Nanoparticle formation and ultrathin film electrodeposition of carbazole dendronized polynorbornenes prepared by ring-opening metathesis polymerization

We report on the synthesis, electropolymerization, and nanoparticle formation of a series of electroactive carbazole-terminated dendronized linear polynorbornenes prepared by living ring-opening metathesis polymerization (ROMP). The molecular weight (MW) of the dendronized polymers was controlled by varying the feed ratio between the dendronized monomer and first-generation Grubbs' catalyst. Ultrathin films were prepared by electrodeposition. The electrochemical behavior and viscoelastic properties of such films were found to be highly dependent on the dendron generation and linear polymer MW as studied by electrochemical quartz crystal microbalance (E-QCM). Moreover, nanoparticle formation and size/shape control were observed by tuning the surface wetting properties of the substrate during adsorption and by intramolecular cross-linking via chemical oxidation in solution.     

Synthesis of porphyrin‐embedded dendronized polymers by Suzuki polycondensation

Porphyrin‐embedded high molecular weight dendronized polymers up to fourth generation have been synthesized by Suzuki polycondensation of Fréchet‐type dendritic dibromo macromonomers and porphyrin diboronic pinacol ester. Higher generation lateral dendritic wedges not only endow the dendronized polymers with good solubility in commonly used organic solvents, but also prevent planar porphyrins and conjugated polymer backbones from aggregating by their “site isolation” effect. This type of porphyrin‐embedded dendronized polymers can be used as saturated red light‐emitting materials. With the increase of the generation of the lateral dendrons, the quantum yields of the dendronized polymers also gradually increased. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4030–4037, 2008     

Self-organizable vesicular columns assembled from polymers dendronized with semifluorinated Janus dendrimers act as reverse thermal actuators

The synthesis and structural analysis of polymers dendronized with self-assembling Janus dendrimers containing one fluorinated and one hydrogenated dendrons are reported. Janus dendrimers were attached to the polymer backbone both from the hydrogenated and from the fluorinated parts of the Janus dendrimer. Structural analysis of these dendronized polymers and of their precursors by a combination of differential scanning calorimetry, X-ray diffraction experiments on powder and oriented fibers, and electron density maps have demonstrated that in both cases the dendronized polymer consists of a vesicular columnar structure containing fluorinated alkyl groups on its periphery. This vesicular columnar structure is generated by a mechanism that involves the intramolecular assembly of the Janus dendrimers into tapered dendrons followed by the intramolecular self-assembly of the resulting dendronized polymer in a vesicular column. By contrast with conventional polymers dendronized with self-assembling tapered dendrons this new class of dendronized polymers acts as thermal actuators that decrease the length of the supramolecular column when the temperature is increased and therefore, are called reverse thermal actuators. A mechanism for this reversed process was proposed.     

A dendronized polymer is a single-molecule glass

The molecular architecture of dendronized polymers can be tuned to obtain nanoscale objects with desired properties. In this paper, we bring together experiments and computer simulations to study the thermodynamic and dynamic properties of a single dendronized polymer chain. We find that, upon changing certain architectural features, dynamic correlations characterizing backbone conformational fluctuations of a dendronized polymer exhibit dynamics akin to glass-forming bulk liquids. Thus, a dendronized polymer chain is a novel macromolecule that is a single-molecule glass. Over a range of conditions that lead to glassy dynamics, there does not appear to be any thermodynamic singularities. We discuss how a dendronized polymer is a molecular system that can directly test different models of glassy dynamics. We also show that defect densities characteristic of typical synthesis conditions do not alter the material properties of dendronized polymers.     

