1,8‐Naphthalimide‐Substituted BODIPY Dyads: Synthesis,Structure, Properties,and Live‐Cell Imaging

A set of 1,8‐naphthalimide (NPI)‐substituted 4,4‐difluoroboradiaza‐s‐indacene (BODIPY) dyads 1 a – 1 c were designed and synthesized by the Pd‐catalyzed Sonogashira cross‐coupling reaction of ethynyl substituted NPI 1 with the meso‐, β‐, and α‐halogenated BODIPYs a , b , and c , respectively. The BODIPY 1 c exhibits redshifted absorption, which suggests better electronic communication with substitution at the α‐position of BODIPY compared with at the meso and β positions, which was further supported by time‐dependent DFT calculations. The optical band gap follows the order 1 a > 1 b > 1 c . The single‐crystal X‐ray structures of dyads 1 a – 1 c are reported, which reflect planar orientations of the BODIPY units with respect to the NPIs. The DFT‐optimized structures show good correlation with the experimental data obtained from the single‐crystal X‐ray structures. The packing diagram of 1 a shows a sheet‐like arrangement, 1 b forms a ladder‐like structural motif, and 1 c forms a complex 3D structural arrangement. The dyads 1 a – 1 c show low cytotoxicity (IC₅₀>100 μm ). The confocal microscopy studies with HeLa and A375 cells (when treated with dyads 1 a – 1 c ) show that all the dyads easily enter the cell membrane and show significant multicolor intracellular fluorescence covering the entire visible range with clear emissions in blue, green, and red channels.     

Towards meso‐Ester BODIPYs with Aggregation‐Induced Emission Properties: The Effect of Substitution Positions

Three meso‐ester boron dipyrromethene (BODIPY) dyes have been synthesized and functionalized with aggregation‐induced emission (AIE)‐active tetraphenylethene or triphenylethene moieties. It was found that functionalizing at the different positions of the BODIPY core resulted in the final dye having different emission properties in response to aggregation: from aggregation‐induced quenching (ACQ) to being AIE active. X‐ray crystallographic analysis was thus performed to provide an explanation for these differences.     

Insights into the AIEE of 1,8‐Naphthalimides (NPIs): Inverse Effects of Intermolecular Interactions in Solution and Aggregates

Systematic structural perturbation has been used to fine‐tune and understand the luminescence properties of three new 1,8‐naphthalimides (NPIs) in solution and aggregates. The NPIs show blue emission in the solution state and their fluorescence quantum yields are dependent upon their molecular rigidity. In concentrated solutions of the NPIs, intermolecular interactions were found to quench the fluorescence due to the formation of excimers. In contrast, upon aggregation (in THF / H₂O mixtures), the NPIs show aggregation‐induced emission enhancement (AIEE). The NPIs also show moderately high solid‐state emission quantum yields (ca. 10–12.7 %). The AIEE behaviour of the NPIs depends on their molecular rigidity and the nature of their intermolecular interactions. The NPIs 1 – 3 show different extents of intermolecular (π–π and C?H???O) interactions in their solid‐state crystal structures depending on their substituents. Detailed photophysical, computational and structural investigations suggest that an optimal balance of structural flexibility and intermolecular communication is necessary for achieving AIEE characteristics in these NPIs.     

Piezofluorochromic and Aggregation‐Induced‐Emission Compounds Containing Triphenylethylene and Tetraphenylethylene Moieties

New fluorescent compounds containing triphenylethylene and tetraphenylethylene moieties were synthesized, and their piezofluorochromic and aggregation‐induced emission behaviors were investigated. The results show that all compounds exhibit aggregation‐induced emission characteristics and only the crystalline compound possesses piezofluorochromic properties. The color, emission spectra, and morphological structures of the one piezofluorochromic compound exhibit reversibility upon grinding and annealing (or fuming) treatments. The piezofluorochromic behaviors are caused by a change between different modes of solid state molecular packing under external pressure. The single crystal X‐ray diffraction analysis reveals that the twisted conformation of the aggregation‐induced emission compound leads to the formation of metastable crystal lattice with cavity which is readily destroyed under external pressure. A possible mechanism of piezofluorochromic phenomenon has been proposed.     

