Micelles with highly branched nanoporous interior: Solution properties and binding capabilities of amphiphilic copolymers with linear dendritic architecture

This article describes the solution behavior of model amphiphilic linear‐dendritic ABA block copolymers that self‐assemble in aqueous media and form micelles with highly branched nanoporous cores. The materials investigated are constructed of poly(ethylene glycol), PEG, with molecular weight 5,000 or 11,000 as the water‐soluble B block and poly(benzyl ether) monodendrons [G] of second and third generation as the hydrophobic A fragments. The process of self‐assembly in aqueous media and the character of the micellar core are investigated by fluorescence spectroscopy using pyrene as the molecular probe. The data obtained by different methods indicate that the critical micelle concentrations (cmc) for these systems are between 1.1 × 10⁻⁵ and 2.0 × 10⁻⁵ mol/L for [G‐2]‐PEG5000‐[G‐2] and between 7.08 × 10⁻⁶ and 7.94 × 10⁻⁶ mol/L for [G‐3]‐PEG11000‐[G‐3]. It is found that the ratio of the first and third vibronic bands (I₁/I₃ ) in the fluorescence spectrum of the encapsulated pyrene changes from 1.77 to 1.32 when the concentration of [G‐2]‐PEG5000‐[G‐2] increases from 1.1 × 10⁻⁶ mol/L to 1.1 × 10⁻⁴ mol/L. For [G‐3]‐PEG11000‐[G‐3] these changes are between 1.77 and 1.17 in the same concentration range. The hybrid copolymers form host‐guest complexes with several polyaromatic compounds (phenanthrene, pyrene, perylene and fullerene, C₆₀) that are stable over extended periods of time (more than 12 months). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2711–2727, 2000     

Fabrication of oligo‐glycerol based hydrolase responsive amphiphilic nanocarriers

Herein, we report on the synthesis of a new class of novel non‐ionic amphiphiles using triglycerol as a core, which is further functionalized with hydrophilic units poly(ethylene glycol) monomethyl ether (M_n: 350 and 550) and a pair of hydrophobic alkyl chains (C₁₈ or C₁₅) via chemo‐enzymatic approach. Fluorescence measurements and dynamic light scattering studies showed that all of the synthesized amphiphilic systems spontaneously self‐ assemble in aqueous solution, which is further confirmed by the transmission electron microscopy. Encapsulation of hydrophobic moieties like Nile red and nimodipine was studied using ultraviolet‐visible (UV‐vis) and fluorescence spectrometer techniques. A cytotoxicity study of the amphiphiles using A549, HeLa, and MCF7 cell, which showed that all of the synthesized nanocarriers are well tolerated at the concentrations studied. The release profile of encapsulated Nile red in synthesized amphiphilic system was studied in the presence of the immobilized enzyme (Novozym 435).     

Kinetics of OH and Cl reactions with a series of aldehydes

The rate constants for the reactions of the OH radicals with a series of aldehydes have been measured in the temperature range 243–372 K, using the pulsed laser photolysis‐pulsed laser induced fluorescence method. The obtained data for propanaldehyde, iso‐butyraldehyde, tert‐butyraldehyde, and n‐pentaldehyde were as follows (in cm³ molecule⁻¹ s⁻¹): (a) in the Arrhenius form: (5.3 ± 0.5) × 10⁻¹² exp[(405 ± 30)/T], (7.3 ± 1.9) × 10⁻¹² exp[(390 ± 78)/T], (4.7 ± 0.8) × 10⁻¹² exp[(564 ± 52)/T], and (9.9 ± 1.9) × 10⁻¹² exp[(306 ± 56)/T]; (b) at 298 K: (2.0 ± 0.3) × 10⁻¹¹, (2.6 ± 0.4) × 10⁻¹¹, (2.7 ± 0.4) × 10⁻¹¹, and (2.8 ± 0.2) × 10⁻¹¹, respectively. In addition, using the relative rate method and alkanes as the reference compounds, the room‐temperature rate constants have been measured for the reactions of chlorine atoms with propanaldehyde, iso‐butyraldehyde, tert‐butyraldehyde, n‐pentaldehyde, acrolein, and crotonaldehyde. The obtained values were (in cm³ molecule⁻¹ s⁻¹): (1.4 ± 0.3) × 10⁻¹⁰, (1.7 ± 0.3)10⁻¹⁰, (1.6 ± 0.3) × 10⁻¹⁰, (2.6 ± 0.3) × 10⁻¹⁰, (2.2 ± 0.3) × 10⁻¹⁰, and (2.6 ± 0.3) × 10⁻¹⁰, respectively. The results are presented and discussed in terms of structure‐reactivity relationships and atmospheric importance. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 676–685, 2000     

