Synthesis and healing properties of poly(arylether sulfone)–poly(alkylthioether) multiblock copolymers containing disulfide bonds

Thermoplastic elastomers composed of soft and hard segments are important elastic and processable synthetic polymers. The microphase‐separated soft domains show low glass transition temperature and possess sufficient chain mobility at room temperature. In this study, we report the synthesis and healing properties of multiblock copolymers containing disulfide bonds as dynamic covalent bonds. The multiblock copolymers composed of poly(arylether sulfone) and poly(alkylthioether) segments were synthesized by oxidative coupling polymerization of the corresponding thiol‐terminated oligomers. Atomic force microscopy phase images, differential scanning calorimetry, and dynamic mechanical analysis curves indicated the microphase‐separated morphology of the multiblock copolymer. Self‐healing properties of the polymer were evaluated by changes in the elongation at break of the cut/adhered samples. The elongation recovery increased with UV irradiation time, and the multiblock copolymer showed a 93% recovery after UV irradiation for 5 h. The healing efficiency induced by UV irradiation, determined by subtracting the recovery without UV irradiation, was calculated to be 51%. According to the UV spectra and solubility changes after UV irradiation, the main healing factor in this study was the crosslinking reactions caused by thiyl radicals generated from UV irradiation instead of disulfide exchange reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3545–3553     

Polyurethane elastomers based on amphiphilic poly(caprolactone)‐b‐poly(butadiene)‐b‐poly(caprolactone) triblockcopolyols

Hydroxyl‐terminated poly(butadiene) (HTPB; M_n = 2100 g mol⁻¹) was capped with 30 and 60 wt % of ɛ‐caprolactone to reach amphiphilic triblock copolymers in form of capped poly(butadiene) CPB. The former (CPB30; M_n = 3300 g/mol) is amorphous with a glass temperature of −56 °C. CPB60 (M_n = 4000 g mol⁻¹) is semi‐crystalline with a melting point of 50 °C and a glass transition at −47 °C. The CPBs, HTPB and polycaprolactone diol (M_n = 2000 g mol⁻¹) were used as soft segment components in the preparation of polyurethane elastomers (PUE), using a 1/1 mixture of an MDI prepolymer and uretonimine modified MDI, and hard phase components in form of 1,3‐propane diol, 1,4‐butane diol, and 1,5‐pentane diol. CPB‐based elastomers with 1,4 butane diol (8 wt %) show hard domains as fringed aggregates with a better connection to the continuous phase than the HTPB‐based PUE. The soft segment glass transition temperature (T_g) is at −28 °C for HTPB‐based PUE and at −43 °C for those of CPB. The tensile strength of the CPB30&60‐based PUE is found between 20 and 30 MPa at an elongation at break of 400% and 550%, respectively. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1162–1172     

Synthesis of poly(p‐phenylene) macromonomers and multiblock copolymers

Rigid‐rod poly(4′‐methyl‐2,5‐benzophenone) macromonomers were synthesized by Ni(0) catalytic coupling of 2,5‐dichloro‐4′‐methylbenzophenone and end‐capping agent 4‐chloro‐4′‐fluorobenzophenone. The macromonomers produced were labile to nucleophilic aromatic substitution. The molecular weight of poly(4′‐methyl‐2,5‐benzophenone) was controlled by varying the amount of the end‐capping agent in the reaction mixture. Glass‐transition temperatures of the macromonomers increased with increasing molecular weight and ranged from 117 to 213 °C. Substitution of the macromonomer end groups was determined to be nearly quantitative by ¹H NMR and gel permeation chromatography. The polymerization of a poly(4′‐methyl‐2,5‐benzophenone) macromonomer [number‐average molecular weight (M_n) = 1.90 × 10³ g/mol; polydispersity (M_w)/M_n = 2.04] with hydroxy end‐capped bisphenol A polyaryletherketone (M_n = 4.50 × 10³ g/mol; M_w/M_n = 1.92) afforded an alternating multiblock copolymer (M_n = 1.95 × 10⁴ g/mol; M_w/M_n = 6.02) that formed flexible, transparent films that could be creased without cracking. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3505–3512, 2001     

