Polymerization of cyclic monomers, 1. Radical polymerization of unsaturated spiro orthocarbonates

7-Methyl-2-methylene- ( 1 ) and 7-methyl-2,3-dimethylene-1,4,6,9-tetraoxaspiro[4.4]nonane (2) were synthesized and characterized by elemental analysis, IR, ¹H NMR and ¹³C NMR spectroscopy. Radical polymerization of the spiro orthocarbonates (SOC) 1 and 2 show that they undergo primarily vinyl polymerization with a low degree of ring-opening reaction. Homopolymerization of 2 at 120°C with di-tert-butyl peroxide gives a transparent crosslinked polymer and the polymerization generates a 12,5% shrinkage in volume.     

Synthesis of polymeric nanocapsules with a crosslinked shell through interfacial miniemulsion polymerization

A water‐soluble comonomer, N‐isopropylacrylamide (NIPAM), and an oil‐soluble crosslinker, divinylbenzene (DVB), have been combined in a system for the synthesis of nanocapsules with crosslinked shells through interfacial miniemulsion polymerization by encapsulating a liquid nonsolvating hydrocarbon. Oligomers of poly(N‐isopropylacrylamide) (PNIPAM) were dehydrated and separated from the aqueous phase and were adsorbed by the nanodroplets or latex particles and then anchored at their interfaces by means of a crosslinking reaction. Nanocapsules were then formed through encapsulation of the hydrocarbon by the newly produced polymers at the interfaces of the droplets. The crosslinked structure gradually grew to stabilize the shell morphology. The incorporation of NIPAM into the shell copolymers has been verified by FTIR and solid‐state ¹³C NMR data. The fact that the number of nanocapsules increases with increasing amounts of DVB and NIPAM supports the formation of nanocapsules following interfacial (co)polymerization. Therefore, a mechanism for the formation of nanocapsules through interfacial (co)polymerization induced by NIPAM and DVB is proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1522–1534, 2009     

Functionalized latexes as substrates for atom transfer radical polymerization

The application of atom transfer radical polymerization (ATRP) to the homopolymerization of 2‐hydroxyethyl acrylate and 2‐(methacryloyloxy) ethyl trimethylammonium chloride at the surface of a crosslinked polystyrene latex functionalized with alkyl bromide groups is reported. Polymerization was carried out using the surface groups of the dialyzed latex as initiators. The resulting hydrophobic core, hydrophilic shell latexes, were analyzed by FTIR, ¹³C‐NMR spectroscopy, and dynamic light scattering.     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

Application of cationic polymerization to grafting and coating of silica particles

The cationic polymerization of electron rich monomers such as vinyl ethers, vinyl furane, and cyclopentadiene on silica surfaces can be initiated by aryl methyl halides. The reactions yield always soluble polymers (by heterogeneous catalysis) and novel polymer/silica hybrid materials. The link between polymer and solid is caused by covalent Si-O-C bonds, by network formation of the polymers during the chain growth, or by a combination of both of them. The analysis of the polymer structures on the surface by ¹H MAS NMR spectroscopy in suspension and by solid state ¹³C CP MAS NMR spectroscopy is described. Proof of Si-O-C bonds via DRIFT spectroscopy and ¹³C CP MAS NMR spectroscopy is given. The most effective method of irreversibly linking the polymer to the silica surface is the network formation. Polyvinyl ethers are bound strongly to the surface, as can be shown by FTIR measurements, but the linkage is not stable due to the Si-O-C bonds' susceptibility to hydrolysis. Poly-cyclopentadienes (PCPD) are linked to the surface by Si-O-C bonds, which show an extraordinary high resistance to acids and bases. Si-O-C bond formation of poly-2-vinyl furane could not yet be detected by ¹³C CP MAS NMR spectroscopy and DRIFT spectroscopy. In this case the high degree of coating derives from the bifunctionality of 2-vinyl furane: it may undergo Friedel-Crafts-alkylation at the 5-position of the furane ring as well as chain polymerization via the vinyl group at the 2-position.     

