Interaction of a rigid punch and a circular plate with a fixed side and a stress-free face

The axisymmetric contact problem of a rigid punch indentation into an elastic circular plate with a fixed side and a stress-free face is considered. The problem is solved by a method developed for finite bodies which is based on the properties of a biorthogonal system of vector functions. The problem is reduced to a Volterra integral equation (IE) of the first kind for the contract pressure function and to a system of two Volterra IE of the first kind for functions describing the derivative of the displacement of the plate upper surface outside the punch and the normal (or tangential) stress on the plate lower fixed surface. The last two functions are sought as the sum of a trigonometric series and a power-law function with a root singularity. The obtained ill-conditioned systems of linear algebraic equations are regularized by introducing small parameters and have a stable solution. A method for solving the Volterra IE is given. The contact pressure functions, the normal and tangential stresses on the plate fixed surface, and the dimensionless indentation force are found. Several examples of a plane punch computation are given.     

Interaction of a cylinder with a free surface and a jet

The problem of the asymmetric flow around a cylinder of a nonviscous jet is considered and, in particular, of flow with one free boundary. The problem of the choice of circulation is posed, based on a generalization of the Zhukovskii-Chaplygin postulate. Several possibilities are considered and the principle of the minimum of the maximum velocity on a contour is proposed, which qualitatively and quantitatively truly reflects certain aspects of the interaction of the cylinder with the flow.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 50–58, September–October, 1977.     

Reflection of a strong shock wave from a sphere and a cylinder

We examine the flow on the axis in the vicinity of the stagnation point for reflection of a strong plane shock wave (with uniform parameters behind the wave) from a sphere and a circular cylinder whose generators are parallel to the incident wave front.The small parameter method [1, 2] is used to obtain, in closed form, relations which define the time variation of the velocity profile, pressure, enthalpy, and reflected shock wave standoff.As the time t , these relations reduce to the known formulas [3, 4] which define the steady flow on the axis for the flow behind the incident shock wave about a body, if account is taken of the leading terms containing the small parameter.The solution is extended to the case in which account for equilibrium dissociation and ionization is necessary.Comparison of the results with measurement [5] of the reflected shock wave distance from a sphere, as a function of time, shows satisfactory agreement.     

Density and temperature ahead of a cylinder with a thermally insulated wall and a cooled wall in a rarefied hypersonic system

Results are presented of a measurement of density and temperature on the stagnation line of a cylinder in cross flow at Mach number M_∞=5, Knudsen number Kn_∞=0.06?0.33, and with temperature factor varying from 1 to 0.11. The effect of degree of rarefaction and the temperature factor on the structure of the perturbed region ahead of the cylinder has been investigated.     

Torsion problems for a cylinder with a rectangular hole and a rectangular cylinder with a crack

Using the method of singular integral equation and the crack-cutting technique, the rigorous solutions are obtained for a cylinder with a rectangular hole and a rectangular cylinder with a crack, which exactly satisfy the boundary conditions and the conditions at the corner points. After that the torsional rigidities and the stress intensity factors at the crack tip are determined. Next, for the doubly connected circular cylinder with a rectangular hole the expressions for the singular stresses around the concave corner points are derived and the generalized stress intensity factors are then defined. Since the crack-cutting technique is used in this paper, the solution of the matching rectangular cylinder is also obtained and its numerical results coincide with those in references. Thus the method proposed here is verified. The project supported by National Natural Science Foundation of China     

Liquid flow in a gap between a cylinder and a wall in motion

The results of an experimental investigation and calculations of the location of the minimum pressure point are presented for the case, when a cylindrical body moves along a wall in the presence of a small gap. The pressure on the cylindrical body surface is measured in the confusor and diffuser regions. It is shown that with decrease in the gap the minimum pressure point is displaced toward the minimum gap line, with increase in the pressure drop. An increase in the velocity of the motion at a constant gap leads only to a pressure increase in the diffuser region, while the location of the minimum pressure point remains the same. It is established that an increase in the inner cylinder radius moves the minimum pressure location away from the minimum gap line. The formation of two return flow regions in the confusor and diffuser regions near the cylindrical surface is detected. It is shown that the return flow in the pressure drop region reaches the stage of incipient cavitation bubbles. The results obtained can be useful in lubrication theory, as well as in medicine and biology.     

