A Simple One‐Pot Synthesis of N‐Alkyl‐2,5‐diaryl‐1,3‐dioxol‐4‐amines

An efficient procedure for the synthesis of N‐alkyl‐2,5‐diaryl‐1,3‐dioxol‐4‐amines 3 via a one‐pot reaction of aromatic aldehydes 2 and alkyl isocyanides 1 at room temperature in good yields is described (Scheme 1, Table).     

Chemoselective hydrogenation of nitriles to primary amines catalyzed by water‐soluble transition metal catalysts

The water‐soluble rhodium complex generated in situ from [Rh (COD)Cl]₂ in aqueous ammonia has been revealed as a highly efficient catalyst for the hydrogenation of aromatic nitriles, to primary amines with excellent yields. The catalyst is also highly selective towards primary amines in the case of sterically hindered aliphatic nitriles. The catalytic system can also be recycled and re‐used with no significant loss of activity.     

Consecutive Intermolecular Reductive Hydroamination: Cooperative Transition‐Metal and Chiral Brønsted Acid Catalysis

Enantiomerically pure chiral amines are of increasing importance and commercial value in the fine chemical, pharmaceutical, and agrochemical industries. Here, we describe the straightforward synthesis of chiral amines by combining the atom‐economic and environmentally friendly hydroamination of alkynes with an enantioselective hydrogenation of in situ generated imines by using inexpensive hydrogen. By following this novel approach, a wide range of terminal alkynes can be reductively hydroaminated with primary amines including alkyl‐, and arylalkynes as well as aryl and heteroaryl amines. Excellent yields and selectivities up to 94 % ee and 96 % isolated yield were obtained.     

Sn‐mediated one‐pot four‐component allylation of aldimines

A convenient and facile method for the synthesis of homoallylic amines was disclosed. The one‐pot reaction of aldehydes, aromatic amines and allylic bromide with tin powder at room temperature could afford the homoallylic amines in good to excellent yield without any promoter or additive. The method is highly efficient and environmentally benign with low cost and concise manipulation. Copyright © 2014 John Wiley & Sons, Ltd.     

Highly Efficient Ruthenium‐Catalyzed N‐Formylation of Amines with H2 and CO2

A highly efficient catalyst system based on ruthenium‐pincer‐type complexes has been discovered for N‐formylation of various amines with CO₂ and H₂, thus affording the corresponding formamides with excellent productivity (turnover numbers of up to 1 940 000 in a single batch) and selectivity. Using a simple catalyst recycling protocol, the catalyst was reused for 12 runs in N,N‐dimethylformamide production without significant loss of activity, thus demonstrating the potential for practical utilization of this cost‐effective process. A one‐pot two‐step procedure for hydrogenation of CO₂ to methanol via the intermediacy of formamide formation has also been developed.     

Enantioselective Zinc/BINOL‐Catalysed Alkynylation of Aldimines Generated in Situ from α‐Amido Sulfones

Chiral nonracemic N‐Cbz‐protected propargylic amines have been prepared by the addition of terminal alkynes to imines generated in situ from α‐amido sulfones in the presence of diethylzinc and BINOL‐type ligands as catalysts. The reactions give good yields and high enantioselectivities (ee values up to 95 %) for a good number of aromatic and heteroaromatic α‐amido sulfones and alkynes.     

Preparation,characterization and application of a new 25,27‐bis‐[2‐(5‐methylthiadiazole)thioethoxyl]‐26,28‐dihydroxy‐para‐tert‐butyl calix[4]arene stationary phase for HPLC

A new para‐tert‐butylcalix[4]arene column containing thiadiazole functional groups was prepared and used for the separation of polycyclic aromatic hydrocarbons, phenolic compounds, aromatic amines, benzoic acid and its derivatives by high‐performance liquid chromatography (HPLC). The effect of organic modifier content in the mobile phase on retention and selectivity of these compounds were investigated. The results indicate that the stationary phase behaves like reversed‐phase packing. However, hydrogen bonding, π–π and inclusion interactions seem to be involved in the separation process. The column has been successfully employed for the analysis of clenbuterol in pork and pig casing; the limit of detection and the limit of quantitation for this method by HPLC‐UV detection was 0.03 and 0.097 μg/mL, respectively; the method is demonstrated to be suitable and a competitive alternative analytical method for the determination of clenbuterol.     

