Spectrophotometric determination of lead in industrial, environmental, biological and soil samples using 2,5-dimercapto-1,3,4-thiadiazole

A very simple, ultra-sensitive and fairly selective non-extractive spectrophotometric method for the determination of trace amounts of lead with 2,5-dimercapto-1,3,4-thiadiazole (DMTD) has been developed. DMTD reacts in slightly acidic (0.0015-0.01 M HCl) aquatic media with lead(II) to give a greenish-yellow chelate, which has an absorption maximum at 375 nm. The reaction is instantaneous and absorbance remains stable for 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 4.93x10(4) lmol(-1)cm(-1) and 15 ngcm(-2) of Pb, respectively. Linear calibration graphs were obtained for 0.1-40 mugml(-1) of Pb; the stoichiometric composition of the chelate is 1:2 (Pb-DMTD). The interference from over 50 cations, anions and complexing agents has been studied at 1 mugml(-1) of Pb. The method developed was used successfully in the determination of lead in several standard reference materials (alloys and steels), environmental waters (potable and polluted), biological samples (human blood and urine), soil samples, solutions containing both lead(II) and lead(IV) and complex synthetic mixtures. The method has high precision and accuracy (S=+/-0.01 for 0.5 mugml(-1)).     

A kinetic method for the determination of copper(II) by its catalytic effect on the oxidation of 3-methyl-2-benzothiazolinone hydrazone with hydrogen peroxide: a mechanistic study.

A catalytic spectrophotometric method for the determination of traces of copper(II) is proposed. 3-Methyl-2-benzothiazolinone hydrazone (MBTH) is oxidized by hydrogen peroxide to form a yellowish-brown compound. The reaction is accelerated by trace amounts of copper(II), and can be followed by measuring the increase in the absorbance at 390 nm. Since the absorbance at 40 min from the reaction start increases with an increase in the copper(II) concentration, the absorbance value is used as a parameter for copper(II) determination. Under the optimum experimental conditions (8.4 x 10(-3) mol dm(-3) MBTH, 0.7 mol dm(-3) hydrogen peroxide, pH 5.2, 35 degrees C), copper(II) can be determined in the range 0-50 microg dm(-3). The relative standard deviations are 6.9, 3.5, 2.7% for 2, 20 and 40 microg dm(-3), respectively. The detection limit of this method (3sigma) is 0.27 microg dm(-3). It was successfully applied to a determination of copper(II) in river water, tap water and ground-water samples. According to the results of a kinetic study, a mechanism is proposed which leads to the following rate equation: R0(cat) = kK1K2[MBTH][H2O2][Cu(II)]0/{(1 + K2[H2O2])[H+]}.     

Determination of chromium, copper and lead in river water by graphite-furnace atomic absorption spectrometry after coprecipitation with terbium hydroxide.

Coprecipitation with terbium hydroxide quantitatively recovered trace amounts of chromium(III), copper(II) and lead(II) at pH 8.4 - 10.8, 8.0 - 11.5 and 8.7 - 11.5, respectively. The precipitate was dissolved in 0.85 mol dm(-3) nitric acid, and the analytes were determined by graphite-furnace atomic absorption spectrometry (GF-AAS). The presence of terbium (up to 7 g dm(-3)) did not interfere with the determination. The detection limits were 0.3 microg dm(-3) for chromium, 0.4 microg dm(-3) for copper and 0.5 microg dm(-3) for lead, when the analytes in 200 cm3 of the sample solution were concentrated into 10 cm3. The ions added to river or seawater were quantitatively recovered. Chromium and copper in a contaminated river water were successfully determined.     

A rapid and sensitive extractive spectrophotometric determination of copper(II) in pharmaceutical and environmental samples using benzildithiosemicarbazone.

