Synthesis and UCST‐type phase behaviors of OEGylated random copolypeptides in alcoholic solvents

A series of OEGylated random copolypeptides with similar main‐chain lengths and different oligo(ethylene glycol) (OEG) molar content and chain lengths were prepared from triethylamine initiated ring‐opening polymerization (ROP) of OEGylated γ‐benzyl‐_L‐glutamic acid based N‐carboxyanhydride (OEG_mBLG–NCA, m = 2, 3) and γ‐benzyl‐_L‐glutamic acid based N‐carboxyanhydride (BLG–NCA). ¹H NMR analysis verified copolypeptides structures and determined the OEG molar content (x). FTIR analysis further confirmed the molecular structures, indicated α‐helical conformations of copolypeptides in the solid‐state, and revealed H‐bonding interactions between OEG pendants and alcoholic solvents. The copolypeptides exhibited a reversible upper critical solution temperature (UCST)‐type phase behavior in various alcoholic solvents (i.e., methanol, ethanol, 1‐propanol, 1‐butanol, and 1‐pentanol) depending on the x values and OEG side‐chain lengths (m). Variable‐temperature UV–vis analysis revealed that the UCST‐type transition temperatures (T_pts) of the copolypeptides in alcohols decreased as x or m value increased or as polymer concentration decreased. T_pts of copolypeptides with high x values (x ≥ 0.50) increased as the number of methylene of the alcoholic solvent increased from 3 (i.e., 1‐propanol) to 5 (i.e., 1‐pentanol). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3444–3453     

Synthesis,Characterization, and thermoresponsive properties of Helical Polypeptides Derivatized from Poly(γ−4‐(3‐chloropropoxycarbonyl)benzyl‐L‐glutamate)

A series of side‐chain‐functionalized α‐helical polypeptides, i.e., poly(γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamate) (6) have been prepared from n‐butylamine initiated ring‐opening polymerization (ROP) of γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamic acid‐based N‐carboxyanhydride. Polypeptides bearing oligo‐ethylene‐glycol (OEG) groups or 1‐butylimidazolium salts were prepared from 6 via copper‐mediated [2+3] alkyne‐azide 1,3‐dipolar cycloaddition or nuleophilic substitution, respectively. CD and FTIR analysis revealed that the polymers adopt α‐helical conformations both in solution and the solid state. Polymers bearing OEG (m = 3) side‐chains showed reversible LCST‐type phase transition behaviors in water while polymers bearing 1‐butylimidazolium and I^? counter‐anions exhibited reversible UCST‐type transitions in water. Variable‐temperature UV‐vis analysis revealed that the phase transition temperatures (T_pts) were dependent on the main‐chain length and polymeric concentration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2469–2480     

A new thermo‐responsive block copolymer with tunable upper critical solution temperature and lower critical solution temperature in the alcohol/water mixture

The multi‐thermo‐responsive block copolymer of poly[2‐(2‐methoxyethoxy)ethyl methacrylate]‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PMEO₂MA‐b‐PVEA) displaying phase transition at both the lower critical solution temperature (LCST) and the upper critical solution temperature (UCST) in the alcohol/water mixture is synthesized by reversible addition‐fragmentation chain transfer polymerization. The poly[2‐(2‐methoxyethoxy)ethyl methacrylate] (PMEO₂MA) block exhibits the UCST phase transition in alcohol and the LCST phase transition in water, while the poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PVEA) block shows the UCST phase transition in isopropanol and the LCST phase transition in the alcohol/water mixture. Both the polymer molecular weight and the co‐solvent/nonsolvent exert great influence on the LCST or UCST of the block copolymer. By adjusting the solvent character including the water content and the temperature, the block copolymer undergoes multiphase transition at LCST or UCST, and various block copolymer morphologies including inverted micelles, core‐corona micelles, and corona‐collapsed micelles are prepared. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4399–4412     

Synthesis and UCST‐type phase behavior of polypeptide with alkyl side‐chains in alcohol or ethanol/water solvent mixtures

