Determination of pharmaceuticals,steroid hormones,and endocrine-disrupting personal care products in sewage sludge by ultra-high-performance liquid chromatography–tandem mass spectrometry

A sensitive method has been developed and validated for the determination of diverse groups of pharmaceuticals, steroid hormones, and hormone-like personal care products in sewage sludge. Samples were extracted by ultrasonic-assisted extraction followed by solid-phase extraction cleanup. For determination of estrogens and hormone-like phenolic compounds, sample extracts were further derivatized with dansyl chloride and purified with silica gel column chromatography to improve the analytical sensitivity. The chemicals were determined by ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS) in multiple-reaction monitoring mode. Recoveries ranged mostly from 63% to 119% with relative standard deviations within 15%. Method quantification limits were 0.1–3 ng g⁻¹ dry weight (dw) for sewage sludge. The method was applied to a preliminary investigation of pharmaceuticals and personal care products (PPCPs) in sewage sludge and sediment in the Pearl River Delta, South China. Triclosan, triclocarban, 2-phenylphenol, bisphenol A, and parabens were ubiquitously detected at 3.6–5088.2 ng g⁻¹ dw in sludge and 0.29–113.1 ng g⁻¹ dw in sediment samples, respectively. Estrone, carbamazepine, metoprolol, and propranolol were also frequently quantified in the sludge and sediment samples. The dewatering process caused no significant losses of these PPCPs in sewage sludge.     

Simultaneous determination of fluoroquinolone and tetracycline antibacterials in sewage sludge using ultrasonic-assisted extraction and HPLC-MS/MS

A reliable method was proposed for the simultaneous determination of five fluoroquinolones (FQs) and two tetracyclines (TCs) in sewage sludge using ultrasonic-assisted extraction (USE) followed by SPE cleanup and high-performance liquid chromatography-mass spectrometry (HPLC-MS)/MS analysis with electrospray ionisation (ESI) in a positive mode. The USE conditions (e.g. extraction solvent, pH, and extraction cycles) and high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) parameters were optimised. Quantification was performed by internal standard calibration in multiple reaction monitoring mode. Recoveries of the antibacterials ranged from 41 to 123%, with relative standard deviations within 17%. The sample-based limits of quantification were 10–63?ng?g^?1 dry weight (dw) for FQs (ciprofloxacin, enrofloxacin, lomefloxacin, norfloxacin, and ofloxacin) and 250–500?ng?g^?1 dw for TCs (tetracycline and oxytetracycline). The method was applied to determine the antibacterials in sewage sludge and sediment samples were collected from the Pearl River Delta, China. Ciprofloxacin, norfloxacin, and ofloxacin were frequently detected, ranging from 1052 to 17740?ng?g^?1 dw in dewatered sludge samples, 585–3545?ng?g^?1 dw in untreated solids, and 98–258?ng?g^?1 dw in an urban stream sediment sample, respectively. Lomefloxacin and enrofloxacin were also occasionally detected.     

Multiresidue analysis of atrazine, diuron and their degradation products in sewage sludge by liquid chromatography tandem mass spectrometry

A multiresidue method has been developed to analyze atrazine (ATZ), diuron (DIU), and their major degradation products, desethylatrazine (DEA), desisopropylatrazine (DIA), and dichlorophenylmethylurea in sewage sludge. Liquid chromatography coupled to electrospray tandem mass spectrometry (LC–ESI-MS–MS) allowed, in the multiple-reaction monitoring mode, the simultaneous analysis of these pesticides in only one run after their extraction with ethyl acetate–dichloromethane 90:10 (v/v) and a cleanup on a Florisil column. Stable isotopically labeled ATZ and DIU were used as internal standards to overcome matrix effects during the pesticide quantification. Using fortified samples, the method gave rise to 86–115% as mean recovery values depending on the analyte. Limits of detection (LODs) and of quantification (LOQs) ranging from 0.3 (DIA) to 1.5 (DEA) μg kg⁻¹ dw and from 0.4 (DIA) to 2.0 (DEA) μg kg⁻¹ dw, respectively, were sufficient to achieve the monitoring of these molecules in sludge from wastewater treatment plants of the Ile-de-France region.     