Syntheses,characterization, and properties of multiblock copolymers consisting of polyisobutylene and poly(L‐lactide) segments

The syntheses of {‐poly(L ‐lactide) (PLLA)‐b‐polyisobutylene (PIB)‐}_n multiblock copolymers were accomplished for the first time by chain extension of PLLA‐b‐PIB‐b‐PLLA triblock copolymers. Well‐defined PLLA‐b‐PIB‐b‐PLLA triblock copolymers with predictable M_ns, low PDIs (1.10–1.18) and excellent blocking efficiencies were prepared by anionic ring‐opening polymerizations of L ‐lactide initiated with hydroxyallyl telechelic PIB (HO‐Allyl‐PIB‐Allyl‐OH) in toluene at 110 °C. The triblock copolymers were successfully chain extended with 4,4′‐methylenebis(phenylisocyanate) (MDI) to obtain the multiblock copolymers with good gravimetric yields of ～86 to 96%. The chain‐extended polymers were soluble in a range of common organic solvents. The block copolymers showed two glass transition temperatures in differential scanning calorimetric analysis for the PIB and PLLA blocks indicating microphase separation, which was supported by atomic force microscopy images. The as‐synthesized compression molded multiblock copolymers exhibited tensile strengths in the range of 8–24 MPa with elongations at break in the range of 2.5–400%. The static and dynamic mechanical properties showed a strong dependence on the relative PLLA content in the copolymer. The dynamic mechanical analysis also indicated microphase separation at higher PLLA compositions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3490–3505, 2009     

Templated synthesis of silver nanoparticles in amphiphilic poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) comb copolymer

In this study, poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐graft‐poly(oxyethylene methacrylate), P(VDF‐co‐CTFE)‐g‐POEM, an amphiphilic comb copolymer with hydrophobic P(VDF‐co‐CTFE) backbone and hydrophilic POEM side chains at 73:27 wt % was synthesized. The POEM side chains were grafted from the P(VDF‐co‐CTFE) mainchain backbone via atom transfer radical polymerization (ATRP) using direct initiation of the chlorine atoms in CTFE units. Synthesis of microphase‐separated P(VDF‐co‐CTFE)‐g‐POEM comb copolymer was successful, as confirmed by nuclear magnetic resonance (¹H NMR), FTIR spectroscopy, and transmission electron microscopy (TEM). Nanocomposite films were prepared using the comb copolymer as a template film and the in situ reduction of AgCF₃SO₃ precursor to silver nanoparticles under UV irradiation. Silver nanoparticles with 4–8 nm in average size were in situ created in the solid state template film, as revealed by TEM, UV–visible spectroscopy, and wide angle X‐ray scattering (WAXS). Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) presented the selective incorporation and the in situ growth of silver nanoparticles within the hydrophilic POEM domains of microphase‐separated comb copolymer film. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 702–709, 2008     

Solution characterization of the novel organometallic polymer poly(ferrocenyldimethylsilane)

A series of four well‐defined poly(ferrocenyldimethylsilane) (PFS) samples spanning a molecular weight range of approximately 10,000–100,000 g mol⁻¹ was synthesized by the living anionic polymerization of dimethyl[1]silaferrocenophane initiated with n‐BuLi. The polymers possessed narrow polydispersities and were used to characterize the solution behavior of PFS in tetrahydrofuran (THF). The weight‐average molecular weights (M_w ) of the polymers were determined by low‐angle laser light scattering (LALLS), conventional gel permeation chromatography (GPC), and GPC equipped with a triple detector (refractive index, light scattering, and viscosity). The molecular weight calculated by conventional GPC, with polystyrene standards, underestimated the true value in comparison with LALLS and GPC with the triple detection system. The Mark–Houwink parameter a for PFS in THF was 0.62 (k = 2.5 × 10⁻⁴), which is indicative of fairly marginal polymer–solvent interactions. The scaling exponent between the radius of gyration and M_w was 0.54, also consistent with marginal polymer–solvent interactions for PFS in THF. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3032–3041, 2000     

