Dynamic inventory and pricing policy in a capacitated stochastic inventory system with fixed ordering cost

We study a dynamic inventory and pricing optimization problem in a periodic review inventory system with setup cost and finite ordering capacity in each period. We show that the optimal inventory control is characterized by an (s,s^′,p) policy in four regions of the starting inventory level.     

Age-based vs. stock level control policies for a perishable inventory system

In this study, we investigate the impact of modified lotsize-reorder control policy for perishables which bases replenishment decisions on both the inventory level and the remaining lifetimes of items in stock. We derive the expressions for the key operating characteristics of a lost sales perishable inventory model, operating under the proposed age-based policy, and examine the sensitivity of the optimal policy parameters with respect to various system parameters. We compare the performance of the suggested policy to that of the classical (Q,r) type policy through a numerical study over a wide range of system parameters. Our findings indicate that the age-based policy is superior to the stock level policy for slow moving perishable inventory systems with high service levels.     

Order-based backorders in multi-item inventory systems

A new exact method is provided for evaluating the average order-based backorders of a multi-item inventory system under the (r,nQ) inventory policy for items. The key to the method is as follows: the joint inventory positions for the same epoch and for different epochs share the same conditions of being independent and uniformly distributed.     

Monotonicity properties of a class of stochastic inventory systems

We consider inventory systems which are governed by an (r,q) or (r,nq) policy. We derive general conditions for monotonicity of the three optimal policy parameters, i.e., the optimal reorder level, order quantity and order-up-to level, as well as the optimal cost value, as a function of the various model primitives, be it cost parameters or complete cost rate functions or characteristics of the demand and leadtime processes. These results are obtained as corollaries from a few general theorems, with separate treatment given to the case where the policy parameters are continuous variables and that where they need to be restricted to integer values. The results are applied both to standard inventory models and to those with general shelf age and delay dependent inventory costs.     

On the value of customer information for an independent supplier in a continuous review inventory system

We consider the inventory control problem of an independent supplier in a continuous review system. The supplier faces demand from a single customer who in turn faces Poisson demand and follows a continuous review (R, Q) policy. If no information about the inventory levels at the customer is available, reviews and ordering are usually carried out by the supplier only at points in time when a customer demand occurs. It is common to apply an installation stock reorder point policy. However, as the demand faced by the supplier is not Markovian, this policy can be improved by allowing placement of orders at any point in time. We develop a time delay policy for the supplier, wherein the supplier waits until time t after occurrence of the customer demand to place his next order. If the next customer demand occurs before this time delay, then the supplier places an order immediately. We develop an algorithm to determine the optimal time delay policy. We then evaluate the value of information about the customer’s inventory level. Our numerical study shows that if the supplier were to use the optimal time delay policy instead of the installation stock policy then the value of the customer’s inventory information is not very significant.     

A stocking policy for spare part provisioning under age based preventive replacement

A new policy, called stocking policy for ease of reference, has been advanced for joint optimization of age replacement and spare provisioning. It combines age replacement policy with continuous review (s, S) type inventory policy, where s is the stock reorder level and S is the maximum stock level. The policy is generally applicable to any operating situation having either a single item or a number of identical items. A simulation model has been developed to determine the optimal values of the decision variables by minimizing the total cost of replacement and inventory. The behaviour of the stocking policy has been studied for a number of case problems specifically constructed by 5-factor second order rotatory design and the effects of different cost elements and item failure characteristics have been highlighted. For all case problems, optimal (s, S) policies to-support the Barlow-Proschan age policy have also been determined. Simulation results clearly indicate that the optimal stocking policy is, in general, more cost-effective than the Barlow-Proschan policy.     

