Synthesis of propylene carbonate from carbon dioxide using trans‐dichlorotetrapyridineru‐ thenium(II) as catalyst

trans‐Dichlorotetrapyridineruthenium(II) [trans‐RuCl₂(py)₄] was synthesized and the structure was determined by single crystal X‐ray crystallography. Highly efficient formation of propylene carbonate (PC) from carbon dioxide and propylene oxide was achieved by using a catalyst system composed of trans‐RuCl₂(py)₄ and hexadecyl trimethyl ammonium bromide under mild conditions (4h, 80 °C, 3.0 MPa). PC was obtained in nearly 100% selectivity without the formation of a polymer. The catalyst could be recycled constantly many times without any significant loss of its catalytic activity. On the basis of the results, a mechanism for the reaction was proposed. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Catalytic synthesis of styryl‐capped isotactic polypropylenes

Bis‐styrenic molecules, 1,4‐divinylbenzene (DVB) and 1,2‐bis(4‐vinylphenyl)ethane (BVPE), were successfully combined with hydrogen (H₂) to form consecutive chain transfer complexes in propylene polymerization mediated by an isospecific metallocene catalyst (i.e., rac‐dimethylsilylbis(2‐methyl‐4‐phenylindenyl)zirconium dichloride, I ) activated with methylaluminoxane (MAO), rendering a catalytic access to styryl‐capped isotactic polypropylenes (i‐PP). The chain transfer reaction took place in a unique way where prior to the ultimate chain transfer DVB/H₂ or BVPE/H₂ caused a copolymerization‐like reaction leading to the formation of main chain benzene rings. A preemptive polymer chain reinsertion was deduced after the consecutive actions of DVB/H₂ or BVPE/H₂, which gave the styryl‐terminated polymer chain alongside a metal‐hydride active species. It was confirmed that the chain reinsertion occurred in a regio‐irregular 1,2‐fashion, which contrasted with a normal 2,1‐insertion of styrene monomer and ensured subsequent continuous propylene insertions, directing the polymerization to repeated DVB or BVPE incorporations inside polymer chain. Only as a competitive reaction, the insertion of propylene into metal‐hydride site broke the chain propagation resumption process while completed the chain transfer process by releasing the styryl‐terminated polymer chain. BVPE was found with much higher chain transfer efficiency than DVB, which was attributed to its non‐conjugated structure with much divided styrene moieties resulting in higher polymerization reactivity but lower chain reinsertion tendency. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3709–3713, 2010     

Anionic bulk oligomerization of ethylene and propylene carbonate initiated by bisphenol‐A/base systems

When the bulk oligomerization of 1,3‐dioxolan‐2‐one (ethylene carbonate, EC) and 4‐methyl‐1,3‐dioxolan‐2‐one (propylene carbonate, PC) with the 2,2‐bis(4‐hydroxyphenyl)propane (bisphenol‐A, BPA)/base system (bases such as KHCO₃, K₂CO₃, KOH, Li₂CO₃, and t‐BuOK) was investigated at elevated temperature, significant differences were observed. Oligomerization of EC initiated by BPA/base readily takes place, but the oligomerization of PC is inhibited. The very first propylene carbonate/propylene oxide unit readily forms a phenolic ether bond with the functional groups of BPA phenolate, but the addition of the second monomer unit is rather slow. The oligomerization of EC yields symmetrical oligo(ethylene oxide) side chains. According to IR studies the oligomeric chains formed from PC with BPA contain not only ether but also carbonate bonds. The in situ step oligomerization of the BPA dipropoxylate was also identified by SEC, and a possible reaction mechanism is proposed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 545–550, 1999     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Synthesis and crystallization behavior study of syndiotactic polystyrene‐g‐isotactic polypropylene (sPS‐g‐iPP) graft copolymers