Synthesis and properties of poly(1‐naphthylacetylene) and poly(9‐anthrylacetylene)

Polymerizations of 1‐naphthylacetylene (1‐NA) and 9‐anthrylacetylene (9‐AA) by various transition metal catalysts were studied, and properties of the polymers were clarified. 1‐NA polymerized with WCl₆‐based catalysts to offer dark purple polymers in good yield. Especially, a binary catalyst composed of WCl₆ and Ph₃Bi gave a polymer with high molecular weight (M_w = 140×10³) and sufficient solubility in common solvents. The use of Mo and Rh catalysts, in contrast, resulted in the formation of insoluble red poly(1‐NA)s. 9‐AA gave insoluble polymers by both WCl₆‐ and MoCl₅‐based catalysts in moderate to good yields. Copolymerization of 9‐AA with 1‐NA by WCl₆–Ph₃Bi provided a soluble copolymer which exhibited the largest third‐order nonlinear optical susceptibilities (χ⁽³⁾(−3ω; ω, ω, ω) = 40×10⁻¹²) among all the substituted polyacetylenes synthesized so far. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 277–282, 1999     

Supramolecular complexes of poly(3‐Hexylthiophene)‐block (and random)‐poly[3‐(2‐(6‐carboxyhexyl)methyl)thiophene] copolymers with perylene bisimide

Block and random copolymers of poly(3‐hexylthiophene) and poly[3‐(2‐(6‐carboxyhexyl)methyl)thiophene] with side‐chain carboxylic functionality ((P3HT‐b‐P3COOH) and (P3HT‐r‐P3COOH) were developed by Grignard Metathesis (GRIM) polymerization. The carboxylic functionality was introduced in the side chain via the oxazoline route. Both the block and random polythiophene copolymers were complexed with pyridine functionalized perylene bisimide to obtain supramolecular block and random polymer complexes. The complex formation in both systems was confirmed by ¹H NMR, WXRD and SAXS studies. An expansion of d spacing upon complex formation was observed in both the block and random copolymer, which could be traced by WXRD. Hole and electron mobilities measured for the supramolecular complexes indicated values which were higher by an order of magnitude for the supramolecular block complex (μ_h ≈ 2.9 × 10⁻⁴ cm²/Vs; μ_e ≈ 3.1 × 10⁻⁶ cm²/Vs) as compared to the random (μ_h ≈ 1.4 × 10⁻⁵ cm²/Vs; μ_e ≈ 4.7 × 10⁻⁷ cm²/Vs) copolymer. These results are indicative of the higher degree of disorder prevailing in the films of random copolymer system compared to the block copolymer. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1574–1583     

Cleavable multiblock copolymer synthesized by ring‐opening metathesis copolymerization of cyclooctene and macrocyclic olefin and its hydrolysis to give carboxyl‐telechelic polymer

A novel cleavable multiblock copolymer was synthesized by ring‐opening metathesis polymerization (ROMP) of cyclooctene (COE) and a flexible 27‐membered macrocyclic olefin (MCO), which is acted as the spacer to collect the polymer structure block by block. MCO 2 was prepared via ring‐closing metathesis of the long chain alkyldiene, and then 2 was well‐ conducted ROMP with COE to provide the multiblock copolymer [Poly(COE)‐ 2 ]_m consisting of homo‐Poly(COE) blocks and ring‐opened 2 segments with different molecular weights (M_n = 30.0 – 249.6 × 10³) and polydispersity index (PDI) within 1.45–1.67 as variation of the feed ratio of COE to 2 . The multiblock copolymer chain containing weak ester linkage can be cleaved under alkali condition to afford the carboxyl‐telechelic Poly(COE) blocks with much lower molecular weights (M_n,h = 3.6–35.7 × 10³) and slight higher PDIs (1.65–1.88). The average block number on multiblock copolymer chain was obtained from the ratio of M_n to M_n,h and was reached up to the value of 7–16. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 380–388, 2010     

