Photoluminescence properties of Sr1-xSi2O2N2: Eux as green to yellow-emitting phosphor for blue pumped white LEDs

This study evaluated potential applications of green to yellow-emitting phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) in blue pumped white light emitting diodes. Sr_1-xSi₂O₂N₂: Eu²⁺_x was synthesized at different Eu²⁺ doping concentrations at 1450 °C for 5 h under a reducing nitrogen atmosphere containing 5% H₂ using a conventional solid reaction method. The X-ray diffraction patterns of the prepared phosphor (Sr_1-xSi₂O₂N₂: Eu²⁺_x) were indexed to the SrSi₂O₂N₂ phase and an unknown intermediate phase. The photoluminescence properties of these phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) showed that the samples were excited from the UV to visible region due to the strong crystal field splitting of the Eu²⁺ ion. The emission spectra under excitation of 450 nm showed a bright color at 545-561 nm. The emission intensity increased gradually with increasing Eu²⁺ doping concentration ratio from 0.05 to 0.15. However, the emission intensity decreased suddenly when the Eu²⁺ concentration ratio was >0.2. As the doping concentration of Eu²⁺ was increased, there was a red shift in the continuous emission peak. These results suggest that Sr_1-xSi₂O₂N₂: Eu₂⁺_x phosphor can be used in blue-pumped white light emitting diodes.     

Investigation of the solid solution series 2(MnX)-CuInX2 (X=S, Se)

(2MnX)_x(CuInX₂)_1−x with X=S and Se were prepared by solid state reaction from the end members α-MnS, β-MnS and CuInS₂ in the range 0<x≤0.2 (≤0.6 for β-MnS) as well as MnSe and CuInSe₂ in the range 0<x≤0.1. Mixed crystals with 0≤x≤0.1 crystallize in the tetragonal chalcopyrite type structure, (2α-MnS)_x(CuInS₂)_1−x samples with 0.1<x≤0.2 and (2β-MnS)_x(CuInS₂)_1−x samples up to x=0.6 consist of two phases, occuring as tetragonal domains (x∼0.1 for X=S) within a cubic matrix with zinc-blende type structure (x∼0.4 for X=S), indicating a miscibility gap. For tetragonal single phase samples the band gap energy, the lattice constants and the anion parameter have been determined. The first and the latter ones show a different composition dependent behaviour caused by the modification of the MnS (α-MnS with NaCl type structure, β-MnS with zinc-blende type structure) used during the synthesis. Additionally a CuMn_xIn_1−xS₂ powder sample, in which Mn substitutes the M^III site, was investigated. The SQUID measurements revealed a well-distinct magnetic transition between 15 and 16 K as well as ferromagnetic-like hysteresis loops pronounced for temperatures below the transition temperature. Below this temperature a clear splitting between the zero field cooling (ZFC) and the field cooling (FC) curves indicate to the existence of a long-range magnetic ordering phenomenon. This behaviour was not found in the other samples were Mn substitutes both sites M^I as well as M^III.     

Effects of preheating on diaspore: Modifications in colour centres, structure and light emission

The thermal properties and thermal stability of diaspore-corundum (AlOOH-Al₂O₃), from Goian (Pontevedra, Spain) were studied by means of differential thermal analysis (DTA), thermogravimetry (TG), high temperature X-ray diffraction (HTXRD) and thermally stimulated luminescence (TL) techniques. The samples were annealed to link the combined effect of (i) dehydroxylation, (ii) oxidation-reduction of chromophores (Mn 0.5%, Fe₂O₃ 0.12%, TiO₂ 0.021% and Cr 80 ppm) determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and (iii) phase transitions whilst sample heating (i.e. α-AlOOH→α′-Al₂P₃→α-Al₂O₃). The blue colour of diaspore, attributed to the Ti⁴⁺-Fe²⁺ intervalence-charge-transfer mechanism, turns to white (circa 500 °C) in good agreement with the DTA endothermic peak (dehydroxylation). The coexistence of α-AlOOH and α′-Al₂P₃ phases has been detected by in situ HTXRD and could be correlated to the thermoluminescence tests performed on preheated aliquots (up to 500 °C).     

