Supramacromolecular chemistry: Self‐assembly of polystyrene‐based multi‐armed pseudorotaxane star polymers from multi‐topic C60 derivatives

Multitopic dibenzylammonium derivatives ( 4 ) of C₆₀ were prepared by Bingel reactions of C₆₀ with a malonate diester ( 2 ) containing two t‐BOC protected dibenzylamine moieties, followed by deprotection and protonation. Self‐assembly of model pseudorotaxanes 5 from the multidibenzylammonium C₆₀ derivatives with dibenzo‐24‐crown‐8 was studied by ¹H NMR spectroscopy and mass spectrometry. Self‐assembly of linear and star‐shaped pseudorotaxanes 8 with up to 12 arms based on polystyrenes bearing terminal DB24C8 host units ( 7 ) and the guest functionalized C₆₀ salts was demonstrated by ¹H NMR spectroscopy and solution phase viscometry. These studies provide further evidence of the potential of supramacromolecular chemistry in construction of complex polymeric architectures. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6472–6495, 2009     

Gas‐phase fragmentation of protonated C60‐pyrimidine derivatives

Electrospray ionization mass spectrometry/mass spectrometry (ESI/MS/MS) and multiple stage mass spectrometry (MSⁿ, n > 2) were used in the positive ion mode, with two different types of mass spectrometers, a quadrupole time‐of‐flight and an ion trap, to characterize two sets of different types of C₆₀‐aminopyrimidine exohedral derivatives. In one set, the pyrimidine moiety bears an amino acid methyl ester residue, and in the other the pyrimidine ring is part of a nucleoside‐type moiety, the latter existing as two separated diastereoisomers. We have found that retro‐cycloaddition processes occur for the closed shell protonated species formed by electrospraying C₆₀ derivatives synthesized by Diels–Alder reactions, whereas for the C₆₀ derivatives synthesized via 1,3‐dipolar cycloadditions, these processes did not occur. Formation of diagnostic ions allowed the differentiation between the two groups of fullerene derivatives, and between the diastereoisomers of C₆₀ derivatives with a nucleoside‐type moiety. In general, the fragmentation processes are strongly dependent on the protonation sites and on the structure of the exohedral moieties. Copyright © 2009 John Wiley & Sons, Ltd.     

Hybrids of Copolymers of Fluorene and C60‐Carrying‐Carbazole with Semiconducting Single‐Walled Carbon Nanotubes

Three different copolymers of C₆₀‐carrying‐carbazole and fluorene units with different copolymer composition ratios were designed and synthesized. On the basis of photoluminescence, atomic force microscopy, and Vis‐NIR and Raman spectroscopic analysis, we found that these copolymers solubilize only semiconducting single‐walled carbon nanotubes (sem‐SWNTs) to form copolymer/sem‐SWNT hybrids, in which energy transfer from the copolymer/C₆₀ moieties to the SWNTs was revealed. By comparing two possible hybrid structures with molecular‐mechanics simulations, the greatest stabilization was found when the C₆₀ moieties lay on the sem‐SWNT surfaces.     

Synthesis,Photophysical and Electrochemical Properties of Amide‐Linked Phthalocyanine‐Fullerene Dyad

A new amide‐linked phthalocyanine‐fullerene dyad ZnPc‐C₆₀ was synthesized and characterized. The photophysical and electrochemical properties of the ZnPc‐C₆₀ dyad were investigated. The fluorescence spectrum and quantum yield in different solvents showed the occurrence of photoinduced electron transfer (PET) from the singlet excited ZnPc to C₆₀, which was further confirmed by nanosecond transient absorption spectra and cyclic voltammetry data. The free energy change for charge separation (ΔG_CS) was estimated to be exothermic with ?0.51 eV, which favored the formation of charge‐separation state. The PET from ZnPc to C₆₀ in ZnPc‐C₆₀ made the dyad exhibit stronger reverse saturable absorption performance compared with C₆₀ and the control sample in the Z‐scan experiments, which indicated the synergistic effect of two active moieties in the dyad.     