Synthesis and solution properties of anionic linear–dendritic block amphiphiles

The design and synthesis of novel linear–dendritic diblock amphiphiles with linear poly(acrylic acid) (PAA) as the hydrophilic block and dendritic poly(benzyl ether) as the hydrophobic block are described. The synthetic process consisted of two steps: a poly(methyl acrylate) (PMA)–poly(benzyl ether) dendrimer series were synthesized with atom transfer radical polymerization, and through the hydrolysis of linear PMA block into PAA, amphiphilic block copolymers, the PAA–poly(benzyl ether) dendrimer series, were obtained. The copolymers were characterized by ¹H NMR, Fourier transform infrared, and size exclusion chromatography and exhibited well‐defined architectures and low polydispersities. When the generation number of the dendritic block (G_i) less or equal to 3 and the degree of polymerization of the linear chain (n) was greater than 10, the amphiphiles were water‐soluble. The solution intrinsic viscosity increased with both the length of linear chain and the generation number of the dendritic block. The results obtained demonstrate that dendritic blocks play an unusual role in aqueous solutions of amphiphiles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4282–4288, 2000     

Analysis of 5-methyltetrahydrofolate in human blood, serum and urine by on-line coupling of capillary isotachophoresis and zone electrophoresis

The predominant circulating folate coenzyme in plasma/serum, 5‐methyltetrahydrofolate (5‐MTHF) was determined in human blood, serum and urine using a method based on the hyphenation of capillary ITP and zone electrophoresis. Measurements were done with a commercially available instrument for capillary isotachophoresis equipped with a column‐switching system. The choice of electrolytes was limited by the instability of 5‐MTHF and volatility of electrolytes for the potential coupling of the instrumentation with MS detector. To get an insight into the separability of individual sample components in an isotachophoretic analysis, we constructed zone existence diagrams for isotachophoretic electrolyte systems having a leading electrolyte composed of acetate and ammonium of pH 4.5 and 7.0, hydrocarbonate and ammonium, pH 7.8, chloride and ammonium, pH 5.6, and chloride and creatinine, pH 5.0, with hydroxide ion as the terminator. For isotachophoretic preseparation, the non‐volatile leading electrolyte with good buffering capacity composed of 1×10⁻² M HCl and 2.5×10⁻² M creatinine, pH 5.0, and terminating electrolyte composed of 1×10⁻² M MES was selected as the most suitable. The optimum BGE for CZE analysis from the standpoint of analyte stability, separability and volatility for MS coupling was 1×10⁻² M acetate with 3.5×10⁻² M ammonium, pH 4.5. Using this combination of electrolytes, LODs reached with optical detection at 220 nm were 1.6×10⁻⁷ M in human blood, 1.1×10⁻⁷ M in human serum and 4.7×10⁻⁶ M in human urine. Estimated content of 5‐MTHF in blood and serum samples of women following oral daily administration of 0.8 mg of folic acid was 1.2×10⁻⁵ and 5.8×10⁻⁶ M, respectively.     

Complexation and Fluorescence of Tricyclic Basic Dyes Encapsulated in Cucurbiturils

Tricyclic basic dyes (proflavine, acridine orange, pyronine, pyronine Y, oxonine, thionine and methylene blue) often form one‐to‐one or two‐to‐one complexes with CB[7] and CB[8], respectively. In the case of pyronine Y, the complexes with CB[7] and CB[8] have a one‐to‐one and three‐to‐one stoichiometry, respectively. The binding constants for CB[7] complexes range from 3.07×10⁶ to 1.70×10⁷ m ^?1. In the case of CB[8], the association constant varies between 3.24×10¹³ and 2.50×10¹⁶ m ^?2. Overall, these binding constants are four orders of magnitude higher than those reported for the same dyes in β and γ‐cyclodextrins. Formation of the host–guest complexes leads to an increase in the fluorescence quantum yields in the case of CB[7], while the dimeric or trimeric dye encapsulated in CB[8] are remarkably less fluorescent than the same dye in diluted solutions.     

