Electroreduction of Nitroaromatic Compounds at Electrochemically Reduced Graphene Oxide Supported Bimetallic Ag@Pd Nanorods Modified Electrodes

The design and fabrication of nanostructured electrode with high activity at low cost are crucial elements in studying the toxicity of environmental pollutants. Here, we develop a combined step of generating Electrochemically Reduced Graphene Oxide (ERGO) nanosheets on the surface of the glassy carbon electrode where an effective seed mediated growth followed by a galvanic exchange process were introduced for the direct growth of Ag core @Pd shell nanorods (Ag@Pd NRDs). The resulting electrode possesses a large surface area, interconnected porous networks, uniform distribution of bimetallic Ag@Pd NRDs with extremely thin size of Pd generation and good electrical conductivity, which are highly desirable for the electrocatalytic reduction of nitroaromatic compounds (NACs). In the fabrication step, the shell like Cu at the bimetallic NRDs acts as a sacrificial template for forming a thin layer of Pd at Ag NRDs surface by redox replacement reaction. Thus, the resultant Ag@Pd NRDs on ERGO modified electrode was profoundly tested for the electrochemical sensing of NACs with high sensitivity, selectivity and a very low detection limit of 1.8×10^?11 M. Differential Pulse Voltammetry (DPV) was used to study the linear range of 4‐nitroaniline (4‐NA) between 1.0×10^?9 M and 1.2×10^?8 M. The modified electrode exhibits better reproducibility and long term stability. In addition, the modified electrode out performed well in the real sample analysis containing NACs in the presence of different interfering cations and anions.     

Synthesis of highly-branched Au@AgPd core/shell nanoflowers for in situ SERS monitoring of catalytic reactions

Alloy and small size nanostructures are favorable to catalytical performance, but not to surface-enhanced Raman spectroscopy (SERS) applications. Integrating SERS and catalytic activity into the nanocrystals with both alloy and small size structures is of great interest in fabrication of SERS platform to in situ monitor catalytical reaction. Herein, we report a facile method to synthesize Au@AgPd trimetallic nanoflowers (Au@AgPd NFs) with both SERS and catalytic activities, through simultaneous selective growth of Ag and Pd on Au core to form highly-branched alloy shell. These nanocrystals have the properties of small sizes, defects abundance, and highly-dispersed alloy shell which offer superior catalytic activity, while the merits of monodisperse, excellent stability, and highly-branched shell and core/alloy-shell structure promise the enhanced SERS activity. We further studied their growth mechanisms, and found that the ratio of Ag to Pd, sizes of Au core, and surfactant cetyltrimethylammonium bromide together determine this special structure. Using this as-synthesized nanocrystals, a monolayer bifunctional platform with both SERS and catalytical activity was fabricated through self-assembly at air/water interface, and applied to in situ SERS monitoring the reaction process of Pd-catalyzed hydrogenation of 4-nitrothiophenol to 4-aminothiophenol.     

Facet‐Dependent and Light‐Assisted Efficient Hydrogen Evolution from Ammonia Borane Using Gold–Palladium Core–Shell Nanocatalysts

Au–Pd core–shell nanocrystals with tetrahexahedral (THH), cubic, and octahedral shapes and comparable sizes were synthesized. Similar‐sized Au and Pd cubes and octahedra were also prepared. These nanocrystals were used for the hydrogen‐evolution reaction (HER) from ammonia borane. Light irradiation can enhance the reaction rate for all the catalysts. In particular, Au–Pd THH exposing {730} facets showed the highest turnover frequency for hydrogen evolution under light with 3‐fold rate enhancement benefiting from lattice strain, modified surface electronic state, and a broader range of light absorption. Finite‐difference time‐domain (FDTD) simulations show a stronger electric field enhancement on Au–Pd core–shell THH than those on other Pd‐containing nanocrystals. Light‐assisted nitro reduction by ammonia borane on Au–Pd THH was also demonstrated. Au–Pd tetrahexahedra supported on activated carbon can act as a superior recyclable plasmonic photocatalyst for hydrogen evolution.     