Strontium‐based initiator system for ring‐opening polymerization of cyclic esters

An amino isopropoxyl strontium (Sr‐PO) initiator, which was prepared by the reaction of propylene oxide with liquid strontium ammoniate solution, was used to carry out the ring‐opening polymerization (ROP) of cyclic esters to obtain aliphatic polyesters, such as poly(ε‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA). The Sr‐PO initiator demonstrated an effective initiating activity for the ROP of ε‐caprolactone (ε‐CL) and L‐lactide (LLA) under mild conditions and adjusted the molecular weight by the ratio of monomer to Sr‐PO initiator. Block copolymer PCL‐b‐PLLA was prepared by sequential polymerization of ε‐CL and LLA, which was demonstrated by ¹H NMR, ¹³C NMR, and gel permeation chromatography. The chemical structure of Sr‐PO initiator was confirmed by elemental analysis of Sr and N, ¹H NMR analysis of the end groups in ε‐CL oligomer, and Fourier transform infrared (FTIR) spectroscopy. The end groups of PCL were hydroxyl and isopropoxycarbonyl, and FTIR spectroscopy showed the coordination between Sr‐PO initiator and model monomer γ‐butyrolactone. These experimental facts indicated that the ROP of cyclic esters followed a coordination‐insertion mechanism, and cyclic esters exclusively inserted into the Sr–O bond. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1934–1941, 2003     

Mixture of Azolium Tetraphenylborate with Isopropylthioxanthone: A New Class of N-Heterocyclic Carbene (NHC) Photogenerator for Polyurethane,Polyester, and ROMP Polymers Synthesis

In the search of smarter routes to control the conditions of N-heterocyclic carbene (NHCs) formation, a two-component air-stable NHC photogenerating system is reported. It relies on the irradiation at 365 nm of a mixture of 2-isopropylthioxanthone (ITX) with 1,3-bis(mesityl)imidazoli(ni)um tetraphenylborate. The photoinduced liberation of NHC is evidenced by reaction with a mesitoyl radical to form an NHC-radical adduct detectable by electron spin resonance spectroscopy. The NHC yield can be determined by ¹H NMR spectroscopy through the formation of a soluble and stable NHC–carbodiimide adduct. To deprotonate the azolium salt and liberate the NHC, a mechanism is proposed in which the role of base is played by ITX radical anion formed in situ by a primary photoinduced electron-transfer reaction between electronically excited ITX (oxidant) and BPh₄⁻ (reductant). An NHC yield as high as 70 % is achieved upon starting with a stoichiometric ratio of ITX and azolium salt. Three different photoNHC-mediated polymerizations are described: synthesis of polyurethane and polyester by organocatalyzed step-growth polymerization and ring-opening copolymerization, respectively, and generation of polynorbornene by ring-opening metathesis polymerization using an NHC-coordinated Ru catalyst formed in situ.     

Polymerization of cyclic monomers, 4. Synthesis and radical polymerization of bi- and trifunctional 2-vinylcyclopropanes

Multifunctional 2-vinylcyclopropanes were synthesized by esterification of the 1-methoxycarbonyl-2-vinylcyclopropane-1-carboxylic acid with ethylene glycol, 1,1,1-trimethylolpropane or 1,4-cyclohexanediol in the presence of 1,3-dicyclohexylcarbodiimide (DCC). The structure of the new vinylcyclopropanes was confirmed by elemental analysis, IR, ¹H NMR and ¹³C NMR spectroscopy. The radical polymerization of the 2-vinylcyclopropanes in bulk with 2,2′-azoisobutyronitrile (AIBN) results in transparent crosslinked polymers. The polymerization of the liquid monomers is accompanied by a low shrinkage in volume.     

Synthesis, characterization and hydrolytic degradation of linear and crosslinked poly[(glycino ethyl ester)(allyl amino)phosphazene]

Polyorganophosphazenes substituted by glycino ethyl ester and allylamine with different ratios were synthesized and their structures were characterized by ¹H NMR, ³¹P NMR and FTIR. Via the crosslink reaction, a novel biodegradable crosslinked polyorganophosphazene material was obtained. DSC and FTIR spectra indicated the occurrence of crosslink. Hydrolysis studies were also performed to compare the crosslinked polymers with linear ones. The co-substituted polyorganophosphazenes with more allylamine at pendant groups exhibited a lower degradation rate than poly[bis(glycino ethyl ester)phosphazene] and crosslinked polyphosphazenes had an even lower degradation rate. SEM photographs characterized the surface of polyphosphazenes films after hydrolytic degradation, confirming that uncrosslinked ones had outstanding hydrolytic evidences at the surface while the crosslinked ones only had sporadic small erosion holes, remaining much smoother.     