Rate coefficients for the gas‐phase reaction of OH radicals with selected dihydroxybenzenes and benzoquinones

Rate coefficients have been determined for the gas‐phase reaction of the hydroxyl (OH) radical with the aromatic dihydroxy compounds 1,2‐dihydroxybenzene, 1,2‐dihydroxy‐3‐methylbenzene and 1,2‐dihydroxy‐4‐methylbenzene as well as the two benzoquinone derivatives 1,4‐benzoquinone and methyl‐1,4‐benzoquinone. The measurements were performed in a large‐volume photoreactor at (300 ± 5) K in 760 Torr of synthetic air using the relative kinetic technique. The rate coefficients obtained using isoprene, 1,3‐butadiene, and E‐2‐butene as reference hydrocarbons are k_OH(1,2‐dihydroxybenzene) = (1.04 ± 0.21) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,2‐dihydroxy‐3‐methylbenzene) = (2.05 ± 0.43) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,2‐dihydroxy‐4‐methylbenzene) = (1.56 ± 0.33) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,4‐benzoquinone) = (4.6 ± 0.9) × 10⁻¹² cm³ s⁻¹, k_OH(methyl‐1,4‐benzoquinone) = (2.35 ± 0.47) × 10⁻¹¹ cm³ s⁻¹. This study represents the first determination of OH radical reaction‐rate coefficients for these compounds. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 696–702, 2000     

Electric field induced permeability modulation in pure and mixed Langmuir-Blodgett multilayers of hemicyanine dyes and octadecanoic acid on nanoporous solid supports

Composite structures have been prepared, in which nanoporous (nuclear track-etched) membranes are coated with supported Langmuir-Blodgett (LB) barrier layers. Permeability in these structures is a strong function of membrane composition and applied dc and ac electric fields. Absolute permeabilities fall in the range 3×10⁻¹¹ cm² s⁻¹ ≤P≤3×10⁻⁹ cm² s⁻¹, depending on composition of the barrier layer, identity (charge state) of the probe, and presence of a supporting electrolyte. Zero-field permeabilities showed a definite dependence on composition, with membranes possessing barrier layers on both sides performing better than single-sided membranes, barrier layers with LB multilayers performing better than those with just the support layer, and LB layers composed of mixed stilbazolium amphiphiles and octadecanoic acid performing better than those composed purely of stilbazolium amphiphile. All types of barrier layers studied exhibit permeability changes in the presence of applied electric fields. The magnitude of the effect is a strong function of composition of the barrier layer and the presence of supporting electrolyte. The results support electroporation over iontophoresis as the dominant mechanism for field-mediated increases in permeability. Details of the field-induced permeability changes in phosphate buffer and deionized water suggest that at least two effects are important in determining the transport behavior in these structures: a field-induced structural change in the barrier layer which mediates the electroporation and a field-mediated alteration in transport through nanopores of the nuclear track-etched membrane.     

Preparation and evaluation of amphiphilic silica‐based monolithic column having surface‐bound octanoyl‐aminopropyl moieties for capillary electrochromatography

A novel amphiphilic silica‐based monolithic column having surface‐bound octanoyl‐aminopropyl moieties was successfully prepared by a one‐step in situ derivatization process. As expected, the amphiphilic monolithic column exhibited RP chromatographic behavior toward non‐polar solutes (e.g., alkyl benzenes) with high column performance. As the pH of the buffer inside the column increases, the EOF changed from −2.65×10⁻⁸m² V⁻¹s⁻¹ at pH 3.0 to 1.20×10⁻⁸ m² V⁻¹s⁻¹ at pH 8.0 with the reversion of EOF at about pH 6.4. Using acidic mobile phase, five aromatic acids can be efficiently separated in less than 6 min under co‐EOF conditions. For basic compounds, symmetrical peaks were obtained due to the existence of hydrophilic acyl amide group, which can effectively minimize the adsorption of the positively charged basic analyte to the silica‐based surface of the capillary column.     

Hydrophilic Oligo(lactic acid)s Captured by a Hydrophobic Polyaromatic Cavity in Water

Biologically relevant hydrophilic molecules rarely interact with hydrophobic compounds and surfaces in water owing to effective hydration. Nevertheless, herein we report that the hydrophobic cavity of a polyaromatic capsule, formed through coordination‐driven self‐assembly, can encapsulate hydrophilic oligo(lactic acid)s in water with relatively high binding constants (up to K_a=3×10⁵ m ⁻¹). X‐ray crystallographic and ITC analyses revealed that the unusual host–guest behavior is caused by enthalpic stabilization through multiple CH–π and hydrogen‐bonding interactions. The polyaromatic cavity stabilizes hydrolyzable cyclic di(lactic acid) and captures tetra(lactic acid) preferentially from a mixture of oligo(lactic acid)s even in water.     