A series of thermoresponsive polypeptides bearing 1‐butyl, 1‐hexyl, or 1‐dodecyl side‐chains (i.e., 6a ‐ 6c ) were synthesized by copper‐mediated 1,3‐dipolar cycloaddition with high grafting efficiency (>95%) between side‐chain “clickable” polypeptide, namely poly(γ‐4‐(propargoxycarbonyl)benzyl‐_L‐glutamate) ( 5 ) and 1‐azidoalkanes. 5 with different degree of polymerization (DP = 48–86) were prepared from triethylamine initiated ring‐opening polymerization of γ‐4‐(propargoxycarbonyl)benzyl‐_L‐glutamic acid based N‐carboxyanhydride ( 4 ). ¹H NMR, FTIR, and GPC results revealed the successful preparation of the resulting polypeptides. 6a ‐ 6c showed reversible UCST‐type phase behaviors in methanol, ethanol, and ethanol/water solvent mixtures depending on the polymer main‐chain length, alkyl side‐chain length, weight percentage of ethanol (f_w) in the binary solvent, and so forth. FTIR analysis revealed the presence of the van der Waals interaction between the alkyl pendants of polypeptides and alkyl groups of alcoholic solvents. Variable‐temperature UV‐vis spectroscopy revealed that the UCST‐type phase transition temperature (T_pt) increased as polymer main‐chain length or concentration increased. In ethanol/water solvent mixtures, polypeptide with short alkyl pendant (i.e., 1‐butyl group) and short main‐chain length (DP = 41) showed the widest f_w range and T_pts in the range of 61.0–71.1 °C. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3425–3435     

Synthesis and UCST‐type phase behavior of OEGylated poly(γ‐benzyl‐l‐glutamate) in organic media

A series of OEGylated poly(γ‐benzyl‐l ‐glutamate) with different oligo‐ethylene‐glycol side‐chain length, molecular weight (MW = 8.4 × 10³ to 13.5 × 10⁴) and narrow molecular weight distribution (PDI = 1.12–1.19) can be readily prepared from triethylamine initiated ring‐opening polymerization of OEGylated γ‐benzyl‐l ‐glutamic acid based N‐carboxyanhydride. FTIR analysis revealed that the polymers adopted α‐helical conformation in the solid‐state. While they showed poor solubility in water, they exhibited a reversible upper critical solution temperature (UCST)‐type phase behavior in various alcoholic organic solvents (i.e., methanol, ethanol, 1‐propanol, 1‐butanol, 1‐pentanol, and isopropanol). Variable‐temperature UV–vis analysis revealed that the UCST‐type transition temperatures (T_pts) of the resulting polymers were highly dependent on the type of solvent, polymer concentration, side‐ and main‐chain length. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1348‐1356     

Phase behavior of poly(4‐tert‐butylstyrene‐stat‐4‐tert‐ butoxystyrene)/polyisoprene blends with competitive interactions

The phase behavior of statistical copolymers composed of (4‐tert‐butylstyrene) (B) and (4‐tert‐butoxystyrene) (O), abbreviated as s‐BO, with polyisoprene (I) was investigated by optical microscopic (OM) observation and small‐angle neutron scattering (SANS) measurements. It has been known that B/I blend shows lower critical solution temperature (LCST) type phase diagram, while O/I blend has upper critical solution temperature (UCST) type one. Several blends of s‐BOs having mol fraction of B, m_B, comparable to 0.50, with I showed both UCST and LCST type phase diagram. Furthermore, UCST type phase behavior was observed for blends having small m_B, while LCST type one was for that of large m_B at all used temperatures. Hence, the phase behavior of s‐BO/I blend can be understood as a result of the competition of two interactions having opposite temperature dependence. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2272–2280, 2009     

Upper Critical Solution Temperature‐Type Thermal Response of Soluble Multi‐l‐Arginyl‐Poly‐l‐Aspartic Acid (cyanophycin) Conjugated with Maltodextrin

