Fabrication of a Hydrogen‐Bonded Organic Framework Membrane through Solution Processing for Pressure‐Regulated Gas Separation

Ordered and flexible porous frameworks with solution processability are highly desirable to fabricate continuous and large‐scale membranes for the efficient gas separation. Herein, the first microporous hydrogen‐bonded organic framework (HOF) membrane has been fabricated by an optimized solution‐processing technique. The framework exhibits the superior stability because of the abundant hydrogen bonds and strong π–π interactions. Thanks to the flexible HOF structure, the membrane possesses the unprecedented pressure‐responsive H₂/N₂ separation performance. Furthermore, the scratched membrane can be healed by the treatment of solvent vapor, achieving the recovery of separation performance.     

An Amide‐Functionalized Dynamic Metal–Organic Framework Exhibiting Visual Colorimetric Anion Exchange and Selective Uptake of Benzene over Cyclohexane

A novel porous metal–organic framework (MOF) architecture is formed by a neutral amide‐functionalized ligand and copper(II). Upon desolvation, this compound undergoes a dynamic structural transformation from a one‐dimensional (1D) porous phase to a two‐dimensional (2D) non‐porous phase that shows selective uptake of benzene over cyclohexane. The as‐synthesized compound also acts as a visual colorimetric anion sensor for thiocyanate.     

Water‐Soluble Three‐Dimensional Polymers: Non‐Covalent and Covalent Synthesis and Functions†

Water‐soluble three‐dimensional (3D) polymers are structurally ideal for the construction of ordered porous materials for in‐situ and tunable loading and release of guests. For many years, studies on ordered porous materials have been confined to crystalline solids. Since 2014, self‐assembly has been developed as a robust strategy for the preparation of water‐soluble 3D polymers that possess defined and intrinsic porosity. Through the encapsulation of cucurbit[8]uril for aromatic dimers, ordered diamondoid supramolecular organic frameworks can be assembled from tetrahedral monomers. With [Ru(bipy)₃]²⁺‐derived octahedral complexes as precursors, cubic supramolecular metal‐organic frameworks have been assembled. One supramolecular organic framework has also been utilized to prepare the first homogeneous covalent organic framework through the [2+2] alkene cycloaddition, whereas the quantitative formation of the hydrazone bonds can be utilized to synthesize flexible porous organic frameworks. The new water‐soluble ordered and flexible polymeric frameworks are able to include drugs and biomacromolecules to accomplish in situ loading and intracellular delivery and to enrich photosensitizers and catalysts to enhance discrete visible light‐induced reactions. This review highlights the advances.     

polyMOFs: A Class of Interconvertible Polymer‐Metal‐Organic‐Framework Hybrid Materials

Preparation of porous materials from one‐dimensional polymers is challenging because the packing of polymer chains results in a dense, non‐porous arrangement. Herein, we demonstrate the remarkable adaptation of an amorphous, linear, non‐porous, flexible organic polymer into a three‐dimensional, highly porous, crystalline solid, as the organic component of a metal–organic framework (MOF). A polymer with aromatic dicarboxylic acids in the backbone functioned as a polymer ligand upon annealing with Zn^II, generating a polymer–metal–organic framework (polyMOF). These materials break the dogma that MOFs must be prepared from small, rigid ligands. Similarly, polyMOFs contradict conventional polymer chemistry by demonstrating that linear and amorphous polymers can be readily coaxed into a highly crystalline, porous, three‐dimensional structure by coordination chemistry.     

Direct synthesis of hierarchically porous TS‐1 through a solvent‐evaporation route and its application as an oxidation catalyst