Based on coordination polymerization mechanism only, novel stereoregular graft copolymers with syndiotactic polystyrene main chain and isotactic polypropylene side chain (sPS‐g‐iPP) were synthesized via two steps of catalytic reactions. First, a chain transfer reaction was initiated by a chain transfer complex composed of a styrene derivative, 1,2‐bis(4‐vinylphenyl)ethane, and hydrogen in propylene polymerization mediated by rac‐Me₂Si[2‐Me‐4‐Ph(Ind)]₂ZrCl₂ and MAO, which gave iPP macromonomer bearing a terminal styryl group (iPP‐t‐St). Then the iPP‐t‐St macromonomers of varied molecular mass were engaged in syndiospecific styrene polymerization over a typical mono‐titanocene catalyst (CpTiCl₃/MAO) under different conditions to produce sPS‐g‐iPP graft copolymers of varied structure. With an effective purification process, well‐defined sPS‐g‐iPP copolymers were obtained, which were then subjected to differential scanning calorimetry (DSC) and polarized optical micrograph (POM) studies. The graft copolymers were generally found with dual melting and crystallization temperatures, which were ascribable respectively to the sPS backbone and iPP graft. However, it was revealed that the two segments displayed largely different melting and crystallization behaviors than sPS homopolymer and the precursory iPP‐t‐St macromonomer. Consequently, the graft copolymer exhibited much distinctive crystalline morphologies when compared with their individual components. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Star‐like PAA‐g‐PPO well‐defined amphiphilic graft copolymer synthesized by ATNRC and SET‐NRC reaction

A series of well‐defined amphiphilic star graft copolymers consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic poly(propylene oxide) side chains were synthesized by the sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization and atom transfer nitroxide radical coupling (ATNRC) or single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction followed by the selective hydrolysis of poly(tert‐butyl acrylate) backbone. A Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate, was first homopolymerized via RAFT polymerization using a new star‐like chain‐transfer agent with four arms in a controlled way to give a well‐defined star‐like backbone with a narrow molecular weight distribution (M_w/M_n = 1.23). The grafting‐onto strategy was used to synthesize the well‐defined PtBA‐g‐PPO star graft copolymers with narrow molecular weight distributions (M_w/M_n = 1.14–1.25) via ATNRC or SET‐NRC reaction between the Br‐containing PtBA‐based star‐like backbone and poly(propylene oxide) with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group using CuBr/PMDETA or Cu/PMDETA as catalytic system. PAA‐g‐PPO amphiphilic star graft copolymers were obtained by the selective acidic hydrolysis of star‐like PtBA‐based backbone in acidic environment without affecting the side chains. The critical micelle concentrations in aqueous media and brine were determined by the fluorescence probe technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2084–2097, 2010     

Polymer cyclization inhibits thermal decomposition of carbon‐dioxide‐derived poly(propylene carbonate)s

Remarkable enhancement of CO₂‐derived poly(propylene carbonate) (PPC) against thermal decomposition was achieved by cyclization of linear PPCs. Thus, a CO₂‐derived linear vinyl‐telechelic PPC was synthesized by CO₂–propylene oxide alternating copolymerization initiated from H₂O followed by an end‐capping esterification with 4‐pentenoic acid. Cyclic PPC was synthesized by the end‐to‐end intramolecular reaction of the vinyl‐telechelic linear PPC by metathesis condensation. Comparison of the thermal decomposition temperature (T_d) with linear and cyclic PPCs confirms surprisingly enhanced T_ds of cyclic PPCs. The elimination of chain ends through cyclization is indeed valuable for enhancing T_d of CO₂‐derived PPCs and thus turn the spotlight on the materials design utilizing CO₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3336–3342     

Synthesis of ultra‐high‐molecular‐weight ethylene‐propylene copolymer via quasi‐living copolymerization with N‐heterocyclic carbene ligated vanadium complexes

