Halogenation and amination dual properties of haloamines in Raschig environment: A chlorine transfer reaction between chloramine and 3-azabicyclo[3,3,0]octane

The chlorine transfer reaction between 3-azabicyclo[3,3,0]octane “AZA” and chloramine was studied over pH 8–13 in order to follow both the amination and halogenation properties of NH₂Cl. The results show the existence of two competitive reactions which lead to the simultaneous formation of N-amino- and N-chloro- 3-azabicyclo[3,3,0]octane by bimolecular kinetics. The halogenation reaction is reversible and the chlorine derivative obtained, which is thermolabile and unstable in the pure state, was identified by electrospray mass spectrometry. These phenomena were quantified by a reaction between neutral species according to an apparent S_N2-type mechanism for the amination process and a ionic mechanism involving a reaction between chloramine and protonated amine for the halogenation process. Amination occurs only in strongly basic solutions (pH ≥ 13) while chlorination occurs at lower pH's (pH ≤ 8). At intermediate pH's, a mixture of these two compounds is obtained. The relative proportions of the products are a function of intrinsic rate constants, pH and pK_a of the reactants. The rate constants and thermodynamic activation parameters are the following: k₁ = 45.5 × 10⁻³ M⁻¹ s⁻¹; ΔH₁^0# = 59.8 kJ mol⁻¹; ΔS₁^0# = − 86.5 J mol⁻¹ K⁻¹ for amination; k₂ = 114 × 10⁻³ M⁻¹ s⁻¹; ΔH₂^0# = 63.9 kJ mol⁻¹; and ΔS₂^0# = − 48.3 J mol⁻¹ K⁻¹ for chlorination. The ability of an interaction corresponding to a specific (NH₃Cl⁺/RR′NH) or general (NH₂Cl/RR′NH) acid catalysis has been also discussed. © 1997 John Wiley & Sons, Inc.     

Ammonia–dimethylchloramine system: Kinetic approach in an aqueous medium and comparison with the mechanism involving liquid ammonia

After an exhaustive study of the system ammonia–dimethylchloramine in liquid ammonia, it was interesting to compare the reactivity of this system in liquid ammonia with the same system in an aqueous medium. Dimethylchloramine prepared in a pure state undergoes dehydrohalogenation in an alkaline medium: the principal products formed are N-methylmethanimine, 1,3,5-trimethylhexahydrotriazine, formaldehyde, and methylamine. The kinetics of this reaction was studied by UV, GC, and HPLC as a function of temperature, initial concentrations of sodium hydroxide, and chlorinated derivative. The reaction is of the second order and obeys an E2 mechanism (k₁ = 4.2 × 10⁻⁵ M⁻¹ s⁻¹, ΔH^○# = 82 kJ mol⁻¹, ΔS^○# = −59 J mol⁻¹ K⁻¹). The oxidation of unsymmetrical dimethylhydrazine by dimethylchloramine involves two consecutive processes. The first step follows a first-order law with respect to haloamine and hydrazine, leading to the formation of an aminonitrene intermediate (k₂ = 150 × 10⁻⁵ M⁻¹ s⁻¹). The second step corresponds to the conversion of aminonitrene into formaldehyde dimethylhydrazone at pH 13). This reaction follows a first-order law (k₃ = 23.5 × 10⁻⁵ s⁻¹). The dimethylchloramine–ammonia interaction corresponds to a SN2 bimolecular mechanism (k₄ = 0.9 × 10⁻⁵ M⁻¹ s⁻¹, pH 13, and T = 25°C). The kinetic model formulated on the basis of the above reactions shows that the formation of the hydrazine in an aqueous medium comes under strong competition from the dehydrohalogenation of dimethylchloramine and the oxidation of the hydrazine formed by the original chlorinated derivative. A global model that explains the mechanisms both in an anhydrous and in an aqueous medium was elaborated. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 340–351, 2008     

Kinetic study of the ligand substitution on the trimethylplatinum(iv) complexes with unidentate ligands