Platinum‐Decorated Au Porous Nanotubes as Highly Efficient Catalysts for Formic Acid Electro‐Oxidation

Au porous nanotubes (PNTs) were synthesized by a templating technique that involves the chemical synthesis of Ag nanowire precursors, electroless surface modification with Au, and selective etching. A subsequent galvanic replacement reaction between [PtCl₆]^2? and residual Ag generates Pt‐decorated Au porous nanotubes (Pt/Au PNTs), which represents a new type of self‐sustained high surface area electrocatalysts with ultra‐low Pt loading. Structural characterizations with scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X‐ray powder diffraction (XRD) reveal a novel nanoarchitecture with multimodal open porosity and excellent structural continuity and integrity. Cyclic voltammetry (CV) demonstrates that these Pt/Au PNTs possess very high electrocatalytic activity toward formic acid oxidation with enhanced tolerance to CO poisoning.     

One‐Pot Synthesis and Electrocatalytic Properties of Pd@Pt Core‐Shell Nanocrystals with Tailored Morphologies

Pd@Pt core‐shell nanocrystals consisting of well‐defined Pd nanocube cores and dendritic Pt shells were prepared by a new facile aqueous one‐pot synthetic method. The prepared Pd@Pt nanocrystals exhibited efficient catalytic activity and stability toward methanol electrooxidation, and their catalytic function was highly dependent on their Pt shell thickness due to the different synergism between Pt and Pd.     

Polyoxometalate‐Mediated One‐Pot Synthesis of Pd Nanocrystals with Controlled Morphologies for Efficient Chemical and Electrochemical Catalysis

Polyoxometalates (POMs), as inorganic ligands, can endow metal nanocrystals (NCs) with unique reactivities on account of their characteristic redox properties. In the present work, we present a facile POM‐mediated one‐pot aqueous synthesis method for the production of single‐crystalline Pd NCs with controlled shapes and sizes. The POMs could function as both reducing and stabilizing agents in the formation of NCs, and thus gave a fine control over the nucleation and growth kinetics of NCs. The prepared POM‐stabilized Pd NCs exhibited excellent catalytic activity and stability for electrocatalytic (formic acid oxidation) and catalytic (Suzuki coupling) reactions compared to Pd NCs prepared without the POMs. This shows that the POMs play a pivotal role in determining the catalytic performance, as well as the growth, of NCs. We envision that the present approach can offer a convenient way to develop efficient NC‐based catalyst systems.     

Surface‐Imprinted,Thermosensitive, Core‐Shell Nanosphere for Molecular Recognition

Summary: The D ‐glucose imprinted core‐shell nanosphere with an average size of ≈60 to 80 nm showed a significant preference for the binding of D ‐glucose than the non‐imprinted core‐shell nanosphere. Depending on temperature, the binding site in the shell with N‐isopropylacrylamide oligomer underwent a significant change in binding affinity. In addition, the D ‐glucose imprinted core‐shell nanosphere showed a two times higher affinity for D ‐glucose than L ‐glucose, suggesting chiral recognition of the binding site. The core‐shell nanosphere reported here is a good biomimetic model system with a well‐defined morphology, high surface area, and variable binding affinity through a change in temperature.

D ‐glucose imprinted core‐shell nanospheres showed excellent binding over the non‐imprinted core‐shell nanosphere.     

Preparation of FePd‐RGO Bimetallic Composites with High Catalytic Activity for Formic Acid Electro‐Oxidation

FePd‐RGO composites through the growth of uniformly dispersed iron‐palladium bimetallic nanoparticles (NPs) on reduced graphene oxide (RGO) nanosheets were prepared by a two‐step method. The firstly formed Fe is used as the seed for the subsequent Pd growth. The formation of Fe NPs on RGO in the first step is performed by an in‐situ reduction reaction with the reducer ethylene glycol under oil bath at 180°C. NPs in the as‐prepared FePd‐RGO have an average particle size of 6.5 nm, and Pd is added to one side of Fe which leads to the formation of Fe‐Pd bimetallic interfaces. As compared with the commercial Pd black at the same loading, the composites have higher electro‐catalytic activity, better electrochemical stability and higher resistance to CO poisoning for formic acid electro‐oxidation.     

