Substituent Effects on Binding Constants of Carotenoids to n-Heptane/AOT Reverse Micelles

The absorption spectra of 6′-apo-β-caroten-6′-ol (1), 6′-apo-β-caroten-6′-oic acid (2), and ethyl 6′-apo-β-caroten-6′-oate (3) were analyzed in homogeneous media and in reversed micelles of AOT (sodium 1,4-bis(2-ethylhexyl) sulfosuccinate) in n-heptane. The possible solute–solvent interactions of these compounds were analyzed in pure solvents by Taft and Kamlet's solvatochromic comparison method. These carotenoids show sensitivity similar to that of medium polarity-polarizability as measured by π*. Moreover, the absorption spectra of carotenoid 3 and to much less extent carotenoid 2 display broadening of the visible bands induced by polar solvents characteristic of carotenoids that contain a carbonyl functional group in conjugation with the carbon–carbon π-electron system. They are also sensitive to the ability of the solvent to accept protons in a hydrogen bond interaction measured by β. This sensitivity follows the expected order: 2>1>3. In the reverse micellar system, while the spectra for 3 remain unchanged, the intensity of the absorption band characteristic of n-heptane for 1 and 2 decreases as the AOT concentration increases, and a new band develops. This new band is attributed to the solute bound to the micelle interface. These changes allowed us to determine the binding constant (K_b) between these compounds and AOT. At W₀=[H₂O]/[AOT]=0 the values of K_b of 326±5 and 6.2±0.3 were found for the acid 2 and the alcohol 1, respectively. The strength of binding is interpreted considering their hydrogen-bond donor ability and the solubility in the organic pseudophase. For 1K_bdecreases as W₀ is increased, while for 2 no variation was observed. These effects are discussed in terms of carotenoid–water competition for interfacial binding sites.     

Influence of Sodium Periodate and Tyrosinase on Binding of Alginate to Adlayers of Mytilus edulis Foot Protein 1

Mytilus edulis foot protein 1 (Mefp-1) is the most well-characterized component of this sea mussel's adhesive plaque. The plaque is a condensed, heterogeneous mixture consisting of a large proportion of cross-linked biopolymers that bonds the mussel to a chosen mooring. Mefp-1 is densely populated with lysine and -3,4-dihyroxyphenylalanine ( -dopa) residues incorporated into a repeating amino acid sequence motif. It has been proposed that one plaque cross-linking reaction is the nucleophilic addition of the ε-amino groups of the lysine residues into the oxidized catechol (o-diphenol) functionality (quinone) of the -dopa residues. In order to determine if this reaction occurs in adlayers of Mefp-1, a previously developed assay for ε-amino groups was applied. Adlayers of Mefp-1 were exposed to an oxidant, either the enzyme, mushroom tyrosinase, or sodium periodate. Binding of alginate to adlayers was used to probe for accessibility of ε-amino groups. It was found that lysine residues lose the ability to bind alginate after exposure to sodium periodate, but that this loss is not clearly due to a reaction with -dopa residues. There is a slight decrease of binding of alginate to adlayers of Mefp-1 exposed to either active or thermally deactivated mushroom tyrosinase, probably due to the obstruction of binding sites by bound enzyme. Adsorption kinetics of mushroom tyrosinase onto adlayers of Mefp-1 for active and thermally inactivated enzyme were nearly identical. Attenuated total reflection Fourier transform infrared spectroscopy was used to characterize these interactions at a germanium (Ge) interface.     

Electroacoustic and Potentiometric Studies of the Hematite/Water Interface

The basic charging properties of nearly spherical hematite particles were studied by using potentiometric titration and the electroacoustic technique. Both the pH and the ionic strength dependence of the surface charge and the ζ-potential were studied in detail. For calculating the ζ-potential from mobility data a few different theories were used and obtained differences are discussed. At pH values higher than 7 and at high electrolyte concentrations (50 mM and 100 mM NaNO₃), it was difficult to fit the mobility data by using the full mobility spectra including both magnitude and phase angle at several frequencies. In this regime the best fits were obtained by using a theory for aggregated complexes (porous particles). From potentiometric titrations in 0.01, 0.1, and 1.0 M NaNO₃, parameters for a 1-pK Basic Stern Model were determined. The model was used to examine the possibility of correlating the experimentally determined ζ-potentials to the model-calculated potentials at the Stern plane. Qualitatively, the model predicted the correct ionic strength dependence of the ζ-potentials, and there was also a rather good quantitative agreement at high ionic strengths (50 and 100 mM NaNO₃). However, at lower ionic strengths the model predicted values up to 40% higher than those found from the electroacoustic study. Surface conduction behind the slip plane was discussed as a possible cause for this discrepancy.     