Synthesis and polymerization of first‐generation dendritic methacrylate macromonomers

First‐generation dendritic macromonomers with a methacryloyl end group on one side, long alkyl chains on the other side, and a biuret system with two urethane groups in the core have been synthesized. The synthesis comprises three steps with hexamethylene diisocyanate uretdione as the starting material. The branching points were introduced via biuret groups and the prepared macromonomers were polymerized by free and controlled radical polymerization. Depending on the reaction conditions linear dendronized polymers as well as branched dendronized polymers and microgels with long alkyl chains were obtained. Scanning force microscopy was used to visualize high molecular weight molecules spincoated on highly oriented pyrolytic graphite. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 614–628, 2007     

树枝状电光材料研究进展

电光材料是以光子为载体的新一代信息材料. 目前, 研究的焦点主要集中在树枝状电光材料. 综述了近几年树枝状电光材料的研究进展, 主要包括树枝状电光大分子、树枝状电光高分子以及超分子自组装电光聚合物.     

Supramolecular self-assembly of dendronized polymers: reversible control of the polymer architectures through acid-base reactions

Acid-base switchable supramolecular dendronized polyacetylenes (DPAs) with increasing steric bulk on going from generation one [G1] to three [G3], were constructed using multiple self-assembly processes between Fréchet-type [G1]-[G3]-dendritic dialkylammonium salts and a dibenzo[24]crown-8-containing polymer. The formation of the supramolecular systems is acid-base switchable to either an ON (rodlike dendronized polymers) or an OFF (flexible polymers) state. Thus, by controlling the superstructures of the supramolecular polymers with the [G1]-[G3] dendrons, it is possible to induce conformational changes within the polymer backbones. The supramolecular dendronized polymers, as well as their threading-dethreading properties, were characterized by (1)H NMR and UV absorption spectroscopies, gel permeation chromatography (GPC) and light scattering (LS). Independent measures of molecular weight (GPC, LS) indicate that DPAs behave as increasingly rigid macromolecules with each generation in solution. Molecular dynamics simulations of each DPA suggest that the lengths of the polymer backbones increase accordingly. Atomic force microscopy of the [G3]-dendronized polystyrene (DPS), as well as the DPAs, reveal surface morphologies indicative of aggregated superstructures.     

Structural effects of DNA on thermodynamic stability of DNA-dendronized polymer nanoclusters and nanoclusteration process

We studied the means by which DNA-dendronized polymer nanoclusters and the nanoclusteration process are affected by structural properties of the nanocluster components, including the length of dendronized polymer, wrapping radius of DNA, and surface charge densities on the DNA and dendronized polymer, by calculating the total free energy of the system and free energy of the nanoclusteration process. The most thermodynamically stable nanocluster conformation was then predicted based on the values of the free energies. It was found that the nanoclusters with longer dendronized polymers, shorter DNA wrapping radius, and larger surface charge density on both the DNA and dendronized polymers are more stable.     

树枝化聚合物的合成研究进展

综述了近年来由树枝状大分子和线性聚合物结合而成的树枝化聚合物的合成研究进展,着重介绍了＂大分子单体＂,＂接枝到主链＂和＂从主链接枝＂等树枝化聚合物的合成路线,以及3种路线的综合应用,并对不同合成路线的特点进行了分析。     

Synthesis and Characterization of Dendronized Polymers

Summary: This research aims at the synthesis of several dendrons with different functional groups on their surface, and their use as functionalizing agents of synthetic polymers. Two principal products were synthesized and characterized: dendronized MDI oligomers and dendronized PMMI. The results of the characterization studies of dendronized polymers demonstrated the influence of the polarity of dendrons and the dendronization pathway on the properties of the final products.     

Nanoclusteration of DNA with dendronized polymer in terms of free energy

A thermodynamic cycle for the nanoclusteration between DNA and dendronized polymer is proposed and electrostatic free energies of a series of DNA- dendronized polymer nanoclusteration processes are calculated. The free energies for assembling fixed charges and mobile ions, and the bending energies of the DNA chain wrapped around the dendronized polymer are taken into consideration. The free energies of nanoclusteration are calculated for a number of nanoclusters with different conformations at constant temperature and constant ionic strength. The effects of temperature and ionic strength on the free energy of nanoclusteration and stability of their conformations are also investigated.     