Synthesis of highly water soluble C60 end‐capped vinyl ether oligomers with well‐defined structure

Highly water soluble [60]fullerene (C₆₀) end‐capped vinyl ether (VE) oligomers with well‐defined structure were synthesized by living cationic polymerization technique. The addition reaction between 1‐octynylfulleride anion and oligomeric cationic species of VEs with pendant acetoxyl or malonic ester functions afforded the precursor C₆₀ end‐capped oligomers. The living VE oligomers were prepared by living cationic polymerization of diethyl 2‐(vinyloxy)ethylmalonate (VOEM) and 2‐acetoxyethyl vinyl ether (AcOVE) by the CH₃CH(OR)Cl/ZnI₂ [R = CH₂CH₂OCOCH₃ and CH₂CH₂CH(COOEt)₂, respectively] initiating system. The precursors were obtained as dark brown gummy solid in 33 and 72% yield for AcOVE and VOEM, respectively. UV‐vis and ¹³C NMR spectroscopy indicated the formation of 1,2‐disubstituted dihydrofullerene derivatives. Hydrolysis of the precursors proceeded quantitatively to give the water‐soluble C₆₀ end‐capped oligomers having oligo(sodium 2‐vinyloxyethylmalonate) [oligo(VOEMNa)] and oligo(2‐hydroxyethyl vinyl ether) [oligo(HOVE)] moieties. Solubility measurements revealed the water‐soluble C₆₀ end‐capped oligomer with oligo(VOEMNa) chain to have the excellent aqueous solubility compared to that of the water‐soluble C₆₀ derivatives thus far known; the maximum solubility in water is 96.6 mg/mL, which corresponds to 25.9 mg/mL of the C₆₀ moiety. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3578–3585, 2000     

Supramolecular Architectures by Fullerene‐Bridged Bis(permethyl‐β‐cyclodextrin)s with Porphyrins

The Hirsch–Bingel reaction of bis{4‐methyl[1,2,3]triazolyl}malonic ester‐bridged bis(permethyl‐β‐cyclodextrin) 1 with C₆₀ has led to the formation of a new fullerene‐bridged bis(permethyl‐β‐cyclodextrin) 2 , which has been comprehensively characterized by NMR spectroscopy, MALDI‐MS, and elemental analysis. Taking advantage of the high affinity between 2 and 5,10,15,20‐tetrakis(4‐sulfonatophenyl)porphyrin ( 3 ) or [5,10,15,20‐tetrakis(4‐sulfonatophenyl)porphinato]zinc(II) ( 4 ), linear supramolecular architectures with a width of about 2 nm and a length ranging from hundreds of nanometers to micron dimension were conveniently constructed and fully investigated by transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM). Significantly, the photoinduced electron‐transfer (PET) process between porphyrin and C₆₀ moieties takes place within the 2 ? 3 and 2 ? 4 supramolecular architectures under light irradiation, leading to the highly efficient quenching of the porphyrin fluorescence. The PET process and the charge‐separated state were investigated by means of fluorescence spectroscopy, fluorescence decay, cyclic voltammetry, and nanosecond transient absorption measurements.     

Tether‐Directed Bisfunctionalization Reactions of C60 and C70

Four easily isolable regio‐ and stereoselective bis‐adducts of C₆₀ and C₇₀, as well as a new C₇₀‐dumbbell derivative, have been synthesized by using two different bismalonate tethered moieties. The derivatives that possess relatively long‐tethered moieties show highly symmetric addition patterns, as evidenced by spectroscopic measurements, whereas the derivatives possessing the shorter‐tethered moiety exhibit interesting addition patterns on C₆₀ and C₇₀.     