Perfectly‐alternating linear (AB)n multiblock copolymers: Effect of molecular design on morphology and properties

Perfectly‐alternating linear (AB)_n multiblock copolymers consist of n AB block pairs covalently linked in an alternating sequence. Although these copolymers can microphase‐order in the same fashion as their lower‐order (n = 1) diblock analogs, the 2(n ? 1) biconformational midblocks comprising each copolymer molecule have a considerable impact on microstructural characteristics and bulk properties. We have applied transmission electron microscopy, differential scanning calorimetry (DSC), and extensional rheometry to examine and compare the morphologies and properties of two series of compositionally symmetric (lamellar) poly(styrene‐b‐isoprene)_n (SI)_n (1 ≤ n ≤ 4) multiblock copolymers. In one series, chain length was held constant allowing block mass (M_b) to decrease with increasing n. In the second copolymer series, M_b remained relatively invariant. Increasing n in these two series generally promoted reductions in both the lamellar period and upper (styrenic) glass‐transition temperature, but noticeable increases in tensile modulus and yield strength. These observed trends are more pronounced in the copolymer series with constant chain length due to the coupled relationship between n and M_b. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 947–955, 2001     

Cobalt‐mediated radical polymerization routes to poly(vinyl ester) block copolymers

Cobalt‐mediated radical polymerizations (CMRPs) utilizing redox initiation are demonstrated to produce poly(vinyl ester) homopolymers derived from vinyl pivalate (VPv) and vinyl benzoate (VBz), and their block copolymers with vinyl acetate (VAc). Combining anhydrous Co(acac)₂, lauroyl peroxide, citric acid trisodium salt, and VPv at 30 °C results in controlled polymerizations that yield homopolymers with M_n = 2.5–27 kg/mol with M_w/M_n = 1.20–1.30. Homopolymerizations of scrupulously purified VBz proceed with lower levels of control as evidenced by broader polydispersities over a range of molecular weights (M_n = 4–16 kg/mol; M_w/M_n = 1.34–1.65), which may be interpreted in terms of the decreased nucleophilicity of these less electron donating propagating polymer chain ends. Based on these results, we demonstrate that sequential CMRP reactions present a viable route to microphase separated poly(vinyl ester) block copolymers as shown by small‐angle X‐ray scattering analyses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and dilute solution properties of branched poly(benzyl methacrylate) using na-clay supported aqueous-phase catalysis

The supported aqueous-phase catalysis (SAPC) using hydrated interface has been used to synthesize branched polymers (star and graft) of benzyl methacrylate (BnMA) via atom-transfer radical polymerization (ATRP) in the presence of Na-clay supported catalyst in anisole at ambient temperature. The propagation of star poly(BnMA)s using diPENDTA-Br₆, as hexa-functional initiator is confined at the hydrated interface between the support and the liquid medium as evident from the obtained polymers that are catalyst contamination-free, and exhibited moderately narrow molecular weight distributions (M_w/M_n ≤ 1.33). The hexa-functionality of synthesized stars is verified by ¹H NMR, the measurement of their intrinsic viscosity ([η]), and radius of gyration (R_g). The polymerization was also recycled up to 5 times to produce star PBnMAs with high initiator efficiency. The star polymers prepared using hydrated Na-clay supported is compared with star prepared using covalent silica supported catalyst system. The star polymer obtained from covalently supported catalyst gave broad M_w/M_n and poor initiator efficiency. The polystyrene-graft-PBnMA (PS-g-PBnMA) copolymer is also prepared using hydrated Na-clay supported catalyst system in anisole at ambient temperature. The graft-copolymer had narrow M_w/M_n and was confirmed using ¹H NMR and atomic force microscopy. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2225–2237     

