Construction of Three‐Dimensional DNA Hydrogels from Linear Building Blocks

A three‐dimensional DNA hydrogel was generated by self‐assembly of short linear double‐stranded DNA (dsDNA) building blocks equipped with sticky ends. The resulting DNA hydrogel is thermoresponsive and the length of the supramolecular dsDNA structures varies with temperature. The average diffusion coefficients of the supramolecular dsDNA structures formed by self‐assembly were determined by diffusion‐ordered NMR spectroscopy (DOSY NMR) for temperatures higher than 60 °C. Temperature‐dependent rheological measurements revealed a gel point of 42±1 °C. Below this temperature, the resulting material behaved as a true gel of high viscosity with values for the storage modulus G′ being significantly larger than that for the loss modulus G′′. Frequency‐dependent rheological measurements at 20 °C revealed a mesh size (ξ) of 15 nm. AFM analysis of the diluted hydrogel in the dry state showed densely packed structures of entangled chains, which are also expected to contain multiple interlocked rings and catenanes.     

One Ligand in Dual Roles: Self‐Assembly of a Bis‐Rhomboidal‐Shaped,Three‐Dimensional Molecular Wheel

A facile high yield, self‐assembly process that leads to a terpyridine‐based, three‐dimensional, bis‐rhomboidal‐shaped, molecular wheel is reported. The desired coordination‐driven supramolecular wheel involves eight structurally distorted tristerpyridine (tpy) ligands possessing a 60° angle between the adjacent tpy units and twelve Zn²⁺ ions. The tpy ligand plays dual roles in the self‐assembly process: two are staggered at 180° to create the internal hub, while six produce the external rim. The wheel can be readily generated by mixing the tpy ligand and Zn²⁺ in a stoichiometric ratio of 2:3; full characterization is provided by ESI‐MS, NMR spectroscopy, and TEM imaging.     

An Amino‐Acid‐Based Self‐Healing Hydrogel: Modulation of the Self‐Healing Properties by Incorporating Carbon‐Based Nanomaterials

An amino‐acid‐based (11‐(4‐(pyrene‐1‐yl)butanamido)undecanoic acid) self‐repairing hydrogel is reported. The native hydrogel, as well as hybrid hydrogels, have been thoroughly characterized by using various microscopic techniques, including transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman spectroscopy, fluorescence spectroscopy, FTIR spectroscopy, X‐ray diffraction, and by using rheological experiments. The native hydrogel exhibited interesting fluorescence properties, as well as a self‐healing property. Interestingly, the self‐healing, thixotropy, and stiffness of the native hydrogel can be successfully modulated by incorporating carbon‐based nanomaterials, including graphene, pristine single‐walled carbon nanotubes (Pr‐SWCNTs), and both graphene and Pr‐SWCNTs, within the native gel system. The self‐recovery time of the gel was shortened by the inclusion of reduced graphene oxide (RGO), Pr‐SWCNTs, or both RGO and Pr‐SWCNTs. Moreover, hybrid gels that contained RGO and/or Pr‐SWCNTs exhibited interesting semiconducting behavior.     

Synthesis and Self‐Assembly of Novel s‐Tetrazine‐Based Gelator

The design, synthesis and self‐assembly of new symmetrical 3,6‐bis(4‐(3,4,5‐tris(dodecyloxy)benzoate)phenyl)‐1,2,4,5‐tetrazine were described. The novel gelator, sym‐tetrazine, was prepared by addition reaction of 4‐cyanophenol with hydrazine monohydrate followed by oxidation reaction to afford the corresponding 3,6‐bis(4‐hydroxyphenyl)‐1,2,4,5‐tetrazine which was then subjected to esterification reaction with 3,4,5‐tris(dodecyloxy)benzoic acid. The chemical structure of the sym‐tetrazine gelator was confirmed by elemental analysis, fourier‐transform infrared spectroscopy (FT‐IR), and nuclear magnetic resonance (¹H‐ and ¹³C‐NMR) spectral measurements. It was confirmed to exhibit relatively strong gelation ability to produce supramolecular assemblies in several polar alcoholic organic solvents, such as butanol, octanol, and 1,6‐dihydroxyhexane. The π‐π stacking and van der Waals mediated self‐assembly of tetrazine‐based organogelator were studied by scanning electron microscopy images of the xerogel to reveal that the obtained organogel consists of fibrillar aggregates. Investigation of FT‐IR and concentration‐dependent ¹H‐NMR spectra confirm that the intermolecular van der Waals interactions and π‐π stacking were the key driving forces for self‐assembly during gelation process of s‐tetrazine molecules.     