Rate constants for the gas‐phase reactions of chlorine atoms with a series of ketones

The pulsed laser photolysis‐resonance fluorescence technique has been used to determine the absolute rate coefficient for the Cl atom reaction with a series of ketones, at room temperature (298 ± 2) K and in the pressure range 15–60 Torr. The rate coefficients obtained (in units of cm³ molecule⁻¹ s⁻¹) are: acetone (3.06 ± 0.38) × 10⁻¹², 2‐butanone (3.24 ± 0.38) × 10⁻¹¹, 3‐methyl‐2‐butanone (7.02 ± 0.89) × 10⁻¹¹, 4‐methyl‐2‐pentanone (9.72 ± 1.2) × 10⁻¹¹, 5‐methyl‐2‐hexanone (1.06 ± 0.14) × 10⁻¹⁰, chloroacetone (3.50 ± 0.45) × 10⁻¹², 1,1‐dichloroacetone (4.16 ± 0.57) × 10⁻¹³, and 1,1,3‐trichloroacetone (<2.4 × 10⁻¹²). © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 62–66, 2000     

Comparative Study on Electroanalysis of Fenthion Using Silver Amalgam Film Electrode and Glassy Carbon Electrode Modified with Reduced Graphene Oxide

Oxidation and reduction processes of the insecticide fenthion was comparatively investigated at a reduced graphene oxide modified glassy carbon electrode (RGO‐GCE) and a cyclic renewable silver amalgam film electrode (Hg(Ag)FE) using square wave stripping voltammetry (SWSV). The influence of pH and SW parameters was investigated. The linear concentration ranges were found to be 1 × 10⁻⁶ – 2 × 10⁻⁵ and 1 × 10⁻⁷ – 2 × 10⁻⁵ mol L⁻¹ for Hg(Ag)FE and RGO‐GCE, respectively. The detection and quantification limits were calculated as 1.3 × 10⁻⁷ and 4.5 × 10⁻⁷ mol L⁻¹ for Hg(Ag)FE and 7.6 × 10⁻⁹ and 2.5 × 10⁻⁸ mol L⁻¹ for RGO‐GCE. Both of the developed electroanalytical methods offer rapid and simple detection of fenthion and were used on spiked tap and river water and apple juice samples. Scanning electron microscopy was used for RGO‐GCE surface characterization.     

Magnetite Nanoparticles Bonded Carbon Quantum Dots Magnetically Confined onto Screen Printed Carbon Electrodes and their Performance as Electrochemical Sensor for NADH

Hybrid magnetite/carbon quantum dots (MagNP/C‐dots) were prepared and their characterization performed by high resolution transmission electron microscopy (HR‐TEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). Because of their suitable magnetization and electrochemical properties, they were used as versatile electrode modifiers after magnetically confining onto screen printed carbon electrodes (SPE), with the aid of a miniature external magnet. The reported strategy introduces a convenient procedure for assembling modified electrodes, since the nanoparticles can be easily released by removing the magnet. The non‐enzymatic magnetic biosensor showed excellent performance in the determination of NADH at the concentration range 2×10⁻⁷ to 5×10⁻⁶ mol L⁻¹, exhibiting a sensitivity of 0.15 μmol L⁻¹ and detection limit of 20 nmol L⁻¹. The MagNP/C‐dots/SPE sensor was also successfully applied for the determination of NADH in serum samples. The interference of typical biological molecules has also been investigated.     

Reversible Photoinduced Switching of Permeability in a Cast Non‐Porous Film Comprising Azobenzene Liquid Crystalline Polymer