The quasi‐living copolymerization of ethylene with propylene was achieved by using N‐heterocyclic carbene (NHC) ligated vanadium complex ( V3 , VOCl₃[1,3‐(2,6‐ⁱPr₂C₆H₃)₂(NCH?)₂C:]) due to the stabilization of active center by the introduction of bulky and electron rich NHC ligand with bulky isopropyl substituents at the ortho positions of the phenyl rings. The weight‐average molecular weight (M_w) of the resulting copolymer increases linearly with its weight in 20 min. The ultra‐high‐molecular‐weight (UHMW) ethylene‐propylene copolymer (M_w = 1612 kg mol^?1) can be synthesized with V3 /Et₃Al₂Cl₃ catalytic system. The novel complex V4′ (VCl₃[1,3‐(2,4,6‐Me₃C₆H₂)₂(NCH?)₂C:]·2THF) was constructed by the introduction of two coordinated tetrahydrofuran molecules and decrease in steric hindrance at the ortho positions of phenyl rings. The UHMW ethylene‐propylene copolymer (M_w = 1167 kg mol^?1) can also be synthesized by using V4′ /Et₃Al₂Cl₃ catalytic system. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 553–561     

DFT mechanistic study of the H2‐assisted chain transfer copolymerization of propylene and p‐methylstyrene catalyzed by zirconocene complex

DFT computations have been performed to investigate the mechanism of H₂‐assisted chain transfer strategy to functionalize polypropylene via Zr‐catalyzed copolymerization of propylene and p‐methylstyrene (pMS). The study unveils the following: (i) propylene prefers 1,2‐insertion over 2,1‐insertion both kinetically and thermodynamically, explaining the observed 1,2‐insertion regioselectivity for propylene insertion. (ii) The 2,1‐inserion of pMS is kinetically less favorable but thermodynamically more favorable than 1,2‐insertion. The observation of 2,1‐insertion pMS at the end of polymer chain is due to thermodynamic control and that the barrier difference between the two insertion modes become smaller as the chain length becomes longer. (iii) The pMS insertion results in much higher barriers for subsequent either propylene or pMS insertion, which causes deactivation of the catalytic system. (iv) Small H₂ can react with the deactivated [Zr]?pMS?PP_n facilely, which displace functionalized pMS?PP_n chain and regenerate [Zr]? H active catalyst to continue copolymerization. The effects of counterions are also discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 576–585     

First Stereoselective Synthesis of the Cytotoxic Polyketide (4R)‐1‐(3,5‐Dihydroxyphenyl)‐4‐hydroxypentan‐2‐one

The first stereoselective synthesis of the cytotoxic polyketide (4R)‐1‐(3,5‐dihydroxyphenyl)‐4‐hydroxypentan‐2‐one ( 1 ) was achieved from readily available propylene oxide and 3,5‐dimethoxybenzyl alcohol. The synthesis involves Jacobsen's hydrolytic kinetic resolution (HKR) and Grignard reaction as key steps.     

One‐Pot,Pseudo‐Five‐Component Synthesis of Bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones]

Synthesis and characterization of bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones] are described. The one‐pot, pseudo‐five‐component reaction of an aliphatic diamine, isothiocyanatobenzene, and dialkyl but‐2‐ynedioate at room temperature in anhydrous CH₂Cl₂ gives the title compound in relatively high yield. Under the same conditions, aromatic 1,2‐diamines yield 2‐(arylimino)‐N‐(enaminoaryl)‐1,3‐thiazolidin‐4‐ones in a pseudo‐four‐component reaction. Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 3).     

Synthesis of high‐molecular‐weight elastomeric poly(propylene) with half‐titanocene/MAO catalyst

A novel catalyst precursor, (η⁵‐pentamethylcyclopentadienyl)titanium triallyloxide (Cp*Ti(OCH₂—CH=CH₂)₃), was prepared and employed in a study of propylene polymerization in the presence of methylaluminoxane (MAO). This work has revealed that the half‐titanocene catalyst is desirable for the production of elastomeric poly(propylene) with high molecular weight (M_w = 8–69×10⁴) as well as in good yields under typical polymerization conditions.     