Benzildithiosemicarbazone (BDTSC) is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of copper(II). BDTSC reacts with copper(II) in the pH range 1.0-7.0 to form a yellowish complex. Beer's law is obeyed in the concentration range 0.5-0.4 microg cm(-3). The yellowish Cu(II)-BDTSC complex in chloroform shows a maximum absorbance at 380 nm, with molar absorptivity and Sandell's sensitivity values of 1.63 x 10(4) dm3 mol(-1) cm(-1) and 0.00389 microg cm(-2), respectively. A repetition of the method is checked by finding the relative standard deviation (RSD) (n = 10), which is 0.6%. The composition of the Cu(II)-BDTSC complex is established as 1:1 by slope analysis, molar ratio and Asmus' methods. An excellent linearity with a correlation coefficient value of 0.98 is obtained for the Cu(II)-BDTSC complex. The instability constant of the complex calculated from Edmond and Birnbaum's method is 7.70 x 10(-4) and that of Asmus' method is 7.66 x 10(-4), at room temperature. The method is successfully employed for the determination copper(II) in pharmaceutical and environmental samples. The reliability of the method is assured by analyzing the standard alloys (BCS 5g, 10g, 19e, 78, 32a, 207 and 179) and by inter-comparison of experimental values, using an atomic absorption spectrometer.     

Spectrophotometric determination of oxalate ion with N,N'-diethyl-N,N'-[[4,4'-dihydroxy-1,1'-binaphthalene]-3,3'-diyl]bisbenzamide and copper(II).

A simple and rapid spectrophotometric method for the determination of oxalate ion was established by the fading of a colored complex between N,N'-diethyl-N,N'-[[4,4'-dihydroxy-1,1'-binaphthalene]-3,3'-diyl]bisbenzamide and copper(II). Beer's law was obeyed in the concentration range of 0.1 - 2.0 microg cm(-3) for oxalate ion, with an effective molar absorptivity at 533 nm and the relative standard deviation being 8.0 x 10(3) dm(3) mol(-1) cm(-1) and 1.0% (n = 5), respectively. This proposed method has excellent reproducibility, and was applied to recovery tests of oxalate ion in tap water and human urine; the results were satisfactory. This is suggested that the method is based on the reaction of copper(II) to copper(I) with oxalate ion.     

6-Chloro-3-hydroxy-2-(5'-methylfuryl)-4H-chromene-4-one as an analytical reagent for micro determination of molybdenum(VI).

6-Chloro-3-hydroxy-2-(5'-methylfuryl)-4H-chromene-4-one (CHMFC) has been used as an analytical reagent for the spectrophotometric determination of molybdenum. Molybdenum(VI) in the presence of several cations, anions and complexing agents forms a yellow 1:2 complex with CHMFC. The complex is quantitatively extractable into 1,2-dichloroethane from 1 mol dm(-3) acetic acid medium and is stable for more than 6 h. The complex shows an absorption maximum at 438 nm with a molar absorptivity of 5.36 x 10(4) dm3 mol(-1) cm(-1) and Sandell's sensitivity equal to 0.0017 microg Mo cm(-2). The method obeys Beer's law up to 1.9 microg Mo ml(-1). The relative standard deviations are 0.2% for solutions and 0.5-1.5% for solid samples. The method is simple, selective, precise and rapid, and has been satisfactorily applied to the micro determination of molybdenum in various synthetic and standard samples.     

Selective flotation-spectrophotometric determination of trace copper(II) in natural waters, human blood and drug samples using phenanthraquinone monophenylthiosemicarbazone.

Copper(II) forms 1:1 and 1:2 intense red complexes with phenanthraquinone monophenylthiosemicarbazone (PPT) at pH 3-3.5 and > or =6.5, respectively. These complexes exhibit maximal absorbance at 545 and 517 nm, the molar absorptivity being 2.3 x 10(4) and 4.8 x 10(4) l mol(-1) cm(-1), respectively. However, the 1:1 complex was quantitatively floated with oleic acid (HOL) surfactant in the pH range 4.5-5.5, providing a highly selective and sensitive procedure for the spectrophotometric determination of CuII. The molar absorptivity of the floated Cu-PPT complex was 1.5 x 10(5) l mol)(-1) cm(-1). Beer's law was obeyed over the range 3-400 ppb at 545 nm. The analytical parameters affecting the flotation process and hence the determination of copper traces were reported. Also, the structure of the isolated solid complex and the mechanism of flotation were suggested. Moreover, the procedure was successfully applied to the analysis of CuII in natural waters, serum blood and some drug samples.     

Spectrophotometric determination of glucosamine and its analogous amino sugars with o-hydroxyhydroquinonephthalein and palladium(II).

