylhydrazone, HL, 1, was recognized as a new fluorescent chemosensor for Pd²⁺. In alkaline methanol complete fluorescent quenching was observed in the presence of 2 equivalents of Pd²⁺ that was further reflected in the solid phase fluorescence microscopic study.Ligand formed 1:1 complexes with Ni²⁺, Cu²⁺, Zn²⁺, Pd²⁺ and 1:2 complexes with Co²⁺, Fe²⁺ as obtained from Job's plot of continuous variation. The binding constants of different metal complexes (Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Pd²⁺) were estimated by fluorescence titrations. The ligand can selectively extract significant amount of Pd²⁺ from the aqueous mixture of metal ions, and the extraction efficiency was increased from 80% to 95% with increase in the molar ratio of HL, 1, to Pd²⁺ from 1 to 3. No significant interference was observed up to 2-fold excess addition of Cu²⁺ and Zn²⁺ and 100-fold excess addition of Co²⁺, Fe²⁺ and Ni²⁺over the Pd²⁺ ion concentration (1.0×10⁻³ M).