LC-ESI-MS-MS method for the analysis of tetrabromobisphenol A in sediment and sewage sludge

Tetrabromobisphenol A (4,4'-isopropylidenebis(2,6-dibromophenol), TBBPA) is the most widely used brominated flame retardant in the world. Due to its low water solubility TBBPA released in aquatic ecosystems ultimately accumulates in sediments, but the lack of data on its environmental level and temporal trend in sediment cores precludes establishing if the input of TBBPA is an on-going environmental problem. We developed an analytical method involving HPLC-ESI-MS-MS (ion trap) with detection of the negative pseudo-molecular ion of TBBPA and its fragmentation pattern. Recovery of TBBPA from spiked marine sediment (both lyophilized and wet) and dehydrated sewage sludge was better than 95%. The current detection limit of TBBPA is 60 pg injected and the linearity of the response is at least three orders of magnitude, ranging from 7 ng ml(-1) to 7000 ng ml(-1). The method was also applied to the analysis of urban sewage sludge where TBBPA was detected at a concentration of 300 ng g(-1)(dry weight). With an analysis time of less than 20 min, this method is adequate for a rapid re-assessment of archived sediment samples avoiding cumbersome derivatization procedures.     

Fast pressurized liquid extraction with in-cell purification and analysis by liquid chromatography tandem mass spectrometry for the determination of UV filters and their degradation products in sediments

This paper presents the development of a fast and sensitive analytical method for the simultaneous determination of UV filters and degradation products having quite different polarities (log Kow 2.19–6.88) in sediment, by means of pressurized liquid extraction (PLE) with in-cell purification and analysis by ultra-performance liquid chromatography (UPLC) coupled to tandem mass spectrometry (MS/MS). Analytes were simultaneously concentrated and purified by placing aluminium oxide as clean-up sorbent in the extraction cell for a faster sample pre-treatment. Under optimized conditions, quantitative recoveries (only one compound below 80%) and satisfactory precision (RSD, 5–15%) were obtained. Low limits of detection were achieved of 0.5–15 ng/g dry weight (dw). The use of PLE extraction and purification and UPLC technology enabled all the compounds to be separated chromatographically in less than 9 min, and with a total chromatographic analysis time of 18 min. This method significantly decreased the overall time of analysis as compared to those of previously developed. Finally, the optimized methodology was applied to investigate the occurrence of the target UV filters in sediment samples collected along the Ebro river basin (Spain). UV filters were detected in 95% of the sediment samples analysed. Results revealed a widespread presence of octocrylene (OC), reaching concentrations up to 24 × 10² ng/g dw, the highest reported so far. Ethylhexyl dimethyl PABA (OD-PABA) and benzophenone-3 (BP3) were also frequently detected (60–65%), but at lower concentrations (4.4–27 ng/g dw). 4DHB (an estrogenic degradation product of BP3) was present in three samples at concentrations between 12 and 21 ng/g dw. These results constitute the first data on the occurrence of OD-PABA and 4DHB in sediments.     

Simultaneous determination of tetrabromobisphenol A, tetrachlorobisphenol A, bisphenol A and other halogenated analogues in sediment and sludge by high performance liquid chromatography-electrospray tandem mass spectrometry

A high performance liquid chromatography-electrospray (negative) ionization-tandem mass spectrometry (HPLC-ESI(-)-MS-MS) based method has been developed for simultaneous determination of bisphenol A (BPA), tetrachlorobisphenol A (TCBPA), and tetrabromobisphenol A (TBBPA), as well as lower brominated BPA analogues in sediment and sludge samples. Samples were extracted with MTBE, target compounds were partitioned by aqueous solution of sodium hydroxide. The solution was subsequently acidified, and the enrichment and desalting were performed via solid phase extraction (SPE). After cleanup the target compounds were determined by HPLC-ESI(-)-MS-MS. The method limits of quantification (MLOQs) from sediment and sludge for BPA, monobromo-bisphenol A (mono-BBPA), dibromo-bisphenol A (di-BBPA), tribromo-bisphenol A (tri-BBPA), TBBPA and TCBPA were 0.15, 0.02, 0.02, 0.04, 0.05, and 0.03 ng/g (dry weight), respectively. Mean recovery of the analytes from spiked samples ranged from 70 to 105%, and the relative standard deviation ranged from 4.9 to 13.1%. The method was successfully applied to sediment and sludge samples analysis.     