Formation of a Polypseudorotaxane via Self‐Assembly of γ‐Cyclodextrin with Poly(N‐isopropylacrylamide)

A polypseudorotaxane (PPR) comprising γ‐cyclodextrin (γ‐CD) as host molecules and poly(N‐isopropylacrylamide) (PNIPAM) as a guest polymer is prepared via self‐assembly in aqueous solution. Due to the bulky pendant isopropylamide group, PNIPAM exhibits size‐selectivity toward self‐assembly with α‐, β‐, and γ‐CDs. It can fit into the cavity of γ‐CD to give rise to a PPR, but cannot pass through α‐CD and β‐CD under the same conditions. The ratio of the number of γ‐CD molecules to entrapped NIPAM repeat units is kept at 1:2.2 or 1:2.4, determined by ¹H NMR spectroscopy and TGA analysis, respectively, indicating that there are more than 2 but less than 3 NIPAM repeat units included by one γ‐CD molecule. This finding opens new avenues to PPR‐based supramolecular polymers to be used as solid, stimuli‐responsive materials.     

Desymmetrization of 3,3′‐Bis(acylamino)‐2,2′‐bipyridine‐Based Discotics: The High Fidelity of Their Self‐Assembly Behavior in the Liquid‐Crystalline State and in Solution

Two novel nonsymmetrical disc‐shaped molecules 1 and 2 based on 3,3′‐bis(acylamino)‐2,2′‐bipyridine units were synthesized by means of a statistical approach. Discotic 1 possesses six chiral dihydrocitronellyl tails and one peripheral phenyl group, whereas discotic 2 possesses six linear dodecyloxy tails and one peripheral pyridyl group. Preorganization by strong intramolecular hydrogen bonding and subsequent aromatic interactions induce self‐assembly of the discotics. Liquid crystallinity of 1 and 2 was determined with the aid of polarized optical microscopy, differential scanning calorimetry, and X‐ray diffraction. Two columnar rectangular mesophases (Col_r) have been identified, whereas for C₃‐symmetrical derivatives only one Col_r mesophase has been found. 1 In solution, the molecularly dissolved state in chloroform was studied with ¹H NMR spectroscopy, whereas the self‐assembled state in apolar solution was examined with optical spectroscopy. Remarkably, these desymmetrized discotics, which lack one aliphatic wedge, behave similar to the symmetric parent compound. To prove that the stacking behavior of discotics 1 and 2 is similar to that of reported C₃‐symmetrical derivatives, a mixing experiment of chiral 1 with C₃‐symmetrical 13 has been undertaken; it has shown that they indeed belong to one type of self‐assembly. This helical J‐type self‐assembly was further confirmed with UV/Vis and photoluminescence (PL) spectroscopy. Eventually, disc 2 , functionalized with a hydrogen‐bonding acceptor moiety, might perform secondary interactions with molecules such as acids.     

Ultrasound‐Driven Secondary Self‐Assembly of Amphiphilic β‐Cyclodextrin Dimers

The controlled secondary self‐assembly of amphiphilic molecules in solution is theoretically and practically significant in amphiphilic molecular applications. An amphiphilic β‐cyclodextrin (β‐CD) dimer, namely LA‐(CD)₂, has been synthesized, wherein one lithocholic acid (LA) unit is hydrophobic and two β‐CD units are hydrophilic. In an aqueous solution at room temperature, LA‐(CD)₂ self‐assembles into spherical micelles without ultrasonication. The primary micelles dissociates and then secondarily form self‐assemblies with branched structures under ultrasonication. The branched aggregates revert to primary micelles at high temperature. The ultrasound‐driven secondary self‐assembly is confirmed by transmission electron microscopy, dynamic light scattering, ¹H NMR spectroscopy, and Cu²⁺‐responsive experiments. Furthermore, 2D NOESY NMR and UV/Vis spectroscopy results indicate that the formation of the primary micelles is driven by hydrophilic–hydrophobic interactions, whereas host–guest interactions promote the formation of the secondary assemblies. Additionally, ultrasonication is shown to be able to effectively destroy the primary hydrophilic–hydrophobic balances while enhancing the host–guest interaction between the LA and β‐CD moieties at room temperature.     

