Polyurethane elastomers based on amphiphilic poly(caprolactone)‐b‐poly(butadiene)‐b‐poly(caprolactone) triblockcopolyols

Hydroxyl‐terminated poly(butadiene) (HTPB; M_n = 2100 g mol⁻¹) was capped with 30 and 60 wt % of ɛ‐caprolactone to reach amphiphilic triblock copolymers in form of capped poly(butadiene) CPB. The former (CPB30; M_n = 3300 g/mol) is amorphous with a glass temperature of −56 °C. CPB60 (M_n = 4000 g mol⁻¹) is semi‐crystalline with a melting point of 50 °C and a glass transition at −47 °C. The CPBs, HTPB and polycaprolactone diol (M_n = 2000 g mol⁻¹) were used as soft segment components in the preparation of polyurethane elastomers (PUE), using a 1/1 mixture of an MDI prepolymer and uretonimine modified MDI, and hard phase components in form of 1,3‐propane diol, 1,4‐butane diol, and 1,5‐pentane diol. CPB‐based elastomers with 1,4 butane diol (8 wt %) show hard domains as fringed aggregates with a better connection to the continuous phase than the HTPB‐based PUE. The soft segment glass transition temperature (T_g) is at −28 °C for HTPB‐based PUE and at −43 °C for those of CPB. The tensile strength of the CPB30&60‐based PUE is found between 20 and 30 MPa at an elongation at break of 400% and 550%, respectively. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1162–1172     

Processable cyanate ester resin from Cis resveratrol

Trans resveratrol isomerizes to cis resveratrol (cRes) with ultra‐violet light and undergoes cyanation to the new compound cRes tricyanate ( 2 ). Monomer 2 polymerizes to a polycyanurate that is remarkably stable to heat with a glass transition temperature > 350 °C and char yield of 73% in air up to 600 °C. The monomer 2 melts at <80 °C with a wide processing window before polymerization. The new thermosetting resin made from a natural product is a useful matrix material for polymer matrix composites requiring high‐performance characteristics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 971–980     

Highly thermal conductive benzoxazine‐epoxy interpenetrating polymer networks containing liquid crystalline structures

A diamine‐based benzoxazine monomer (Bz) and a liquid crystalline epoxy monomer (LCE) are synthesized, respectively. Subsequently, a benzoxazine‐epoxy interpenetrating polymer network (PBEI) containing liquid crystalline structures is obtained by sequential curing of the LCE and the Bz in the presence of imidazole. The results show that the preferential curing of LCE plays a key role in the formation mechanism of liquid crystalline phase. Due to the introduction of liquid crystalline structures, the thermal conductivity of PBEI increases with increasing content of LCE. When the content of LCE is 80 wt %, the thermal conductivity reaches 0.32 W m^?1 K^?1. Additionally, the heat‐resistance of PBEI is superior to liquid crystalline epoxy resin. Among them, PBEI55 containing equal weight of Bz and LCE has better comprehensive performance. Its thermal conductivity, glass transition temperature, and the 5 % weight loss temperature are 0.28 W m^?1 K^?1, 160 °C, and 339 °C, respectively. By introducing boron nitride (BN) fillers into PBEI55, a composite of PBEI/BN with the highest thermal conductivity of 3.00 W m^?1 K^?1 is obtained. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1813–1821     

Enhanced performance of photorefractive poly(N‐vinyl carbazole) composites

We present the enhanced photorefractive performance of high molecular weight poly(N‐vinyl carbazole) (PVCz)‐based composites. Higher diffraction efficiency with faster speed of grating build‐up was obtained by optimizing the composition of the PVCz composites. At relatively low applied electric field of E = 45 V μm^?1, diffraction efficiency of 26% for p‐polarized probe beam and corresponding that of 5.1% for s‐polarized probe beam were measured with faster grating build‐up speed of 48.3 s^?1 for the composite with 2,4,7‐trinitrofluorenone (TNF) as a sensitizer. Fastest speed of grating build‐up of 100 s^?1 and large optical gain up to 110 cm^?1 were measured at E = 80 V μm^?1 for the composite with fullerene derivative of PCBM as a sensitizer. These improved performances are due to a large orientational enhancement effect with faster response speed in addition to Pockels effect for the samples with appropriate glass transition temperature. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Allyl ethers as combined plasticizing and crosslinkable side groups in polycarbonate‐based polymer electrolytes for solid‐state Li batteries