Synthesis of 1,3‐Selenazol‐2(3H)‐imines

The reaction of N,N′‐diarylselenoureas 16 with phenacyl bromide in EtOH under reflux, followed by treatment with NH₃, gave N,3‐diaryl‐4‐phenyl‐1,3‐selenazol‐2(3H)‐imines 13 in high yields (Scheme 2). A reaction mechanism via formation of the corresponding Se‐(benzoylmethyl)isoselenoureas 18 and subsequent cyclocondensation is proposed (Scheme 3). The N,N′‐diarylselenoureas 16 were conveniently prepared by the reaction of aryl isoselenocyanates 15 with 4‐substituted anilines. The structures of 13a and 13c were established by X‐ray crystallography.     

Hydrogen effects in propylene polymerization reactions with titanium‐based Ziegler–Natta catalysts. I. Chemical mechanism of catalyst activation

The hydrogen activation effect in propylene polymerization reactions with Ti‐based Ziegler–Natta catalysts is usually explained by hydrogenolysis of dormant active centers formed after secondary insertion of a propylene molecule into the growing polymer chain. This article proposes a different mechanism for the hydrogen activation effect due to hydrogenolysis of the Ti? iso‐C₃H₇ group. This group can be formed in two reactions: (1) after secondary propylene insertion into the Ti? H bond (which is generated after β‐hydrogen elimination in the growing polymer chain or after chain transfer with hydrogen), and (2) in the chain transfer with propylene if a propylene molecule is coordinated to the Ti atom in the secondary orientation. The Ti? CH(CH₃)₂ species is relatively stable, possibly because of the β‐agostic interaction between the H atom of one of its CH₃ groups and the Ti atom. The validity of this mechanism was demonstrated in a gas chromatography study of oligomers formed in ethylene/α‐olefin copolymerization reactions with δ‐TiCl₃/AlEt₃ and TiCl₄/dibutyl phthalate/MgCl₂–AlEt₃ catalysts. A quantitative analysis of gas chromatography data for ethylene/propylene co‐oligomers showed that the probability of secondary propylene insertion into the Ti? H bond was only 3–4 times lower than the probability of primary insertion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1353–1365, 2002     

First Total Synthesis of 9‐Hydroxy‐8H‐pyrano[3,2‐f]indol‐2‐one

A simple and efficient approach to synthesize a novel pyrrolocoumarin 9‐hydroxy‐8H‐pyrano[3,2‐f]indol‐2‐one ( 7 ) has been described. Starting from vanillin, the key intermediate 7‐methoxy‐1H‐indol‐6‐yl propiolate ( 6 ) was synthesized in six steps. Then, the target compound was obtained by forming pyrone‐ring and demethylation simultaneously in one step. A plausible mechanism invoking PtCl₄ catalyzed one‐step reaction of cyclization and demethylation was also presented.     

Reaction of Ketene Dithioacetals with Pyrazolylcarbohydrazide： Synthesis and Biological Activities of Ethyl 5-Amino-1-（5＇-methyl-1 ＇-t-butyl-4＇-pyrazolyl）carbonyl-3-methylthio-1 H-pyrazole-4-carboxylate

The title compound, C16H23N5O3S, ethyl 5-amino-1-(5‘-methyl-1‘-t-butyl-4‘-pyrazolyl)carbonyl-3-methylthio-1H-pyrazole-4-carboxylate (5) has been synthesized by the treatment of ethyl 2-cyano-3,3-dimethylthioacrylate with 1-t-butyl-5-methyl-4-hydrazinocarbonylpyrazole (4) in refluxed ethanol. The possible mechanism of the above reaction was also discussed. The results of biological test show that the title compound has fungicidal and plant growth regulation activities.     