Observed Dramatically Improved Catalysis of Ag Shell on Au/Ag Core‐shell Nanorods is Due to Silver Impurities Released During Etching Process

Core/shell bimetallic nanoparticles are highly popular in electrocatalysis; it is argued that the core metal enhances the catalytic properties of the shell. We have investigated the electrocatalytic properties of Au/Ag core‐shell nanorods (Au/Ag NRs) where Ag shell was thinned by aging in the presence of cetyltrimethylammonium bromide. We observed excellent electrocatalysis toward hydrogen peroxide electroreduction upon decreasing the Ag shell thickness, which would, at first, appear to imply a strong synergistic effect of the Au core with the Ag shell for electrocatalysis. We show, however, that this electrocatalysis is not caused by particular Au/Ag core/shell structures but rather by the presence of residual silver impurities in the form of Ag nanoparticles (Ag NPs) formed during the preparation of the thin‐layer silver shell/gold core nanorods.     

Synthesis and Characterization of Dendrimer‐Encapsulated Bimetallic Core‐Shell PdPt Nanoparticles

Using a successive method, PAMAM dendrimer‐encapsulated bimetallic PdPt nanoparticles have been successfully prepared with core‐shell structures (Pd@Pt DENs). Evidenced by UV‐vis spectra, high resolution transmission electron microscopy, and X‐ray energy dispersive spectroscopy (EDS), the obtained Pd@Pt DENs are monodispersed and located inside the cavity of dendrimers, and they show a different structure from monometallic Pt or Pd and alloy PdPt DENs. The core‐shell structure of Pd@Pt DENs is further confirmed by infrared measurements with carbon monoxide (IR‐CO) probe. In order to prepare Pd@Pt DENs, a required Pd/Pt ratio of 1:2 is determined for the Pt shell to cover the Pd core completely. Finally, a mechanism for the formation of Pd@Pt DENs is proposed.     

Facile Synthesis of Pd‐Ni Nanoparticles on Reduced Graphene Oxide under Microwave Irradiation for Formic Acid Oxidation

Pd and Pd_x Ni nanoparticles have been supported on reduced graphene oxide (Pd/rGO and Pd_x Ni/rGO ) by using the microwave‐assisted heating method in glycol. The morphology, composition and electrochemical performance have been characterized by TEM , XRD , XPS and electrochemical methods. The XRD and XPS results show that there are no PdNi alloy particles formed in Pd_x Ni/rGO and the composites exist mostly in the form of Pd⁰ and NiOOH species. The electrochemical results reveal that Pd_x Ni/rGO synthesized from the feeding source of Pd and Ni with an atomic ratio of 4∶1 exhibits higher activity, better stability and smaller electron transfer resistance toward formic acid electro‐oxidation compared with commercial Pd/C, Pd/rGO and other Pd_x Ni/rGO samples. The excellent electrocatalytic performance indicates that the addition of appropriate amount of Ni can greatly enhance the activity and stability of Pd catalysts for formic acid oxidation.     

Surface‐State‐Mediated Charge‐Transfer Dynamics in CdTe/CdSe Core–Shell Quantum Dots

Herein, we report the synthesis of aqueous CdTe/CdSe type‐II core–shell quantum dots (QDs) in which 3‐mercaptopropionic acid is used as the capping agent. The CdTe QDs and CdTe/CdSe core–shell QDs are characterized by X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM), steady‐state absorption, and emission spectroscopy. A red shift in the steady‐state absorption and emission bands is observed with increasing CdSe shell thickness over CdTe QDs. The XRD pattern indicates that the peaks are shifted to higher angles after growth of the CdSe shell on the CdTe QDs. HR‐TEM images of both CdTe and CdTe/CdSe QDs indicate that the particles are spherical, with a good shape homogeneity, and that the particle size increases by about 2 nm after shell formation. In the time‐resolved emission studies, we observe that the average emission lifetime (τ_av) increases to 23.5 ns for CdTe/CdSe (for the thickest shell) as compared to CdTe QDs (τ_av=12 ns). The twofold increment in the average emission lifetime indicates an efficient charge separation in type‐II CdTe/CdSe core–shell QDs. Transient absorption studies suggest that both the carrier cooling and the charge‐transfer dynamics are affected by the presence of traps in the CdTe QDs and CdTe/CdSe core–shell QDs. Carrier quenching experiments indicate that hole traps strongly affect the carrier cooling dynamics in CdTe/CdSe core–shell QDs.     