Influence of adjusted hydrophilic–hydrophobic lengths in sulfonated multiblock copoly(ether sulfone) membranes for fuel cell application

Sulfonated multiblock copoly(ether sulfone)s applicable to proton exchange membrane fuel cells (PEMFCs) were synthesized by the coupling reaction of the hydroxyl‐terminated hydrophilic and hydrophobic oligomers with different lengths in the presence of highly reactive decafluorobiphenyl (DFB) as a chain extender to investigate the influence of each length on the membranes' properties, such as water uptake, proton conductivity, and morphology. Multiblock copolymers with high molecular weights (M_n > 50,000, M_w > 150,000) were obtained under mild reaction conditions. The resulting membranes demonstrated good oxidative stability for hot Fenton's reagent and maintained high water uptake (7.3–18.7 wt %) under a low relative humidity (50% RH). Proton conductivity of all membranes at 80 °C and 95% RH was higher than that of Nafion 117 membrane, and good proton conductivity of 7.0 × 10^?3 S/cm was obtained at 80 °C and 50% RH by optimizing the oligomer lengths. The surface morphology of the membranes was investigated by tapping mode atomic force microscopy (AFM), which showed that the multiblock copolymer membranes had a clearer surface hydrophilic/hydrophobic‐separated structure than that of the random copolymer, and contributed to good and effective proton conduction. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7332–7341, 2008     

Dendritic growth of poly(ε-caprolactone) crystals from compatible blends with poly(t-butyl acrylate) at the air/water interface

Thermodynamic analyses of surface pressure-area (Π-A) isotherms and Brewster angle microscopy (BAM) reveal that poly(ε-caprolactone) (PCL) with a weight average molar mass of M_w = 10 kg mol⁻¹ and polydispersity index of M_w/M_n = 1.25 and poly(t-butyl acrylate) (PtBA, M_w = 25.7 kg mol⁻¹; M_w/M_n = 1.07) form compatible blends as Langmuir films below the dynamic collapse transition for PCL at Π = 11 mN m⁻¹. For PCL-rich blends, in situ BAM studies reveal growth of PCL crystals for compression past the PCL collapse transition. PCL crystals grown in the plateau regime of the Π-A isotherm exhibit a dendritic morphology presumably resulting from the rejection of PtBA from the growing PCL crystals and hindered diffusion of PCL from the surrounding monolayer to the crystal growth fronts. The ability to transfer the PCL dendrites as Langmuir–Schaefer films onto silicon substrates spincoated with a polystyrene layer facilitates detailed morphological characterization by optical and atomic force microscopy (AFM). AFM reveals that the dendritic branching occurs along the {100} and {110} sector boundaries and is essentially independent of composition. AFM also reveals that the average thickness of PCL dendrites formed at room temperature (22.5 °C), ∼7–8 nm, is comparable with that of PCL crystals grown from single-component PCL Langmuir films and spincoated thin films. In contrast, for PtBA-rich blend films PCL crystallization is suppressed. These findings establish PCL blends as an ideal system for exploring the interplay between chain diffusion and crystal growth in a two-dimensional confined geometry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3300–3318, 2007     

Synthesis and self‐assembly morphologies of amphiphilic multiblock copolymers [poly(ethylene oxide)‐b‐polystyrene]n via trithiocarbonate‐embedded PEO macro‐RAFT agent