A simple and highly sensitive spectrophotometric method for the determination of glucosamine and its analogous amino sugars was established based on fading of the palladium(II)-o-hydroxyhydroquinonephthalein-hexadecyltrimethylammonium complex. In the determination of glucosamine, Beer's law is obeyed in the range of 0.02 - 0.18 microg ml(-1), with an effective molar absorptivity at 630 nm and the relative standard deviation being 8.4 x 10(5) dm3 mol(-1) cm(-1) and 1.08% (n = 10). This method is about 70-times more sensitive than the Elson-Morgan method. The method was successfully applied to the assay of glucosamine in actual samples.     

Interaction of nickel with 4-(2'-benzothiazolylazo) salicylic acid (BTAS) and simultaneous first-derivative spectrophotometric determination of nickel(II) and iron(III)

The solution properties of nickel complex with 4-(2'-benzo-thiazolylazo) salicylic acid (BTAS) have been studied by zero-order absorption spectrophotometry in 40% (v/v) ethanol at 20 degrees C and an ionic strength of 0.1 mol dm(-3) (KNO(3)). The equilibria that exist in solution were established and the basic characteristics of complexes formed were determined. A new direct spectrophotometric method for the determination of trace amounts of the nickel is proposed based on the formation of the Ni (BTAS) complex at pH 7.0. The absorption maximum, molar absorbtivity, and Sandell's sensitivity of 1:1 (M:L) complex are 525 nm, 0.6 x 10(4) l mol(-1) cm(-1) and 2.824 x 10(-9) microg cm(-2), respectively. The use of first-derivative spectrophotometry eliminates the interference of iron and enables the simultaneous determination of nickel and iron using BTAS. Quantitative determination of Ni(II) and Fe(III) is possible in the range (0.59-7.08) and (2.1-8.4) microg ml(-1), respectively with a relative standard deviation of 0.5%. The proposed method has been successfully applied to the simultaneous spectrophotometric determination of nickel and iron in steel alloys and aluminum alloys.     

Investigation of the reaction of copper(I) with 2,9-dimethyl-1,10-phenanthroline at trace level by thermal lensing

The stability constants for copper(I) chelate with 2,9-dimethyl-1,10-phenanthroline are determined by thermal lensing, and the advantages over spectrophotometric determination of stability constants are shown. Changes in the photometric reaction when moving from the microgram to the nanogram level of reactants are discussed. The conditions for the thermal-lens determination of copper are optimized. The limit of detection of copper is 3x10(-8) mol dm(-3), and the linear calibration range 1x10(-7)-1x10(-5) mol dm(-3).     

Copper(II)-catalysed oxidative coupling reaction of 3-hydroxyacetanilide with 3-methyl-2-benzothiazolinone hydrazone for the spectrophotometric determination of traces of copper(II)

A spectrophotometric method is developed for the determination of traces of copper(II), based on the catalytic oxidative coupling reaction of 3-hydroxyacetanilide with 3-methyl-2-benzothiazolinone hydrazone in the presence of ammonia and hydrochloric acid. Beer's law is obeyed in the copper(II) concentration range of 0.008-0.16 microg mL(-1), and the molar absorptivity at 530 nm is 2.5x10(5) L mol(-1) cm(-1). The Sandell's sensitivity of the product is 0.000254 microg cm(-2). The optimum reaction conditions and other important analytical parameters have been investigated. The proposed method is applied to the analysis of water and soil samples and the results are compared with the literature method.     

A rapid spectrophotometric method for the determination of molybdenum in industrial, environmental, biological and soil samples using 5,7-dibromo-8-hydroxyquinoline.

A very simple, ultra-sensitive and highly selective non-extractive spectrophotometric method for the determination of trace amount of molybdenum(VI) using 5,7-dibromo-8-hydroxyquinoline (DBHQ) has been developed. 5,7-Dibromo-8-hydroxyquinoline reacts in a slightly acidic solution (0.05 - 1.0 M H2SO4) with molybdenum(VI) to give a deep greenish-yellow chelate which has an absorption maximum at 401 nm. The reaction is instantaneous and the absorbance remains stable for over 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 4.13 x 10(3) L mol(-1) cm(-1) and 7 ng cm(-2) of molybdenum(VI), respectively. Linear calibration graphs were obtained for 0.1 - 50 microg mL(-1) of molybdenum(VI). The stoichiometric composition of the chelate is 1:3 (Mo:DBHQ). A large excess of over 50 cations, anions and some common complexing agents (e.g. EDTA, oxalate, citrate, phosphate, thiourea, SCN-) do not interfere with the determination. The method was successfully used in the determination of molybdenum in several Standard Reference Materials (alloys, steels and waters) as well as in some environmental waters (inland and surface), biological samples (human blood and urine), soil samples, solution containing both molybdenum(V) and molybdenum(VI) and complex synthetic mixtures. The method has high precision and accuracy (S = +/-0.01 for 0.5 microg mL(-1)).     