Cu(I)‐catalyzed Green Synthesis of Propargyl Amines Decorated with Carbazole Moiety by A3 ‐Coupling

A series of novel N ‐alkylcarbazol–propargylamine hybrids were designed and synthesized by Cu^IBr ‐catalyzed A³ ‐coupling of N ‐octylcarbazol‐3‐carbaldehyde, amines, and alkynes. The tri‐substituted propargyl amines decorated with carbazole moiety were obtained under solvent‐free conditions in good to moderate yields. Furthermore, the scope of the method was studied, which was found to be applicable to primary aliphatic and aromatic amines. Also, a large variety of substituents both on alkynes and anilines are well tolerated.     

Grafting of commercially available amines bearing aromatic rings onto poly(vinylidene‐co‐hexafluoropropene) copolymers

The grafting of poly(VDF‐co‐HFP) copolymers with different amines containing aromatic rings, such as aniline, benzylamine, and phenylpropylamine, is presented. ¹⁹F NMR characterization enabled us to show that the sites of grafting of aromatic‐containing amines were first difluoromethylene of vinylidene fluoride (VDF) in the hexafluoropropene (HFP)/VDF/HFP triad and then that of VDF adjacent to HFP. The kinetics of grafting of benzylamine, monitored by ¹H NMR spectroscopy, confirmed those sites of grafting and showed that all VDF units located between two HFPs were grafted in the first 150 min, whereas those adjacent to one HFP unit were grafted in the remaining 3000 min. Parameters such as the temperature or the molar percentage of HFP in the copolymer had an influence on the maximum rate of grafted benzylamine. The higher the temperature, the higher the molar percentage of grafted benzylamine. Furthermore, the higher the molar percentage of HFP in the copolymer, the higher the molar percentage of VDF in the HFP/VDF/HFP triad, and the higher the molar percentage of grafted benzylamine. The spacer length between the aromatic ring and the amino group had an influence on the kinetics of grafting: aniline (pK_a = 4.5) could not add onto the polymeric backbone, whereas phenylpropylamine was grafted in the first 150 min, and benzylamine required 3000 min to reach the maximum amount of grafting. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1855–1868, 2006     

Determination of trace amounts of aromatic amines after magnetic solid‐phase extraction using silver‐modified Fe3O4/graphene nanocomposite

In this work, a fast and simple magnetic dispersive solid phase extraction methodology was developed utilizing Ag@magnetite nanoparticles@graphene nanocomposite as an efficient magnetic nanosorbent for preconcentration and determine of five aromatic amines in water samples. The sorbent was characterized by diverse characterization techniques. After the extraction, high‐performance liquid chromatography with UV detection was utilized to analysis the aromatic amines. The effects of different factors on the extraction process were studied thoroughly via design of experiment and desirability function. Detection limits and linear dynamic ranges were obtained in the range of 0.10–0.20 and 0.3–300 μg/L, respectively. The relative standard deviations (n = 5) were in the range of 4.3–6.5%. Eventually, the method was employed for determination of target aromatic amines in various water samples.     

Facile N‐Alkylation/N′‐Arylation Process: A Direct Approach to Aromatic Aminoalkyl Amines

An intriguing C?N transformation involving a catalyst‐free N‐alkylation/N′‐arylation process in a multicomponent reaction with secondary amines, cyclic tertiary amines and electron‐deficient aryl halides has been described. In this case, the N‐alkylation of secondary amines, utilizing cyclic tertiary amines as alkyl group sources, is enabled by a facile C?N cleavage. Such an operationally simple method could facilitate access to aromatic aminoalkyl amines, nitrogen‐containing bioactive molecules, in good to excellent yields.     

Regioselective Insertion of o‐Carborynes into the α‐CH Bond of Tertiary Amines: Synthesis of α‐Carboranylated Amines

o‐Carboryne can undergo α‐C? H bond insertion with tertiary amines, thus affording α‐carboranylated amines in very good regioselectivity and isolated yields. In this process, the nucleophilic addition of tertiary amines to the multiple bond of o‐carboryne generates a zwitterionic intermediate. An intramolecular proton transfer, followed by a nucleophilic attack leads to the formation of the final product. Thus, regioselectivity is highly dependent upon the acidity of α‐C? H proton of tertiary amines. This approach serves as an efficient methodology for the preparation of a series of 1‐aminoalkyl‐o‐carboranes.     