Allyl ether‐functional polycarbonates, synthesized by organocatalytic ring‐opening polymerization of the six‐membered cyclic carbonate monomer 2‐allyloxymethyl‐2‐ethyltrimethylene carbonate, were used to prepare non‐polyether polymer electrolytes. UV‐crosslinking of the allyl side groups provided mechanically stable electrolytes with improved molecular flexibility—T_g below ?20 °C—and higher ionic conductivity—up to 4.3 × 10^?7 S/cm at 25 °C and 5.2 × 10^?6 S/cm at 60 °C—due to the plasticizing properties of the allyl ether side groups. The electrolyte function was additionally demonstrated in thin‐film Li battery cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2128–2135     

Synthesis and properties of a novel high temperature pyridine‐containing phthalonitrile polymer

A novel pyridine‐containing aromatic phthalonitrile monomer, 2,6‐bis[4‐(3,4‐dicyanophenoxy)benzoyl]pyridine (BCBP) was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide of 2,6‐bis (4‐hydroxybenzoyl)pyridine (BHBP). 4‐(Aminophenoxy) phthalonitrile (APPH) was selected to promote the curing reaction, and the curing behavior has been investigated by differential scanning calorimetric (DSC), suggesting a wide processing window about 64 °C. Different curing additive concentrations resulted in polymers with different crosslinking degrees and subsequently influenced the performance of resins. The resulting BCBP polymer exhibited high glass transition temperatures exceeding 400 °C, outstanding thermo‐oxidative stability with weight retention of 95% at 530 °C, indicating a significant improvement in thermal properties endowed by pyridine units. Additionally, it also showed a lower overall water absorption after submersion in boiling water for 50 hours. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3819–3825     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

The microstructure determination of ethylene‐styrene‐propylene terpolymers at triad level by high‐temperature two‐dimensional NMR spectra

To further extend temperature range of application and low temperature performance of the ethylene‐styrene copolymers, a series of poly(ethylene‐styrene‐propylene) samples with varying monomer compositions and relatively low glass‐transition temperatures (T_g = −28 – 22 °C) were synthesized by Me₂Si(Me₄Cp)(N‐t‐Bu)TiCl2/MMAO system. Since the ¹³C NMR spectra of the terpolymers were complex and some new resonances were present, 2D‐¹H/¹³C heteronuclear single quantum coherence and heteronuclear multiple bond correlation experiments were conducted. A complete ¹³C NMR characterization of these terpolymers was performed qualitatively and quantitatively, including chemical shifts, triad sequence distributions, and monomer average sequence lengths. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 340–350     

Synthesis and properties of a high‐performance pyrimidine‐containing self‐catalyzed phthalonitrile polymer

A self‐catalytic monomer of phthalonitrile, 2‐amino‐4,6‐bis[3‐(3,4‐dicyano‐phenoxy)phenoxy] pyrimidine (ACPP), was synthesized by a one‐pot method with resorcinol, 2‐amino‐4,6‐dichloropyrimidine, and 4‐nitrophthalonitrile. The chemical structure of the ACPP monomer was characterized by Fourier transform Infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy. The curing behavior of ACPP monomer was studied by differential scanning calorimetric, which indicated that the ACPP monomer had a low melting point (84 °C) and revealed an autocatalytic reaction and tremendously wide processing window (193 °C). Wide‐angle X‐ray diffraction (WAXD) and FTIR analyses were employed to explore the microstructure of the ACPP polymers. The properties of the three polymers with different curing procedures were investigated, which implied that the ACPP polymers exhibited excellent thermal stability, high modulus, superior glass‐transition temperature (T_g > 400 °C), and low water absorption with the increase in curing extent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2287–2294     

Structural interaction and gas barrier properties of ethylene‐vinyl alcohol/tin phosphate glass composites

The strength of interaction between tin phosphate glass (PGlass) filler droplets and an ethylene‐vinyl alcohol (EVOH) matrix were investigated by image, thermal, and rheological analysis. 10% PGlass droplets in EVOH were smaller than those previously observed in maleated polypropylene. Analysis using the Fox equation showed that EVOH/97 °C T_g PGlass composites are not miscible systems. Dynamic shear and extensional rheology data of those composites exhibited a weak physical network, with relaxation times longer than that of pure EVOH at all strain rates. The tensile properties of the EVOH/10 vol % PGlass composite showed it to be more ductile and flexible than a typical polymer/inorganic filler system, supporting interaction between PGlass and EVOH sufficient to interrupt polymer–polymer hydrogen bonding. While undrawn EVOH/PGlass composite films showed increased oxygen gas permeability when compared to undrawn neat EVOH film, the drawn composite films exhibited oxygen permeability 6–7 times lower than that of neat EVOH, attributed to the presence of high aspect ratio PGlass particles after orientation. The concept of hydrogen bonding between polymer and PGlass can likely be applied to other polymers such as polyamides which possess numerous hydrogen bonding sites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 989–998     