Determination of hexabromocyclododecane isomers in sewage sludge by LC‐MS/MS

A method has been developed to determine α, β and γ diastereoisomers of hexabromocyclododecane (HBCD), a brominated flame retardant, in sewage sludge, based on the ultrasonic‐assisted extraction (UAE) of samples with dichloromethane–ACN (1:1) and the subsequent clean‐up of extracts by dispersive solid phase extraction with primary–secondary amine. Levels of HBCD diastereoisomers were determined by LC coupled with ESI MS/MS. Evaluation of the matrix effect showed a high ion suppression for all the diastereoisomers studied, which was counteracted by using a mixture of labelled HBCD diastereoisomers as internal standards. This method yielded recoveries in the range of 79.6–112.5% with SDs equal or lower than 9.1 The limits of detection were 0.3 ng/g for α‐ and β‐HBCD and 0.2 ng/g for γ‐HBCD. The developed method was successfully applied to 19 sludge samples collected from the province of Madrid (Spain). In most of the samples, β‐HBCD was below the method detection limit, whereas α‐ and γ‐HBCD were quantified in all of the sludge samples, and γ‐HBCD was the predominant diastereoisomer in 63% of the analyzed samples and α‐HBCD predominated in the rest.     

Determination of commonly used azole antifungals in various waters and sewage sludge using ultra-high performance liquid chromatography–tandem mass spectrometry

Sensitive and reliable methods have been developed and validated for determination of commonly consumed azole antifungal pharmaceuticals (clotrimazole, econazole, ketoconazole, and miconazole) and biocides (propiconazole and tebuconazole) in various waters and sewage sludge. Solid phase extraction (SPE) combined with ultra-high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) was used to determine the azole antifungals in waters. Azole antifungals in sewage sludge were extracted with ultrasonic-assisted extraction, followed by SPE cleanup and UHPLC–MS/MS detection. Quantification was performed by internal standard calibration in multiple reaction monitoring mode. Recoveries were mostly in the range of 52–110% with relative standard deviations generally within 20%. Method quantification limits were 0.5–6 ng L⁻¹ in waters and 3–9 ng g⁻¹ dry weight (dw) in sewage sludge, respectively. The methods were applied to determine the azole antifungals in wastewater, river water, sediment, and sewage sludge sampled from the Pearl River Delta, China. Clotrimazole, ketoconazole, and miconazole were widely detected at low ng L⁻¹ in waters, low ng g⁻¹ dw in river sediment, and low μg g⁻¹ dw in sewage sludge. The methods can provide valuable tools for investigating occurrence and fate of the azole antifungals in the environment.     

Gas chromatography/tandem mass spectrometry method for the simultaneous analysis of 19 brominated compounds in environmental and biological samples

A methodology for the simultaneous analysis of eight polybrominated diphenyl ethers (PBDEs); eight methoxylated PBDEs (MeO-PBDEs); and three emerging flame retardants, hexabromobenzene (HBB), pentabromoethyl benzene (PBEB), and decabromodiphenyl ethane (DBDPE) by gas chromatography coupled to tandem mass spectrometry (GC-MS-MS) was developed for two environmental matrices (sediment and sludge) and three biological matrices (fish, dolphin blubber, and bird eggs). The use of selective reaction monitoring (SRM) allows a high selectivity, which is critical in the analysis of complex samples like blubber. Analytical parameters such as linearity, reproducibility, or accuracy were evaluated. Method limits of detection and quantification were evaluated and compared with GC-EI-MS and GC-NCI-MS. Method detection limits were valid for the environmental analysis in all cases, with values between 0.01 and 1.65 ng/g dw for sediment, 0.05 and 2.78 ng/g dw for sludge, 0.04 and 10.6 ng/g lw for fish, 0.01 and 1.11 ng/g lw for dolphin blubber, and 0.03 and 3.20 ng/g lw for bird eggs. The developed method was applied to five samples of each matrix. PBDEs were detected in all samples, while MeO-PBDEs were only detected in dolphin blubber. DBDPE was detected in sediment and sludge.     