Multi‐l ‐arginyl‐poly‐l ‐aspartic acid (MAPA), also known as cyanophycin, can incorporate lysine into the side‐chain position of arginine when being prepared with recombinant Escherichia coli. The soluble fraction (sMAPA) is known to display both lower critical solution temperature (LCST) and upper critical solution temperature (UCST) responses at the physiological condition. In an attempt to alter the UCST thermal response, maltodextrin was employed to conjugate onto the amine group of lysine of sMAPA via the formation of Schiff base. In phosphate buffered saline, the UCST of the conjugates appeared around 50–62°C, depending on the extent of conjugation. In contrast to the unmodified sMAPA, the UCST of the conjugate became independent of pH ranging from 1 to 11. Heating the conjugate solution to complete transparent caused a delayed and partial recovery of the original turbidity during subsequent cooling. However, the turbidity can be restored by further precipitation with ethanol or isopropanol followed lyophilization and re‐dissolution. At room temperature, below UCST, the agglomerates exhibited a size of around 200–400 nm under TEM and DLS. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2048–2055     

Synthesis,conformation transition,liquid crystal phase,and self‐assembled morphology of thermosensitive homopolypeptide

Thermosensitive diethylene glycol‐derived poly(L ‐glutamate) homopolypeptides (i.e., poly‐L ‐EG₂‐Glu) with different molecular weights (MW) (M_n,GPC = 5380–32520) were synthesized via the ring‐opening polymerization (ROP) of EG₂‐L ‐glutamate N‐carboxyanhydride (EG₂‐Glu‐NCA) in N,N‐dimethylformamide solution at 50 °C. Their molecular structure, conformation transition, liquid crystal (LC) phase behavior, lower critical solution temperature (LCST) transition, and morphology evolution were thoroughly characterized by means of FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, wide angle X‐ray diffraction, polarized optical microscope, transmission electron microscope, and dynamic light scattering. In solid state, the homopolypeptide poly‐L ‐EG₂‐Glu presented a conformation transition from α‐helix to β‐sheet with increasing their MW at room temperature, while it mainly assumed an α‐helix of 80–86% in aqueous solution. Poly‐L ‐EG₂‐Glu showed a thermotropic LC phase with a transition temperature of about 100 °C in solid state, while it gave a reversible LCST transition of 34–36 °C in aqueous solution. The amphiphilic homopolypeptide poly‐L ‐EG₂‐Glu self‐assembled into nanostructures in aqueous solution, and their critical aggregation concentrations decreased with increasing MW. Interestingly, their morphology changed from spherical micelles to worm‐like micelles, then to fiber micelles with increasing MW. This work provides a simple method for the generation of different nanostructures from a thermosensitive biodegradable homopolypeptide. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of Thermo‐Responsive Polymers With Both Tunable UCST and LCST

New water‐soluble block copolymers of 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA), oligo(ethylene glycol) methacrylate (OEGMA), and N‐(3‐(dimethylamino) propyl) methacrylamide (DMAPMA) (poly(OEGMA‐co‐MEO₂MA)‐b‐poly(DMAPMA)) were prepared via sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization. Selective quaternization of poly(DMAPMA) block gives poly(OEGMA‐co‐MEO₂MA)‐b‐poly((3‐[N‐(3‐methacrylamidopropyl)‐N,N‐dimethyl]ammoniopropane sulfonate)‐co‐N‐(3‐(dimethylamino) propyl) methacrylamide), such block copolymer exhibits double thermo‐responsive behavior in water, poly(MEO₂MA‐co‐OEGMA) block shows a lower critical solution temperature (LCST), and poly((3‐[N‐(3‐methacrylamidopropyl)‐N,N‐dimethyl]ammoniopropane sulfonate)‐co‐N‐(3‐(dimethylamino) propyl) methacrylamide) block shows a upper critical solution temperature (UCST). Both of LCST and UCST can be controlled: LCST could be tuned by the fraction of OEGMA units in poly(OEGMA‐co‐MEO₂MA), and UCST was found to be dependent on the degree of quaternization (DQ).