Permeation characteristics of an azobenzene‐containing liquid crystalline (LC) non‐porous film are investigated using a metallic corrosion method. Thin films (300 nm) are fabricated by the solution casting of an azobenzene side‐chain LC polymer on freshly polished carbon steel coupons. Coated coupons are treated under the following conditions: a) gradual annealing at a cooling rate lower than 1 °C · min⁻¹ from 150 °C (above its T_g) to room temperature, and b) irradiation at 465 nm (20 mW · cm⁻²) with either circularly polarized light (CPL) or non‐polarized light (NPL). The morphology of these films is characterized using X‐ray diffraction, polarized optical microscopy, and transmission measurements. The results suggest that the annealing treatment resulted in the formation of a polydomain structure consisting of locally ordered small smectic domains that lack mutual orientation. Ordered micro domains are surrounded by disordered phases. CPL and NPL irradiation generates a monodomain orientated structure and an isotropic liquid crystal glass, respectively. The permeability of these non‐porous films treated by CPL, NPL, and annealing are found to be 6.14 × 10⁻⁴, 1.92 × 10⁻², and 1.56 × 10⁻³ cm³ · m⁻² · d⁻¹. An orientation‐dependent structure model is constructed to explain the permeation phenomenon, considering the ordered phase is impermeable, only the disordered phase is accessible to penetrating molecules. Fast switching of gas permeation is demonstrated by alternative irradiation of the film with CPL and NPL, which results in an approximately 30‐fold difference in the permeability of the non‐porous film.

     

Voltammetric Method for the Simultaneous Determination of Melatonin and Pyridoxine in Dietary Supplements Using a Cathodically Pretreated Boron‐doped Diamond Electrode

The simultaneous voltammetric determination of melatonin (MT) and pyridoxine (PY) has been carried out at a cathodically pretreated boron‐doped diamond electrode. By using cyclic voltammetry, a separation of the oxidation peak potentials of both compounds present in mixture was about 0.47 V in Britton‐Robinson buffer, pH 2. The results obtained by square‐wave voltammetry allowed a method to be developed for determination of MT and PY simultaneously in the ranges 1–100 μg mL⁻¹ (4.3×10⁻⁶–4.3×10⁻⁴ mol L⁻¹) and 10–175 μg mL⁻¹ (4.9×10⁻⁵–8.5×10⁻⁴ mol L⁻¹), with detection limits of 0.14 μg mL⁻¹ (6.0×10⁻⁷ mol L⁻¹) and 1.35 μg mL⁻¹ (6.6×10⁻⁶ mol L⁻¹), respectively. The proposed method was successfully to the dietary supplements samples containing these compounds for health‐caring purposes.     

Development and validation of a reversed‐phase high‐performance liquid chromatographic method with solid‐phase extraction for the quantification of hydrochlorothiazide in ex vivo permeation studies

Hydrochlorothiazide (HCT) is a diuretic used to treat hypertension. In order to study its intestinal permeation behavior applying an ex vivo methodology, a rapid, sensitive and selective reversed‐phase liquid chromatography (RP‐HPLC) method coupled with UV detection (RP‐HPLC UV) was developed for the analysis of HCT in TC199 culture medium used as mucosal and serosal solutions in the everted rat intestinal sac model. Also, analytical procedures for the quantification of HCT by RP‐HPLC with UV detection required a sample preparation step by solid‐phase extraction. The method was validated in the concentration range of 8.05 × 10⁻⁷ to 3.22 × 10⁻⁵ m for HCT. Chromatographic parameters, namely carry‐over, lower limit of quantification (1.4491 × 10⁻⁷ m ), limit of detection (3.8325 × 10⁻⁸ m ), selectivity, inter‐ and intraday precision and extraction recovery, were determined and found to be adequate for the intended purposes. The validated method was successfully used for permeability assays across rat intestinal epithelium applying the ex vivo everted rat gut sac methodology to study the permeation behavior of HCT.     

Rate constants for the reactions of OH radicals and Cl atoms with Di‐n‐Propyl ether and Di‐n‐Butyl ether and their deuterated analogs

Using relative rate methods, rate constants for the gas‐phase reactions of OH radicals and Cl atoms with di‐n‐propyl ether, di‐n‐propyl ether‐d₁₄, di‐n‐butyl ether and di‐n‐butyl ether‐d₁₈ have been measured at 296 ± 2 K and atmospheric pressure of air. The rate constants obtained (in cm³ molecule⁻¹ s⁻¹ units) were: OH radical reactions, di‐n‐propyl ether, (2.18 ± 0.17) × 10⁻¹¹; di‐n‐propyl ether‐d₁₄, (1.13 ± 0.06) × 10⁻¹¹; di‐n‐butyl ether, (3.30 ± 0.25) × 10⁻¹¹; and di‐n‐butyl ether‐d₁₈, (1.49 ± 0.12) × 10⁻¹¹; Cl atom reactions, di‐n‐propyl ether, (3.83 ± 0.05) × 10⁻¹⁰; di‐n‐propyl ether‐d₁₄, (2.84 ± 0.31) × 10⁻¹⁰; di‐n‐butyl ether, (5.15 ± 0.05) × 10⁻¹⁰; and di‐n‐butyl ether‐d₁₈, (4.03 ± 0.06) × 10⁻¹⁰. The rate constants for the di‐n‐propyl ether and di‐n‐butyl ether reactions are in agreement with literature data, and the deuterium isotope effects are consistent with H‐atom abstraction being the rate‐determining steps for both the OH radical and Cl atom reactions. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 425–431, 1999     