Enantiomeric specific determination of hexabromocyclododecane by liquid chromatography-quadrupole linear ion trap mass spectrometry in sediment samples

This paper describes the determination and quantitation of hexabromocyclododecane (HBCD) enantiomers by liquid chromatography-quadrupole linear ion trap mass spectrometry (LC-QqLIT-MS). The method is based on the use of a chiral chromatographic column Nucleodex beta-PM (200 mm x 4.0 mm, 5 microm), which allows a good separation between HBCD enantiomers [(+/-)alpha, (+/-)beta and (+/-)gamma] in less than 15 min and the detection is performed by a Q-Trap instrument. Linearity was checked between 0.05 and 25 injected ng. Limits of detection (LODs) were in the range of 0.3-1.5 pg, limits of quantification (LOQs) were between 1 and 6 pg, and both values are lower than those published in the literature applying LC-MS-MS methods. The method was applied to sediment samples collected along the Cinca River, a tributary of the Ebro River (northeast of Spain). Samples were extracted and purified following a pressurized liquid extraction method. LODs of the method were between 0.12 and 5.61 ng/g and LOQs, from 0.38 to 1.87 ng/g. Total HBCD levels in these sediments ranged from not detected to 2660 ng/g dry weight. Enantiomeric fractions (EFs) were calculated and compared with EF obtained from standard injections. It is important to note that calculated EFs were corrected using (2)H(18)-labeled HBCD standards, in order to compensate matrix effect. EFs obtained in sediment samples suggested a higher presence of (+)alpha-HBCD and (+)gamma-HBCD in technical mixture, this suggests that it is not a racemic mixture.     

Analysis of hormone antagonists in clinical and municipal wastewater by isotopic dilution liquid chromatography tandem mass spectrometry

A comprehensive method was developed for the simultaneous trace analysis of ten hormone antagonist pharmaceuticals (raloxifene, exemestane, letrozole, anastrozole, mifepristone, finastride, tamoxifen, N-desmethyltamoxifen, clomiphene, and toremifene) in municipal sewage and hospital wastewater samples. The target compounds were firstly extracted using an Oasis HLB cartridge, followed by purification by an aminopropyl cartridge, and were then analyzed by liquid chromatography electrospray ionization tandem mass spectrometry in positive ion mode. The recoveries for the analytes based on internal standard calibration in different test matrices ranged from 67.6 to 118.6% (with the exception of mifepristone in clinical wastewater samples), with relative standard deviations less than 20%. The method quantification limits of the ten pharmaceuticals were in the range 0.10–2.0 ng/L. Excluding exemestane and N-desmethyltamoxifen, eight drugs were detected at 0.20–195.0 ng/L in hospital wastewater and municipal wastewater samples from Beijing.     

Preparation of a sewage sludge laboratory quality control material for butyltin compounds and their determination by isotope-dilution mass spectrometry

The characterisation of a laboratory quality control material (QCM) for dibutyltin (DBT) and tributyltin (TBT) in sewage sludge is described. The reference values were determined by the use of two different types of isotope-dilution mass spectrometry: gas chromatography–mass spectrometry and gas chromatography–inductively coupled plasma mass spectrometry. To avoid possible analytical errors such as non-quantitative extraction and species degradation during sample preparation, different extraction methods were tested (microwave- and ultrasound-assisted extraction and mechanical stirring). The reference values were based on the unweighted means of results from the homogenisation and characterisation studies. The reference values obtained were 1,553 ± 87 and 534 ± 38 ng Sn g^-1 for DBT and TBT, respectively. In the uncertainty budget estimation, the sample inhomogeneity and between-method imprecision were taken into account. The concentrations of DBT and TBT in QCM are similar to those in the harbour sediment certified reference material PACS-2. Likewise, the levels of DBT and TBT are in the range of these compounds normally present in sewage sludge worldwide. In the future, the QCM will be used for an intercomparison study on DBT and TBT in sewage sludge, and as a day-to-day QCM during studies concerning the application of sewage sludge as an additive to artificial soil or as a raw material in civil engineering construction.     