Synthesis of hierarchically porous zeolites has drawn intensive interest because of their improved catalytic performance. It is highly desirable to find ways to generate these materials in a low‐cost and scalable way for their commercial applications. A solvent evaporation route has been established to synthesize hierarchically porous titanosilicalite‐1 (TS‐1). In the protocol, hexadecyltrimethoxysilane was added to an ethanolic solution of titanium isopropoxide, tetraethyl orthosilicate and tetrapropylammonium hydroxide, i.e. the embryo solution of TS‐1. The solution was subjected to solvent evaporation‐induced self‐assembly to afford an ordered dry gel. Subsequent steam‐assisted crystallization converted the dry gel into a hierarchically porous TS‐1. X‐ray powder diffraction (XRD), UV–visible diffusive reflectance spectroscopy, N₂ physisorption and electron microscopic characterizations have been employed to elucidate the structure. Ti is incorporated into the tetrahedral sites of the MFI structure and mesopores around 20 nm penetrating the crystalline framework are formed. Hexadecyltrimethoxysilane plays a key role in creating mesopores as well as increasing the crystal size. The hierarchically porous TS‐1 exhibits improved activity in styrene oxidation and phenol hydroxylation. Copyright © 2014 John Wiley & Sons, Ltd.     

Post‐Synthetic Anisotropic Wet‐Chemical Etching of Colloidal Sodalite ZIF Crystals

Controlling the shape of metal–organic framework (MOF) crystals is important for understanding their crystallization and useful for myriad applications. However, despite the many advances in shaping of inorganic nanoparticles, post‐synthetic shape control of MOFs and, in general, molecular crystals remains embryonic. Herein, we report using a simple wet‐chemistry process at room temperature to control the anisotropic etching of colloidal ZIF‐8 and ZIF‐67 crystals. Our work enables uniform reshaping of these porous materials into unprecedented morphologies, including cubic and tetrahedral crystals, and even hollow boxes, by an acid–base reaction and subsequent sequestration of leached metal ions. Etching tests on these ZIFs reveal that etching occurs preferentially in the crystallographic directions richer in metal–ligand bonds; that, along these directions, the etching rate tends to be faster on the crystal surfaces of higher dimensionality; and that the etching can be modulated by adjusting the pH of the etchant solution.     

Sponge‐Like Behaviour in Isoreticular Cu(Gly‐His‐X) Peptide‐Based Porous Materials

We report two isoreticular 3D peptide‐based porous frameworks formed by coordination of the tripeptides Gly‐L ‐His‐Gly and Gly‐L ‐His‐L ‐Lys to Cu^II which display sponge‐like behaviour. These porous materials undergo structural collapse upon evacuation that can be reversed by exposure to water vapour, which permits recovery of the original open channel structure. This is further confirmed by sorption studies that reveal that both solids exhibit selective sorption of H₂O while CO₂ adsorption does not result in recovery of the original structures. We also show how the pendant aliphatic amine chains, present in the framework from the introduction of the lysine amino acid in the peptidic backbone, can be post‐synthetically modified to produce urea‐functionalised networks by following methodologies typically used for metal–organic frameworks built from more rigid “classical” linkers.     

Guest‐Adaptable and Water‐Stable Peptide‐Based Porous Materials by Imidazolate Side Chain Control

The peptide‐based porous 3D framework, ZnCar, has been synthesized from Zn²⁺ and the natural dipeptide carnosine (β‐alanyl‐L ‐histidine). Unlike previous extended peptide networks, the imidazole side chain of the histidine residue is deprotonated to afford Zn–imidazolate chains, with bonding similar to the zeolitic imidazolate framework (ZIF) family of porous materials. ZnCar exhibits permanent microporosity with a surface area of 448 m² g^?1, and its pores are 1D channels with 5 Å openings and a characteristic chiral shape. This compound is chemically stable in organic solvents and water. Single‐crystal X‐ray diffraction (XRD) showed that the ZnCar framework adapts to MeOH and H₂O guests because of the torsional flexibility of the main His‐β‐Ala chain, while retaining the rigidity conferred by the Zn–imidazolate chains. The conformation adopted by carnosine is driven by the H bonds formed both to other dipeptides and to the guests, permitting the observed structural transformations.     