An amphiphilic multiblock copolymer [poly(ethylene oxide)‐b‐polystyrene]_n [(PEO‐b‐PS)_n] is synthesized by using trithiocarbonate‐embedded PEO as macro‐RAFT agent. PEO with four inserted trithiocarbonate (M_n = 9200 and M_w/M_n = 1.62) groups is prepared first by condensation of α, ω‐dihydroxyl poly(ethylene oxide) with S, S′‐Bis(α, α′‐dimethyl‐α″‐acetic acid)‐trithiocarbonate (BDATC) in the presence of pyridine, then a series of goal copolymers with different St units (varied from 25 to 218 per segment) are obtained by reversible addition‐fragmentation chain transfer (RAFT) polymerization. The synthesis process is monitored by size exclusion chromatography (SEC), ¹H NMR and FT‐IR. The self‐assembled morphologies of the copolymers are strongly dependent of the length of PS block chains when the chain length of PEO is fixed, some new morphologies as large leaf‐like aggregates (LLAs), large octopus‐like aggregates (LOAs), and coarse‐grain like micelles (CGMs) are observed besides some familiar aggregates as large compound vesicles (LCVs), lamellae and rods, and the effect of water content on the morphologies is also discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6071–6082, 2006     

Glycoconjugated polymer: Synthesis and characterization of poly(vinyl saccharide)‐block‐polystyrene‐block‐poly(vinyl saccharide) as an amphiphilic ABA triblock copolymer

Styrene (St) was polymerized with α,α′‐bis(2′,2′,6′,6′‐tetramethyl‐1′‐piperidinyloxy)‐1,4‐diethylbenzene ( 1 ) as an initiator (bulk, [St]/] 1 ] = 570) at 120 °C for 5.0 h to obtain polystyrene having 2,2,6,6‐tetramethylpiperidiloxy moieties on both sides of the chain ends ( 2 ) with a number‐average molecular weight (M_n) of 14,300 and a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.14. 4‐Vinylbenzyl glucoside peracetate ( 3a ) was polymerized with 2 as a macromolecular initiator and dicumyl peroxide (DCP) as an accelerator in chlorobenzene at 120 °C. The polymerization with the [ 3a ]/[ 2 ]/[DCP] ratio of 30/1/1.2 for 5 h afforded a product in a yield of 73%; it was followed by purification with preparative size exclusion chromatography to provide the ABA triblock copolymer containing the pendant acetyl glucose on both sides of the chain ends ( 4a ; M_n = 21,000, M_w/M_n = 1.16). Similarly, the polymerization of 4‐vinylbenzyl maltohexaoside peracetate produced the ABA triblock copolymer containing the pendant acetyl maltohexaose on both side of the chain end ( 4b ; M_n = 31,800, M_w/M_n = 1.11). Polymers 4a and 4b were modified by deacetylation into amphiphilic ABA triblock copolymers containing the pendant glucose and maltohexaose as hydrophilic segment, 5a and 5b , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3978–3985, 2006     

Arborescent polystyrene‐graft‐poly(tert‐butyl methacrylate) copolymers: Synthesis and enhanced polyelectrolyte effect in solution

A technique is described for the preparation of arborescent graft copolymers containing poly(tert‐butyl methacrylate) (PtBMA) segments. For this purpose, tert‐butyl methacrylate is first polymerized with 1,1‐diphenyl‐2‐methylpentyllithium in tetrahydrofuran. The graft copolymers are obtained by addition of a solution of a bromomethylated polystyrene substrate to the living PtBMA macroanion solution. Copolymers incorporating either short (M_w ≈ 5000) or long (M_w ≈ 30,000) PtBMA side chains were prepared by grafting onto linear, comb‐branched (G0), G1, and G2 bromomethylated arborescent polystyrenes. Branching functionalities ranging from 9 to 4500 and molecular weights ranging from 8.8 × 10⁴ to 6.3 × 10⁷ were obtained for the copolymers, while maintaining a low apparent polydispersity index (M_w/M_n ≈ 1.14–1.25). Arborescent polystyrene‐graft‐poly(methacrylic acid) (PMAA) copolymers were obtained by hydrolysis of the tert‐butyl methacrylate units. Dynamic light scattering measurements showed that the arborescent PMAA copolymers are more expanded than their linear PMAA analogues when neutralized with NaOH. This effect is attributed to the higher charge density in the branched arborescent copolymer structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2335–2346, 2008     