Concurrent extraction,clean‐up,and analysis of polybrominated diphenyl ethers,hexabromocyclododecane isomers,and tetrabromobisphenol A in human milk and serum

A method has been developed and validated for the concurrent extraction, clean‐up, and analysis of polybrominated diphenyl ethers (PBDEs), α‐, β‐, and γ‐hexabromocyclododecane (HBCD), and tetrabromobisphenol A (TBBPA) in human milk and serum. Milk and serum samples were extracted using accelerated solvent extraction with acetone/hexane 1:1, v/v and liquid–liquid extraction with methyl‐tert‐butyl ether/hexane 1:1, v/v, respectively. The removal of co‐extracted biogenic materials was achieved by gel permeation chromatography followed by sulfuric acid treatment. The fractionation of the PBDEs and HBCD/TBBPA was performed using a Supelco LC‐Si SPE cartridge. The detection of the PBDEs was then performed by GC–MS and that of the HBCDs and the TBBPA was performed using UPLC–MS/MS. The pretreatment procedure was optimized, and the characteristic ions and fragmentation of the analytes were studied by MS or MS/MS. A recovery test was performed using a matrix spiking test at concentrations of 0.05–10 ng/g. The recoveries ranged from 78.6–108.8% with RSDs equal to or lower than 14.04%. The LODs were 1.8–60 pg/g. The usefulness of the developed method was tested by the analysis of real human samples, and several brominated flame retardants in different samples were detected and analyzed.     

Development of analytical procedures for trace-level determination of polybrominated diphenyl ethers and tetrabromobisphenol A in river water and sediment

The aim of this work was to develop procedures for the simultaneous determination of selected brominated flame retardants (BFRs) in river water and in river bed sediment. The target analytes were polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA). To determine dissolved BFRs, a novel mixed-mode solid-phase extraction procedure was developed by combining a hydrophobic sorbent (C₁₈) with a silica-based anion exchange sorbent, so as to overcome the negative artefact induced by dissolved organic carbon. Extraction recoveries exceeded 73% for most analytes, except for BDE-183 and BDE-209 (57%). As regards suspended sediment and river bed sediment, extraction was carried out by means of ultrasonication (recoveries: 73–94%). These procedures, combined to gas chromatography coupled to negative chemical ionisation mass spectrometry (GC-NCI-MS), enabled the determination of BFRs at trace level: 3-160 pg L⁻¹ in river water, 5–145 pg g⁻¹ in bed sediment. These methods were applied to the determination of PBDEs and TBBPA in a suburban river (near Paris, France). PBDEs were systematically detected in the water column (ΣBDEs, 2,300–4,300 pg L⁻¹); they partitioned between the dissolved and particulate phases and BDE-209 was the dominant congener, followed by BDE-99 and BDE-47. TBBPA was detected in the dissolved phase only (<35–68 pg L⁻¹). All selected BFRs were ubiquitous in bed sediments and levels ranged from 3,100 to 15,100 pg g⁻¹ and from 70 to 280 pg g⁻¹ (dry weight), for ΣBDEs and TBBPA, respectively.     