A facile spectrophotometric method for cobalt determination using alpha-benzilmonoxime in sodium dodecylsulfate micellar solutions.

Alpha-benzilmonoxime in sodium dodecylsulfate micellar media has been used for the spectrophotometric determination of cobalt at pH 9.0. The linear range of calibration is 0.05-1.50 microg cm(-3) of cobalt at 380 nm with molar absorptivity of 3.72 x 10(4) dm3 mol(-1) cm(-1), which is about 1.5-times greater than that of the alpha-benzilmonoxime extraction based method. The relative standard deviations, recoveries, detection limit and effects of diverse ions on the determination of cobalt were studied. These analytical results were satisfactory. The method was successfully applied to the determination of cobalt in the various samples.     

Flow injection spectrophotometric determination of sub-mg dm(-3) silver(I) in a strongly acidic solution containing concentrated copper(II) using a pyridylazo reagent

A novel spectrophotometric flow injection method for determination of silver(I) in a strongly acidic solution containing concentrated copper(II) was developed using a coloring ligand, 4-(3,5-dibromo-2-pyridylazo)-N-ethyl-N-(3-sulfopropyl)aniline (3,5-diBr-PAESA). The method was first investigated by batch method. The interference from copper(II) chelate could be eliminated by the masking effect of EDTA. By utilizing the large formation constant (K = 12.3) of AgBr, one could determine silver(I) as a decrease of absorption by silver(I) chelate due to formation of AgBr by addition of KBr. Based on the results of batch experiments, two types of flow injection analysis (FIA) systems were constructed. Sub-mg dm(-3) determination of silver(I) was attained without interference from excess copper(II). The proposed method was successfully applied to determination of silver in a copper plating solution used in a plant to manufacture copper printed circuit boards, where the concentration of silver was critically important in the process control.     

4-(N,N-diethylamino) benzaldehyde thiosemicarbazone in the spectrophotometric determination of palladium

4-(N,N-diethylamino)benzaldehyde thiosemicarbazone(DEABT) is proposed as a sensitive and selective analytical reagent for the spectrophotometric determination of palladium(II). The reagent reacts with palladium (II) in a potassium hydrogen phthalate-hydrochloric acid buffer of pH 3.0, to form a yellow complex. Beer's law is obeyed in the concentration range up to 3.60 microgmL(-1). The optimum concentration range for minimum photometric error as determined by Ringbom plot method is 0.36 - 3.24 microg mL(-1). The yellow Pd(II)-DEABT complex shows a maximum absorbance at 408 nm, with molar absorptivity of 3.33 x 10(4) dm3 mol(-1) cm(-1) and Sandell's sensitivity of the complex from Beer's data, for D = 0.001, is 0.0032 microg cm(-2). The composition of the Pd(II)-DEABT complex is found to be 1:2 (M:L). The interference of various cations and anions in the method were studied. The proposed method was successfully used for the determination of Pd(II) in alloys, catalysts, complexes and model mixtures with a fair degree of accuracy.     

Spectrophotometric determination of uric acid based on fading of o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethyl-ammonium complex.

A simple and highly sensitive spectrophotometric method for the determination of uric acid (UA) was established based on fading of the o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethylammonium complex. In the determination of UA, Beer's law is obeyed in the range of 0.01-0.20 microg ml(-1), with an effective molar absorptivity at 635 nm, the relative standard deviation being 6.5 x 10(5) dm(3) mol(-1) cm(-1) and 1.5% (n = 5). This method is about 20-times more sensitive than the conventional methods. The method was successfully applied to the assay of UA in human urine.     

Spectrophotometric determination of copper in alloys using naphthazarin

Naphthazarin (5,8-dihydroxy-1,4-naphthoquinone; Naph) is proposed as a chromogenic reagent for the spectrophotometric determination of copper(II). The polynuclear complex has a mole ratio of Cu:Naph=4:6 in a 50% v/v ethanol/water medium containing 0.1 M ammonium acetate and 1.5% (w/v) sodium dodecyl sulfate. The copper-naphthazarin complex shows an absorption maximum at 330 nm with a molar absorptivity of 1.84x10(4) l mol(-1) cm(-1). Beer's law is obeyed up to 4.5 ppm of copper(II). The method was applied for copper determination in alloy samples with satisfactory results.     