Electrooptics of β-FeOOH Particles in Aqueous Media: 1. Reversing-Pulse Electric Birefringence in the Low Field Region

Reversing-pulse electric birefringence (RPEB) of a nearly monodisperse iron(III) hydroxide oxide sample in the β-form (β-FeOOH) was measured at 25°C and at a wavelength of 633 nm in aqueous media in the presence of NaCl. The concentrations of β-FeOOH and added NaCl varied between 0.00111 and 0.0555 g/L and 0.03 and 2.0 mM, respectively. Except for the suspensions with high salt concentrations, each RPEB signal showed a dip or minimum in the reverse process upon electric field reversal, together with a smooth rise in the buildup and a fall in the decay process. The observed signals were analyzed with a new RPEB theory, which takes into account not only the permanent electric dipole moment (μ) but also the root-mean-square ionic dipole moment (m^21/2) due to the ion fluctuation in ion atmosphere, in addition to the field-induced electronic (covalent) dipole moment Δα′ E. The results showed that the slowly fluctuating moment of m^21/2 is by far the most predominant one for the field orientation of the β-FeOOH particle, though the permanent dipole moment μ may not be completely excluded. The rotational relaxation time of the whole particle was evaluated from the decay signal, while the relaxation time for fluctuating ions was estimated from RPEB signal fitting. The sign of the steady-state birefringence for β-FeOOH suspensions was positive without exception under the present conditions. The birefringence signals in the steady state (δ/d) were proportional to the second power of the applied field strength (E) in the low field region; thus, the Kerr law was verified to hold for β-FeOOH suspensions. The specific Kerr constant was evaluated for each suspension by extrapolating the values of δ/d to zero field (E→0).     

Molecular Interactions in Mixed Monolayers of Octadecanoic Acid and Three Related Amphiphiles

Binary mixed monolayers of octadecanoic acid and three related amphiphilic compounds (octadecanamide, octadecylamine, octadecylurea) have been investigated at the air/water interface by surface pressure–area (Π–Â) isotherms and their resistances to water evaporation (r). In addition, the excess free energies of mixing (ΔG^E) were calculated using the Goodrich method. Both the ln r vs x and ΔG^E vs x plots exhibit marked deviations from linearity, indicating a high degree of miscibility and nonideal behavior of the components in the mixed films. For all of these binary systems the excess free energies of mixing have been found to be minimum for a certain composition corresponding almost to a maximum in evaporation resistances. Weak interactions were detected in octadecanoic acid/octadecanamide monolayers, whereas significant condensation effects were observed in 1 : 1 mixed films containing octadecanoic acid and octadecylamine. This is attributed to an acid–base equilibrium followed by the formation of a well-ordered arrangement of COO⁻ and NH₃⁺ head groups bound to each other by electrostatic forces. The unusual polymorphism of octadecylurea monolayers could be influenced by adding small amounts of octadecanoic acid. The formation of the low-temperature phase (β-phase) is completely suppressed, if the acid content exceeds 8 mol%. The octadecanoic acid seems to induce the formation of the high-temperature phase (α-phase), which is characterized by a vertical orientation of the hydrocarbon chains.     

Adsorption of 1,4-Benzenedithiol on Gold and Silver Surfaces: Surface-Enhanced Raman Scattering Study

The adsorption behavior of 1,4-benzenedithiol (1,4-BDT) on colloidal gold and silver surfaces has been investigated by means of surface-enhanced Raman scattering (SERS). 1,4-BDT chemisorbed dissociatively on both gold and silver surfaces but as mono- and dithiolate, respectively. Regardless of the bulk concentration of 1,4-BDT, only a monolayer was assembled on the silver surface with a flat orientation by forming two Ag–S bonds. On the gold surface, the monothiolate species,1,4-BDT⁻¹, appeared to assume a rather flat orientation at a very low surface coverage, but as the surface coverage was increased, the adsorbate took a perpendicular orientation. Furthermore, when the bulk concentration of 1,4-BDT was close to that required for a full-monolayer coverage limit, a band assignable to the S–S stretching vibration appeared at 536 cm⁻¹ in the gold sol SERS spectra. A separate ellipsometry measurement performed with vacuum-evaporated gold substrates revealed that up to tetralayers could be assembled on gold in 1 mM n-hexane solution of 1,4-BDT while at best a bilayer formed in either methanol or ethanol solution. The different adsorbate structure of 1,4-BDT on gold and silver was overall quite comparable to that of p-xylene-α,α′-dithiol.     