Kinetic studies of the polymerization of an epoxy resin modified with rhodamine B

Novel fluorescent materials were satisfactorily synthesized. With this aim, an epoxy resin based on diglycidyl ether of bisphenol A (DGEBA) was reacted with a laser dye, rhodamine B (RB), to achieve an epoxy-based prepolymer. Then, a diamine, m-xylylenediamine (MXDA), was used as hardener with the purpose of obtaining a crosslinked polymer. The curing conditions strongly influence the intended final properties and the optimization of the curing requires a reliable kinetic model. For that reason, this work presents the kinetic study of the polymerization of the epoxy resin by differential scanning calorimetry (DSC) in isothermal mode as well as by Fourier transform infrared spectroscopy (FTIR). DSC data were fitted using a Kamal autocatalytic equation. Conversion as a function of reaction time curves obtained by means of both techniques agreed well. In addition, the synthesized epoxy-based materials were characterized by proton nuclear magnetic resonance spectroscopy (¹H NMR) and their fluorescent properties were also analysed.     

Characterization of dextrin hydrogels by FTIR spectroscopy and solid state NMR spectroscopy

Fourier transform infrared (FTIR) and ¹³C solid state nuclear magnetic resonance (NMR) spectroscopy were used to study dextrin structural changes occurring upon hydrogel formation by vinyl acrylate (VA) grafting and subsequent free radical polymerization. The degrees of VA substitution (DS) and polymerization (DP) were quantified up to 40%VA by FTIR intensity measurements and partial least squares (PLS)/FTIR, the latter being a faster and less error-prone method. Above 40%VA, both parameters are underestimated by FTIR. A spin counting NMR experiment showed high carbon observabilities for hydrogels and improved PLS/NMR models were achieved for DS and DP determination. Alternative NMR integration methods are hindered by the broad VA peaks and need for area correction, due to their CP dynamics. NMR changes in C1 profile showed that a single helical conformation predominates at lower %VA, being replaced by disordered conformations as %VA increases. Furthermore, a correlation FTIR/NMR study indicated that ring conformations are significantly affected in hydrogels, compared to unpolymerized dextrin.     

Bioreducible and core‐crosslinked hybrid micelles from trimethoxysilyl‐ended poly(ε‐caprolactone)‐S‐S‐poly(ethylene oxide) block copolymers: Thiol‐ene click synthesis and properties

Bioreducible and core‐crosslinked hybrid micelles were for the first time fabricated from biodegradable and biocompatible trimethoxysilyl‐terminated and disulfide‐bond‐linked block copolymers poly(ε‐caprolactone)‐S‐S‐poly(ethylene oxide), which were prepared by combining thiol‐ene coupling reaction and ring‐opening polymerization. The molecular structures, physicochemical, self‐assembly, and bioreducible properties of these copolymers were thoroughly characterized by means of FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, wide‐angle X‐ray diffraction, dynamic light scattering (DLS), and transmission electron microscopy. The core‐crosslinking sol‐gel reaction was confirmed by ¹H NMR, and the core‐crosslinked hybrid micelles contained about 3 wt % of silica. The bioreducible property of both uncrosslinked and core‐crosslinked micelles in 10 mM 1,4‐dithiothreitol (DTT) solution was monitored by DLS, which demonstrated that the PEO corona gradually shedded from the PCL core. The anticancer doxorubicin drug‐loaded micelles showed nearly spherical morphology compared with blank micelles, presenting a DTT reduction‐triggered drug‐release profile at 37 °C. Notably, the core‐crosslinked hybrid micelles showed about twofold drug loading capacities and a half drug‐release rate compared with the uncross‐liked counterparts. This work provides a useful platform for the fabrication of bioreducible and core‐crosslinked hybrid micelles potential for anticancer drug delivery system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The use of FTIR and NMR spectroscopies to study prepolymerisation interactions in nitrogen heterocycles