Analysis of optimal opportunistic replenishment policies for inventory systems by using a (s,S) model with a maximum issue quantity restriction

The analysis of optimal inventory replenishment policies for items having lumpy demand patterns is difficult, and has not been studied extensively although these items constitute an appreciable portion of inventory populations in parts and supplies types of stockholdings. This paper studies the control of an inventory item when the demand is lumpy. A continuous review (s,S) policy with a maximum issue quantity restriction and with the possibility of opportunistic replenishment is proposed to avoid the stock of these items being depleted unduly when all the customer orders are satisfied from the available inventory and to reduce ordering cost by coordinating inventory replenishments. The nature of the customer demands is approximated by a compound Poisson distribution. When a customer order arrives, if the order size is greater than the maximum issue quantity w, the order is satisfied by placing a special replenishment order rather than from the available stock directly. In addition, if the current inventory position is equal to or below a critical level A when such an order arrives, an opportunistic replenishment order which combines the special replenishment order and the regular replenishment order will be placed, in order to satisfy the customer's demand and to bring the inventory position to S. In this paper, the properties of the cost function of such an inventory system with respect to the control parameters s, S and A are analysed in detail. An algorithm is developed to determine the global optimal values of the control parameters. Indeed, the incorporation of the maximum issue quantity and opportunistic replenishment into the (s,S) policy reduces the total operating cost of the inventory system.     

Managing stochastic inventory systems with free shipping option

In many industries, customers are offered free shipping whenever an order placed exceeds a minimum quantity specified by suppliers. This allows the suppliers to achieve economies of scale in terms of production and distribution by encouraging customers to place large orders. In this paper, we consider the optimal policy of a retailer who operates a single-product inventory system under periodic review. The ordering cost of the retailer is a linear function of the ordering quantity, and the shipping cost is a fixed constant K whenever the order size is less than a given quantity – the free shipping quantity (FSQ), and it is zero whenever the order size is at least as much as the FSQ. Demands in different time periods are i.i.d. random variables. We provide the optimal inventory control policy and characterize its structural properties for the single-period model. For multi-period inventory systems, we propose and analyze a heuristic policy that has a simple structure, the (s, t, S) policy. Optimal parameters of the proposed heuristic policy are then computed. Through an extensive numerical study, we demonstrate that the heuristic policy is sufficiently accurate and close to optimal.     

Inventory control with indivisible units of stock transfer

We consider an infinite horizon, single item inventory model with backorders and a fixed lead time. Demand is stationary stochastic and review is periodic. Inventory may only be replenished in multiples of a fixed package size q but demands may be of any size. Ordering costs are linear and combined holding and shortage costs can be expressed as a convex function of the inventory position. The control policy is defined as (s, S, q), where an order is placed if the inventory position falls to or below s and the order size is the largest multiple of q which results in the inventory position not exceeding S. The parameters s and S are restricted to be multiples of q. The objective is to find the control policy that minimizes the long run average cost per unit time. The optimal solution procedure requires renewal theory and a structured search. Fortunately, a heuristic based on the ‘quantized ordering’ approach of Zheng and Chen provides solutions that are near optimal over a broad range of parameter values.     

On a stochastic inventory model with a generalized holding costs

This paper is concerned with finding the optimal replenishment policy for an inventory model that minimizes the total expected discounted costs over an infinite planning horizon. The demand is assumed to be driven by a Brownian motion with drift and the holding costs (inventory and shortages) are assumed to take some general form. This generalizes the earlier work where holding costs were assumed linear. It turns out that problem of finding the optimal replenishment schedule reduces to the problem of solving a Quasi-Variational Inequality Problem (QVI). This QVI is then shown to lead to an (s, S) policy, where s and S are determined uniquely as a solution of some algebraic equations.     

Optimal integrated production and inventory control of an assemble-to-order system with multiple non-unitary demand classes

We study a pure assemble-to-order system subject to multiple demand classes where customer orders arrive according to a compound Poisson process. The finished product is assembled from m different components that are produced on m distinct production facilities in a make-to-stock fashion. We show that the optimal production policy of each component is a state-dependent base-stock policy and the optimal inventory allocation policy is a multi-level state-dependent rationing policy. Using numerical experimentation, we first study the system behavior as a function of order size variability and order size. We show that the optimal average cost rate is more sensitive to order size variability than to order size. We also compare the optimal policy to the first-come first-serve policy and show that there is great benefit to inventory rationing. We also propose two simple heuristics and show that these can effectively mimic the optimal policy which is generally much more difficult to determine and, especially, to implement.     

Coordinating inventory control and pricing strategies: The continuous review model

We analyze an infinite horizon, single product, continuous review model in which pricing and inventory decisions are made simultaneously and ordering cost includes a fixed cost. We show that there exists a stationary (s,S) inventory policy maximizing the expected discounted or expected average profit under general conditions.     