Precise Control of Intramolecular Charge‐Transport: The Interplay of Distance and Conformational Effects

A new series of donor–bridge–acceptor (D–B–A) compounds consisting of π‐conjugated oligofluorene (oFL) bridges between a ferrocene (Fc) electron‐donor and a fullerene (C₆₀) electron‐acceptor have been synthesized. In addition to varying the length of the bridge (i.e., mono‐ and bi‐fluorene derivatives), four different ways of linking ferrocene to the bridge have been examined. The Fc moiety is linked to oFL: 1) directly without any spacer, 2) by an ethynyl linkage, 3) by a vinylene linkage, and 4) by a p‐phenylene unit. The electronic interactions between the electroactive species have been characterized by cyclic voltammetry, absorption, fluorescence, and transient absorption spectroscopy in combination with quantum chemical calculations. The calculations reveal exceptionally close energy‐matching between the Fc and the oFL units, which results in strong electronic‐coupling. Hence, intramolecular charge‐transfer may easily occur upon exciting either the oFLs or Fcs. Photoexcitation of Fc–oFL–C₆₀ conjugates results in transient radical‐ion‐pair states. The mode of linkage of the Fc and FL bridge has a profound effect on the photophysical properties. Whereas intramolecular charge‐separation is found to occur rather independently of the distance, the linker between Fc and oFL acts (at least in oFL) as a bottleneck and significantly impacts the intramolecular charge‐separation rates, resulting in beta values between β_CS 0.08 and 0.19 Å^?1. In contrast, charge recombination depends strongly on the electron‐donor–acceptor distance, but not at all on the linker. A value of β_CR (0.35±0.01 Å^?1) was found for all the systems studied. Oligofluorenes prove, therefore, to be excellent bridges for probing how small structural variations affect charge transport in D–B–A systems.     

Energy‐Funneling‐Based Broadband Visible‐Light‐Absorbing Bodipy–C60 Triads and Tetrads as Dual Functional Heavy‐Atom‐Free Organic Triplet Photosensitizers for Photocatalytic Organic Reactions

C₆₀–bodipy triads and tetrads based on the energy‐funneling effect that show broadband absorption in the visible region have been prepared as novel triplet photosensitizers. The new photosensitizers contain two or three different light‐harvesting antennae associated with different absorption wavelengths, resulting in a broad absorption band (450–650 nm). The panchromatic excitation energy harvested by the bodipy moieties is funneled into a spin converter (C₆₀), thus ensuring intersystem crossing and population of the triplet state. Nanosecond time‐resolved transient absorption and spin density analysis indicated that the T₁ state is localized on either C₆₀ or the antennae, depending on the T₁ energy levels of the two entities. The antenna‐localized T₁ state shows a longer lifetime (τ_T=132.9 μs) than the C₆₀‐localized T₁ state (ca. 27.4 μs). We found that the C₆₀ triads and tetrads can be used as dual functional photocatalysts, that is, singlet oxygen (¹O₂) and superoxide radical anion (O₂ ^{. ?}) photosensitizers. In the photooxidation of naphthol to juglone, the ¹O₂ photosensitizing ability of the C₆₀ triad is a factor of 8.9 greater than the conventional triplet photosensitizers tetraphenylporphyrin and methylene blue. The C₆₀ dyads and triads were also used as photocatalysts for O₂ ^{. ?}‐mediated aerobic oxidation of aromatic boronic acids to produce phenols. The reaction times were greatly reduced compared with when [Ru(bpy)₃Cl₂] was used as photocatalyst. Our study of triplet photosensitizers has shown that broadband absorption in the visible spectral region and long‐lived triplet excited states can be useful for the design of new heavy‐atom‐free organic triplet photosensitizers and for the application of these triplet photosensitizers in photo‐organocatalysis.     