A detailed investigation into the functional groups responsible for the formation of a noncovalent complex between 2-aminopyridine (template) and methacrylic acid (functional monomer) has been carried out using FTIR spectroscopy and confirmed by ¹H NMR spectroscopic data. The approach adopted to confirm the mechanism of interaction was the analysis of the template plus the structurally similar 2-methylaminopyridine and 2-dimethylaminopyridine. A 1:1 stoichiometry of complexation was determined by Job plot analysis following titration, with FTIR results complementing those of the ¹H NMR study. The strength of interaction between 2-aminopyridine and the functional monomer measured through band shifts by FTIR spectroscopy was compared with such interactions for the isomers 3- and 4-aminopyridine. This comparison identified a clear correlation between template pK _a, degree of interaction and subsequent nonspecific binding in the nonimprinted polymer. Using FTIR spectroscopy it was also possible to observe the effect of temperature on the prepolymerisation solution. IR spectra showed that lower temperatures led to more stabilized interactions of the hydrogen-bonded complex. The potential advantages of FTIR spectroscopy compared with ¹H NMR spectroscopy in studying prepolymerisation solutions have been identified.     

Cationic Emulsion Polymerization of Octamethylcyclotetrasiloxane (D4) in Mixtures with Alkoxysilanes

The cationic emulsion polymerization of octamethylcyclotetrasiloxane (D4) in mixtures with methyltriethoxysilane (MTES) and vinyltriethoxysilane (VTES) was studied by FTIR ATR, GC, the development of a toluene insoluble fraction of the polymer and a gravimetric analysis. The polymerization of D4 alone was also conducted for comparison and, additionally, the development of molecular weight of polydimethylsiloxane (PDMS) obtained in that process was studied by GPC. Dodecylbenzenesulphonic acid (DBSA) was used as a surfactant and catalyst. The process was carried out in a “starved feed” mode by adding dropwise the monomer mixture to the aqueous solution of DBSA. FTIR ATR spectra were recorded by the sensor placed in the probe tip of a ReactIR 15^TM apparatus. It was found that the silicone polymer formation proceeded faster when D4 was polymerized in the mixture with alkoxysilanes, especially in the beginning of the process, and that already at the beginning of the process, the partly crosslinked polymer was formed. The induction period of ca. 30 min was observed and the concentration of cyclic siloxanes (D4 and decamethylcyclopentasiloxane—D5) remained at a very low level in the course of the reaction and only traces were detected in the final product. The particle size development in the course of the reaction was also studied and it was found that the particle size distribution was bimodal and was broadening as the reaction proceeded, though this phenomenon was less distinct when D4 was polymerized in the mixtures with alkoxysilanes. The structure of the reaction product was confirmed by ²⁹Si NMR.     

Synthesis, characterization, and polymerization of vinylmelamines

Abstract  

Vinyl functionalized melamine derivatives for cross-linking based on polymerization were synthesized as potential substitutes for harmful formaldehyde in melamine resins. Methylmelamines undergo direct vinylation with acetylene to the corresponding vinylmelamines in more than 95% conversion. Their chemical structures were fully characterized by mass spectrometry, Fourier transform infrared (FTIR) spectroscopy, elementary analysis, ¹H, ¹³C, and 2D correlation nuclear magnetic resonance (NMR) experiments. Linear and cross-linked polymers were prepared by free radical polymerization neat and in solution and characterized by size exclusion chromatography (SEC) and matrix-assisted laser desorption ionization time-of-flight (MALDI-ToF) mass spectrometry.     

Synthesis,characterization and stimuli-sensitive properties of novel linear and crosslinked polybetaines based on acrylic acid and ethyl 3-aminocrotonate

Novel linear and crosslinked polybetaines based on acrylic acid (AA) and ethyl 3-aminocrotonate (CRO) have been synthesized by a Michael addition reaction followed by radical polymerization. The polymerization of AA and CRO was carried out in bulk, water and organic solvents. The dependence of polymer yield on the molar ratio of monomers and water content was found. Primary attention was paid to linear and crosslinked polybetaines synthesized at equimolar ratio of monomers in the feed. The composition and structure of linear polybetaines was determined by elemental analysis, potentiometric titration, FTIR and NMR spectroscopy. The isoelectric points of linear and crosslinked polybetaines determined by electrophoresis, viscometry and swelling experiments corresponded to pH 2.0-2.2. The stimuli-sensitive properties of amphoteric gels were studied as a function of pH, ionic strength, water-organic solvent mixture, electric, and combined electric and magnetic fields. Appearance of pH gradient within the polyampholyte gel matrix under the externally imposed DC electric field was observed.     