Benzo[c,d]indole‐Containing Aza‐BODIPY Dyes: Asymmetrization‐Induced Solid‐State Emission and Aggregation‐Induced Emission Enhancement as New Properties of a Well‐Known Chromophore

A series of symmetric and asymmetric benzo[c,d]indole‐containing aza boron dipyrromethene (aza‐BODIPY) compounds was synthesized by a titanium tetrachloride‐mediated Schiff‐base formation reaction of commercially available benzo[c,d]indole‐2(1H)‐one and heteroaromatic amines. These aza‐BODIPY analogues show different electronic structures from those of regular aza‐BODIPYs, with hypsochromic shifts of the main absorption compared to their BODIPY counterparts. In addition to the intense fluorescence in solution, asymmetric compounds exhibited solid‐state fluorescence due to significant contribution of the vibronic bands to both absorption and fluorescence as well as reduced fluorescence quenching in the aggregates. Finally, aggregation‐induced emission enhancement, which is rare in BODIPY chromophores, was achieved by introducing a nonconjugated moiety into the core structure.     

Anthracene Modified by Aldehyde Groups Exhibiting Aggregation‐Induced Emission Properties

In order to get an easy way to achieve the transformation from aggregation‐caused quenching luminophores (ACQphores) to aggregation‐induced emission luminogens (AIEgens), we took aldehyde groups as the modifying group to decorate anthracene. The fluorescence performances of 9‐anthraldehyde (AnA) and 9,10‐anthracenedicarboxaldehyde (AnDA) in solution and aggregated state were studied. We found out that the aldehyde group can transform anthracene with aggregation‐caused quenching properties to AIEgen. The single‐crystal structures analysis of AnA and AnDA showed that their structure characteristics are responsible for the AIE properties of AnA and AnDA. On one hand, the aldehyde group can cause steric effects to lower intermolecular π‐π packing style in aggregated state. On the other hand, intermolecular H‐bonding interactions can restrict the intramolecular rotation and suppress internal charge transfer. These results may supply a new simple method for the transformation from ACQphores to AIEgens on the point of the molecular design.     

Color‐Tunable Solid‐State Fluorescence Emission from Carbazole‐Based BODIPYs

Several carbazole‐based boron dipyrromethene (BODIPY) dyes were synthesized by organometallic approaches. Thiazole, benzothiazole, imidazole, benzimidazole, triazole, and indolone substituents were introduced at the 1‐position of the carbazole moiety, and boron complexation of each dipyrrin generated the corresponding compounds 1 , 2 a , and 3 – 6 . The properties of these products were investigated by UV/Vis and fluorescence spectroscopy, cyclic voltammetry, X‐ray crystallography, and DFT calculations. These compounds exhibited large Stokes shifts, and compounds 1 , 2 a , and 3 – 5 fluoresced both in solution and in the solid state. Complex 2 a showed the highest fluorescence quantum yield (Φ_F) in the solid state, therefore boron complexes of the carbazole–benzothiazole hybrids 2 b – f , which had several different substituents, were prepared and the effects of the substituents on the photophysical properties of the compounds were examined. The fluorescence properties showed good correlation with the results of crystal‐packing analyses, and the dyes exhibited color‐tunable solid‐state fluorescence.     

Aggregation‐Induced Emission and Sensing Characteristics of Triarylborane–Oligothiophene–Dicyanovinyl Triads

The design, synthesis and aggregation‐induced emission properties of a new series of triarylborane–oligothiophene–dicyanovinyl (DCV) conjugates 4 – 6 (A–D–A’ type molecular configuration) are reported. The optical properties of 4 – 6 can be modulated by judiciously varying the number of thiophene units between electron deficient boryl and dicyanovinyl units. Compound 6 with terthiophene spacer showed highly red‐shifted absorption and emission compared to 5 and 4 with bithiophene and monothiophene spacers, respectively. Compounds 5 and 6 show aggregation‐induced emission enhancement in water/THF mixtures. Compounds 5 and 6 also showed solvent viscosity dependent emission characteristics. All the three compounds show distinct optical responses for small anions such as fluoride and cyanide. Filter paper strips coated with compounds 5 and 6 can detect F^? and CN^? in aqueous media with different colorimetric responses.     

Time‐Dependent Aggregation‐Induced Enhanced Emission,Absorption Spectral Broadening,and Aggregation Morphology of a Novel Perylene Derivative with a Large D–π–A Structure

Strong aggregation‐caused quenching of perylene diimides (PDI) is changed successfully by simple chemical modification with two quinoline moieties through C?C at the bay positions to obtain aggregation‐induced enhanced emission (AIEE) of a perylene derivative ( Cya‐PDI ) with a large π‐conjugation system. Cya‐PDI is weakly luminescent in the well‐dispersed CH₃CN or THF solutions and exhibits an evident time‐dependent AIEE and absorption spectra broadening in the aggregated state. In addition, morphological inspection demonstrates that the morphology of the aggregated form of Cya‐PDI molecules changed from plate‐shaped to rod‐like aggregates under the co‐effects of time and water. An edge‐to‐face arrangement of aggregation was proposed and discussed. The fact that the Cya‐PDI aggregates show a broad absorption covering the whole visible‐light range and strong intermolecular interaction through π–π stacking in the solid state makes them promising materials for optoelectric applications.     