Charge Separation in Graphene‐Decorated Multimodular Tris(pyrene)–Subphthalocyanine–Fullerene Donor–Acceptor Hybrids

A new approach to probe the effect of graphene on photochemical charge separation in donor–acceptor conjugates is devised. For this, multimodular donor–acceptor conjugates, composed of three molecules of pyrene, a subphthalocyanine, and a fullerene C₆₀ ((Pyr)₃SubPc‐C₆₀), have been synthesized and characterized. These systems were hybridized on few‐layer graphene through π–π stacking interactions of the three pyrene moieties. The hybrids were characterized using Raman, HRTEM, and spectroscopic and electrochemical techniques. The energy levels of the donor–acceptor conjugates were fine‐tuned upon interaction with graphene and photoinduced charge separation in the absence and presence of graphene was studied by femtosecond transient absorption spectroscopy. Accelerated charge separation and recombination was detected in these graphene‐decorated conjugates suggesting that they could be used as materials for fast‐responding optoelectronic devices and in light energy harvesting applications.     

Photophysical characteristics of soluble oligo(p‐phenylenevinylene)–fullerene dyad

The fact that C₆₀ is a good acceptor has stimulated interest in covalently linked complexes, including polymers and oligomers. Photoinduced charge transfer in these systems has great potential for use in photovoltaic devices. In this study, an alternating conjugated oligomer of alkylated carbazole and dialkoxyl‐substituted phenylene, with pendant C₆₀ moieties, (PPV‐AFCAR) was prepared and characterized. The excited‐state properties of PPV–AFCAR were investigated with steady‐state spectroscopy and lifetime measurements. After photoexcitation, photoinduced energy transfer from the oligomer chain to the pendant moiety occurred in great proportion, but a charge‐separation process did not. Whether the energy‐transfer process was measurable or not depended on the system temperature. At 77 K, a quantum yield of more than 50% for energy transfer was found by the fitting of a linear combination of the excitation spectra of the precursor oligomer, the alternating conjugated oligomer of alkylated carbazole and dialkoxyl‐substituted phenylene PPV–ACAR, and the absorption spectra of C₆₀. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3981–3988, 2001     

Fullerol–Titania Charge‐Transfer‐Mediated Photocatalysis Working under Visible Light

The development of visible‐light‐active photocatalysts is being investigated through various approaches. In this study, C₆₀‐based sensitized photocatalysis that works through the charge transfer (CT) mechanism is proposed and tested as a new approach. By employing the water‐soluble fullerol (C₆₀(OH)_x) instead of C₆₀, we demonstrate that the adsorbed fullerol activates TiO₂ under visible‐light irradiation through the “surface–complex CT” mechanism, which is largely absent in the C₆₀/TiO₂ system. Although fullerene and its derivatives have often been utilized in TiO₂‐based photochemical conversion systems as an electron transfer relay, their successful photocatalytic application as a visible‐light sensitizer of TiO₂ is not well established. Fullerol/TiO₂ exhibits marked visible photocatalytic activity not only for the redox conversion of 4‐chlorophenol, I^?, and Cr^VI, but also for H₂ production. The photoelectrode of fullerol/TiO₂ also generates an enhanced anodic photocurrent under visible light as compared with the electrodes of bare TiO₂ and C₆₀/TiO₂, which confirms that the visible‐light‐induced electron transfer from fullerol to TiO₂ is particularly enhanced. The surface complexation of fullerol/TiO₂ induced a visible absorption band around 400–500 nm, which was extinguished when the adsorption of fullerol was inhibited by fluorination of the surface of TiO₂. The transient absorption spectroscopic measurement gave an absorption spectrum ascribed to fullerol radical cations (fullerol^.+) the generation of which should be accompanied by the proposed CT. The theoretical calculation regarding the absorption spectra for the (TiO₂ cluster+fullerol) model also confirmed the proposed CT, which involves excitation from HOMO (fullerol) to LUMO (TiO₂ cluster) as the origin of the visible‐light absorption.     