Interactions between a rectangular cylinder and a free-surface flow

The salient features of the interaction between a free-surface flow and a cylinder of rectangular cross-section are investigated and discussed. Laboratory-scale experiments are performed in a water channel under various flow conditions and elevations of the cylinder above the channel floor. The flow field is characterized on the basis of time-averaged and fluctuating local velocity measurements. Dynamic loadings on the cylinder are measured by two water-insulated dynamometers placed inside the cylinder structure. Starting from frequency and spectral analyses of the force signals, insights on the relationship between force dominant frequencies and the Strouhal number of the vortex shedding phenomenon are provided. Experimental results highlight the strong influence of the asymmetric configuration imposed by the two different boundary conditions (free surface and channel floor) on (i) the mean force coefficients and (ii) the vortex shedding frequencies. We provide an analysis of the nature of the dependence of average force coefficients on relevant dimensionless groups, i.e., the Reynolds number, normalized flow depth and cylinder submersion.     

Spherical Vortex Structures with a Core and a Shell

In this paper we construct and investigate the vortex structure consisting of a spherical vortex (vortex core) inside a spherical vortex layer (shell). A partial case of this structure is a spherical vortex with uniformly helical motion of the fluid within the core and the shell. The strengths of the helical flows in the core and the shell are generally different. The case of identical strengths is analyzed in detail. The streamline pattern is presented. The vortex velocity limit at which the vortex does not collapse is found. This proves to be less by a factor 1.7 than the analogous quantity for a vortex without a shell and 4 times lower than the maximum velocity of the Hill vortex.     

Heat exchange between a gas bubble and a liquid

The nonlinear problem of thermal and dynamic interaction between a single gas bubble and surrounding liquid is considered. This problem is met in studies of gas-liquid mixture flows, in particular, in Shockwave propagation in such media. A numerical solution is presented for various modes of bubble surface radial motion. The modes correspond to bubble behavior directly beyond a shock-wave front, where the latter enters the bubble screen, and to the behavior of a bubble located in the depths of the bubble curtain, where the wave becomes diffuse. Analytic solutions of the linearized problem of thermal conductivity for free and constrained small harmonic oscillations of a gas bubble in a liquid were obtained in [1, 2]. Cooling of a hot gas bubble was considered in [3], that study, however, contains inaccuracies. In particular, it was assumed in the solution that the gas density in the bubble was homogeneous. The equation for heat flux in dimensionless variables was written inaccurately. However, in the examples considered in [3] these inaccuracies do not lead to significant errors in the numerical results.     

On oscillations of a beam with a small rigidity and a time-varying mass

In this paper, we show that oscillations of an Euler–Bernoulli beam with a small rigidity and with a time varying mass can lead to a resonance, which involves a large number of modes. This effect can induce a stability loss. The corresponding equations are complicated, in particular, in the nonlinear case with an external excitation. To analyze these equations, a new asymptotic method (which has a variational nature and is based on energy estimates) was suggested and applied. This method allows us to investigate the stability problem and to find how the system stability depends on the beam parameters. The number of modes involved in a resonance can be computed with the help of suggested explicit formulas. The effect of modal interactions for a problem with an external excitation term \(\rho _0 u_\mathrm{t} - \rho _1 u_\mathrm{t}^3\) in the equation describing the beam displacement, where \(\rho _0\) and \(\rho _1\) are some positive coefficients, was studied. This type of cubic nonlinearity can model a wind force acting on the beam.     

Three-dimensional elastostatics of a layer and a layered medium

This paper is concerned with the determination of the distribution of stresses and displacements in an infinite three-dimensional, linear, elastic, isotropic, homogeneous layer subjected to concentrated body forces acting upon an arbitrary internal point.In §2 and §3 the governing partial differential field equations are reduced to a system or ordinary differential equations by the use of the two-dimensional Fourier transform, taken with respect to the two in-plane geometric variables (§4). Analytical expressions for the stresses and displacements are then obtained for the particular case of concentrated body forces, represented as Dirac delta functions (§5).The results are subsequently utilized to formulate the multilayered medium problem by means of transfer matrices. In §8 the typical problem of a non-adhesive layered medium is undertaken.     