Coordination‐Driven Self‐Assembly of Carbazole‐Based Metallodendrimers with Generation‐Dependent Aggregation‐Induced Emission Behavior

A new family of 120° carbazole‐based dendritic donors D1 – D3 have been successfully designed and synthesized, from which a series of novel supramolecular carbazole‐based metallodendrimers with well‐defined shapes and sizes were successfully prepared by [2+2] and [3+3] coordination‐driven self‐assembly. The structures of newly designed rhomboidal and hexagonal metallodendrimers were characterized by multinuclear NMR (¹H and ³¹P) spectroscopy, ESI‐TOF mass spectrometry, FTIR spectroscopy, and the PM6 semiempirical molecular orbital method. The fluorescence emission behavior of ligands D1 – D3 , rhomboidal metallodendrimers R1 – R3 , and hexagonal metallodendrimers H1 – H3 in mixtures of dichloromethane and n‐hexane with different n‐hexane fractions were investigated. The results indicated that D1 – D3 featured typical aggregation‐induced emission (AIE) properties. However, different from ligands D1 – D3 , metallodendrimers R1 – R3 and H1 – H3 presented interesting generation‐dependent AIE properties. Furthermore, evidence for the aggregation of these metallodendrimers was confirmed by a detailed investigation of dynamic light‐scattering, Tyndall effect, and SEM. This research not only provides a highly efficient strategy for constructing carbazole‐based dendrimers with well‐defined shapes and sizes, but also presents a new family of carbazole‐based dendritic ligands and rhomboidal and hexagonal metallodendrimers with interesting AIE properties.     

Synthesis and Fluorescent Properties of Tetra‐Biphenyl N‐Substituted Phthalimides

A series of tetra(biphenyl‐4‐yl)phthalimide (TBPPI ) derivatives with different N‐substituents (n‐butyl, phenyl, p‐methyl phenyl, and p‐acetyl phenyl moieties for compounds 7 – 10 , respectively) were prepared to examine their fluorescent behavior under various conditions. The chemical structure of compound 7 has been successfully confirmed by single crystal X‐ray diffraction analysis. The photoluminescence (PL ) spectra in different ratios of CH ₂Cl ₂/EtOH mixture solutions revealed that compounds 7 and 8 exhibited both aggregation‐induced emission (AIE ) and aggregation‐caused quenching (ACQ ) behaviors, while compounds 9 and 10 displayed AIE and aggregation‐induced emission enhancement (AIEE ) properties, respectively.     

Panchromatic Light Capture and Efficient Excitation Transfer Leading to Near‐IR Emission of BODIPY Oligomers

All‐BODIPY‐based (BODIPY=boron‐dipyrromethene) donor–acceptor systems capable of wide‐band absorbance leading to efficient energy transfer in the near‐IR region are reported. A covalently linked 3‐pyrrolyl BODIPY–BODIPY dimer building block bearing an ethynyl group at the meso‐aryl position is synthesized and coupled with three different monomeric BODIPY/pyrrolyl BODIPY building blocks with a bromo/iodo group under Pd⁰ coupling conditions to obtain three covalently linked 3‐pyrrolyl‐BODIPY‐based donor–acceptor oligomers in 19–29 % yield. The oligomers are characterized in detail by 1D and 2D NMR spectroscopy, high‐resolution mass spectrometry, and optical spectroscopy. Due to the presence of different functionalized BODIPY derivatives in the oligomers, panchromatic light capture (300–725 nm) is witnessed. Fluorescence studies reveal singlet–singlet energy transfer from BODIPY monomer to BODIPY dimer leading to emission in the 700–800 nm range. Theoretical modeling according to the Förster mechanism predicts ultrafast energy transfer due to good spectral overlap of the donor and acceptor entities. Femtosecond transient absorption studies confirm this to be the case and thus show the relevance of the currently developed all‐BODIPY‐based energy‐funneling supramolecular sytems with near‐IR emission to solar‐energy harvesting applications.     