A novel fluorescence reagent, 10-hydroxybenzo[h]quinoline-7-sulfonate, for selective determination of beryllium(II) ion at pg cm(-3) levels.

A facile method has been developed for the highly sensitive and selective determination of ultratrace Be(II) ion using a new fluorimetric reagent, 10-hydroxybenzo[h]quinoline-7-sulfonate (HBQS), under extremely alkaline conditions, at pH 12.0. This reagent is quite suitable for the very small ion, Be(II), to form a 6-membered chelate ring, compatible with a high fluorescence yield. The stoichiometry of the chelate is 1:1 for Be-HBQS at pH 12.0. The calibration graph gave a wide linear dynamic range, 2-100 nmol dm(-3) of Be(II) ion with the detection limit (3s blank) of 0.52 nmol dm(-3), or 4.7 pg cm(-3). The excellent sensitivity and toughness toward the matrix influence were demonstrated using the artificial sample solutions for air-dust. Coupled with the simple masking procedure using EDTA, the method enables one to determine Be(II) ion at nanomolar levels in the presence of metals at the natural abundance levels in air-dust samples, typically Al, Ca, Cu, Fe, Mg, Pb, and Zn at 130, 150, 1.0, 70, 33, 3.0, and 8.0 micromol dm(-3), respectively, in the final solution. The proposed method was successfully applied to the determination of Be in urban air.     

A new selective chromogenic reagent for the spectrophotometric determination of thallium(I) and (III) and its separation using flotation and the solid-phase extraction on polyurethane foam.

A new sensitive chromogenic reagent, 9,10-phenanthaquinone monoethylthiosemicarbazone (PET), has been synthesized and used in the spectrophotometric determination of Tl(III). In HNO3, H2SO4 or H3PO4 acids, PET can react immediately at room temperature with Tl(III) to form a red 2:1 complex with a maximum absorption at 516 nm. The different analytical parameters affecting the extraction and determination processes have been examined. The calibration curve was found to be linear over the range 0.2-10 microg cm(-3) with a molar absorptivity of 2.2 x 10(4) dm3 mol(-1) cm(-1). Sandell's sensitivity was found to be 0.0093 microg cm(-2). No interference from macroamounts of foreign ions was detected, except for Pd(II). However, Pd(II) does not affect the determination process, because its complex with PET has its lambda(max) at 625 nm. The proposed method has been applied to the determination of Tl(I and III) in synthetic and natural samples after separation by flotation (in oleic acid/kerosene) and solid-phase extraction (on polyurethane foam) techniques. The two methods were found to be accurate and not subject to random error, but solid-phase extraction was preferred because it is cheap, simpler and there is no contamination risk coming from flotation reagents.     

Synergistic extraction and spectrophotometric determination of copper(II) using 1-(2',4'-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol: analysis of alloys, pharmaceuticals and biological samples

A simple and selective spectrophotometric method was developed for the determination of copper(II) with 1-(2',4'-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol [2',4'-dinitro APTPT] as a chromogenic reagent. The procedure was based on the synergistic extraction of copper(II) with 2',4'-dinitro APTPT in the presence of 0.5 mol L(-1) pyridine to give green colored ternary complex of a molar ratio 1:2:2 (M:L:Py) in the pH range 8.7-10.5. It exhibits a maximum absorption of colored complex at 445 nm and 645 nm in chloroform against the reagent blank. Beer's law was followed in the concentration range 10-80 μg mL(-1) of copper(II) and optimum range of 20-70 μg mL(-1) the metal as evaluated from Ringbom's plot. The molar absorptivity and Sandell's sensitivity of copper(II)-2',4'-dinitro APTPT-pyridine complex in chloroform are 0.87×10(3) L mol(-1)c m(-1) and 0.072 μg cm(-2), respectively. The interfering effects of various cations and anions were also studied, and use of suitable masking agents enhances the selectivity of the method. The proposed method is rapid, reproducible and successfully applied for the determination of copper(II) in binary and synthetic mixtures, alloys, pharmaceutical formulations, environmental and fertilizer samples. Comparison of the results with those obtained using an atomic absorption spectrophotometer also tested the validity of the method.