High‐Potential Perfluorinated Phthalocyanine–Fullerene Dyads for Generation of High‐Energy Charge‐Separated States: Formation and Photoinduced Electron‐Transfer Studies

High oxidation potential perfluorinated zinc phthalocyanines (ZnF_nPcs) are synthesised and their spectroscopic, redox, and light‐induced electron‐transfer properties investigated systematically by forming donor–acceptor dyads through metal–ligand axial coordination of fullerene (C₆₀) derivatives. Absorption and fluorescence spectral studies reveal efficient binding of the pyridine‐ (Py) and phenylimidazole‐functionalised fullerene (C₆₀Im) derivatives to the zinc centre of the F_nPcs. The determined binding constants, K, in o‐dichlorobenzene for the 1:1 complexes are in the order of 10⁴ to 10⁵ M ^?1; nearly an order of magnitude higher than that observed for the dyad formed from zinc phthalocyanine (ZnPc) lacking fluorine substituents. The geometry and electronic structure of the dyads are determined by using the B3LYP/6‐31G* method. The HOMO and LUMO levels are located on the Pc and C₆₀ entities, respectively; this suggests the formation of ZnF_nPc^.+–C₆₀Im^.? and ZnF_nPc^.+–C₆₀Py^.? (n=0, 8 or 16) intra‐supramolecular charge‐separated states during electron transfer. Electrochemical studies on the ZnPc–C₆₀ dyads enable accurate determination of their oxidation and reduction potentials and the energy of the charge‐separated states. The energy of the charge‐separated state for dyads composed of ZnF_nPc is higher than that of normal ZnPc–C₆₀ dyads and reveals their significance in harvesting higher amounts of light energy. Evidence for charge separation in the dyads is secured from femtosecond transient absorption studies in nonpolar toluene. Kinetic evaluation of the cation and anion radical ion peaks reveals ultrafast charge separation and charge recombination in dyads composed of perfluorinated phthalocyanine and fullerene; this implies their significance in solar‐energy harvesting and optoelectronic device building applications.     

Host–Guest Complexation of [60]Fullerenes and Porphyrins Enabled by “Click Chemistry”

Herein the synthesis, characterization, and organization of a first‐generation dendritic fulleropyrrolidine bearing two pending porphyrins are reported. Both the dendron and the fullerene derivatives were synthesized by Cu^I‐catalyzed alkyne–azide cycloaddition (CuAAC). The electron‐donor–acceptor conjugate possesses a shape that allows the formation of supramolecular complexes by encapsulation of C₆₀ within the jaws of the two porphyrins of another molecule. The interactions between the two photoactive units (i.e., C₆₀ and Zn–porphyrin) were confirmed by cyclic voltammetry as well as by steady‐state and time‐resolved spectroscopy. For example, a shift of about 85 mV was found for the first reduction of C₆₀ in the electron‐donor–acceptor conjugate compared with the parent molecules, which indicates that C₆₀ is included in the jaws of the porphyrin. The fulleropyrrolidine compound exhibits a rich polymorphism, which was corroborated by AFM and SEM. In particular, it was found to form supramolecular fibrils when deposited on substrates. The morphology of the fibrils suggests that they are formed by several rows of fullerene–porphyrin complexes.     

Organic–Inorganic Azafullerene‐Gold C59N‐Au Nanohybrid: Synthesis,Characterization, and Properties

Azafullerene (C₅₉N) was functionalized using a Mannich‐type reaction and then subsequently condensed with lipoic acid to yield dithiolane‐modified C₅₉N. In the following step, the extended dithiolane moiety from the C₅₉N core was utilized to decorate the azafullerene sphere with gold nanoparticles (Au NPs). The latter were initially stabilized with dodecanothiol (DT ? Au) and then integrated on azafullerene through a ligand exchange reaction with the dithiolane‐functionalized C₅₉N to produce the C₅₉N/DT ? Au nanohybrid. The nanohybrid was fully characterized by spectroscopy and microscopy, revealing the formation of spherical nanoparticles with a diameter in the range of 2–5 nm, as imaged by HR‐TEM. In the electronic absorption spectrum of C₅₉N/DT ? Au nanohybrid, the characteristic surface plasmon band (SPB) of Au NPs was observed, however, it was redshifted compared with that of DT ? Au. The redshift of the SPB is indicative of closer interparticle proximity of Au NPs, in accordance with the formation of aggregated NPs as observed by TEM, in C₅₉N/DT ? Au nanohybrid. Excited‐state interactions in C₅₉N/DT ? Au were probed by photoluminescence assays. It was found that the weak emission of C₅₉N at 819 nm was blueshifted by 14 nm in C₅₉N/DT ? Au, but was stronger in intensity, thus suggesting energy transfer to C₅₉N, within the organic–inorganic C₅₉N/DT ? Au nanohybrid. Finally, with the aid of pump–probe measurements and transient absorption spectroscopy, the formation of the singlet excited state of C₅₉N was identified.     