Grain‐Boundary‐Free Super‐Proton Conduction of a Solution‐Processed Prussian‐Blue Nanoparticle Film

A porous crystal family has been explored as alternatives of Nafion films exhibiting super‐proton conductivities of ≥10⁻² S cm⁻¹. Here, the proton‐conduction natures of a solution‐processed film of nanoparticles (NPs) have been studied and compared to those of a Nafion film. A mono‐particle film of Prussian‐blue NPs is spontaneously formed on a self‐assembled monolayer substrate by a one‐step solution process. A low‐temperature heating process of the densely packed, pinhole‐free mono‐particle NP film enables a maximum 10⁵‐fold enhancement of proton conductivity, reaching ca. 10⁻¹ S cm⁻¹. The apparent highest conductivity, compared to previously reported data of the porous crystal family, remains constant against humidity changes by an improved water‐retention ability of the film. In our proposed mechanism, the high‐performing solution‐processed NP film suggests that heating leads to the self‐restoration of hydrogen‐bonding networks throughout their innumerable grain boundaries.     

Microwave‐Assisted Modular Fabrication of Nanoscale Luminescent Metal‐Organic Framework for Molecular Sensing

Miniaturizing the size of metal‐organic framework (MOF) crystals to the nanometer scale is challenging, but it provides more advanced applications without changing the characteristic features itself. It is especially useful to investigate the correlation between the porous properties and the interfacial structures of nanocrystals. Using amino acids as capping agents, nanoscale Tb‐MOF‐76 is fabricated rapidly by means of microwave‐assisted methods. Both the modular effects of the amimo acids and the acid–base environment of the reaction medium have an important impact on the morphologies and dimensions of Tb‐MOF‐76. The structures of the samples are confirmed by powder X‐ray diffraction, and the morphologies are characterized by SEM. Photoluminescence studies reveal that these Tb‐MOF‐76 materials exhibit a green emission corresponding to the transition ⁵D₄→⁷F_J of Tb³⁺ ions under UV‐light excitation, which is sensitive to small organic molecules in solution.     

Extreme Flexibility in a Zeolitic Imidazolate Framework: Porous to Dense Phase Transition in Desolvated ZIF‐4

Desolvated zeolitic imidazolate framework ZIF‐4(Zn) undergoes a discontinuous porous to dense phase transition on cooling through 140 K, with a 23 % contraction in unit cell volume. The structure of the non‐porous, low temperature phase was determined from synchrotron X‐ray powder diffraction data and its density was found to be slightly less than that of the densest ZIF phase, ZIF‐zni. The mechanism of the phase transition involves a cooperative rotation of imidazolate linkers resulting in isotropic framework contraction and pore space minimization. DFT calculations established the energy of the new structure relative to those of the room temperature phase and ZIF‐zni, while DSC measurements indicate the entropic stabilization of the porous room temperature phase at temperatures above 140 K.     

Synthesis,Crystal Structure,and Properties of the 3D Porous Framework [Zn(INAIP)]·DMA·H2O

A new three‐dimensional (3D) porous framework [Zn(INAIP)] · DMA · H₂O ( 1 ) [INAIP = 5‐(isonicotinamido)isophthalate, DMA = N,N′‐dimethylacetamide] was synthesized by solvothermal methods and characterized by single‐crystal and powder X‐ray diffraction, as well as thermogravimetric analysis. The results of X‐ray diffraction analyses revealed that complex 1 has an unusual 3D architecture with the (3,6)‐connected rutile ( rtl ) topology. The adsorption behavior shows that compound 1 exhibits selective adsorptions of CO₂ over N₂ after the removal of the solvent molecules within the pores.     

Crew‐cut aggregates from self‐assembly of blends of polystyrene‐b‐poly(acrylic acid) block copolymers and homopolystyrene in solution

The formation and morphological characteristics of crew‐cut aggregates from blends of polystyrene‐b‐poly(acrylic acid) diblock copolymer and polystyrene homopolymer in solution were studied by static light scattering, transmission electron microscopy and size exclusion chromatography. The crew‐cut aggregates, consisting of a polystyrene core and a poly(acrylic acid) corona, were prepared by direct dissolution of the polymer blends in a selective solvent mixture consisting of 93 wt % dimethylformamide and 7 wt % water. It is found that the aggregation behavior depends strongly on the relative volume fractions of the block copolymer and homopolymer in the blends. This is a result of the difference in solubility between the copolymer and the homopolymer in solution which, in turn, influences their miscibility and mutual solubility and consequently the morphology of the formed crew‐cut aggregates. Specifically, when the homopolymer fraction is low, it is mainly dissolved in the cores of the crew‐cut aggregates formed by the block copolymer. When the homopolymer fraction exceeds its solubility limit in the copolymer micelles, aggregates of another type are formed which contain a major fraction of the homopolymer. These aggregates are usually much larger than the primary micelles and have an internal structure due to the formation of reverse micelles from the dissolved block copolymer chains. The importance of thermodynamic vs. kinetic aspects during the formation of the crew‐cut aggregates is also discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1469–1484, 1999     