Biosensing of Aromatic Amines in Reversed Micelles with Self‐Generation of Hydrogen Peroxide at Glucose Oxidase‐Peroxidase Bienzyme Electrodes

The amperometric biosensing of aromatic amines using a composite glucose oxidase (GOD)‐peroxidase (HRP) biosensor in reversed micelles is reported. Rigid composite pellets of graphite and Teflon, in which GOD and HRP were coimmobilized by simple physical inclusion, were employed for the biosensor design. This design allows the in situ generation of the H₂O₂ needed for the enzyme reaction with the aromatic amines, thus preventing the negative effect that the presence of a high H₂O₂ concentration in solution has on HRP activity. The H₂O₂ in situ generation is performed by oxidation of glucose catalyzed by GOD. The effect of the composition of the reversed micelles, i.e., the nature of the organic solvent used as the continuous phase, the nature and concentration of the surfactant used as emulsifying agent, the aqueous 0.05 mol L^?1 phosphate buffer percentage used as the dispersed phase, and the glucose concentration in the aqueous phase, on the biosensor response was evaluated. Reversed micelles formed with ethyl acetate, a 5% of phosphate buffer (pH 7.0) containing 3.0×10^?3 mol L^?1 glucose, and 0.1 mol L^?1 AOT (sodium dioctylsulfosuccinate), were selected as working medium. Well‐defined and reproducible amperometric signals at 0.00 V were obtained for p‐phenylenediamine, 2‐aminophenol, o‐phenylenediamine, m‐phenylenediamine, 1‐naphthylamine, o‐toluidine and aniline. The useful lifetime of one single biosensor was of 60 days. The trend in sensitivity observed for the aromatic amines is discussed considering the effect of their structure on the stabilization of the radicals formed in the enzyme reaction which are electrochemically reduced. The behavior of the composite bienzyme electrode was also evaluated in a FI (flow injection) system using reversed micelles as the carrier. The suitability of the composite bienzyme electrode for the analysis of real samples was demonstrated by determining aniline in spiked carrots.     

Selectivity Control on Hydrogenation of Substituted Nitroarenes through End‐On Adsorption of Reactants in Zeolite‐Encapsulated Platinum Nanoparticles

Platinum nanoparticles encapsulated into zeolite Y (Pt@Y catalyst) exhibit excellent catalytic selectivity in the hydrogenation of substituted nitroarenes to form the corresponding aromatic amines, even after complete conversion. With the hydrogenation of p‐chloronitrobenzene as a model, the role of zeolite encapsulation toward perfect selectivity can be attributed to constraint of the substrate adsorbed on the platinum surface in an end‐on conformation. This conformation results in the activation of only one adsorbed group, with little influence on the other one in the molecule. Owing to a much lower apparent activation energy of Pt@Y for the hydrogenation of a separately adsorbed nitro group than that of the adsorbed chloro group, the Pt@Y catalyst can prevent hydrodechlorination of p‐chloronitrobenzene under mild conditions. Moreover, such a conformation results in a reduced adsorption energy of target p‐chloroaniline on the platinum surface; thus suppressing the reactivity of hydrodechlorination of p‐chloroaniline to circumvent further C−Cl bond breakage.     

3 d Transition Metal‐Catalyzed Hydrogenation of Nitriles and Alkynes

Selective hydrogenation of nitriles and alkynes is crucial considering the vast applications of reduced products in industries and in the synthesis of bioactive compounds. Particularly, the late 3d transition metal catalysts (manganese, iron, cobalt, nickel and copper) have shown promising activity for the hydrogenation of nitriles to primary amines, secondary amines and imines. Similarly, semihydrogenation of alkynes to E‐ and Z‐alkenes by 3d metals is adequately successful both via the transfer hydrogenation and by using molecular hydrogen. The emergence of 3d transition metals in the selective synthesis of industrially relevant amines, imines and alkenes makes this protocol more attractive. Herein, we provide a concise overview on the late 3d transition metal‐catalyzed hydrogenation of nitriles to amines and imines as well as semihydrogenation of alkynes to alkenes.     