Crystal structure and cation distribution in the solid solution series 2(ZnX)-CuInX2 (X=S, Se, Te)

The solid solution series (2ZnX)_x (CuInX₂)_1−x (X=S, Se, Te) were studied by the combination of laboratory and synchrotron X-ray and by neutron powder diffraction. Within the homologous series the tetragonal distortion ¼-u increases in the sequence S→Se→Te whereas the tetragonal deformation η=c/2a decreases. Besides that, with increasing 2ZnX content in CuInX₂ the anion position parameter u increases as expected. The cation site occupancy in the chalcopyrite type phase of single phase tetragonal samples was obtained by Rietveld analysis of the neutron diffraction data. A non-statistic Zn distribution could be deduced for all three systems. The high temperature in situ diffraction experiments with synchrotron radiation on CuInX₂ powder samples revealed the Cu-In anti-site occupation as the driving force of the temperature dependent phase transition from the chalcopyrite to the zinc-blende type structure.     

Hydrothermal synthesis and structural characterization of (1−x)α-Fe2O3-xSnO2 nanoparticles

Structural and morphological characteristics of (1−x)α-Fe₂O₃-xSnO₂ (x=0.0-1.0) nanoparticles obtained under hydrothermal conditions have been investigated by X-ray diffraction (XRD), transmission Mössbauer spectroscopy, scanning and transmission electron microscopy as well as energy dispersive X-ray analysis. On the basis of the Rietveld structure refinements of the XRD spectra at low tin concentrations, it was found that Sn⁴⁺ ions partially substitute for Fe³⁺ at the octahedral sites and also occupy the interstitial octahedral sites which are vacant in α-Fe₂O₃ corundum structure. A phase separation of α-Fe₂O₃ and SnO₂ was observed for x≥0.4: the α-Fe₂O₃ structure containing tin decreases simultaneously with the increase of the SnO₂ phase containing substitutional iron ions. The mean particle dimension decreases from 70 to 6 nm, as the molar fraction x increases up to x=1.0. The estimated solubility limits in the nanoparticle system (1−x)α-Fe₂O₃-xSnO₂ synthesized under hydrothermal conditions are: x≤0.2 for Sn⁴⁺ in α-Fe₂O₃ and x≥0.7 for Fe³⁺ in SnO₂.     

Effect of Bi-doping and Mg-excess on the thermoelectric properties of Mg2Si materials

In this work, Bi-doped magnesium silicide compounds were prepared by applying a combination of both, short-time ball milling and heating treatment. The effect of Mg excess was also studied, aiming towards further improvement in thermoelectric properties. The structural modifications of all materials were followed by Powder X-ray diffraction and Scanning Electron Microscopy. Highly dense pellets of Mg₂Si_1−xBi_x (0≤x≤0.035) and Mg_2+δSi_0.975Bi_0.025 (δ=0.04, 0.06 and 0.12) were fabricated via hot pressing and studied in terms of Seebeck coefficient, electrical and thermal conductivities and free carrier concentration. Their thermoelectric performance, at high temperature range, is presented and the maximum value of the dimensionless-figure-of-merit (ZT) is found to be 0.68 at 810 K, for Mg₂Si_0.97Bi_0.03.     

Structural and electrical study of Ce-substituted bismuth vanadate

Samples of Ce^IV-substituted bismuth vanadate, formulated as Bi₄Ce_xV_2−xO_{11−(x/2)−δ}; 0≤x≤0.30, were synthesized by solid-state reactions. The phase structure and electrical conductivity were investigated using X-ray powder diffraction, FT-IR, differential thermal analysis and AC impedance spectroscopy. For a low composition range, two phase transitions, α↔β and β↔γ, were exhibited in which the system mimics in most events the parent compound. Impedance analysis evidenced no relationship between the blocking effect of charge carriers and structural changes at ambient temperatures. However, the temperature dependence of conductivity was correlated with the stability region of various phases within the system.     

Reactivity and XAFS study on (1−x)CeO2-xNiO (x=0.025-0.3) system in the two-step water-splitting reaction for solar H2 production

The redox reaction of Ce⁴⁺-Ce³⁺ promoted by the catalytic function of nickel ions in a (1−x)CeO₂-xNiO solid solution was investigated for solar H₂ production by the two-step water-splitting reaction. By irradiation using an infrared imaging lamp as a solar simulator, the O₂-releasing reaction with (1−x)CeO₂-xNiO solid solution proceeded at 1673-1873 K, and its reduced form was produced. The amounts of H₂ gas evolved by the reduced form were 1.2-2.5 cm³/g and the evolved gases amounts ratio of H₂/O₂ was nearly 2, which is equal to the stoichiometric value of the water-splitting reaction (H₂O=H₂+1/2O₂). The maximum amounts of evolved H₂ and O₂ gases were obtained at the Ce:Ni mole ratio of 0.95:0.05 (x=0.05) in the (1−x)CeO₂-xNiO system. The X-ray absorption fine structure (XAFS) measurement showed that the O₂-releasing and H₂-generation reactions with (1−x)CeO₂-xNiO solid solution were repeatable with the redox system of Ce⁴⁺-Ce³⁺, which was enhanced by the catalytic function of Ni²⁺-Ni⁰.     