A periodic review inventory system with two supply modes

We describe a periodic review inventory system in which there are two modes of resupply, namely a regular mode and an emergency mode. Orders placed through the emergency channel have a shorter supply lead time but are subject to higher ordering costs compared to orders placed through the regular channel. We analyze this problem within the framework of an order-up-to-R inventory control policy. At each epoch, the inventory manager must decide which of the two supply modes to use and then order enough units to raise the inventory position to a level R. We show that given any non-negative order-up-to level, either only the regular supply mode is used, or there exists an indifference inventory level such that if the inventory position at the review epoch is below the indifference inventory level, the emergency supply mode is used. We also develop procedures for solving for the two policy parameters, i.e., the order-up-to level and the indifference inventory level.     

A periodic-review inventory system with a capacitated backup supplier for mitigating supply disruptions

We consider a periodic-review inventory system with two suppliers: an unreliable regular supplier that may be disrupted for a random duration, and a reliable backup supplier that can be used during a disruption. The backup supplier charges higher unit purchasing cost and fixed order cost when compared to the regular supplier. Because the backup supplier is used at unplanned moments, its capacity to replenish inventory is considered limited. Analytical results partially characterize the structure of the optimal order policy: a state-dependent (X(i), Y(i)) band structure (with corresponding bounds of X(i) and Y(i) to be given), where i represents the status of the regular supplier. Numerical studies illustrate the structure of the optimal policy and investigate the impacts of major parameters on optimal order decisions and system costs.     

Managing the order pipeline to reduce supply chain volatility

The bullwhip effect in particular, and supply chain volatility in general, has been the subject of much analytical and empirical investigation by researchers. One goal of this work has been to determine supply chain designs and policies that minimize volatility. Using a system dynamics approach, we use three distinct supply chain volatility metrics to compare the ability of two alternative pipeline inventory management policies to respond to a demand shock. The results indicate that no one policy dominates on all three metrics of supply chain volatility. A simplistic static pipeline policy minimizes the bullwhip effect and lessens the likelihood of on-hand inventory oscillations, while a more sophisticated dynamic pipeline policy may converge more rapidly to the new equilibrium. In addition, simulation results suggest that the dynamic policy provides better customer service through fewer stockouts and backorders.     

An order expediting policy for continuous review systems with manufacturing lead-time

Expedited shipments are often seen in practice. When the inventory level of an item gets dangerously low after an order has been placed, material managers are often willing to expedite the order at extra fixed and/or variable costs. This paper proposes a single-item continuous-review order expediting inventory policy, which can be considered as an extension of ordinary (s,Q)$(s\text{,}Q)$ models. Besides the two usual operational parameters: reorder point s and order quantity Q, it consists of a third parameter called the expedite-up-to level R. If inventory falls below R at the end of the manufacturing lead-time, the buyer can request the upstream supplier to deliver part of an outstanding order via a fast transportation mode. The amount expedited will raise inventory to R, while the remaining order is delivered via a slow (regular) supply mode. Simple procedures are developed to obtain optimal operational parameters. Computational results show that the proposed policy can save large costs for a firm if service level is high, demand variability is large, the extra cost for expediting is small, or the manufacturing lead-time is long.     

An inventory model with returns and lateral transshipments

In this paper, we propose a single-item inventory model with returns. The model allows lateral transshipment of returns from one inventory system to another. Each inventory system is under continuous review and an (r, Q) policy is employed as the inventory control. An approximated closed-form solution of the system steady-state probability distribution is derived when Q is large. The approximated inventory cost and replenishment cost can be written in terms of this distribution. We show that the rejection rate of returns is reduced significantly when transshipment of returns is allowed between the inventory systems.     

On properties of discrete (r, q) and (s, T) inventory systems

We consider single-item (r, q) and (s, T) inventory systems with integer-valued demand processes. While most of the inventory literature studies continuous approximations of these models and establishes joint convexity properties of the policy parameters in the continuous space, we show that these properties no longer hold in the discrete space, in the sense of linear interpolation extension and L^?-convexity. This nonconvexity can lead to failure of optimization techniques based on local optimality to obtain the optimal inventory policies. It can also make certain comparative properties established previously using continuous variables invalid. We revise these properties in the discrete space.