NMR Spectroscopic Study of the Self‐Aggregation of 3‐Hexen‐1,5‐diyne Derivatives

The self‐assembly of polycatenar molecules derived from 1,6‐diphenyl‐3,4‐dipropyl‐3‐hexen‐1,5‐diyne has been studied in detail by solution NMR spectroscopy. The analysis of the concentration‐ and temperature‐dependent evolution of the chemical shifts and the diffusion coefficients in [D₁₂]cyclohexane agrees well with an isodesmic model of association in this solvent. The association constants for the stacking and entropy and enthalpy of the process have been obtained. The driving force for the aggregation process is provided by a negative enthalpy (ΔH), which is partially compensated by a negative entropy (ΔS). A structural study of the self‐assembly in solution has been carried out with the help of NOESY NMR spectroscopic experiments.     

Dual‐responsive supramolecular inclusion complexes of block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] with α‐cyclodextrin

A new class of temperature and pH dual‐responsive and injectable supramolecular hydrogel was developed, which was formed from block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] (PEG‐b‐PDMAEMA) and α‐cyclodextrin (α‐CD) inclusion complexes (ICs). The PEG‐b‐PDMAEMA diblock copolymers with different ratio of ethylene glycol (EG) to (2‐dimethylamino)ethyl methacrylate (DMAEMA) (102:46 and 102:96, respectively) were prepared by atom transfer radical polymerization (ATRP). ¹H NMR measurement indicated that the ratio of EG unit to α‐CD in the resulted ICs was higher than 2:1. Thermal analysis showed that thermal stability of ICs was improved. The rheology studies showed that the hydrogels were temperature and pH sensitive. Moreover, the hydrogels were thixotropic and reversible. The self‐assembly morphologies of the ICs in different pH and ionic strength environment were studied by transmission electron microscopy. The formed biocompatible micelles have potential applications as biomedical and stimulus‐responsive material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2143–2153, 2010     

Fabrication of Supramolecular Semiconductor Block Copolymers by Ring‐Opening Metathesis Polymerization

ω‐Telechelic poly(p‐phenylene vinylene) species (PPVs) are prepared by living ring‐opening metathesis polymerization of a [2.2]paracyclophane‐1,9‐diene in the presence of Hoveyda–Grubbs 2nd generation initiator, with terminating agents based on N¹,N³‐bis(6‐butyramidopyridin‐2‐yl)‐5‐hydroxyisophthalamide (Hamilton wedge), cyanuric acid, Pd^II–SCS‐pincer, or pyridine moieties installing the supramolecular motifs. The resultant telechelic polymers are self‐assembled into supramolecular block copolymers (BCPs) via metal coordination or hydrogen bonding and analyzed by ¹H NMR spectroscopy. The optical properties are examined, whereby individual PPVs exhibit similar properties regardless of the nature of the end group. Upon self‐assembly, different behaviors emerge: the hydrogen‐bonding BCP behaves similarly to the parent PPVs whereas the metallosupramolecular BCP demonstrates a hypsochromic shift and a more intense emission owing to the suppression of aggregation. These results demonstrate that directional self‐assembly can be a facile method to construct BCPs with semiconducting networks, while combating solubility and aggregation.     