Partially bio‐based aromatic polyimides derived from 2,5‐furandicarboxylic acid with high thermal and mechanical properties

Two novel bio‐based diamines are synthesized through introduction of renewable 2,5‐furandicarboxylic acid (2,5‐FDCA), and the corresponding aromatic polyimides (PIs) are then prepared by these diamines with commercially available aromatic dianhydrides via two‐step polycondensation. The partially bio‐based PIs possess high glass transition temperatures (T_gs) in the range from 266 to 364 °C, high thermal stability of 5% weight loss temperatures (T_5%s) over 420 °C in nitrogen and outstanding mechanical properties with tensile strengths of 79–138 MPa, tensile moduli of 2.5–5.4 GPa, and elongations at break of 3.0–12.3%. Some colorless PI films (PI‐1‐b and PI‐1‐c) with the transmittances at 450 nm over 85% are prepared. The overall properties of 2,5‐FDCA‐based PIs are comparable with petroleum‐based PI derived from isophthalic acid, displaying the potential for development of innovative bio‐based materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1058–1066     

Hybrid inorganic–organic poly(carborane‐siloxane‐arylacetylene) structural isomers with in‐chain aromatics: Synthesis and properties

Structural isomers of thermo‐oxidatively stable poly(carborane‐siloxane‐arylacetylene) (PCSAA), namely, m‐PCSAA and p‐PCSAA, were synthesized by the reaction of the dimagnesium salts of m‐diethynylbenzene or p‐diethynylbenzene with 1,7‐bis(chlorotetramethyldisiloxyl)‐m‐carborane. The developed polymers have exceptional thermo‐oxidative properties similar to their diacetylene counterpart poly(carborane‐siloxane‐acetylene), PCSA. Thermal treatment of either of the PCSAAs results in a fully crosslinked thermoset by 500 °C resulting from the cycloaddition reactions involving the acetylene and aryl functionalities and subsequent formation of bridging disilylmethylene entities as discerned from Fourier transform infrared, ¹³C and ²⁹Si solid‐state NMR, and XPS studies. X‐ray diffraction analysis revealed that the thermosets obtained from p‐PCSAA possess enhanced crystallinity when compared to that obtained from m‐PCSAA possibly due to more efficient packing interactions of the p‐diethynylbenzene groups during thermoset formation. The presence of the aryl groups in the backbone of the PCSAAs' chains appeared to have enhanced the storage and bulk moduli of their thermosets when compared to the thermoset of PCSA. Dielectric studies of m‐PCSAA and p‐PCSAA revealed segmental relaxation peaks, α, above their glass transition temperatures with p‐PCSAA exhibiting a broader peak with a slower relaxation rate than m‐PCSAA. © 2013 Wiley Periodicals, Inc.^? J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2638–2650     

Salicylaldimine‐functionalized poly(m‐phenyleneethynylene) as turn‐on chemosensor for ferric ion

A new turn on fluorescent probe for ferric ion based on poly(m‐phenyleneethynylene salicylaldimine) ( PPE‐IM ) has been developed. The preparation of PPE‐IM involves post‐polymerization functionalization of the corresponding polymeric amine, PPE‐AM , via the condensation with salicylaldehyde. The degree of polymerization of both PPE‐IM and PPE‐IM is 17 with polydispersity index of 1.5. In aqueous solution, the polymeric PPE‐IM is highly stable unlike its small molecule analog which is gradually hydrolyzed. The weak fluorescence of initial PPE ‐ IM (λ_em = 470) is greatly enhanced by 300 folds upon the addition of Fe³⁺. The ¹H NMR reveals that the fluorescence enhancement is caused by Fe³⁺‐induced hydrolysis of the imine group. The sensing system shows a detection limit of 0.14 μM of Fe³⁺. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1155–1161     

Hole‐transporting host‐polymer series consisting of triphenylamine basic structures for phosphorescent polymer light‐emitting diodes