Peak shape analysis of Ag 3d core‐level X‐ray photoelectron spectra of Au@Ag core‐shell nanoparticles using an asymmetric Gaussian–Lorentzian mixed function

This article reports on the peak shape analysis of X‐ray photoelectron spectra of gold‐silver core‐shell (Au@Ag) nanoparticles (NPs) using an asymmetric Gaussian–Lorentzian mixed function. Unlike Ag NPs, Au@Ag NPs have no oxide peak and show asymmetric line shape with a high energy tail in Ag 3d core‐level spectra. A monotonic increase in the Ag 3d binding energy and a decrease in the degree of asymmetry with increasing the Ag shell thickness were observed supporting the occurrence of charge transfer from Au core to Ag shell. Copyright © 2012 John Wiley & Sons, Ltd.     

Size‐Controlled Synthesis of Platinum–Copper Hierarchical Trigonal Bipyramid Nanoframes

Mastery over the structure of materials at nanoscale can effectively tailor and control their catalytic properties, enabling enhancement in both activity and durability. We report a size‐controlled synthesis of novel Pt–Cu hierarchical trigonal bipyramid nanoframes (HTBNFs). The obtained nanocrystals looked like a trigonal bipyramid on the whole, composed of similar ordered frame structural units. By varying the amount of KI involved in the reaction, HTBNFs with variable sizes from 110 to 250 nm could be obtained. In addition, the structure of HTBNFs could be preserved only in a limited range of the Pt/Cu feeding ratio. Relative to the commercial Pt/C, these Pt–Cu HTBNFs with different Pt/Cu ratio exhibited enhanced electrocatalytic activity toward formic acid oxidation reaction as much as 5.5 times in specific activity and 2.1 times in mass activity. The excellent electrocatalytic activity and better durability are due to the unique structure of HTBNFs and probably synergetic effects between Pt and Cu.     

Pd@Pt Core–Shell Nanoparticles with Branched Dandelion‐like Morphology as Highly Efficient Catalysts for Olefin Reduction

A facile synthesis based on the addition of ascorbic acid to a mixture of Na₂PdCl₄, K₂PtCl₆, and Pluronic P123 results in highly branched core–shell nanoparticles (NPs) with a micro–mesoporous dandelion‐like morphology comprising Pd core and Pt shell. The slow reduction kinetics associated with the use of ascorbic acid as a weak reductant and suitable Pd/Pt atomic ratio (1:1) play a principal role in the formation mechanism of such branched Pd@Pt core–shell NPs, which differs from the traditional seed‐mediated growth. The catalyst efficiently achieves the reduction of a variety of olefins in good to excellent yields. Importantly, higher catalytic efficiency of dandelion‐like Pd@Pt core–shell NPs was observed for the olefin reduction than commercially available Pt black, Pd NPs, and physically admixed Pt black and Pd NPs. This superior catalytic behavior is not only due to larger surface area and synergistic effects but also to the unique micro–mesoporous structure with significant contribution of mesopores with sizes of several tens of nanometers.     

Palladium Nanoparticles Supported on Titanium‐Doped Graphitic Carbon Nitride for Formic Acid Dehydrogenation

Pd nanoparticles (NPs) supported on Ti‐doped graphitic carbon nitride (g‐C₃N₄) were synthesized by a deposition–precipitation route and a subsequent reduction with NaBH₄. The features of the NPs were studied by XRD, TEM, FTIR, XPS, EXAFS and N₂‐physisorption measurements. It was found that the NPs had an average size of 2.9 nm and presented a high dispersion on the surface of Ti‐doped g‐C₃N₄. Compared to Pd loaded on pristine g‐C₃N₄, the Pd NPs supported on Ti‐doped g‐C₃N₄ exhibited a high catalytic activity in formic acid dehydrogenation in water at room temperature. The enhanced activity could be attributed to the small Pd NPs size, as well as the strong interaction between Pd NPs and Ti‐doped g‐C₃N₄.     

l‐Arginine‐Triggered Self‐Assembly of CeO2 Nanosheaths on Palladium Nanoparticles in Water