Amphiphilic gradient copolymers containing fluorinated 2‐phenyl‐2‐oxazolines: Microwave‐assisted one‐pot synthesis and self‐assembly in water

Here, we present the one‐step synthesis of 2‐(m‐difluorophenyl)‐2‐oxazoline and its use as a monomer for microwave‐assisted statistical cationic ring‐opening copolymerizations (CROP). Well‐defined amphiphilic gradient copolymers, as evidenced by the polymerization kinetics, were prepared using 2‐ethyl‐2‐oxazoline as comonomer and methyl tosylate as initiator in nitromethane at 140 °C. The resulting gradient copolymers (DP = 60 and 100) were characterized by means of size exclusion chromatography and ¹H NMR spectroscopy. In the second part, we focus on a detailed study of the self‐assembly of the copolymers in aqueous solution using atomic force microscopy and dynamic light scattering. Both methods revealed the self‐assembly of the gradient copolymers into spherical micelles. To quantify the influence of the fluorine atoms and the monomer distribution on the self‐assembly, a comparative study with gradient copolymers of 2‐phenyl‐2‐oxazoline and 2‐ethyl‐2‐oxazoline was performed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5859–5868, 2008     

Cation‐Tuned Stimuli‐Responsive and Optical Properties of Supramolecular Hydrogels

Hierarchical self‐assembly of an amphiphilic tris‐urea in aqueous media is shown. A mixture of the amphiphilic tris‐urea and an alkaline solution gave a viscous solution composed of fibrous aggregates. This viscous solution transformed into supramolecular hydrogels, which are capable of hierarchically organizing into higher‐order aggregates in response to several cationic triggers. The resulting supramolecular hydrogels were relatively stiff and their storage moduli attained over 10³ Pa. The stimuli‐responsive and optical properties of the resulting hydrogels were influenced by the cationic trigger. Proton and calcium ion triggers gave pH‐ and chemical stimuli‐responsive hydrogels, respectively. A terbium ion trigger also provided a highly luminescent hydrogel through energy transfer from the tris‐urea to terbium.     

Aqueous self‐assembly of pullulan‐b‐poly(2‐ethyl‐2‐oxazoline) double hydrophilic block copolymers

The self‐assembly of a novel double hydrophilic block copolymer in water without the application of external triggers is described, namely pullulan‐b‐poly(2‐ethyl‐2‐oxazoline) (Pull‐b‐PEtOx). The biomacromolecules, Pull (8–38 kg mol^?1), is modified and conjugated to biocompatible PEtOx (22 kg mol^?1) via modular conjugation. Moreover, the molecular weight of the Pull blocks are varied to investigate the effect of molecular weight on the self‐assembly behavior. Spherical particles with sizes between 300 and 500 nm are formed in diluted aqueous solution (0.1–1.0 wt %) as observed via dynamic light scattering and static light scattering. Additionally, cryo scanning electron microscopy and laser scanning confocal microscopy are performed to support the finding from light scattering. The block ratio study shows an optimum ratio of Pull and PEtOx of 0.4/0.6 for self‐assembly in water in the concentration range of 0.1–1.0 wt %. At higher concentrations of 20 wt %, vesicular structures with sizes above 1 µm can be observed via optical microscopy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3757–3766     

Biocompatible and pH‐responsive triblock copolymer mPEG‐b‐PCL‐b‐PDMAEMA: Synthesis,self‐assembly,and application

A series of well‐defined amphiphilic triblock copolymers [polyethylene glycol monomethyl ether]‐block‐poly(ε‐caprolactone)‐block‐poly[2‐(dimethylamino)ethyl methacrylate] (mPEG‐b‐PCL‐b‐PDMAEMA or abbreviated as mPEG‐b‐PCL‐b‐PDMA) were prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization. The chemical structures and compositions of these copolymers have been characterized by Fourier transform infrared spectroscopy, ¹H NMR, and thermogravimetric analysis. The molecular weights of the triblock copolymers were obtained by calculating from ¹H NMR spectra and gel permeation chromatography measurements. Subsequently, the self‐assembly behavior of these copolymers was investigated by fluorescence probe method and transmission electron microscopy, which indicated that these amphiphilic triblock copolymers possess distinct pH‐dependent critical aggregation concentrations and can self‐assemble into micelles or vesicles in PBS buffer solution, depending on the length of PDMA in the copolymer. Agarose gel retardation assays demonstrated that these cationic nanoparticles can effectively condense plasmid DNA. Cell toxicity tests indicated that these triblock copolymers displayed lower cytotoxicity than that of branched polyethylenimine with molecular weight of 25 kDa. In addition, in vitro release of Naproxen from these nanoparticles in pH buffer solutions was conducted, demonstrating that higher PCL content would result in the higher drug loading content and lower release rate. These biodegradable and biocompatible cationic copolymers have potential applications in drug and gene delivery. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1079–1091, 2010     