Synthesis of narrow‐polydispersity degradable dendronized aliphatic polyesters

The divergent dendronization of an ?‐caprolactone‐based polymer has been performed to provide access to dendronized polymers with sufficient biocompatibility and degradability for use as drug‐delivery scaffolds. The synthesis was performed through the tin(II) 2‐ethylhexanoate‐catalyzed polymerization of a γ‐functionalized ?‐caprolactone monomer, followed by the divergent growth of pendant polyester dendrons at each repeat unit. The resulting dendronized polymers were obtained up to the fourth generation with molecular weights as high as 80,000 Da and with polydispersities between 1.11 and 1.22. The fourth‐generation hydroxyl‐terminated dendronized polymer was degradable under a variety of aqueous conditions. A comparison of the dendronization approach with a procedure involving the ring‐opening polymerization of a second‐generation dendritic macromonomer reveals that the former procedure is best suited for the preparation of this family of dendronized polyesters because it requires shorter reaction times and affords materials with higher degrees of polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3563–3578, 2004     

Synthesis of cyclic dendronized polymers via divergent "graft-from" and convergent click "graft-to" routes: preparation of modular toroidal macromolecules

Cyclic dendronized polymers represent a new class of polymers which exhibit a donut-like "toroidal" shape. Two previous unreported methods for preparing this architecture, the divergent "graft-from" and the convergent click "graft-to" approaches, are explored and the resulting products fully characterized. This route is particularly attractive because it enables production of exact linear and cyclic dendronized analogues, enabling direct comparison of their physical properties. In this preliminary work, the divergent "graft from" approach appears to lead to materials with broad PDI at high DP, whereas the "graft to" approach yields more well-defined dendronized cyclic polymers at larger DP. On the basis of reports to date, a combination of click cyclization followed by click "grafting to" provides the most versatile route for the synthesis of cyclic dendronized polymers.     

Synthesis,characterization, and self‐assembly of comb‐dendronized amphiphilic block copolymers

Novel amphiphilic comb‐dendronized diblock copolymers composed of hydrophobic Percec‐type dendronized polystyrene block and hydrophilic comb‐like poly(ethylene oxide) grafted polymethacrylate P(PEOMA) block were designed and synthesized via two steps of atom transfer radical polymerization (ATRP). The comb‐like P(PEOMA) prepared by ATRP of macromonomers (PEOMA) with two different molecular weights (M_n = 300 and 475) were used to initiate the sequent ATRP of dendritic styrene macromonomer (DS). The molecular weights and compositions of the obtained block copolymers were determined by ¹H NMR analysis. The copolymers with relatively narrow polydispersities (1.27–1.38) were thus obtained. The bulk properties of comb‐dendronized block copolymers were studied by using differential scanning calorimetry, polarized optical microscopy and wide‐angle X‐ray diffraction (WAXD). Similar to dendronized homopolymers, the block copolymers exhibited hexagonal columnar liquid‐crystalline phase structure. By using such amphiphilic comb‐dendronized block copolymers as building blocks, the rich self‐assembly morphologies, such as twisted string, vesicle, and large compound micelle (LCM), were obtained in a mixture of CH₃OH and THF. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4205–4217, 2008     

Rodlike macromolecules through spatial overlapping of thiophene dendrons

Two novel dendritic macromonomers 7 and 8 functionalized with electroactive conjugated thiophene oligomers were synthesized by stepwise cross‐coupling reactions and the introduction of a vinyl group at the focal point. Both macromonomers were polymerized into dendronized polymers 9 and 10 by using a radical polymerization method. The photophysical and redox behaviors of dendronized polymers 9 and 10 are significantly different from those of the corresponding macromonomers. This difference may result from the spatial overlapping of thiophene dendrons through π–π interactions when the dendrons are connected to a polymer backbone. The dendronized polymers can organize into large‐area two‐dimensional sheets with a thickness of 4.8 nm. Polymer 9 , which has all‐dendritic thiophene side chains, exhibited enhanced conductivity by partial doping with iodine or nitrosonium tetrafluoroborate (NOBF₄). The novel amphiphilic dendronized polymer 15 was synthesized by the atom‐transfer radical polymerization of macromonomer 7 from a poly(ethylene glycol) (PEG) macroinitiator and was found to have a self‐organized structure in water.     