Ligand substitution kinetics for the reaction [Pt^IVMe₃(X)(NN)]+NaY=[Pt^IVMe₃(Y)(NN)]+NaX, where NN=bipy or phen, X=MeO⁻, CH₃COO⁻, or HCOO⁻, and Y=SCN⁻ or N₃⁻, has been studied in methanol at various temperatures. The kinetic parameters for the reaction are as follows. The reaction of [PtMe₃(OMe)(phen)] with NaSCN: k₁=36.1±10.0 s⁻¹; ΔH₁^≠=65.9±14.2 kJ mol⁻¹; ΔS₁^≠=6±47 J mol⁻¹ K⁻¹; k₋₂=0.0355±0.0034 s⁻¹; ΔH₋₂^≠=63.8±1.1 kJ mol⁻¹; ΔS₋₂^≠=−58.8±3.6 J mol⁻¹ K⁻¹; and k₋₁/k₂=148±19. The reaction of [PtMe₃(OAc)(bipy)] with NaN₃: k₁=26.2±0.1 s⁻¹; ΔH₁^≠=60.5±6.6 kJ mol⁻¹; ΔS₁^≠=−14±22 J mol⁻¹K⁻¹; k₋₂=0.134±0.081 s⁻¹; ΔH₋₂^≠=74.1±24.3 kJ mol⁻¹; ΔS₋₂^≠=−10±82 J mol⁻¹K⁻¹; and k₋₁/k₂=0.479±0.012. The reaction of [PtMe₃(OAc)(bipy)] with NaSCN: k₁=26.4±0.3 s⁻¹; ΔH₁^≠=59.6±6.7 kJ mol⁻¹; ΔS₁^≠=−17±23 J mol⁻¹K⁻¹; k₋₂=0.174±0.200 s⁻¹; ΔH₋₂^≠=62.7±10.3 kJ mol⁻¹; ΔS₋₂^≠=−48±35 J mol⁻¹K⁻¹; and k₋₁/k₂=1.01±0.08. The reaction of [PtMe₃(OOCH)(bipy)] with NaN₃: k₁=36.8±0.3 s⁻¹; ΔH₁^≠=66.4±4.7 kJ mol⁻¹; ΔS₁^≠=7±16 J mol⁻¹K⁻¹; k₋₂=0.164±0.076 s⁻¹; ΔH₋₂^≠=47.0±18.1 kJ mol⁻¹; ΔS₋₂^≠=−101±61 J mol⁻¹ K⁻¹; and k₋₁/k₂=5.90±0.18. The reaction of [PtMe₃(OOCH)(bipy)] with NaSCN: k₁ =33.5±0.2 s⁻¹; ΔH₁^≠=58.0±0.4 kJ mol⁻¹; ΔS₁^≠=−20.5±1.6 J mol⁻¹ K⁻¹; k₋₂=0.222±0.083 s⁻¹; ΔH₋₂^≠=54.9±6.3 kJ mol⁻¹; ΔS₋₂^≠=−73.0±21.3 J mol⁻¹ K⁻¹; and k₋₁/k₂=12.0±0.3. Conditional pseudo-first-order rate constant k₀ increased linearly with the concentration of NaY, while it decreased drastically with the concentration of NaX. Some plausible mechanisms were examined, and the following mechanism was proposed. [Note to reader: Please see article pdf to view this scheme.] © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 523–532, 1998     

Kinetics and mechanism of the reaction of sulphur(IV) with N,N′‐ethylene‐bis(sali‐cylidiniminato)manganese‐(III) in aqueous solution