Fast determination of synthetic polycyclic musks in sewage sludge and sediments by microwave-assisted headspace solid-phase microextraction and gas chromatography–mass spectrometry

One-step in situ microwave-assisted headspace solid-phase microextraction (MA-HS-SPME) followed by gas chromatography–mass spectrometry (GC–MS) analysis is presented as a fast and solvent-free technique to determine synthetic polycyclic musks in sewage sludge and sediment samples. Six synthetic polycyclic musks (galaxolide (HHCB), tonalide (AHTN), celestolide (ADBI), traseolide (ATII), cashmeran (DPMI) and phantolide (AHMI)) were selected in the method development and validation. The effects of extraction parameters for the quantitative extraction of these analytes by one-step MA-HS-SPME were systematically investigated. The dewatered solid sample mixed with 20-mL deionized water (containing 3 g of NaCl in a 40-mL sample-vial) was efficiently extracted by a polydimethylsiloxane-divinylbenzene (PDMS-DVB) fiber placed in the headspace when the extraction slurry was microwave irradiated at 80 W for 5 min. The limits of detection (LODs) ranged from 0.04 to 0.1 ng/g, and the limits of quantification (LOQs) ranged from 0.1 to 0.3 ng/g (fresh weight). A preliminary analysis of sludge and sediment samples revealed that HHCB and AHTN were the two most commonly detected synthetic polycyclic musks; using a standard addition method, their total concentrations were determined to range from 0.3 to 10.9 ng/g (fresh weight) with relative standard deviation (RSD) ranging from 4% to 10%.     

Investigation of extraction procedures and HPLC-DAD/MS for the determination of the brominated flame retardant tetrabromobisphenol A bis(2,3-dibromopropylether) in environmental samples

A method for the determination of the novel brominated flame retardant tetrabromobisphenol A bis(2,3-dibromopropylether), 1,1′-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-propoxy)-benzene] (TBBPA-dbpe), was developed. Technical TBBPA-dbpe was purified and the results of a thorough physical characterisation are reported. The application of APCI-MS is discussed and the fragmentation patterns are described. Quantification of TBBPA-dbpe was done by HPLC-DAD using external calibration. The validation of the method was accomplished using sediment and sewage sludge samples spiked with defined amounts of authentic TBBPA-dbpe. The average recovery rates of TBBPA-dbpe from spiked samples ranged from 35 to 91% (sediment) and from 57 to 98% (sewage sludge) depending on the respective extraction method. Pressurised fluid extraction (PFE) and fluidised bed extraction were superior to classical Soxhlet and sonication procedures and yielded recovery rates between 90 and 98% with relative standard deviations of 2%. The limits of detection (DTC), identification (ID) and determination (DTM) using HPLC-DAD were 10, 21 and 30 ng g⁻¹ in sediment and 22, 44 and 72 ng g⁻¹ in sewage sludge, respectively.     

Pyrolysis characteristics and kinetics of sewage sludge for different sizes and heating rates

The pyrolysis characteristics and kinetics of sewage sludge for different sizes (d < 0.25 mm, 0.25 mm < d < 0.83 mm, and d > 0.83 mm) and heating rates (5, 20, and 35 °C/min) were investigated in this article. The STA 409 was utilized for the sewage sludge thermogravimetric analysis. FTIR analysis was employed to study the functional groups and intermediates during the process of pyrolysis. Meanwhile, a new method was developed to calculate pyrolysis kinetic parameters (activated energy E, the frequency factor A, and reaction order n) with surface fitting tool in software MATLAB. The results show that all the TG curves are divided into three stages: evaporation temperature range (180–220 °C), main decomposition temperature range (220–650 °C), and final decomposition temperature range (650–780 °C). The sewage sludge of d < 0.25 mm obtains the largest total mass loss, especially at the heating rate of 5 °C/min. By FTIR analysis, the functional groups including NH, C–H, C=C, etc., are all found in the sewage sludge. There is a comparison between the FTIR spectra of sludge heated to 350 °C (temperature associated to maximum devolatilization rate in the second stage) and the FTIR spectra of sludge heated to 730 °C (temperature associated to maximum devolatilization rate in the third stage). In the second stage, the alcohols, ammonia, and carboxylic acid in the sludge have been mostly decomposed into gases, and only a little bit of compounds containing CH and OH of COOH exist. The pyrolysis kinetic parameters of second stage are as follows: the reaction orders are in the range of 1.6–1.8 and the activation energy is about 45 kJ/mol. The frequency factor increases with the increase of heating rate and sewage sludge size.     