A series of novel styrene derived monomers with triphenylamine‐based units, and their polymers have been synthesized and compared with the well‐known structure of polymer of N,N′‐bis(3‐methylphenyl)‐N,N′‐diphenylbenzidine with respect to their hole‐transporting behavior in phosphorescent polymer light‐emitting diodes (PLEDs). A vinyltriphenylamine structure was selected as a basic unit, functionalized at the para positions with the following side groups: diphenylamine, 3‐methylphenyl‐aniline, 1‐ and 2‐naphthylamine, carbazole, and phenothiazine. The polymers are used in PLEDs as host polymers for blend systems with the following device configuration: glass/indium–tin–oxide/PEDOT:PSS/polymer‐blend/CsF/Ca/Ag. In addition to the hole‐transporting host polymer, the polymer blend includes a phosphorescent dopant [Ir(Me‐ppy)₃] and an electron‐transporting molecule (2‐(4‐biphenyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole). We demonstrate that two polymers are excellent hole‐transporting matrix materials for these blend systems because of their good overall electroluminescent performances and their comparatively high glass transition temperatures. For the carbazole‐substituted polymer (T_g = 246 °C), a luminous efficiency of 35 cd A^?1 and a brightness of 6700 cd m^?2 at 10 V is accessible. The phenothiazine‐functionalized polymer (T_g = 220 °C) shows nearly the same outstanding PLED behavior. Hence, both these polymers outperform the well‐known polymer of N,N′‐bis(3‐methylphenyl)‐N,N′‐diphenylbenzidine, showing only a luminous efficiency of 7.9 cd A^?1 and a brightness of 2500 cd m^?2 (10 V). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3417–3430, 2010     

Thiol‐acrylate main‐chain liquid‐crystalline elastomers with tunable thermomechanical properties and actuation strain

The purpose of this study was to investigate the influence of cross‐linking on the thermomechanical behavior of liquid‐crystalline elastomers (LCEs). Main‐chain LCE networks were synthesized via a thiol‐acrylate Michael addition reaction. The robust nature of this reaction allowed for tailoring of the behavior of the LCEs by varying the concentration and functionality of the cross‐linker. The isotropic rubbery modulus, glass transition temperature, and strain‐to‐failure showed strong dependence on cross‐linker concentration and ranged from 0.9 MPa, 3 °C, and 105% to 3.2 MPa, 25 °C, and 853%, respectively. The isotropic transition temperature (T_i) was shown to be influenced by the functionality of the cross‐linker, ranging from 70 °C to 80 °C for tri‐ and tetra‐functional cross‐linkers. The magnitude of actuation can be tailored by controlling the amount of cross‐linker and applied stress. Actuation increased with increased applied stress and decreased with greater amounts of cross‐linking. The maximum strain actuation achieved was 296% under 100 kPa of bias stress, which resulted in work capacity of 296 kJ/m³ for the lowest cross‐linked networks. Overall, the experimental results provide a fundamental insight linking thermomechanical properties and actuation to a homogenous polydomain nematic LCE networks with order parameters of 0.80 when stretched. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 157–168     

Stereoselective synthesis and polymerization of Exo‐5‐trimethylsilylnorbornene

Herein the stereoselective two‐step synthesis of pure exo‐5‐trimethylsilylnorbornene is reported. The monomer proved to be highly reactive in both metathesis and addition polymerization. ROMP polymerization was catalyzed by the first‐generation Grubbs catalyst. High‐molecular‐weight saturated addition polymers were prepared using nickel or palladium complexes as precatalysts and Na⁺[B(3,5‐(CF₃)₂C₆H₃)₄]⁻ and/or MAO as cocatalysts. The obtained addition polynorbornenes are highly gas permeable and microporous materials possessing large free volume and BET surface area (up to 540 m²/g). The influence of the substituent orientation (exo‐ vs. exo‐/endo‐mixture) on polymer properties was established. The metathesis polymer based on exo‐isomer exhibits 1.5‐ to 2‐fold increase of permeability coefficients for all gases in comparison to the similar polymer based on the mixture of exo‐ and endo‐isomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1234–1248     

Synthesis of poly(N‐9‐ethylcarbazole‐exo‐norbornene‐5,6‐dicarboximide) for hole‐transporting layer in hybrid organic light‐emitting devices

We synthesized new polynorbornene dicarboximide (PCaNI) functionalized with hole‐transporting carbazole moieties and its copolymer (PCaNA) by ring‐opening metathesis polymerization (ROMP), where the PCaNA was further reacted with 3‐amino‐triethoxysilane to prepare PCaNI/silica hybrid. We also investigated the feasibility of PCaNI and PCaNI/silica hybrid (PCaSi) as a hole‐transporting material for hybrid organic light emitting devices (HOLEDs). To improve the performance of the PCaNI‐based HOLEDs, N,N′‐diphenyl‐N,N′‐(3‐methylphenyl)‐[1,1′‐biphenyl]‐4‐4′‐diamine (TPD) was also introduced into the PCaNI matrix. Results showed that PCaNI exhibited high glass transition temperature (～260 °C) and high optical transparency in the visible region. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of PCaNI were measured as 5.6 and 2.2 eV, while the TPD‐doped PCaNI showed 5.7 eV (HOMO) and 2.6 eV (LUMO). The PCaNI/silica hybrid nanolayers showed excellent solvent resistance due to the formation of covalent bonds between ITO and PCaNI. The HOLEDs with PCaNI/TPD or PCaSi/TPD hybrid nanolayers exhibited relatively higher luminance (～10,000 cd/m²), lower operating voltage (～6.5 V at 300 cd/m²), and higher current efficiency (～2.7 cd/A). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Syntheses of conductive adhesives based on epoxy resin and polyanilines by using N‐tert‐butyl‐5‐methylisoxazolium perchlorate as a thermally latent curing reagent