A Tetra-Porphyrin Host Exhibiting Interannular Cooperativity

Recently identified as another form of cooperativity, interannular cooperativity is rarely observed in supramolecular chemistry. A tetra-porphyrin molecular tweezer with two bis-porphyrin binding sites is reported that exhibits archetypal interannular cooperativity when complexing 1,4-diazabicyclo[2.2.2]octane (DABCO). The UV/Vis titration data best supported a 1:2 plus 2:2 plus 1:4 complexation model (host:guest), giving K₁₂=6.32×10¹³ m ⁻², K₂₂=3.04×10²⁰ m ⁻³, and K₁₄=1.92×10¹⁶ m ⁻⁴ in CHCl₃. The NMR titration data supported the formation of two sandwich species, including tetra-porphyrin⋅(DABCO)₂ as the major species, although there are speciation differences between UV/Vis and NMR concentrations. Using statistical analysis, interannular cooperativity (γ) for tetra-porphyrin⋅(DABCO)₂ was determined to be negative (γ=2.41×10⁻³), which may be explained by DABCO being too small to be optimally bound simultaneously at both bis-porphyrin binding sites.     

Dendronized Triangular Oligo(phenylene ethynylene) Amphiphiles: Nanofibrillar Self‐Assembly and Dye Encapsulation

Triangular‐shaped oligo(phenylene ethynylene) amphiphiles 1 a and 1 b decorated in their periphery with two‐ and four‐branched hydrophilic triethyleneglycol dendron wedges, have been synthesized and their self‐assembling properties in solution and onto surfaces investigated. The steric demand produced by the dendritic substituents induces a face‐to‐face rotated π stacking of the aromatic moieties. Studies on the concentration and temperature dependence confirm this mechanism and provide binding constants of 1.2×10⁵ and 1.7×10⁵ M ^?1 in acetonitrile for 1 a and 1 b , respectively. Dynamic and static light scattering measurements complement the study of the self‐assembly in solution and demonstrate the formation of rod‐like supramolecular structures in aqueous solution. The nanofibers formed in solution can be efficiently transferred onto surfaces. Thus, TEM images reveal the presence of strands of various thickness, with the most common being several micrometers long and with diameters of around 70 nm. Some of these nanofibers present folded edges that are indicative of their ribbon‐like nature. Interestingly, compound 1 b can also form thick filaments with a rope‐like appearance, which points to a chiral arrangement of the fibers. AFM images under highly diluted conditions also reveal long fibers with height profiles that fit well with the molecular dimensions calculated for both amphiphiles. Finally, we have demonstrated the intercalation of the hydrophobic dye Disperse Orange 3 within the filaments and its subsequent release upon increasing the temperature.     

Novel Potentiometric Sensors of Molecular Imprinted Polymers for Specific Binding of Chlormequat

Molecularly imprinted polymers (MIP) were used as potentiometric sensors for the selective recognition and determination of chlormequat (CMQ). They were produced after radical polymerization of 4‐vinyl pyridine (4‐VP) or methacrylic acid (MAA) monomers in the presence of a cross‐linker. CMQ was used as template. Similar non‐imprinted (NI) polymers (NIP) were produced by removing the template from reaction media. The effect of kind and amount of MIP or NIP sensors on the potentiometric behavior was investigated. Main analytical features were evaluated in steady and flow modes of operation. The sensor MIP/4‐VP exhibited the best performance, presenting fast near‐Nernstian response for CMQ over the concentration range 6.2×10⁻⁶–1.0×10⁻² mol L⁻¹ with detection limits of 4.1×10⁻⁶ mol L⁻¹. The sensor was independent from the pH of test solutions in the range 5–10. Potentiometric selectivity coefficients of the proposed sensors were evaluated over several inorganic and organic cations. Results pointed out a good selectivity to CMQ. The sensor was applied to the potentiometric determination of CMQ in commercial phytopharmaceuticals and spiked water samples. Recoveries ranged 96 to 108.5%.