Eye‐Catching Dual‐Fluorescent Dynamic Metal–Organic Framework Senses Traces of Water: Experimental Findings and Theoretical Correlation

A guest‐dependent dynamic fivefold interpenetrated 3D porous metal–organic framework (MOF) of Zn^II ions has been synthesized that exhibits selective carbon dioxide adsorption. Furthermore, the MOF shows excellent luminescence behavior, which is supported by a systematic study on the guest‐responsive multicolor emission of a suspension of the MOF. The dual‐emission behavior arises from the excited‐state intramolecular proton transfer (ESIPT), and the compound also shows remarkable potential to detect traces of water in various organic solvents. The experimental observations were also painstakingly authenticated by using time‐dependent density‐functional‐theory (DFT) calculations.     

Surface‐Anchored MOF‐Based Photonic Antennae

The loading of a metal‐organic framework (MOF), [Cu₃(btc)₂xH₂O] HKUST‐1, with europium β‐diketonate complexes is studied with the goal to using the porous molecular framework as a photonic antenna. Whereas loading of HKUST‐1 powder particles produced via the conventional solvothermal synthesis method was strongly hindered, for HKUST‐1 SURMOFs, thin MOF films fabricated using the liquid phase epitaxy method, a high filling factor can be achieved. The optical properties of the HKUST‐1‐MOFs before and after loading were analysed with the aid of luminescence spectroscopy. Careful analysis of the absorption spectra reveals the presence of an effective energy transfer between the HKUST‐1 framework and the Eu³⁺ centers.     

Lock‐and‐Key and Shape‐Memory Effects in an Unconventional Synthetic Path to Magnesium Metal–Organic Frameworks

We report a new magnesium metal–organic framework (MOF) (CPM‐107) with a special interaction with CO₂. CPM‐107 contains Mg₂‐acetate chains crosslinked into a 3D net by terephthalate. It has an anionic framework encapsulating ordered extra‐framework cations and solvent molecules. The desolvated form is closed and unresponsive to common gasses, such as N₂, H₂, and CH₄. Yet, with CO₂ at 195 K, it abruptly opens and turns into a rigid porous form that is irreversible via desorption. Once opened by CO₂, CPM‐107 remains in the stable porous state accessible to additional gas types over multiple cycles or CO₂ itself at different temperatures. The porous phase can be re‐locked to return to the initial closed phase via re‐solvation and desolvation. Such peculiar properties of CPM‐107 are apparently linked to a convergence of factors related to both framework and extra‐framework features. The unusual CO₂ effect is currently the only available path to porous CPM‐107 which shows efficient C₂H₂/CO₂ separation.     

Two Robust Porous Metal–Organic Frameworks Sustained by Distinct Catenation: Selective Gas Sorption and Single‐Crystal‐to‐Single‐Crystal Guest Exchange