Fine tuning the assembly and gel behaviors of PEGylated polypeptide conjugates by the copolymerization of l‐alanine and γ‐benzyl‐l‐glutamate N‐carboxyanhydrides

Tuning the secondary structure of polypeptide is an effective strategy to modulate the assembly behaviors of polypeptide‐based copolymers. In this study, ring‐opening polymerization of l ‐alanine (Ala) and γ‐benzyl‐l ‐glutamate (BLG) N‐carboxyanhydrides was adopted using mPEG‐NH₂ as the initiator to prepare mPEG‐poly(l ‐alanine‐co‐γ‐benzyl‐l ‐glutamate) (PEAB) copolymers with various Ala to BLG ratios. ¹H NMR spectra and GPC test confirmed their well‐defined chemical structures. FT‐IR spectra indicated that at the powder state, all copolymers adopted both β‐sheet and α‐helical conformations. With the content of PBLG increased, the crystallization temperature and melting points of PEAB copolymers first rose then fell indicated by DSC curves. The self‐assembly of PEAB copolymers in dilute aqueous solution studied by DLS, TEM and circular dichroism spectra showed that PEAB copolymers self‐assembled into nanostructures with diverse morphologies and sizes due to distinct polypeptide conformations. Rheological analysis indicated that the alteration of the polypeptide composition can effectively modulate the modulus of PEAB assemblies in concentrated solutions. In all, copolymerization of two hydrophobic amino acid N‐carboxyanhydrides into the polypeptide block maybe an effective approach for modulating the assembly properties of PEGylated polypeptide. Besides, nanosilver‐encapsulated PEA or PEAB hydrogel showed promising antibacterial effect against Staphylococcus aureus and Bacillus subtillis. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1512–1523     

Single chain self‐assembly of well‐defined heterotelechelic polymers generated by ATRP and click chemistry revisited

Well‐defined heterotelechelic poly(styrene) carrying thymine/diaminopyridine (DAP) (M_n,SEC = 9300, PDI = 1.04) and Hamilton wedge (HW)/cyanuric acid (CA) (M_n,SEC = 8200, PDI = 1.04) bonding motifs are prepared via a combination of controlled/living radical polymerization and copper catalyzed azide/alkyne “click” chemistry and are subsequently self‐assembled as single chains to emulate—on a simple level—the self‐folding behavior of natural biomacromolecules. Hydrogen nuclear magnetic resonance (¹H NMR) in deuterated dichloromethane and dynamic light scattering analyses provides evidence for the hydrogen bonding interactions between the α‐thymine and ω‐DAP as well as α‐CA and ω‐HW chain ends of the heterotelechelic polymers leading to circular entropy driven single chain self‐assembly. This study demonstrates that the choice of NMR solvent is important for obtaining well‐resolved NMR spectra of the self‐assembled structures. In addition, steric effects on the HW can affect the efficiency of the self‐assembly process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Viologen‐Templated Arrays of Cucurbit[7]uril‐Modified Iron‐Oxide Nanoparticles

Magnetic and fluorescent assemblies of iron‐oxide nanoparticles (NPs) were constructed by threading a viologen‐based ditopic ligand, DPV²⁺, into the cavity of cucurbituril (CB[7]) macrocycles adsorbed on the surface of the NPs. Evidence for the formation of 1:2 inclusion complexes that involve DPV²⁺ and two CB[7] macrocycles was first obtained in solution by ¹H NMR and emission spectroscopy. DPV²⁺ was found to induce self‐assembly of nanoparticle arrays (DPV²⁺?CB[7]NPs) by bridging CB[7] molecules on different NPs. The resulting viologen‐crosslinked iron‐oxide nanoparticles exhibited increased saturation magnetization and emission properties. This facile supramolecular approach to NP self‐assembly provides a platform for the synthesis of smart and innovative materials that can achieve a high degree of functionality and complexity and that are needed for a wide range of applications.     