Pd@CeO₂ core–shell nanostructures with a tunable Pd core size, shape, and nanostructure as well as a tunable CeO₂ sheath thickness were obtained by a biomolecule‐assisted method. The synthetic process is simple and green, as it involves only the heating of a mixture of Ce(NO₃)₃, l ‐arginine, and preformed Pd seeds in water without additives. Importantly, the synthesis is free of thiol groups and halide ions, thus providing a possible solution to the problem of secondary pollution by Pd nanoparticles in the sheath‐coating process. The Pd/CeO₂ nanostructures can be composited well with γ‐Al₂O₃ to create a heterogeneous catalyst. In subsequent tests of catalytic NO reduction by CO, Pd@CeO₂/Al₂O₃ samples based on Pd cubes (6, 10, and 18 nm), Pd octahedra (6 nm), and Pd cuboctahedra (9 nm) as well as a simply loaded Pd cube (6 nm)–CeO₂/Al₂O₃ sample were used as catalysts to investigate the effects of the Pd core size and shape and the hybrid nanostructure on the catalytic performance.     

Discrete Silver(I)‐Palladium(II)‐Oxo Nanoclusters, {Ag4Pd13} and {Ag5Pd15}, and the Role of Metal–Metal Bonding Induced by Cation Confinement

We introduce the class of discrete silver(I)‐palladium(II)‐oxo nanoclusters with the preparation of {Ag₄Pd₁₃} and {Ag₅Pd₁₅}. Both polyanions represent the first examples of noble metal‐capped polyoxo‐noble‐metalates in a fully inorganic assembly, featuring an unprecedented host–guest mode containing hetero‐ and homometallic Ag–Pd and Ag–Ag bonding interactions. Comprehensive theoretical calculations suggest that the Ag–Pd metallic bonds originate partially from surface confinement of Ag^I guest ions onto the anionic polyoxopalladate host that is induced by strong electrostatic forces. This work opens the field of fully inorganic silver‐palladium‐oxo nanoclusters, which can be considered as discrete mixed noble metal precursors for the formation of monodisperse core–shell nanoparticles, with high relevance for catalysis.     

DNA‐Directed Growth of Pd Nanocrystals on Carbon Nanotubes towards Efficient Oxygen Reduction Reactions

Unique DNA‐promoted Pd nanocrystals on carbon nanotubes (Pd/DNA–CNTs) are synthesized for the first time, in which through its regularly arranged PO₄^3? groups on the sugar–phosphate backbone, DNA directs the growth of ultrasmall Pd nanocrytals with an average size of 3.4 nm uniformly distributed on CNTs. The Pd/DNA–CNT catalyst shows much more efficient electrocatalytic activity towards oxygen reduction reaction (ORR) with a much more positive onset potential, higher catalytic current density and better stability than other Pd‐based catalysts including Pd nanocrystals on carbon nanotubes (Pd/CNTs) without the use of DNA and commercial Pd/C catalyst. In addition, the Pd/DNA–CNTs catalyst provides high methanol tolerance. The high electrocatalytic performance is mainly contributed by the ultrasmall Pd nanocrystal particles grown directed by DNA to enhance the mass transport rate and to improve the utilization of the Pd catalyst. This work may demonstrate a universal approach to fabricate other superior metal nanocrystal catalysts with DNA promotion for broad applications in energy systems and sensing devices.     

Semiconductor Nanocrystal Engineering by Applying Thiol‐ and Solvent‐Coordinated Cation Exchange Kinetics

Thiol‐ and solvent‐coordinated cation exchange kinetics have been applied to engineer the composition and crystallinity of novel nanocrystals. The detailed thermodynamics and kinetics of the reactions were explored by NMR spectroscopy, time‐dependent photoluminescence (PL) characterizations and theoretical simulations. The fine structure of the colloidal semiconductor nanocrystals (CSNCs) was investigated by X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine structure (EXAFS). In this way, high‐quality p‐type Ag‐doped ZnS quantum dots (QDs) and Au@ZnS hetero‐nanocrystals with a cubic phase ZnS shell were synthesized successfully.The unprecedented dominant Ag⁺‐dopant‐induced fluorescence and p‐type conductivity in the zinc‐blende ZnS are reported.