     

Water‐Soluble Thermoresponsive α‐Helical Polypeptide with an Upper Critical Solution Temperature: Synthesis,Characterization, and Thermoresponsive Phase Transition Behaviors

Water‐soluble polypeptides bearing 1‐alkylimidazolium (methyl or n‐butyl) and various counter‐anions (i.e., Cl⁻, I⁻ or BF₄⁻) are prepared by ring‐opening polymerization of γ‐4‐chloromethylbenzyl‐_l‐glutamate‐based N‐carboxyanhydride ( 3 ), post‐polymerization of poly(γ‐4‐chloromethylbenzyl‐_l‐glutamate) ( 4 ), and ion‐exchange reaction. Circular dichroism (CD) analysis reveals that the resulting polypeptides adopt an α‐helical conformation in water with a fractional helicity in the range of 30%–56% at 20 °C and exhibit good conformational stability against temperature variations. The polypeptides exhibit lower critical solution temperature (LCST)‐type or upper critical solution temperature (UCST)‐type transitions in organic solvents or in water. The UCST‐type transition temperature (T_pt) in water is independent on the molecular weight, yet it decreases upon addition of NaCl and increases upon addition of NaI or NaBF₄, suggesting a mainly electrostatic interaction mechanism.

     

Swelling behaviour of thermo-sensitive hydrogels based on oligo(ethylene glycol) methacrylates

The thermo-sensitive swelling behaviour of hydrogels based on 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA) and synthesized by free radical polymerization has been investigated. The homopolymer hydrogel presents a low critical solution temperature (LCST) close to room temperature, which can be modulated by copolymerization with longer oligo(ethylene glycol) side chain methacrylates (OEG_xMA). Then, three series of copolymeric hydrogels synthesized with MEO₂MA and several low ratios of OEG_xMA with M_n = 475 g mol⁻¹ (OEG₈MA), M_n = 1100 g mol⁻¹ (OEG₂₃MA) and M_n = 2080 g mol⁻¹ (OEG₄₅MA) were studied. In addition to conventional tetra(ethylene glycol) dimethacrylate (TEGDMA) crosslinker, the use of biodegradable oligo(caprolactone) dimethacrylate (OCLDMA) was also tested. The hydrophilic/hydrophobic balance, function of the short and the long OEG side chains, establishes a swelling behaviour depending on monomer composition, side chain length and temperature. The swelling at equilibrium increases with increasing the amount of OEG_xMA in the copolymer and, at the same time, the collapsing moves progressively to higher temperature. The temperature dependent volumetric response of some of these hydrogels can be compare with the most extended thermo-sensitive hydrogel, which is based on poly(N-isopropylacrylamide) (P(N-iPAAm)). Therefore, they are potential candidates to replace it in applications where biocompatibility is required.     

Zwitterion/Brønsted Acid Mixtures Showing Controlled Lower Critical Solution Temperature‐Type Phase Changes with Water

A new ammonium‐type zwitterion (ZI), N,N‐dihexyl‐N‐monopentyl‐3‐sulfonyl‐1‐propaneammonium (N₆₆₅C3S) with adequate hydrophobicity showed reversible and highly temperature‐sensitive lower critical solution temperature (LCST)‐type phase transitions after being mixed with pure water. Generally for such compounds, those with longer alkyl chains were immiscible with water and those with shorter chains were miscible with water, regardless of temperature. A slightly more hydrophobic ZI than N₆₆₅C3S showed LCST‐type phase behavior with water when it was mixed with equimolar amounts of a Brønsted acid such as trifluoromethanesulfonic acid (HTfO). The phase‐transition temperature of the ZI/Brønsted acid mixed aqueous solution was controllable by water content.     

Comb‐like polymers pendanted with elastin‐like peptides showing sharp and tunable thermoresponsiveness through dynamic covalent chemistry

Comb‐like polymers carrying two elastin‐like polypeptide (ELP) pendants in each repeat unit were synthesized. The densely attached peptide chains afford these polymers with sharp thermally induced phase transitions, and their lower critical solution temperature (LCST) can be varied with molecular weights, solution pH and salt concentrations. Through amino terminals in ELP pendants, oligoethylene glycol (OEG)‐based dendrons cored with aldehyde were attached to the polymers through dynamic covalent imines. By virtue of dynamic characteristics of these novel dendronized polymers, their LCSTs can be tuned significantly by dendron coverage to shift from that dominated by ELPs to that dominated by OEG dendrons. Furthermore, dendron coverage can be enhanced obviously by the thermally induced phase transitions or greatly by freezing the polymer aqueous solutions. The work provides a convenient methodology to improve thermoresponsiveness of ELPs through polymer topology and to switch their properties through dynamic covalent chemistry. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3379–3387     