Phase evolution and microwave dielectric properties of Bi3SbO7 ceramic

The Bi₃SbO₇ ceramic was prepared by the solid state reaction method and its phase evolution at different temperatures was studied. Low temperature phase α-Bi₃SbO₇ was formed at about 890 °C and it started to transform to high temperature phase β-Bi₃SbO₇ at about 960 °C. Microwave dielectric constants of α-Bi₃SbO₇ ceramic and β-Bi₃SbO₇ ceramic were 43.2 and 37.6, Qf value were 2080 and 5080 GHz, respectively. TCF of α-Bi₃SbO₇ ceramic was near zero and TCF of β-Bi₃SbO₇ ceramic was about −120 ppm/°C. The Bi₃SbO₇ ceramic is a promising candidate for low temperature co-fired ceramic (LTCC) technology due to its large dielectric constant, low dielectric loss at microwave region, low sintering temperature and simple composition.     

In situ investigation of the formation of Cu(In,Ga)Se2 from selenised metallic precursors by X-ray diffraction—The impact of Gallium, Sodium and Selenium excess

The chemical reactions during rapid thermal processing of stacked elemental layers were investigated by angle-dispersive in situ X-ray diffraction. With a time resolution of 5 diffractograms per minute four different solid state reactions resulting in ternary chalcopyrites were identified: (A) CuSe+InSe→CuInSe₂, (B) Cu₂Se+2InSe+Se→2CuInSe₂, (C) Cu₂Se+In2Se₃→2CuInSe₂, (D) Cu₂Se+Ga2Se₃→2CuGaSe₂. All these reactions form pure tenary chalcopyrites. The reaction resulting in the mixed crystal Cu(In,Ga)Se₂ starts not before (B) has begun. The reaction speed of (A) and the fraction of CuInSe₂ formed by (B) depend on Na-doping and Se-pressure, (C) takes place only, if the reaction paths (A) and (B) are suppressed. Reaction (D) is observed only, if 25% In is replaced by Ga in the precursor. The diffractograms were evaluated by Rietveld refinement to give the phase contents of the samples as a function of reaction time.     

Selected properties of EuCo2(Si1−xGex)2 alloys

EuCo₂(Si_1−xGe_x)₂, x=0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1 samples were synthesised by induction melting followed by annealing at 900 °C and rapid quenching. X-ray powder diffraction and Auger electron spectroscopy studies revealed that solid solutions are formed only for x?0.2 and x?0.7. Magnetic susceptibility investigations for the solid solutions revealed a dominant divalent europium valence state in the germanium-rich samples and a dominant trivalent europium component in the silicon-rich samples. In the germanium-rich samples, a long-range antiferromagnetic ordering was observed. In all samples studied, additional magnetic transitions at various temperatures were detected, which could be attributed to small clusters containing different europium chemical surrounding from that in the predominant phase.     

Annealing of thin Zr films on Si1−xGex(0≤x≤1): X-ray diffraction and Raman studies

X-ray diffraction experiments have been combined with Raman scattering and transmission electron microscopy data to analyze the result of rapid thermal annealing (RTA) applied to Zr films, 16 or 80 nm thick, sputtered on Si_1−xGe_x epilayers (0≤x≤1). The C49 Zr(Si_1−xGe_x)₂ is the unique phase obtained after complete reaction. ZrSi_1−xGe_x is formed as an intermediate phase. The C49 formation temperature T_f is lowered by the addition of Ge in the structure. Above a critical Ge composition close to x=0.33, a film microstructure change was observed. Films annealed at temperatures close to T_f are continuous and relaxed. Annealing at T>T_f leads to discontinuous films: surface roughening resulting from SiGe diffusion at film grain boundaries occurred. Grains are ultimately partially embedded in a SiGe matrix. A reduction in the lattice parameters as well as a shift of Raman lines are observed as T exceeds T_f. Both Ge non-stoichiometry and residual stress have been considered as possible origins for these changes. However, as Ge segregation has never been detected, even by using very efficient techniques, it is thought that the changes originate merely from residual stress. The C49 grains are expected to be strained under the SiGe matrix effect and shift of the Raman lines would indicate the stress is compressive. Some simple evaluations of the stress values indicate that it varies between −0.3 and −3.5 GPa for 0≤x≤1 which corresponds to a strain in the range (−0.11, −1.15%). X-ray and Raman determinations are in good agreement.     