Flow between a porous rotating disk and a plane

It is shown that when a viscous incompressible fluid is sucked through a stationary porous disk spontaneous rotation of the fluid sets in at a certain Reynolds number. This is consistent with the results of a specially designed experiment. Another unusual result is the existence of multicell regimes, corresponding to suction, when the force acting on the porous, rapidly rotating disk is a lift force and, moreover, anomalously large. Charts of the possible steady-state flow regimes, stable and unstable, have been constructed. In the case of fairly intense suction and rotation a stable self-oscillating regime is observed. In the limit of vanishingly small viscosity unusual boundary layer properties associated with suction are noted.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 53–65, November–December, 1989.     

Mixing of a supersonic stream and a transverse jet injected through a circular hole in a plate

An experimental investigation is conducted of the propagation and mixing of a transverse sonic jet injected into a supersonic gas stream through a circular hole in a plate. The picture of the interaction at the initial section of the injected jet is examined in the majority of papers devoted to this question [1–3]. The aim of this paper is to investigate the mixing of the injected jet with the free stream, and to establish criteria governing the jet insertion and mixing processes.     

On the interaction between a dislocation and a crack in a material with a nonlinear stress-strain law

The problem of the interaction of a crack and a dislocation in a medium with a nonlinear stress-strain law is considered for the case of a semi-infinite crack in a displacement loaded strip under longitudinal shear deformation. A power law stress-strain relation is considered and the dislocation is assumed positioned so that the net effect of its interaction with the crack is to produce a zero stress intensity factor when combined with the effect of the applied displacements. Thus the Atkinson-Kay superdislocation model of a relaxed crack tip is extended to the situation where the material satisfies a power-law stress-strain relationship.     

Calculation and Analysis of the Power Supply of a Railgun From a Magnetohydrodynamic Generator and a Transformer

The power supply of an electromagnetic accelerator of solids (railgun) from a source of electromagnetic energy with a magnetohydrodynamic generator and a transformer with superconducting windings is calculated and analyzed. The laws and equations for electrical circuits are used, which are solved analytically and numerically. It is shown that a transformer with superconducting windings can be used to accumulate electromagnetic energy from a magnetohydrodynamic generator and to power a railgun in burst mode operation.     

Motion and heat and mass transfer in a disperse admixture in turbulent nonisothermal jets of a gas and a low-temperature plasma

The motion and heat and mass transfer of particles of a disperse admixture in nonisothermal jets of a gas and a low-temperature plasma are simulated with allowance for the migration mechanism of particle motion actuated by the turbophoresis force and the influence of turbulent fluctuations of the jet flow velocity on heat and mass transfer of the particle. The temperature distribution inside the particle at each time step is found by solving the equation of unsteady heat conduction. The laws of scattering of the admixture and the laws of melting and evaporation of an individual particle are studied, depending on the injection velocity and on the method of particle insertion into the jet flow. The calculated results are compared with data obtained with ignored influence of turbulent fluctuations on the motion and heat and mass transfer of the disperse phase. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 3, pp. 95–108, May–June, 2008.     

Combined radiation and natural convection in a rectangular cavity with a transparent wall and containing a non-participating fluid

This paper describes a numerical method for the study of combined natural convection and radiation in a rectangular, two-dimensional cavity containing a non-participating (i.e. transparent) fluid. One wall of the cavity is isothermal, being heated either by solar radiation or independently. The opposite wall is partially transparent, permitting radiation exchanges between the cavity and its surroundings and/or the Sun; that wall also exchanges heat by convection from its external surface to the surroundings. The other two walls are adiabatic: convection and radiation there are balanced, so that there is no heat transfer through those walls. The equations of motion and energy are solved by finite difference methods. Coupled to these equations are the radiative flux boundary conditions which are used to determine the temperature distribution along the non-isothermal walls. A two-band radiation model has been employed. Results are presented for a square cavity with a vertical hot wall at 150 °C, the ambient at 20 °C and 10⁴ ? Ra ? 3 × 10⁵, in the absence of direct insolation. The effects on the flow and heat transfer in the cavity of radiation and external convection have been examined. More extensive results will be presented in subsequent papers.