Alkyltelluro Substitution Improves the Radical‐Trapping Capacity of Aromatic Amines

The synthesis of a variety of aromatic amines carrying an ortho‐alkyltelluro group is described. The new antioxidants quenched lipidperoxyl radicals much more efficiently than α‐tocopherol and were regenerable by aqueous‐phase N‐acetylcysteine in a two‐phase peroxidation system. The inhibition time for diaryl amine 9 b was four‐fold longer than recorded with α‐tocopherol. Thiol consumption in the aqueous phase was found to correlate inversely to the inhibition time and the availability of thiol is the limiting factor for the duration of antioxidant protection. The proposed mechanism for quenching of peroxyl radicals involves O‐atom transfer from peroxyl to Te followed by H‐atom transfer from amine to alkoxyl radical in a solvent cage.     

Silica Gel as a Promoter of Sequential Aza‐Michael/Michael Reactions of Amines and Propiolic Esters: Solvent‐ and Metal‐Free Synthesis of Polyfunctionalized Conjugated Dienes

We present an efficient, simple, metal‐ and solvent‐free silica‐gel‐promoted synthesis of functionalized conjugated dienes by sequential aza‐Michael/Michael reactions by starting from commercially available primary amines and propiolic esters. The scope and usefulness of the method is demonstrated for 31 examples, including a range of propiolic esters, aliphatic amines, and differently substituted aromatic amines. For aliphatic amines, the products were obtained within 0.5 to 4 h in 52 to 85 % yield, compared with 3.5 to 22 h under classical solution‐phase synthesis, which proceeds with similar or lower yields. The method was found to be particularly useful for weakly nucleophilic aromatic amines, which provided products in 21 to 73 % yield over 2.5 to 9.5 h compared with yields of 0 to 49 % over 1 to 6 d under standard solution‐phase conditions, and for more hydrophobic esters that gave products in yields of 47 to 79 % over 1 to 3 h compared with 0 to 45 % over 4 to 114 h in solvent.     

Iridium‐Catalyzed Asymmetric Hydrogenation of Unfunctionalized Enamines

Optically active tertiary amines are readily prepared by iridium‐catalyzed asymmetric hydrogenation of unfunctionalized enamines (see scheme). The best enantioselectivities with >90 % ee were obtained with N‐aryl‐ and N‐benzyl‐substituted enamines with a terminal double bond. The hydrogenation of enamines derived from cyclic ketones, which has not been reported yet with other catalysts, gave enantiomeric excesses of up to 87 %.

     

A New and Convenient Synthesis of Amino‐phthalimide (1H‐Isoindole‐1,3(2H)‐dione) Derivatives and Their Photoluminescent Properties

A new and convenient synthesis for amino‐phthalimide (1H‐isoindole‐1,3(2H)‐dione) derivatives has been developed starting from an α,β‐unsaturated ketone. The ketones were reacted with amines to give aromatic amine products. This is the first time that substituted amine groups have been incorporated in aromatic rings. The mechanism of the product formation is rationalized by the 1,2‐addition of amines to ketones. All aromatic compounds exhibited high fluorescence properties at the blue‐green region.     

Chemoselective Aromatic Azido Reduction with Concomitant Aliphatic Azide Employing Al/Gd Triflates/NaI and ESI‐MS Mechanistic Studies

Aluminium and gadolinium triflates catalyze the chemoselective reduction of aromatic azides to the corresponding amines in combination with sodium iodide. This mild chemoselective method has been applied to the synthesis of various aryl amines, C2‐azido‐substituted pyrrolo[2,1‐c][1,4]benzodiazepines, and fused[2,1‐b]quinazolinones by an intramolecular azido reduction tandem cyclization reaction. Interestingly, this methodology selectively reduces aryl azides with enhanced yields and proceeds in shorter reaction times than previous strategies. The mechanistic aspects have been investigated and the intermediates associated with this selective transformation have been intercepted and characterized by online monitoring of the reaction by ESI‐MS.