Remarkably Efficient Photocurrent Generation Based on a [60]Fullerene–Triosmium Cluster/Zn–Porphyrin/Boron–Dipyrrin Triad SAM

A new artificial photosynthetic triad array, a [60]fullerene–triosmium cluster/zinc–porphyrin/boron–dipyrrin complex ( 1 , Os₃C₆₀/ZnP/Bodipy), has been prepared by decarbonylation of Os₃(CO)₈(CN(CH₂)₃Si(OEt)₃)(μ₃‐η²:η²:η²‐C₆₀) ( 6 ) with Me₃NO/MeCN and subsequent reaction with the isocyanide ligand CNZnP/Bodipy ( 5 ) containing zinc porphyrin (ZnP) and boron dipyrrin (Bodipy) moieties. Triad 1 has been characterized by various spectroscopic methods (MS, NMR, IR, UV/Vis, photoluminescence, and transient absorption spectroscopy). The electrochemical properties of 1 in chlorobenzene (CB) have been examined by cyclic voltammetry; the general feature of the cyclic voltammogram of 1 is nine reversible one‐electron redox couples, that is, the sum of those of 5 and 6 . DFT has been applied to study the molecular and electronic structures of 1 . On the basis of fluorescence‐lifetime measurements and transient absorption spectroscopic data, 1 undergoes an efficient energy transfer from Bodipy to ZnP and a fast electron transfer from ZnP to C₆₀; the detailed kinetics involved in both events have been elucidated. The SAM of triad 1 ( 1 /ITO; ITO=indium–tin oxide) has been prepared by immersion of an ITO electrode in a CB solution of 1 and diazabicyclo‐octane (2:1 equiv), and characterized by UV/Vis absorption spectroscopy, water contact angle, X‐ray photoelectron spectroscopy, and cyclic voltammetry. The photoelectrochemical properties of 1 /ITO have been investigated by a standard three‐electrode system in the presence of an ascorbic acid sacrificial electron donor. The quantum yield of the photoelectrochemical cell has been estimated to be 29 % based on the number of photons absorbed by the chromophores. Our triad 1 is unique when compared to previously reported photoinduced electron‐transfer arrays, in that C₆₀ is linked by π bonding with little perturbation of the C₆₀ electron delocalization.     

Organometallic Polyelectrolytes: Synthesis,Characterization and Layer‐By‐Layer Deposition of Cationic Poly(ferrocenyl(3‐ammoniumpropyl)‐methylsilane)

The water soluble poly(ferrocenylsilane) polycation, poly(ferrocenyl(3‐ammoniumpropyl)methylsilane), was synthesized by transition metal‐catalyzed ring‐opening polymerization of the novel [1]ferrocenophane Fe(η‐C₅H₄)₂SiCH₃(CH₂)₃Cl and by subsequent side group modification. Amination of the chloropropyl moieties using potassium 1,1,3,3‐tetramethyldisilazide followed by acidic hydrolysis produced the polycation. The polycation was employed together with poly(sodium vinylsulfonate) in the electrostatic layer‐by‐layer self‐assembly process to form organometallic multilayers on quartz. The multilayer fabrication process was monitored using UV/Vis absorption spectroscopy and XPS.     