2,6‐Diaminopyridine and Acrylamide‐Based Copolymers with Upper Critical Solution Temperature‐type Behavior in Aqueous Solution

A novel copolymer based on supramolecular motif 2,6‐diaminopyridine and water‐soluble acrylamide, poly[N‐(6‐acetamidopyridin‐2‐yl) acrylamide‐co‐acrylamide], was synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization with various monomer compositions. The thermoresponsive behavior of the copolymers was studied by turbidimetry and dynamic light scattering (DLS). The obtained copolymers showed an upper critical solution temperature (UCST)‐type phase transition behavior in water and electrolyte solution. The phase transition temperature was found to increase with decreasing amount of acrylamide in the copolymer and increasing concentration of the solution. Furthermore, the phase transition temperature varied in aqueous solutions of electrolytes according to the nature and concentration of the electrolyte in accordance with the Hoffmeister series. A dramatic solvent isotope effect on the transition temperature was observed in this study, as the transition temperature was almost 10–12 °C higher in D₂O than in H₂O at the same concentration and acrylamide composition. The size of the aggregates below the transition temperature was larger in D₂O compared to that in H₂O that can be explained by deuterium isotope effect. The thermoresponsive behavior of the copolymers was also investigated in different cell medium and found to be exhibited UCST‐type phase transition behavior in different cell medium. Such behavior of the copolymers can be useful in many applications including biomedical, microfluidics, optical materials, and in drug delivery. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2064–2073     

Photocleavable and tunable thermoresponsive amphiphilic random copolymer: Self‐assembly into micelles,dye encapsulation,and triggered release

A double‐responsive amphiphilic random copolymer (P(OEtOxA)‐ran‐PNBA) composed of thermoresponsive poly(oligo(2‐ethyl‐2‐oxazoline)acrylate) (P(OEtOxA)) segments and photocleavable poly(2‐nitrobenzyl acrylate) (PNBA) segments is synthesized via combination of cationic ring‐opening polymerization (CROP) and reversible addition‐fragmentation chain transfer (RAFT) polymerization techniques. The P(OEtOxA)‐ran‐PNBA copolymer exhibits lower critical solution (LCST)‐type soluble‐to‐turbid phase transition in water with tunable cloud point (T_cp) with respect to chain length of P(OEtOxA) segment present. The photocleavage of PNBA segments by UV irradiation transforms amphiphilic P(OEtOxA)‐ran‐PNBA to fully hydrophilic P(OEtOxA)‐ran‐poly(acrylic acid) resulting in the appreciable increase of T_cp of copolymer in aqueous solution. Owing to the amphiphilic nature, the P(OEtOxA)‐ran‐PNBA copolymer molecules self‐assemble into well‐dispersed spherical micelles in water. There is a disruption of the copolymer micelles with UV light irradiation as well as shrinkage of micellar size with increasing temperature above the LCST of copolymer in solution. Finally, the encapsulation of hydrophobic guest molecule (nile red) into P(OEtOxA)‐ran‐PNBA copolymer micelles and thermo‐ and photo‐triggered release of nile red are demonstrated. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1714–1729     

A Novel Nanocomposite Hydrogel with Precisely Tunable UCST and LCST

Novel thermosensitive nanocomposite (NC) hydrogels consisting of organic/inorganic networks are prepared via in situ free radical polymerization of 2‐(2‐methoxyethoxy) ethyl methacrylate (MEO₂MA) and oligo(ethylene glycol) methacrylate (OEGMA) in the presence of inorganic cross‐linker clay in aqueous solution. The obtained clay/P(MEO₂MA‐co‐OEGMA) hydrogels exhibit double volume phase transition temperatures, an upper critical solution temperature (UCST), and a lower critical solution temperature (LCST), which can be controlled between 5 and 85 °C by varying the fraction of OEGMA units and the weight percentage of cross‐linker clay. These new types of NC hydrogels with excellent reversible thermosensitivity are promising for temperature‐sensitive applications such as smart optical switches.