Hydrophilic–hydrophobic AB diblock copolymers containing poly(trimethylene carbonate) and poly(ethylene oxide) blocks

AB‐type block copolymers with poly(trimethylene carbonate) [poly(TMC); A] and poly(ethylene oxide) [PEO; B; number‐average molecular weight (M_n) = 5000] blocks [poly(TMC)‐b‐PEO] were synthesized via the ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of monohydroxy PEO with stannous octoate as a catalyst. M_n of the resulting copolymers increased with increasing TMC content in the feed at a constant molar ratio of the monomer to the catalyst (monomer/catalyst = 125). The thermal properties of the AB diblock copolymers were investigated with differential scanning calorimetry. The melting temperature of the PEO blocks was lower than that of the homopolymer, and the crystallinity of the PEO block decreased as the length of the poly(TMC) blocks increased. The glass‐transition temperature of the poly(TMC) blocks was dependent on the diblock copolymer composition upon first heating. The static contact angle decreased sharply with increasing PEO content in the diblock copolymers. Compared with poly(TMC), poly(TMC)‐b‐PEO had a higher Young's modulus and lower elongation at break. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4819–4827, 2005     

Synthesis of poly(succinimide) by bulk polycondensation of L‐aspartic acid with an acid catalyst

The bulk polycondensation of L ‐aspartic acid (ASP) with an acid catalyst under batch and continuous conditions was established as a preparative method for producing poly(succinimide) (PSI). Although sulfuric acid, p‐toluenesulfonic acid, and methanesulfonic acid were effective at producing PSI in a high conversion of ASP, o‐phosphoric acid was the most suitable catalyst for yielding PSI with a high weight‐average molecular weight (M_w) in a quantitative conversion; that is, the M_w value was 24,000. For the continuous process using a twin‐screw extruder at 3.0 kg · h⁻¹ of the ASP feed rate, the conversion was greater than 99%, and the M_w value was 23,000 for the polycondensation with 10 wt % o‐phosphoric acid at 260°C. Sodium polyaspartate (PASP‐Na) originating from the acid‐catalyzed polycondensation exhibited high biodegradability and calcium‐ion‐chelating ability. The total organic carbon value was 86 ∼ 88%, and 100 g of PASP‐Na chelated with 5.5 ∼ 5.6 g of calcium ion, which was similar to the value for PASP‐Na from the acid‐catalyzed polycondensation with a mixed solvent © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 117–122, 2000     

Synthesis of π-conjugated poly(arylene)s by polycondensation of 1,4-bis(3-methylpyridin-2-yl)benzene and aryl dibromides through regiospecific C-H functionalization process

On the basis of the Ru-catalyzed regiospecific direct double arylation of benzene rings possessing 3-methylpyridin-2-yl substituents to produce 1-aryl-2-(3-methylpyridin-2-yl)benzene derivatives, the synthesis of poly(p-phenylene) derivatives having 2,5-bis(3-methylpyridin-2-yl) substituents is described. The reaction of 1,4-bis(3-methylpyridin-2-yl)benzene with bromobenzene (2 equiv) was carried out in the presence of [RuCl₂(η⁶-C₆H₆)]₂ (5 mol %) in 1-methyl-2-pyrrolidone at 120°C for 24 h to produce 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene in 99% yield as a sole product. Neither 2,6-diphenylated nor further phenylated products was produced under the examined conditions. This regiospecific double arylation process was then applied to the synthesis of π-conjugated polymers by use of aryl dibromides such as 1,4-dibromobenzene, 2,7-dibromo-9,9-dihexylfluorene, and 2,5-dibromothiophene. For example, a polymer was obtained in 73% yield by using 1,4-dibromobenzene, whose M_n and M_w/M_n were estimated to be 3300 and 1.51, respectively. The bathochromic shift of the ultraviolet (UV)–visible absorption spectrum with respect to that of the model compound, 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene, indicated the extension of the π-conjugation. The blue fluorescence was also observed for the polymer upon the UV irradiation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2771–2777