Effect of β-Cyclodextrin on the Photoinduced Charge Transfer in Sodium 1-Anilino-8-naphthalene Sulfate (ANS)/CdS Colloidal System

The S-center radical (ANS^·) of sodium 1-anilino-8-naphthalene sulfate (ANS) generated by photoinduced charge transfer in ANS/CdS and ANS/CdS/β-cyclodextrin(β-CD) systems has been studied by using spin trapping electron spin resonance techniques, UV-visible spectroscopic methods, and fluorescence spectroscopic methods. It was found that the S-centered radical (ANS^·) was produced by the charge transfer reaction between the ground state ANS and the positive hole h⁺(CdS) from the valence band of CdS colloids, by the charge transfer from the excited singlet state ¹ANS* to the conduction band of CdS colloids, or by both in the ANS/CdS and ANS/CdS/β-CD systems. The ESR signal intensity of the spin adduct (5,5′-dimethyl-1-pyrroline-N-oxide (DMPO)–ANS)^·, which is formed from ANS^· trapped by DMPO, in the latter system is 15 times stronger than that in the former system. The apparent association constants between ANS and CdS colloids in the absence and presence of β-CD determined from fluorescence quenching experiments are 1097 and 1606 M⁻¹, respectively. From ESR and fluorescence results, it is estimated that the efficiency of photoinduced charge transfer from ANS to CdS colloids in the ANS/CdS/β-CD system is 12.5 times that in the ANS/CdS system.     

Formation and Characterization of Reversed Micelles Composed of Phospholipids and Fatty Acids

The formation of reversed micellar systems composed of phosphatidylcholine (PC) and fatty acid was newly demonstrated by a significant increase in water content in the organic ethyl oleate phase when the micelles were prepared by the contact method. The solubilized water concentration in the reversed micellar organic phase reached 3 wt%. The new systems are expected to be used as highly biocompatible reversed micellar systems. The structure of the reversed micelles composed of PC and oleic acid was characterized by determining the water concentration and by small-angle X-ray scattering analysis. The reversed micelles composed of PC and oleic acid formed in ethyl oleate were spherical. The radius of gyration was between 30 and 50 Å. The size of the reversed micelles decreased with an increase in the oleic acid concentration and was independent of the PC concentration. Experimental results indicated that the structure of the reversed micellar system was determined by the oleic acid concentration. An increase in the PC concentration caused an increase in the number of reversed micelles of the same size. These reversed micellar systems are expected to be used as solubilization media in pharmaceutical and food industries because they are not toxic.     

Wetting Study of Hydrophobic Membranes via Liquid Entry Pressure Measurements with Aqueous Alcohol Solutions

A new concept of liquid entry pressure measurements is applied to study the hydrophobicity of microporous membranes for aqueous alcohol solutions. The effects of alcohol concentration, type of alcohol, and temperature on liquid entry pressure of the membrane have been studied. Two theoretical equations for the determination of membrane pore size have been proposed. The former equation was developed taking into account the deviation from the Laplace–Young equation due to the membrane structure by means of the structure angle. The latter equation was established considering only the range of alcohol concentration in which the dispersion component of liquid surface tension remains practically constant. Hydrophobicity has been expressed in terms of wetting surface tension, γ_L^w. Based on these measurements, the maximum concentration before the spontaneous wetting occurs would be predicted.     

Effects of Nonionic and Mixed Cationic-Nonionic Micelles on the Rate of Alkaline Hydrolysis of 4-Nitrophthalimide

Pseudo-first-order rate constants (k_obs) for alkaline hydrolysis of 4-nitrophthalimide show a monotonic decrease with increase in [C₁₂E₂₃]_T (total concentration of Brij 35) at constant [CH₃CN] and [NaOH]. This micellar effect is explained in terms of a pseudophase micelle model. The rate of hydrolysis becomes too slow to monitor at [C₁₂E₂₃]_T≥0.03 M in the absence of cetyltrimethylammonium bromide (CTABr) and at [C₁₂E₂₃]_T≥0.04 M in the presence of 0.006–0.02 M CTABr at 0.01 M NaOH. The plots of k_obs versus [C₁₂E₂₃]_T show minima at 0.006 and 0.01 M CTABr, while such a minimum is not visible at 0.02 M CTABr.     