Structure‐Dependent Photoinduced Electron Transfer in Fullerodendrimers with Light‐Harvesting Oligophenylenevinylene Terminals

Oligophenylenevinylene (OPV)‐terminated phenylenevinylene dendrons G1 – G4 with one, two, four, and eight “side‐arms”, respectively, were prepared and attached to C₆₀ by a 1,3‐dipolar cycloaddition of azomethine ylides generated in situ from dendritic aldehydes and N‐methylglycine. The relative electronic absorption of the OPV moiety increases progressively along the fullerodendrimer family C₆₀G1 – C₆₀G4 , reaching a 99:1 ratio for C₆₀G4 (antenna effect). UV/Vis and near‐IR luminescence and transient absorption spectroscopy was used to elucidate photoinduced energy and electron transfer in C₆₀G1 – C₆₀G4 as a function of OPV moiety size and solvent polarity (toluene, dichloromethane, benzonitrile), taking into account the fact that the free‐energy change for electron transfer is the same along the series owing to the invariability of the donor–acceptor couple. Regardless of solvent, all the fullerodendrimers exhibit ultrafast OPV→C₆₀ singlet energy transfer. In CH₂Cl₂, the OPV→C₆₀ electron transfer from the lowest fullerene singlet level (¹C₆₀*) is slightly exergonic (ΔG_CS≈0.07 eV), but is observed, to an increasing extent, only in the largest systems C₆₀G2 – C₆₀G4 with lower activation barriers for electron transfer. This effect has been related to a decrease of the reorganization energy upon enlargement of the molecular architecture. Structural factors are also at the origin of an unprecedented OPV→C₆₀ electron transfer observed for C₆₀G3 and C₆₀G4 in apolar toluene, whereas in benzonitrile, electron transfer occurs in all cases. Monitoring of the lowest fullerene triplet state by sensitized singlet oxygen luminescence and transient absorption spectroscopy shows that this level is populated through intersystem crossing and is not involved in photoinduced electron transfer.     

Synthesis and properties of oligo(biradicals) composed of 1,3‐diphosphacyclobutane‐2,4‐diyl units and benzyl‐type linkers

We have succeeded in catenating two sterically encumbered 1,3‐di‐t‐butyl‐2,4‐bis(2,4,6‐tri‐t‐butylphenyl)‐1,3‐diphosphacyclobutane‐2,4‐diyl units with a spacer 1,2‐(CH₂)₂C₆H₄ to obtain bis(biradicals) as considerably stable compounds. We have discussed physicochemical properties of the dimer, together with DFT calculations of model compounds. Spectroscopic data, redox properties, and X‐ray structures of the oligo(biradicals) derivatives including other spacers like 1,3‐(CH₂)₂C₆H₄, 1,4‐(CH₂)₂C₆H₄, and 1,3,5‐(CH₂)₃C₆H₃, reveal that the P‐heterocyclic biradical moieties interact through nonconjugative pathways. These properties of oligo(biradicals) will facilitate to design novel molecular systems for electronics. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:404–411, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20625     

Modular Covalent Graphene Functionalization with C60 and the Endohedral Fullerene Sc3N@C80: A Facile Entry to Synthetic‐Carbon‐Allotrope Hybrids

Two novel graphene‐fullerene hybrid structures, containing C₆₀ and endohedral Sc₃N@C₈₀ bound to graphene, instead of the formerly used graphene oxide, were efficiently synthesized via a reductive activation/exfoliation approach starting from pristine graphite. The structures of these multifunctional hybrid systems were unambiguously characterized by statistical Raman spectroscopy, TG‐MS, TG‐GC‐MS, and LD‐TOF mass spectroscopy, confirming the covalent bonding of the respective C₆₀/Sc₃N@C₈₀ moieties to the pristine graphene. Furthermore, assisted by temperature‐dependent Raman spectroscopy studies the corresponding defunctionalization processes were also investigated. Finally, the formation of a carbon allotrope hybrid material on the basis of C₆₀/Sc₃N@C₈₀ moieties coupled to graphene could be visualized by HRTEM.