Synthesis of dendronized polymers through bergman cyclization of enediyne‐containing Frechet‐type dendrimers

In this article, dendronized polymers with rigid backbones were synthesized from enediyne‐containing Frechet‐type dendrimers. Two generations of dendrimers were conically incorporated with 3‐(2‐(2‐(trimethylsilyl)ethynyl)phenyl)prop‐2‐yn‐1‐ol. The trimethylsilyl protection groups of enediyne units were subsequently removed, and two types of brush polymers with rigid conjugated backbone were prepared through Bergman cyclization polymerization at elevated temperature under vacuum. The dendronized polymers were characterized with GPC, IR, UV–vis, and NMR spectroscopy. Furthermore, the morphology of the dendronized polymer was revealed by atomic force microscopy. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of an anionically chargeable, high-molar-mass, second-generation dendronized polymer and the observation of branching by scanning force microscopy

An efficient synthesis of a methacrylate-based, second-generation (G2) dendronized macromonomer and its free radical polymerization to the corresponding high-molar-mass G2 dendronized polymer are described. The molar mass is determined by gel permeation chromatography (GPC), light-scattering, and analytical ultracentrifugation and compared with values estimated from a scanning force microscopy (SFM) contour lengths analysis of individualized polymer strands on mica. The polymer carries terminal tert-butyl-protected carboxyl groups, the degree of deprotection of which with trifluoroacetic acid is quantified by NMR spectroscopy using the highest molar mass sample. SFM imaging of both protected (noncharged) and unprotected (charged) dendronized polymers on solid substrates reveals mostly linear chains but also some with main-chain branches. The nature of these branches is investigated and the degree roughly estimated to which they are formed. Finally, a synthetic model experiment is described which sheds some light on the aspect of whether chain transfer, a process that could lead to covalent branching, is of importance in the synthesis of the present dendronized polymers.     

树枝化对聚芴类分子发光行为的影响

运用稳态吸收、稳态荧光光谱及皮秒时间分辨荧光光谱等手段, 研究了树枝化对聚芴分子的光谱动力学行为的影响. 在1×10-5 mol/L四氢呋喃溶液中, 非树枝化聚芴和不同代数的树枝化聚芴的稳态吸收和稳态荧光光谱基本一致, 表明树枝化不影响聚芴基团的本征电子性质; 在薄膜状态下, 紧密排列的聚芴分子表现出明显的链间聚集行为. 不同代数树枝化聚芴的时间分辨荧光动力学研究结果表明, 溶液状态下的发光为单指数衰减行为, 而薄膜状态下的发光为多指数衰减行为, 且其发光寿命随树枝化代数增加而增长, 表明树枝化基团抑制了邻近的聚芴分子之间能量传递所致的激发态能量耗散.     

树枝化聚合物的合成、结构表征及其应用

本文综述了由树枝状大分子和线形聚合物结合而形成的一类新型树形聚合物--树枝化聚合物的研究进展,包括树枝化聚合物的各种合成方法、结构表征和形态分析等.同时对树枝化聚合物在催化载体、纳米材料、生化和光电功能材料等领域的应用研究进行了详尽的综述.     

Molecular structure of single DNA complexes with positively charged dendronized polymers

Positively charged dendronized polymers with protonated amine groups at the periphery and different dendron generations are cylindrically shaped nanoobjects whose radii and linear charge densities can be varied systematically. These polyelectrolytes have been complexed with DNA and subsequently adsorbed on precoated mica substrates. The analysis of scanning force microscopy data indicates that DNA wraps around the dendronized polymers. The calculated pitch is 2.30 +/- 0.27 and 2.16 +/- 0.27 nm for DNA wrapped around dendronized polymers of generation two and four, respectively. The complex with the second generation has been shown to be negatively charged, which is consistent with the theory of spontaneous overcharging of macro-ion complexes, when the electrostatic contribution to the free energy dominates over the elastic energy. The complexes may be of interest for the development of nonviral gene delivery systems.