Percolation picture for long wavelength phonons in zinc blende alloys: application to GaInAs

We propose a ‘one bond→two modes’ model for the long wavelength optical phonons in random zinc-blende A_xB_1−xC ternary alloys, based on the percolation site theory. Our model takes into account the ‘fractal→normal’ object transition, which goes with the ‘dispersion→continuum’ topology transition at the percolation thresholds of the A-C and B-C bonds. We first introduce the basics of our model in the case of Zn_1−xBe_x(Se,Te) mixed crystals, whose parent binaries display a high contrast in the bond stiffness, which enhances the percolation effects. We then focus our study on standard systems, which display a much weaker contrast in the bond stiffness. The multi-phonon behavior of GaInAs alloys is re-examined in the light of the percolation model, with much success.     

Microwave solid synthesis and electrical properties of Aurivillius-type oxide-ion conductor

A new oxide-ion conductor of Aurivillius-type structure, namely BISRVOX (Bi₂Sr_xV_1−xO_{5.5-(3x/2)-δ}, 0≤x≤0.20), was successively synthesized by the microwave-assisted solid state reaction. 25 min of microwave irradiation was found to be quite sufficient to ensure the completion of reaction. Powder X-ray diffraction and differential thermal analysis showed better structural properties for the microwave-prepared samples compared to those obtained from the conventional solid synthesis route. Interestingly, the highly conducting γ-phase was effectively stabilized for x≥0.10. AC impedance spectroscopy evidenced the superiority of the microwave heating over conventional solid synthesis routes in exhibiting high oxide-ion performance.     

Investigations of meta-stable and post-spinel silicon nitrides

Since the discovery of post-spinel Si₃N₄, its fundamental physical properties are highly required. In this paper, theoretical calculations are performed to investigate the structural and elastic properties of the β-, γ-, wII- and post-spinel Si₃N₄ polymorphs. The calculated ground-state properties compare well with available experiments. The phase transformations of the β-, γ-, wII- and post-spinel phases are investigated by the famous plane-wave pseudo-potential density functional theory. From the elastic constants obtained, we find that β-, γ- and wII-Si₃N₄ are stable at 0 GPa and the post-spinel phase is unstable/stable at 0 GPa/160 GPa. When the high-temperature β→γ transformation is bypassed due to kinetic reasons, β-Si₃N₄ is predicted to undergo a first-order phase transition to a new phase (wII-Si₃N₄). It is found that the transition pressures of β→wII and γ→post-spinel transitions are 20.8 GPa and 152.5 GPa, respectively. The phase boundary of the γ→post-spinel transition can be described as P=152.3631−6.39×10⁻³T+2.01062×10⁻⁵T²−1.93962×10⁻⁹T³. Through the quasi-harmonic approximation, the dependences of heat capacity, entropy, thermal expansion coefficient and the Debye temperature on temperature, are also successfully predicted.     

Spinel-type solid solutions involving Mn and Ti:Crystal chemistry, magnetic and electrochemical properties

This study reports the structural and magnetic properties of spinel systems Li₄Mn_5−xTi_xO₁₂ (“4-5-12” series) and LiNi_0.5Mn_1.5−xTi_xO₄ (“LNMTO” series), both based on Mn⁴⁺ substitution by Ti⁴⁺. Intermediate compositions covering the whole range of compositions (0≤x≤5 and 0≤x≤1.5, respectively) were prepared by solid state reaction. The 4-5-12 system forms a continuous spinel solid solution, whereas the spinel phase range in LNMTO stops before the end member “LiNi_0.5Ti_1.5O₄”, which is multi-phased with a major hexagonal phase component. Cell parameters and (Mn,Ti)-O distances increase monotonically with titanium content in both series. In the LNMTO series, the end member LiNi_0.5Mn_1.5O₄ is known to form a superstructure with Ni/Mn cation ordering. Neutron diffraction and Raman spectroscopy show that this order is lost when Ti is substituted, even at low level (x=0.15). The LNMTO crystal chemistry is also complicated by the presence of partial cation inversion, and the presence of a secondary rocksalt-type phase that modifies the spinel stoichiometry. Magnetic properties are characterized by a competition between ferromagnetic and antiferromagnetic interactions; no magnetic ordering is achieved, in agreement with B-site cation frustration and disorder. Electrochemical measurements show that the Ti^3+/4+ and Mn^3+/4+ redox couples behave independently in the 4-5-12 series, and that titanium decreases the high-potential electrochemical redox activity of LNMTO because of its blocking character for electron transfer to and from the nickel sites in the spinel structure.     