Silylating Agents Grafted onto Silica Derived from Leached Chrysotile

Silica from leached chrysotile fibers (SILO) was silanized with trialkoxyaminosilanes to yield inorganic–organic hybrids designated SILx (x=1–3). The greatest amounts of the immobilized agents were quantified as 2.14, 1.90, and 2.18 mmol g⁻¹ on SIL1, SIL2, and SIL3 for –(CH₂)₃NH₂,–(CH₂)₃NH(CH₂)₂NH₂, and –(CH₂)₃NH(CH₂)₂NH(CH₂)₂NH₂ groups attached to the inorganic support. The infrared spectra for all modified silicas showed the absence of the Si–OH deformation mode, originally found at 950 cm⁻¹, and the appearance of asymmetric and symmetric C–H stretching bands at 2950 and 2840 cm⁻¹. Other important bands associated with the organic moieties were assigned to ν_as(NH) at 3478 and ν_sym(NH) at 3418 cm⁻¹. The NMR spectrum of the solid precursor material suggested two different kinds of silicon atoms: silanol and siloxane groups, between −90 and 110 ppm; however, additional species of silicon that contain the organic moieties bonded to silicon at −58 and −66 ppm appeared after chemical modification. These modified silicas showed a high adsorption capacity for cobalt and copper cations in aqueous solution, in contrast to the original SILO matrix, confirming the unequivocal anchoring of silylating agents on the silica surface.     

Nitrogen Adsorption Studies of PAN-Based Activated Carbon Fibers Prepared by Different Activation Methods

Polyacrylonitrile (PAN)-based activated carbon fibers (ACFs) prepared by various activation methods were characterized using low-temperature nitrogen adsorption over a wide relative pressure from 10⁻⁶ to 1. Nitrogen adsorption is a standard tool for determination of porous structure parameters. In the present work, we carried out extensive adsorption studies of a series of PAN-ACFs activated by different methods. It was shown that the high-resolution α_S plot provided valuable information about structural properties of samples under study. The pore size distributions of samples under study were calculated by employing the regularization method according to density functional theory. By these analyses, the pore development and the dominant pores of samples prepared by different methods can be clearly observed. Moreover, the adsorption measurement could provide profound insight into the structural heterogeneity of the ACFs.     

Aggregation and Polymerization of PEG-Based Macromonomers with Methacryloyl Group as the Only Hydrophobic Segment

Aggregation behavior in aqueous solution of a series of poly (ethylene glycol) (PEG)-based macromonomers with methacryloyl group as the only hydrophobic segment has been investigated using surface tension, steady-state and time-resolved fluorescence spectroscopy using pyrene as a probe, and small-angle neutron scattering techniques. The general formula of these macromonomers is CH₂=C(CH₃)–CO–O–E_m–CH₃, where E is the ethylene glycol unit and m=8 (ME₈), 18 (ME₁₈), 49 (ME₄₉), and 120 (ME₁₂₀). The results indicate that a macromonomer with 8 ethylene glycol units forms as an aggregate above a certain critical concentration, which can be defined as critical aggregation concentration. The observed high value of I₁/I₃ in pyrene emission spectra at the interface of these aggregates and the inability to scatter a neutron beam by these aggregates indicate that the hydrophobic cluster formed by this macromonomer is remarkably solvated. ME₁₈ has a tendency to aggregate but others do not form any hydrophobic cluster. The homopolymerization behaviors of these macromonomers in an aqueous medium at 70°C are consistent with these possibi- lities.     

Thermodynamics of micellization of alkyldimethylbenzylammonium chlorides in aqueous solutions

Specific conductivities of alkyldimethylbenzylammonium chlorides (alkyl=decyl-, dodecyl-, tetradecyl-, and hexadecyl-) in aqueous solutions were measured as a function of molality and temperature. Critical micelle molalities (cmc) and degrees of ionization of the micelles, beta, were estimated from the dependence of the specific conductivity on molality. It was found that temperature dependence of cmc is U-shaped with a minimum shifting toward higher temperatures with a decrease in the chain length of the alkyl group. The temperature dependence of ln xcmc (where xcmc is the cmc in mole fraction units) was fitted to the equation of Muller, which we modified by taking into account the temperature dependencies both of beta and of change in heat capacity upon micellization. From the fitting parameters, Gibbs free energies, enthalpies, and entropies of micellization as a function of temperature were estimated.     