Assembly of copper(I) halide with a new tripodal ligand, benzene‐1,3,5‐triyl triisonicotinate (BTTP4), afforded two porous metal–organic frameworks, [Cu₂I₂(BTTP4)]?2 CH₃CN ( 1? 2 CH₃CN) and [CuBr(BTTP4)]?(CH₃CN ? CHCl₃ ? H₂O) ( 2? solvents), which have been characterized by IR spectroscopy, thermogravimetry (TG), single‐crystal, and powder X‐ray diffraction (PXRD) methods. Compound 1.CH3CN is a polycatenated 3D framework that consists of 2D (6,3) networks through inclined catenation, whereas 2 is a doubly interpenetrated 3D framework possessing the ThSi₂‐type ( ths ) (10,3)‐b topology. Both frameworks contain 1D channels of effective sizes 9×12 and 10×10 Ų, which amounts to 43 and 40 % space volume accessible for solvent molecules, respectively. The TG and variable‐temperature PXRD studies indicated that the frameworks can be completely evacuated while retaining the permanent porosity, which was further verified by measurement of the desolvated complex [Cu₂I₂(BTTP4)] ( 1′ ). The subsequent guest‐exchange study on the solvent‐free framework revealed that various solvent molecules can be adsorbed through a single‐crystal‐to‐single‐crystal manner, thus giving rise to the guest‐captured structures [Cu₂I₂(BTTP4)]?C₆H₆ ( 1.benzene ), [Cu₂I₂(BTTP4)]?2 C₇H₈ ( 1.2toluene ), and [Cu₂I₂(BTTP4)]?2 C₈H₁₀ ( 1.2ethyl benzene ). The gas‐adsorption investigation disclosed that two kinds of frameworks exhibited comparable CO₂ storage capacity (86–111 mL g^?1 at 1 atm) but nearly none for N₂ and H₂, thereby implying its separation ability of CO₂ over N₂ and H₂. The vapor‐adsorption study revealed the preferential inclusion of aromatic guests over nonaromatic solvents by the empty framework, which is indicative of selectivity toward benzene over cyclohexane.     

Tuning of Supramolecular Architectures of l‐Valine‐Containing Dicyanoplatinum(II) 2,2′‐Bipyridine Complexes by Metal–Metal, π–π Stacking,and Hydrogen‐Bonding Interactions

A series of newly synthesized dicyanoplatinum(II) 2,2′‐bipyridine complexes exhibits self‐assembly properties in solution after the incorporation of the l ‐valine amino units appended with various hydrophobic motifs. These l ‐valine‐derived substituents were found to have critical control over the aggregation behaviors of the complexes in the solution state. On one hand, one of the complexes was found to exhibit interesting circularly polarized luminescence (CPL) signals at low temperature due to the formation of chiral spherical aggregates in the temperature‐dependent studies. On the other hand, systematic transformation from less uniform aggregates to well‐defined fibrous and rod‐like structures via Pt???Pt and π–π stacking interactions has also been observed in the mixed‐solvent studies. These changes were monitored by UV/Vis absorption, emission, circular dichroism (CD), and CPL spectroscopies, and morphologies were studied by electron microscopy.     

A Highly‐Ordered 3D Covalent Fullerene Framework

A highly‐ordered 3D covalent fullerene framework is presented with a structure based on octahedrally functionalized fullerene building blocks in which every fullerene is separated from the next by six functional groups and whose mesoporosity is controlled by cooperative self‐assembly with a liquid‐crystalline block copolymer. The new fullerene‐framework material was obtained in the form of supported films by spin coating the synthesis solution directly on glass or silicon substrates, followed by a heat treatment. The fullerene building blocks coassemble with a liquid‐crystalline block copolymer to produce a highly ordered covalent fullerene framework with orthorhombic Fmmm symmetry, accessible 7.5 nm pores, and high surface area, as revealed by gas adsorption, NMR spectroscopy, small‐angle X‐ray scattering (SAXS), and TEM. We also note that the 3D covalent fullerene framework exhibits a dielectric constant significantly lower than that of the nonporous precursor material.     

Preparation of porous polylactide microspheres by emulsion‐solvent evaporation based on solution induced phase separation

Porous polylactide (PLA) microspheres were fabricated by an emulsion‐solvent evaporation method based on solution induced phase separation. Scanning electron microscopy (SEM) observations confirmed the porous structure of the microspheres with good connectivity. The pore size was in the range of decade micrometers. Besides large cavities as similarly existed on non‐porous microspheres, small pores were found on surfaces of the porous microspheres. The apparent density of the porous microspheres was much smaller than that of non‐porous microspheres. Fabrication conditions such as stirring rate, good solvent/non‐solvent ratio, PLA concentration and dispersant (polyvinyl alcohol, PVA) concentration had an important influence on both the particle size and size distribution and the pore size within the microspheres. A larger pore size was achieved at a slower stirring rate, lower good solvent/non‐solvent ratio or lower PLA concentration due to longer coalescence time. Copyright © 2005 John Wiley & Sons, Ltd.