Preparation, characterization and luminescence properties of porous Si3N4 ceramics with Eu2O3 as sintering additive

Porous Si₃N₄ ceramics with photoluminescence properties were prepared by pressureless sintering using α-Si₃N₄ powder as raw material and Eu₂O₃ as sintering additive. Chemical composition, phase formation, microstructure and photoluminescence properties of porous Si₃N₄ ceramics were studied by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence measurements (PL/PLE). The results show that single Eu₂O₃ additive promotes α→β transformation but not significant densification. A broad band emission center at 570 nm assigned to Eu²⁺ is observed, Eu³⁺ in Eu₂O₃ is (partially) converted to Eu²⁺ by reaction with Si₃N₄, which results in a lower β aspect ratio and β-content compared to the other Ln (Ln=lanthanide) oxide additives.     

Structural,optical and dielectric properties of Ni substituted NdFeO3

Present study reports the structural, optical and dielectric properties of Ni substituted NdFe_1−xNi_xO₃ (0 ≤ x ≤ 0.5) compounds prepared through the ceramic method. X-ray diffraction (XRD) confirmed an orthorhombic crystal structure of all the samples. Both unit cell volume and grain size were found to decrease with an increase in Ni concentration. Morphological study by Scanning electron microscope (SEM) shows less porosity with Ni substitution in present system. From UV–vis spectroscopy, the optical band gap was found to increase with Ni doping. This observed behavior was explained on the basis of reduction in crystallite size, unit cell volume and its impact on the crystal field potential of the system after Ni substitution. The dielectric properties (?′ and tanδ) as a function of frequency or temperature, and the ac electrical conductivity (σ_ac) as a function of frequency have been studied. Hopping of charge carriers between Fe²⁺ → Fe³⁺ ions and Ni²⁺ → Ni³⁺ ions are held responsible for both electrical and dielectric dispersion in the system. Wide optical band gap and a very high dielectric constant of these materials promote them to be a suitable candidate for memory based devices in electronic industry.     

Study of the CO2 decomposition over doped Ni-ferrites

The H₂ reduced NiFe_2−xCr_xO₄ can be used to decompose CO₂ to C repeatedly. A series of nanocrystalline Ni-ferrite doping different contents of Cr³⁺ were synthesized by mixed ions co-precipitation method and characterized by XRD, BET and TEM. The results showed that their crystallite sizes were 1-2 nm and BET surface area changed from 220 to 285 m²/g. The evaluation of the activity and stability indicated that Ni-ferrite with 4 wt% Cr³⁺ dopant could be used repeatedly as many as 60 times and was transformed to Fe_yNi_1−y (0<y<1) alloy and Fe₅C₂ gradually during the cycle decomposition of CO₂ to carbon, especially for no Cr³⁺ sample. After the 60th reaction, although NiFe₂O₄ phase just remained 2.1 wt%, the decomposition activity of Ni-ferrite with 4 wt% Cr³⁺ was still 60% of initial activity. This fact suggests that nanocrystalline Fe_yNi_1−y (0<y<1) alloy from the cycle reaction can contribute to the decomposition of CO₂. The results from scanning electron microscopy (SEM), TEM and XRD show that the deposited carbon from CO₂ decomposition consisted of amorphous, crystallite and carbon nanotubes.     

α-Fe2O3-In2O3 mixed oxide nanoparticles synthesized under hydrothermal supercritical conditions

α-Fe₂O₃-In₂O₃ mixed oxide nanoparticles system has been synthesized by hydrothermal supercritical and postannealing route, starting with (1−x)Fe(NO₃)₃·9H₂O·xIn(NO₃)₃·5H₂O aqueous solution (x=0-1). X-ray diffraction and Mössbauer spectroscopy have been used to study the phase structure and substitutions in the nanosized samples. The concentration regions for the existence of the solid solutions in the α-Fe₂O₃-In₂O₃ nanoparticle system together with the solubility limits of In³⁺ ions in the hematite lattice and of Fe³⁺ ions in the cubic In₂O₃ structure have been evidenced. In general, the substitution level is considerably lower than the nominal concentration x. A justification of the processes leading to the formation of iron and indium phases in the investigated supercritical hydrothermal system has been given.