Hybrid amphiphilic block copolymers containing polyhedral oligomeric silsesquioxane: Synthesis,characterization, and self‐assembly in solutions

In this article, the amphiphilic block copolymers containing polyhedral oligomeric silsesquioxane (POSS), namely PMAPOSS‐b‐PAA and PMAPOSS‐b‐P(AA‐co‐St), were synthesized consecutively by reversible addition–fragmentation chain transfer and selective hydrolysis, and characterized by ¹H NMR, ¹³C NMR, Fourier transform infrared spectroscopy and gel permeation chromatography. In the presence of the nearly gradient styrene distribution along the hydrophilic block with a feed molar ratio of tert‐butyl acrylate (tBA) to St being 10/1, patterned core‐corona nanoparticles (NPs) were formed from the mixture of good/selective solvents (THF/water) by a simple evaporation process at room temperature. With the extending of the co‐block length, the self‐assembled NPs exhibited phase separation behavior of spheres‐dispersed, onion‐like and onion‐cluster hierarchical structures in turn. However, while a change in the feed molar ratio occurred, it resulted in the formation of typical core‐shell micelles (20/1, tBA/St) and disordered particles (5/1, tBA/St), respectively. Furthermore, the self‐assembly behavior of PMAPOSS‐b‐P(AA‐co‐St) in DMF was investigated, which showed that it could perform a mixture morphology of well‐dispersive sphere micelles and large aggregate of micelles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Self‐Assembly of Ureido‐Pyrimidinone Dimers into One‐Dimensional Stacks by Lateral Hydrogen Bonding

Ureido‐pyrimidinone (UPy) dimers substituted with an additional urea functionality self‐assemble into one‐dimensional stacks in various solvents through lateral non‐covalent interactions. ¹H NMR and DOSY studies in CDCl₃ suggest the formation of short stacks (<10), whereas temperature‐dependent circular dichroism (CD) studies on chiral UPy dimers in heptane show the formation of much larger helical stacks. Analysis of the concentration‐dependent evolution of chemical shift in CDCl₃ and the temperature‐dependent CD effect in heptane suggest that this self‐assembly process follows an isodesmic pathway in both solvents. The length of the aggregates is influenced by substituents attached to the urea functionality. In sharp contrast, UPy dimers carrying an additional urethane group do not self‐assemble into ordered stacks, as is evident from the absence of a CD effect in heptane and the concentration‐independent chemical shift of the alkylidene proton of the pyrimidinone ring in CDCl₃.     

Synthesis and self‐assembling of poly(N‐isopropylacrylamide‐block‐poly(L‐lactide)‐block‐poly(N‐isopropylacrylamide) triblock copolymers prepared by combination of ring‐opening polymerization and atom transfer radical polymerization

Novel thermo‐responsive poly(N‐isopropylacrylamide)‐block‐poly(l ‐lactide)‐block‐poly(N‐isopropylacylamide) (PNIPAAm‐b‐PLLA‐b‐PNIPAAm) triblock copolymers were successfully prepared by atom transfer radical polymerization of NIPAAm with Br‐PLLA‐Br macroinitiator, using a CuCl/tris(2‐dimethylaminoethyl) amine (Me₆TREN) complex as catalyst at 25 °C in a N,N‐dimethylformamide/water mixture. The molecular weight of the copolymers ranges from 18,000 to 38,000 g mol^?1, and the dispersity from 1.10 to 1.28. Micelles are formed by self‐assembly of copolymers in aqueous medium at room temperature, as evidenced by ¹H NMR, dynamic light scattering (DLS) and transmission electron microscopy (TEM). The critical micelle concentration determined by fluorescence spectroscopy ranges from 0.0077 to 0.016 mg mL^?1. ¹H NMR analysis in selective solvents confirmed the core‐shell structure of micelles. The copolymers exhibit a lower critical solution temperature (LCST) between 32.1 and 32.8 °C. The micelles are spherical in shape with a mean diameter between 31.4 and 83.3 nm, as determined by TEM and DLS. When the temperature is raised above the LCST, micelle size increases at high copolymer concentrations due to aggregation. In contrast, at low copolymer concentrations, decrease of micelle size is observed due to collapse of PNIPAAm chains. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3274–3283