Propylene‐1H‐1,2,3‐triazole‐4‐methylene‐tethered Isatin‐coumarin Hybrids: Design,Synthesis, and In Vitro Anti‐tubercular Evaluation

A series of novel propylene‐1H‐1,2,3‐triazole‐4‐methylene‐tethered isatin‐coumarin hybrids 7a–l that were composed of three anti‐tubercular bioactive substances/pharmacophore coumarin, isatin, and I‐A09 were designed, synthesized, and assessed for their in vitro anti‐tubercular activity against Mycobacterium tuberculosis (MTB) H₃₇Rv. In spite of the hybrids were inactive against the tested MTB H₃₇Rv, the structure–activity relationship was enriched, and these hybrids may act as an ideal starting point for developing new isatin‐coumarin anti‐TB candidates with various linkers.     

One‐Pot Synthesis of 2‐Oxazolines from Ethyl α‐Cyanocinnamate Derivatives with N‐Bromoacetamide

An efficient method for the one‐pot synthesis of 2‐oxazolines from ethyl α‐cyanocinnamate derivatives with N‐bromoacetamide in the presence of K₃PO₄ has been developed. The reaction performed smoothly and cleanly to give 2‐oxazolines in good to excellent yields (up to 98%) within 4.5 h in acetone at room temperature without protection of inert gases. A total of 13 examples have been investigated. A possible nucleophilic addition reaction mechanism is proposed.     

Preparation,characterization and catalytic application of PdPt bimetallic nanoparticles stabilized by 15‐membered triolefinic macrocycle‐terminated poly(propylene imine) dendrimer

PdPt bimetallic nanoparticles stabilized by 15‐membered triolefinic macrocycle‐stabilized poly(propylene imine) dendrimer (G3‐M(Pd_x Pt_10−x ) DSNs) have been prepared via synthesis of a 15‐membered triolefinic macrocycle‐modified third‐generation poly(propylene imine) dendrimer (G3‐M) and then synchronous ligand exchange with Pd(PPh₃)₄/Pt(PPh₃)₄ complexes. The structure and catalytic activity of the DSNs were characterized using Fourier transform infrared, ¹H NMR, transmission electron microscopy, energy‐dispersive X‐ray and X‐ray photoelectron analyses. As a novel catalyst system, it can be concluded that the composition of the bimetallic nanoparticles has an influence on the catalytic activity of the hydrogenation reaction of acrylonitrile–butadiene rubber, which can be related to synergistic effect. Furthermore, the selectivity and recyclability of G3‐M(Pd_x Pt_10−x ) DSN catalyst are also discussed.     

Heterobi‐ and ‐trimetallic Ion Pairs of Zirconocene‐Based Isoselective Olefin Polymerization Catalysts with AlMe3

The reactivity towards AlMe₃ of discrete cationic ansa‐zirconocenes 2 a,b that are ubiquitously used in isoselective propylene polymerization and based on [{Ph(H)C(3,6‐tBu₂‐Flu)(3‐tBu‐5‐Et‐Cp)}ZrMe₂)] {Cp‐Flu} and rac‐[{Me₂Si‐(2‐Me‐4‐Ph‐Ind)₂}ZrMe₂] {SBI} was scrutinized. The first example of a structurally characterized Group 4 metallocene AlMe₃ adduct ( 3 b ) is reported. In the presence of excess AlMe₃, the {SBI}‐based AlMe₃ adduct 3 b undergoes a slow decomposition via C? H activation in a bridging methyl unit to yield a new species ( 4 b ) with a trimetallic {Zr(μ‐CH₂)(μ‐Me)AlMe(μ‐Me)AlMe₂} core. EXSY NMR data for the process 2 b ? 3 b → 4 b suggest very rapid and reversible binding of an additional AlMe₃ molecule onto AlMe₃ adduct 3 b . The resulting heterotrimetallic species intermediates exchange of methyl groups between different metal centers and slowly undergoes the C? H activation reaction towards 4 b .