     

Miscibility of poly(styrene‐co‐butyl acrylate) with poly(ethyl methacrylate): Existence of both UCST and LCST

A miscible homopolymer–copolymer pair viz., poly(ethyl methacrylate) (PEMA)–poly(styrene‐co‐butyl acrylate) (SBA) is reported. The miscibility has been studied using differential scanning calorimetry. While 1 : 1 (w/w) blends with SBA containing 23 and 34 wt % styrene (ST) become miscible only above 225 and 185 °C respectively indicating existence of UCST, those with SBA containing 63 wt % ST is miscible at the lowest mixing temperature (i.e., T_g's) but become immiscible when heated at ca 250 °C indicating the existence of LCST. Miscibility for blends with SBA of still higher ST content could not be determined by this method because of the closeness of the T_g's of the components. The miscibility window at 230 °C refers to the two copolymer compositions of which one with the lower ST content is near the UCST, while the other with the higher ST content is near the LCST. Using these compositions and the mean field theory binary interaction parameters between the monomer residues have been calculated. The values are χ_ST‐BA = 0.087 and χ_EMA‐BA = 0.013 at 230 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 369–375, 2000     

Atomistic insights on the LCST behavior of PMEO2MA in water by molecular dynamics simulations

Fully atomistic molecular dynamics simulations of poly(2‐[2‐methoxyethoxy]ethyl methacrylate) (PMEO₂MA) in water at temperatures below and above its lower critical solution temperature (LCST) were performed to improve the understanding of its LCST behavior. Atomic trajectories were used to calculate various structural and dynamic properties. Simulation results show that PMEO₂MA undergo a distinct coil‐to‐globule transition above LCST. Detailed analyses of the number of first hydration shell water molecules around various atomic regions are revealed that the water solubility of PMEO₂MA below LCST is mainly provided by the hydrophobic hydration around the side chain carbon atoms. This is achieved by the cage‐like water network formations which are disrupted when the temperature is increased above LCST, accompanied by significant amount of water molecule release and local water‐ordering reduction, which leads to the LCST phase transition. Furthermore, other analyses such as the number of hydrogen bonds and hydrogen bond lifetimes suggest that intermolecular hydrogen bondings between polymer and water molecules have little effect on the phase transition. Our results will contribute to a better understanding on the LCST phase transition of oligo(ethylene glycol) methyl ether methacrylate (OEGMA)‐based homopolymers at atomistic level that will be useful when designing homo‐ and co‐polymers of OEGMAs with desired properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 429–441     

Design of a Tunable Self‐Oscillating Polymer with Ureido and Ru(bpy)3 Moieties

An upper critical solution temperature (UCST)‐type self‐oscillating polymer was designed that exhibited rhythmic soluble–insoluble changes induced by the Belousov–Zhabotinsky (BZ) reaction. The target polymers were prepared by conjugating Ru(bpy)₃, a catalyst for the BZ reaction, to ureido‐containing poly(allylamine‐co‐allylurea) (PAU) copolymers. The Ru(bpy)₃‐conjugated PAUs exhibited a UCST‐type phase‐transition behavior, and the solubility of the polymer changed in response to the alternation in the valency of Ru(bpy)₃. The ureido content influences the temperature range of self‐oscillation, and the oscillation occurred at higher temperatures than conventional LCST‐type self‐oscillating polymers. Furthermore, the self‐oscillating behavior of the Ru‐PAU could be regulated by addition of urea, which is a unique tuning strategy. We envision that novel self‐oscillating polymers with widely tunable soluble‐insoluble behaviors can be rationally designed based these UCST‐type polymers.     

Hydration Changes during Thermosensitive Association of a Block Copolymer Consisting of LCST and UCST Blocks

Summary: Thermosensitive association of a diblock copolymer consisting of poly(3‐dimethyl(methacryloyloxyethyl) ammonium propane sulfonate) (PdMMAEAPS), as an upper critical solution temperature (UCST) block, and poly(N,N‐diethylacrylamide) (PdEA), as a lower critical solution temperature (LCST) block, has been investigated by using IR spectroscopy. The ν(CO) and ν(SO) bands of the PdMMAEAPS block and the amide I band of PdEA block critically changed at the UCST and LCST, respectively, indicating that the segmental interaction of each block is altered at each transition.

The double temperature responsiveness of a UCST block and LCST block containing diblock copolymer. Micelles form at temperatures both below the UCST and above the LCST of the blocks.