Conductive composites consisted of epoxy resin and polyanilines (PANIs) doped with dodecylbenzenesulfonic acid ( 1 ), dodecylsulfonic acid (2), di(2‐ethylhexyl)sulfosuccinic acid (3), and HCl were synthesized by use of N‐tert‐butyl‐5‐methylisoxazolium perchlorate (5) under various reaction conditions. It was found that the composites with PANI doped with acid 2 (PANI‐2) prepared by curing with 10 mol % of reagent 5 at 80 °C for 12 h showed high electroconductivity along with the low conducting percolation threshold (3 wt % of PANI‐2). Furthermore, the composite with even ?10 wt % of PANI‐2 exhibited ?10^?1 S/cm of electroconductivity. The UV–vis and IR measurements indicated that the conductive emeraldine salt form of PANI‐2 in the composite was maintained after the curing reaction. The thermal stability was studied by TGA and DSC measurements, and then, the T_d10 and T_g of the composite with 5 and 10 wt % of PANI‐2 were found to be similar to those with the cured epoxy resin itself. In addition, the similar investigation with an oxetane resin instead of the epoxy resin was also carried out. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 718–726, 2006     

D‐π‐a‐type oxime sulfonate photoacid generators for cationic polymerization under UV–visible LED irradiation

Four D‐π‐A‐type nonionic oxime sulfonate photoacid generators (PAGs) have been designed and synthesized for use in light‐emitting diode (LED) excitable cationic photoinitiators, in which N,N‐diphenylamino was used as electron donor with trifluoroacetophenone‐based oxime sulfonates (trifluoromethanoesulfonate and p‐toluenesulfonate) as electron acceptor and substituted fluorene and biphenyl groups as the π‐conjugated systems. PAG‐Ben‐Tol (with biphenyl and p‐toluenesulfonate) and PAG‐Flu‐Tol (with fluorene and p‐toluenesulfonate) showed high quantum yields of photoacid generation (0.33–0.50) and very good thermal stability (over 250 °C). The absorbance spectra of these PAGs were consistent with the emission spectra of commercially gained UV–visible LED light sources. The potential of these PAGs for cationic photoinitiators was tested in two cationic monomer systems. These PAGs needed low light intensity and low concentration for photopolymerization with high conversions of monomer, for example, over 80%, gained at 3.0 mW cm⁻² from 365 to 470 nm LEDs. The photochemical mechanisms of these PAGs are comprehensively investigated and discussed in detail. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1146–1154     

Blue light‐emitting hyperbranched polymers using fluorene‐co‐dibenzothiophene‐S,S‐dioxide as branches

A series of blue light‐emitting hyperbranched polymers comprising poly(fluorene‐co‐dibenzothiophene‐S,S‐dioxide) as the branch and benzene, triphenylamine, or triphenyltriazine as the core were synthesized by an “A₂ + A₂' + B₃” approach of Suzuki polymerization, respectively. All resulted copolymers exhibited quite comparable thermal properties with the glass transition temperatures in the range of 59–68 °C and relatively high decomposition temperatures over 420 °C. Photoluminescent spectra exhibited slight variation with the molar ratio of the dibenzothiophene‐S,S‐dioxide unit and the size of the core units. Polymer light‐emitting devices demonstrated blue emission with excellent stability of electroluminescence. Copolymers based on smaller core units of benzene and triphenylamine exhibited enhanced device performances regarding to that of triphenyltriazine. With the device configuration of ITO/PEDOT:PSS/polymer/CsF/Al, a maximum luminous efficiency of 4.5 cd A^?1 was obtained with Commission Internationale de L'.Eclairage (CIE) coordinates of (0.16, 0.19) for the copolymer PFSO15B. These results indicated that hyperbranched structure can be a promising strategy to attain spectrally stable blue‐light‐emitting polymers with high efficiency. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1043–1051