Synthesis,polymerization, and thermal properties of benzoxazine based on bisphenol‐S and allylamine

A bifunctional benzoxazine monomer, 6,6′‐bis(3‐allyl‐3,4‐dihydro‐2H‐benzo[e][1,3]oxazinyl) sulfone (BS‐ala), was synthesized from bisphenol‐S, allylamine and formaldehyde via a solution method. The chemical structure of BS‐ala was confirmed by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and elemental analysis. The polymerization behavior of BS‐ala was investigated by FTIR, solid‐state ¹³C NMR, and differential scanning calorimetry (DSC). The oxazine ring opening polymerization is prior to the addition polymerization of allyl group, and the exothermic peaks corresponding to the two reactions appear partially overlapped in the DSC curve. The storage modulus of the resultant polybenzoxazine at 25°C is about 3.9 GPa, and the glass transition temperature is 254°C. The 5% and 10% weight loss temperatures of the polybenzoxazine are about 335°C and 361°C in both air and nitrogen, respectively. The char yield is about 58% at 800°C in nitrogen, whereas almost no residue is remained at 700°C in air. Copyright © 2012 John Wiley & Sons, Ltd.     

Biocatalytic synthesis of polymers. II. Preparation of [AA–BB]x polyesters by porcine pancreatic lipase catalyzed transesterification in anhydrous,low polarity organic solvents

Enzyme-catalyzed preparation of polymers offers several potentially valuable advantages over the usual polymerization procedures. (1) Such polymerizations may allow the polymer to retain functionality that would be destroyed under normal polymerization conditions. (2) The selectivity provided by enzyme catalysts may permit polymers, including optically active polymers, to be prepared that are either not accessible or accessible only with difficulty by other methods. (3) The characteristics of the enzyme and the mild polymerization conditions may permit formation of polymers having highly regular sizes and backbone structures. This report describes the first successful use of an enzyme-catalyzed polycondensation to prepare a chiral (AA–BB)_x polyesters of more than a few repeat units. Polymerization of bis(2,2,2-trichloroethyl) alkanedioates (BB) with diols (AA) using the enzyme porcine pancreatic lipase (PPL) as a catalyst is detailed. The polycondensations were carried out at ambient temperature in anhydrous, low polarity organic solvents such as ether, THF, and methylene chloride. End group analysis by NMR provided M_n values of 1300–8200 daltons while GPC provided M_w values of 2800–14900 daltons for the polymers. Based on proton NMR spectra obtained during the polymerization, relatively rapid formation of an AA–BB “dimer” and an AA–BB–AA “trimer,” slower formation of a BB–AA–BB “trimer,” and subsequent condensation of these to give higher polymers are suggested to be components of the polymerization mechanism.     

Preparation and characterization of fluorinated acrylate copolymer latexes by miniemulsion polymerization under microwave irradiation

Fluoroacrylate copolymer miniemulsion was prepared by miniemulsion polymerization under microwave irradiation. The composition of the copolymer was determined by FTIR, DSC, ¹H NMR and ¹⁹F NMR. The morphology, size, and size distribution of the latex particles as well as changes in the size during polymerization were characterized by TEM and photon correlation spectroscopy (PCS). The effects of kinetic parameters on the polymerization were evaluated. The particle size of latex underwent almost no change during microwave irradiation polymerization. The diameters of latex particles prepared by microwave irradiation were smaller and more monodispersed than those prepared by conventional heating and the latex had good centrifugal stability. Polymerization under microwave irradiation had a higher reaction rate and higher conversion than traditional heating. By using 10 wt% fluoromonomer, the surface energy of the latex film could be reduced from 27.24 mJ/m² (latex film of fluorine-free) to 17.59 mJ/m² and the decomposition temperature increased by 25 °C.     

Multicopper Oxidase-Catalyzed Biotransformation of Dihydroquercetin

Multicopper oxidases such as bilirubin oxidase (BOD) from Myrothecium verrucaria and laccase (LC) from the basidial fungus Trametes hirsuta have been used as catalysts in dihydroquercetin (DHQ) oxidative polymerization. The conditions selected enabled good yields of DHQ oligomers, which were then analyzed using UV-vis, FTIR, ¹Н and ¹³С NMR spectroscopy. DHQ oligomers synthesized using both enzymes showed higher thermostability as compared with the monomer. Depending on the oxidase, the products of DHQ polymerization differed in physicochemical properties, and as shown by NMR studies, had different structures.