Light Scattering Study of Turbid Heat-Set Globular Protein Gels Using Cross-Correlation Dynamic Light Scattering

The structure factor of aqueous solutions of the globular protein β-lactoglobulin was determined as a function of heating time at 76°C. We show how the effect of multiple scattering on the scattered light intensity can be effectively corrected using cross-correlation dynamic light scattering even if the transmission is only 1%. The structure factor of aggregated and gelled proteins can be described by the Ornstein–Zernike equation. The system is characterized by a correlation length that increases with heating time and stabilizes some time after the gel is formed. The correlation length of the protein gels decreases with decreasing concentration. Measurements after progressive dilution of a sample close to the gel point showed that the protein aggregates are initially interpenetrated and disinterpenetrate upon dilution.     

Activity and kinetics studies of yeast alcohol dehydrogenase in a reverse micelle formulated from functional surfactants

Yeast alcohol dehydrogenase (YADH) showed substantial decrease in its catalytic activity due to the strong electrostatic interaction between the head groups of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) and YADH in AOT reverse micelles. However, the catalytic activity of YADH in a nonionic reverse micellar interface (GGDE/TX-100) obtained from a functional nonionic surfactant N-gluconyl glutamic acid didecyl ester (GGDE) and Triton X-100 (TX-100) was higher than that in AOT reverse micelle under the respective optimum conditions. A comparison of the kinetic parameters showed that the turnover number k_cat in GGDE/TX-100 reverse micelle was 1.4 times as large as that in AOT reverse micelle, but the Michaelis constants in AOT reverse micelle for ethanol K_m^B was twice and for coenzyme NAD⁺ K_m^A was 5 times higher than their counterparts in GGDE/TX-100 reverse micelle. For the conversion of ethanol, the smaller K_m^B and larger k_cat in GGDE/TX-100 reverse micelle resulted in higher catalytic efficiency k_cat/K_m^B. The stability of YADH in GGDE/TX-100 reverse micelle was also found to be better than that in AOT reverse micelle. They were mainly attributed to the absence of electric charge on the head groups of GGDE and TX-100 in the GGDE/TX-100 reverse micelle.      

Interactions between Poly(ethylene oxide) and Sodium Alkylcarboxylates As Studied by Conductivity and Gel Permeation Chromatography

The interactions between PEO and sodium alkylcarboxylates (octyl, decyl, and dodecyl) have been investigated by conductivity measurements and gel permeation chromatography (GPC). Also included in the study was sodium dodecyl sulfate. From the conductivity measurements the critical aggregation concentration, ionization degree, and binding ratios were determined; the binding ratio was also determined from GPC. PEO–surfactant interactions were observed for all the studied surfactants, except sodium octanoate. For the polymer–surfactant complexes the ionization degree was in all cases observed to be about 0.2 higher than the ionization degree for the corresponding aqueous micelles. Further, the binding ratio decreased somewhat with decreasing chain length of the alkylcarboxylate. The Gibbs free energy showed that the polymer–surfactant interaction decreases with decreasing chain length of the alkylcarboxylates and is weaker for alkylcarboxylate compared to alkylsulfate of similar chain length.     

Electronic Properties of Q-CdS Clusters Stabilized by Adenine

Adenine-capped Q-CdS has been synthesized in an aqueous medium. IR spectroscopy indicates an interaction between Q-CdS and adenine through Cd²⁺. The amount of adenine controls the size of the clusters. A typical 5×10⁻³ mol dm⁻³ of adenine produces nanoclusters having the onset of absorption and an emission band at 2.8 and 2.35 eV, respectively. Adenine binds to the shallower traps and enhances the emission intensity of the 530-nm band without causing any shift in emission. Thermolysis of these colloids leads to the production of larger CdS clusters with changed electronic properties. Relaxation kinetics of charge carriers shows their average lifetime to increase with a decrease in particle size. Illumination of these particles does not lead to their photodissolution. This catalyst is, however, photoactive. The addition of indole causes the quenching of its emission. The photocatalytic oxidation of indole produces indigo with a quantum efficiency of 0.03.     

Peptide β-Bend and 3 10 -Helix: from 3D-Structural Studies to Applications as Templates

The 3 ₁₀-helix is a relatively common secondary structure motif in peptides and proteins. Its building block is one of various types of β-bend conformation which comprises an N ^α-acylated dipeptide alkylamide system. A complete 3D-structural characterization of this ternary helix has been achieved, thus allowing its unambiguous discrimination from the closely related α-helix. Recent applications of rigidified peptide β-bends and 3 ₁₀-helices as templates for investigations in synthetic organic chemistry (macrocyclization, catalysis), host–guest chemistry (molecular recognition), and physical chemistry (donor–acceptor interaction) will be discussed.