Method development for simultaneous analysis of HBCD,TBBPA, and dimethyl-TBBPA in marine biota from Greenland and the Faroe Islands

The brominated flame retardants hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA) are high-production-volume chemicals. In recent years, their presence has been reported in sediment and biota from the marine environment. In this study, an analytical method was developed for the simultaneous determination of HBCD, TBBPA, and the possible metabolite dimethyl-TBBPA. The method was applied in a preliminary screening of egg, liver, and adipose tissue of marine biota from Greenland and the Faroe Islands. α-HBCD was detected in 35 of 36 analysed samples from the Arctic, indicating a ubiquitous presence of α-HBCD in the environment. β- and γ-HBCD were found in 10 and 14 samples, respectively. TBBPA and dimethyl-TBBPA were not detected in any of the samples indicating limited or no transport of these compounds to remote areas.     

Comparison of two extraction methods for the analysis of per- and polyfluorinated chemicals in digested sewage sludge

A rapid and reliable analytical method, based on ion-pair extraction, clean-up on Envicarb cartridge and detection by liquid chromatography–tandem mass spectrometry (LC–MS/MS), was developed for determination of 17 per- and polyfluorinated chemicals (PFCs) in digested sewage sludge. Envicarb cartridge and six labeled internal standards were selected for the elimination/reduction and correction of matrix effects, respectively. As a result, the matrix effect for perfluorooctane sulfonamides (FOSAs) and perfluorocarboxylic acids (PFCAs) with carbon chain length from C6 to C14 was lowered to a range of −14% to +28%. However, the matrix effect for other analytes was still great mainly due to the absence of appropriate internal standard. Mean recoveries of the target analytes based on matrix spikes, at different spike levels (10–300 ng/g), ranged from 70% to 169%. Relative standard deviations (RSDs) were in the range of 2–20% at different spike levels. The limit of quantification (LOQ) ranged between 0.6 and 30 ng/g. The method was successfully applied to several sewage sludge samples from wastewater treatment plants nearby Zürich, Switzerland. In addition, by comparing the accuracy and precision of ion-pair extraction method and methanol extraction method, we further demonstrated that the ion-pair extraction method can be used for the analysis of PFCs in sludge samples. To our knowledge, this is the first study to extract the PFCs in sewage sludge with ion-pair method and to find unsaturated fluorotelomer carboxylic acids (FTUCAs) in sewage sludge.     

Environmental analysis of alcohol ethoxylates and nonylphenol ethoxylate metabolites by ultra-performance liquid chromatography–tandem mass spectrometry

Surfactants and their metabolites can be found in aquatic environments at relatively high concentrations compared with other micropollutants due in part to the exceptionally large volumes produced every year. We have focused our attention here on the most widely used nonionic surfactants, alcohol ethoxylates (AEOs), and on nonylphenol ethoxylate (NPEO) degradation products (short-chain nonylphenol ethoxylates, NP1-3EO, nonylphenol, NP, and nonylphenol ethoxycarboxylates, NP1-2EC), which are endocrine-disrupting compounds. Our main objective in this work was to develop a methodology aimed at the extraction, isolation, and improved analysis of these analytes in environmental samples at trace levels. Extraction recoveries of target compounds were determined for sediment samples after ultrasonic extraction and purification using HLB or C18 solid-phase extraction minicolumns. Recovery percentages were usually between 61 and 102% but were lower for longer AEO ethoxymers. Identification and quantification of target compounds was carried out using a novel ultra-performance liquid chromatography coupled to tandem mass spectrometry (UPLC–MS-MS) approach, a combination that provides higher sensitivity and faster analysis than prior methods using conventional high-performance liquid chromatography–mass spectrometry. Limits of detection were usually below 0.5 ng/g, being higher for monoethoxylate species (>5 ng/g) because of poor ionization. The method was used for analyzing surface sediment samples collected at Jamaica Bay (NY) in 2008. The highest values (28,500 ng/g for NP, 4,200 ng/g for NP1-3EO, 22,400 ng/g for NP1-2EC, and 1,500 ng/g for AEOs) were found in a sampling station from a restricted water circulation area that is heavily impacted by wastewater discharges.