Unraveling Dual Aggregation‐Induced Emission Behavior in Steric‐Hindrance Photochromic System for Super Resolution Imaging

Unprecedented dual aggregation‐induced emission (AIE) behavior based on a steric‐hindrance photochromic system is presented, with incorporation one or two bulky aryl groups, resulting in different flexibleness. The dual AIE behavior of open and closed isomers can be explained by restriction of intramolecular rotation (RIR), restriction of intramolecular vibration (RIV), and intermolecular stacking. The large bulky benzothiophene causes restricted rotation, enhancing the emission of open form in solution and weak π–π molecular packing, thereby efficiently enhancing the luminescence performance in the solid state. With incorporation of two large bulky benzothiophene groups, BBTE possesses the most outstanding AIE activity, undergoing highly efficient and reversible off‐to‐on fluorescence in film upon alternating UV and visible light irradiation along with excellent fatigue resistance. The off‐to‐on fluorescent photoswitch is successfully established in super resolution imaging.     

BODIPY‐Based Oligo(ethylene glycol) Dendrons as Fluorescence Thermometers: When Thermoresponsiveness Meets Intramolecular Electron/Charge Transfer

The temperature‐dependent photophysical properties of a series of 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) derivatives with different oligo(ethylene glycol) (OEG) dendrons were investigated. Weak fluorescence emission was observed for these BODIPY derivatives in dilute solution with low viscosity. BDP‐G0 and BDP‐G1‐TEG exhibit a high quantum yield in viscous glycerol solutions, contrary to the moderate and little fluorescence enhancement for BDP‐G1 and BDP‐G2 under the same conditions. The photoinduced electron transfer (PET) may have quenched the fluorescence, as supported by calculation. Interestingly, the thermoresponsive BODIPY derivatives show heat‐induced luminescence enhancement with a high signal‐to‐noise ratio and their emission maxima are dependent on the structures of branched tri(ethylene glycol) moieties. Finally, preliminary studies on the BODIPY derivatives as intracellular fluorescence indicators in living HeLa cells were carried out.     

Synthesis,photoluminescence, and electroluminescence characterization of double tetraphenylethene‐tethered BODIPY luminogens

Three double tetraphenylethene (TPE)‐tethered 4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indance (BODIPY) fluorophores, 35TPEBODP , 88TPEBODP , and 26TPEBODP , have been synthesized and characterized. The green 35TPEBODP with deep red fluorescence shows serious thermal decomposition in the purification process of sublimation, which prohibits its test for an organic light‐emitting diode (OLED) fabricated by the vacuum–thermal evaporation process. The tethered TPE is attached to BODIPY at three different positions, resulting in different photoluminescence (emission wavelength and quantum yield) and electroluminescence (EL). Different from TPE‐tethered BODIPY fluorophores reported in literature, none of the BODIPY fluorophores studied here exhibits aggregation‐induced emission (AIE), aggregation‐induced enhanced emission (AIEE), or twisted intramolecular charge transfer (TICT) characteristics. Although solution (10^?5 M THF) photoluminescence quantum yields (?s) are relatively high at 78%, 68%, and 86% for 35TPEBODP , 88TPEBODP , and 26TPEBODP , respectively, which are all higher than 41% of PhBODP (a non‐TPE‐tethered BODIPY), the ? is significantly decreased to 1–6% in 5 wt% dopant polystyrene thin film or as a solid powder, except for 13% of 26TPEBODP . Therefore, due to the low ? of dopant thin film or solid powder, either dopant or nondopant OLEDs exhibit inferior external quantum efficiency (EQE) and intensity of EL. The best OLED in this study is the 26TPEBODP device, and its EQE reaches 1.3%, and the highest EL intensity is approximately 1,600 cd/m².     

Tuning the Photophysical Properties of BODIPY Molecules by π‐Conjugation with Fischer Carbene Complexes

The synthesis, structure, and photophysical properties of novel BODIPY–Fischer alkoxy‐, thio‐, and aminocarbene dyads are reported. The BODIPY chromophore is directly attached to the carbene ligand by an ethylenic spacer, thus forming donor–bridge–acceptor π‐extended systems. The extension of the π‐conjugation is decisive in the equilibrium geometries of the dyads and is clearly reflected in the corresponding absorption and emission spectra. Whereas the BODIPY fragment is mainly isolated in aminocarbene complexes, it is fully conjugated in alkoxycarbene derivatives. The former thus exhibit the characteristic photophysical properties of BODIPY units, whereas complete suppression of the BODIPY fluorescence emission is observed in the latter, as a direct consequence of the strong electron‐accepting character of the (CO)₅M?C moiety. As the π‐acceptor character of the metal–carbene group can be modified, the electronic properties of the conjugated BODIPY can be tuned. Density functional calculations have been carried out to gain insight into the photophysical properties.     

DMAP‐BODIPY Alkynes: A Convenient Tool for Labeling Biomolecules for Bimodal PET–Optical Imaging

Several new boron dipyrromethene/N,N‐dimethylaminopyridine (BODIPY‐DMAP) assemblies were synthesized as precursors for bimodal imaging probes (optical imaging, OI/positron emission tomography, PET). The photophysical properties of the new compounds were also studied. The first proof‐of‐concept was obtained with the preparation of several new BODIPY‐labeled bombesins and evaluation of the affinity for bombesin receptors by using a competition binding assay. Fluorination reactions were investigated on DMAP‐BODIPY precursors as well as on DMAP‐BODIPY‐labeled bombesins. Chemical modifications on the BODIPY core were also performed to obtain luminescent dyes emitting in the therapeutic window (650–900 nm), suitable for in vivo imaging, making these compounds promising precursors for PET/optical dual‐modality imaging agents.     

meso‐Pyrrole‐Substituted 22‐Oxacorroles: Building Blocks for the Synthesis of BODIPY‐Bridged 22‐Oxacorrole Dyads

Novel boron‐dipyrromethene (BODIPY)‐bridged 22‐oxacorrole dyads, using meso‐pyrrolyl 22‐oxacorrole as a key synthon, have been synthesized. The reactivity of the meso‐pyrrolyl group of 22‐oxacorrole was exploited to synthesize the first examples of BODIPY‐bridged 22‐oxacorrole dyads in ≈40 % yield. The dyads are stable and exhibited interesting spectral and electrochemical properties.     

Synthesis of 3,8‐Dichloro‐6‐ethyl‐1,2,5,7‐tetramethyl–BODIPY from an Asymmetric Dipyrroketone and Reactivity Studies at the 3,5,8‐Positions

The asymmetric BODIPY 1 a (BODIPY=4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene), containing two chloro substituents at the 3,8‐positions and a reactive 5‐methyl group, was synthesized from the asymmetric dipyrroketone 3 , which was readily obtained from available pyrrole 2 a . The reactivity of 3,8‐dichloro‐6‐ethyl‐1,2,5,7‐tetramethyl‐BODIPY 1 a was investigated by using four types of reactions. This versatile BODIPY undergoes regioselective Pd⁰‐catalyzed Stille coupling reactions and/or regioselective nucleophilic addition/elimination reactions, first at the 8‐chloro and then at the 3‐chloro group, using a variety of organostannanes and N‐, O‐, and S‐centered nucleophiles. On the other hand, the more reactive 5‐methyl group undergoes regioselective Knoevenagel condensation with an aryl aldehyde to produce a monostyryl‐BODIPY, and oxidation with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) gives the corresponding 5‐formyl‐BODIPY. Investigation of the reactivity of asymmetric BODIPY 1 a led to the preparation of a variety of functionalized BODIPYs with λ_max of absorption and emission in the ranges 487–587 and 521–617 nm, respectively. The longest absorbing/emitting compound was the monostyryl‐BODIPY 16 , and the largest Stokes shift (49 nm) and fluorescence quantum yield (0.94) were measured for 5‐thienyl‐8‐phenoxy‐BODIPY 15 . The structural properties (including 16 X‐ray structures) of the new series of BODIPYs were investigated.     

meso‐Ester and Carboxylic Acid Substituted BODIPYs with Far‐Red and Near‐Infrared Emission for Bioimaging Applications

A series of meso‐ester‐substituted BODIPY derivatives 1–6 are synthesized and characterized. In particular, dyes functionalized with oligo(ethylene glycol) ether styryl or naphthalene vinylene groups at the α positions of the BODIPY core ( 3 – 6 ) become partially soluble in water, and their absorptions and emissions are located in the far‐red or near‐infrared region. Three synthetic approaches are attempted to access the meso‐carboxylic acid (COOH)‐substituted BODIPYs 7 and 8 from the meso‐ester‐substituted BODIPYs. Two feasible synthetic routes are developed successfully, including one short route with only three steps. The meso‐COOH‐substituted BODIPY 7 is completely soluble in pure water, and its fluorescence maximum reaches around 650 nm with a fluorescence quantum yield of up to 15 %. Time‐dependent density functional theory calculations are conducted to understand the structure–optical properties relationship, and it is revealed that the Stokes shift is dependent mainly on the geometric change from the ground state to the first excited singlet state. Furthermore, cell staining tests demonstrate that the meso‐ester‐substituted BODIPYs ( 1 and 3 – 6 ) and one of the meso‐COOH‐substituted BODIPYs ( 8 ) are very membrane‐permeable. These features make these meso‐ester‐ and meso‐COOH‐substituted BODIPY dyes attractive for bioimaging and biolabeling applications in living cells.