The reaction of (diaqua)(N,N′‐ethylene‐bis(salicylidiniminato)manganese(III) with aqueous sulphite buffer results in the formation of the corresponding mono sulphito complex, [Mn(Salen)(SO₃)]⁻ (S‐bonded isomer) via three distinct paths: (i) Mn(Salen)(OH₂)₂⁺ + HSO₃⁻ → (k₁); (ii) Mn(Salen)(OH₂)₂⁺ + SO₃²⁻ → (k₂); (III) Mn(Salen)(OH₂)(OH) + SO₃²⁻ → (k₃) in the stopped flow time scale. The fact that the mono sulphito complex does not undergo further anation with SO₃²⁻/HSO₃⁻ may be attributed to the strong trans‐activating influence of the S‐bonded sulphite. The values of the rate constants (10⁻²k_i/dm² mol⁻¹ s⁻¹ at 25°C, I = 0.3 mol dm⁻³), ΔH_i^#/kJ mol⁻¹ and ΔS_i^#/J K⁻¹ mol⁻¹ respectively are: 2.97 ± 0.27, 42.4 ± 0.2, −55.3 ± 0.6 (i = 1); 11.0 ± 0.8, 33 ± 3, −75 ± 10 (i = 2); 20.6 ± 1.9, 32.4 ± 0.2, −72.9 ± 0.6 (i = 3). The trend in reactivity (k₂ > k₁), a small labilizing effect of the coordinated hydroxo group (k₃/k₂ < 2), and substantially low values of ΔS^# suggest that the mechanism of aqua ligand substitution of the diaqua, and aqua‐hydroxo complexes is most likely associative interchange (I_a). No evidence for the formation of the O‐bonded sulphito complex and the ligand isomerization in the sulphito complex, (Mn^III‐OSO₂ → Mn^III‐SO₃), ensures the selectivity of the Mn^III centre toward the S‐end of the S^IV species. The monosulphito complex further undergoes slow redox reaction in the presence of excess sulphite to produce Mn^II, S₂O₆²⁻ and SO₄²⁻. The formation of dithionate is a consequence of the fast dimerization of the SO₃₋. generated in the rate determining step and also SO₄²⁻ formation is attributed to the fast scavenging of the SO₃₋. by the Mn^III species via a redox path. The internal reduction of the Mn^III centre in the monosulphito complex is insignificant. The redox reaction of the monosulphitomanganese(III) complex operates via two major paths, one involving HSO₃₋ and the other SO₃²⁻. The electron transfer is believed to be outersphere type. The substantially negative values of activation entropies (ΔS^# = −(1.3 ± 0.2) × 10² and −(1.6 ± 0.2) × 10² J K⁻¹ mol⁻¹ for the paths involving HSO₃₋ and SO₃²⁻ respectively) reflect a considerable degree of ordering of the reactants in the act of electron transfer. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 627–635, 1999     

The kinetics and mechanisms of gas phase elimination of primary,secondary, and tertiary 2‐hydroxyalkylbenzenes

2‐Phenylethanol, racemic 1‐phenyl‐2‐propanol, and 2‐methyl‐1‐phenyl‐2‐propanol have been pyrolyzed in a static system over the temperature range 449.3–490.6°C and pressure range 65–198 torr. The decomposition reactions of these alcohols in seasoned vessels are homogeneous, unimolecular, and follow a first‐order rate law. The Arrhenius equations for the overall decomposition and partial rates of products formation were found as follows: for 2‐phenylethanol, overall rate log k₁(s⁻¹)=12.43−228.1 kJ mol⁻¹ (2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.97−249.2 kJ mol⁻¹ (2.303 RT)⁻¹, styrene formation log k₁(s⁻¹)=12.40−229.2 kJ mol⁻¹(2.303 RT)⁻¹, ethylbenzene formation log k₁(s⁻¹)=12.96−253.2 kJ mol⁻¹(2.303 RT)⁻¹; for 1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=13.03−233.5 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=13.04−240.1 kJ mol⁻¹(2.303 RT)⁻¹, unsaturated hydrocarbons+indene formation log k₁(s⁻¹)=12.19−224.3 kJ mol⁻¹(2.303 RT)⁻¹; for 2‐methyl‐1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=12.68−222.1 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.65−222.9 kJ mol⁻¹(2.303 RT)⁻¹, phenylpropenes formation log k₁(s⁻¹)=12.27−226.2 kJ mol⁻¹(2.303 RT)⁻¹. The overall decomposition rates of the 2‐hydroxyalkylbenzenes show a small but significant increase from primary to tertiary alcohol reactant. Two competitive eliminations are shown by each of the substrates: the dehydration process tends to decrease in relative importance from the primary to the tertiary alcohol substrate, while toluene formation increases. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 401–407, 1999     

Pulse radiolysis of butyl acrylate in aqueous solution

The pulse radiolysis of n-butyl acrylate (nBA) in aqueous solution was studied. The rate constant of the reaction of nBA with hydroxyl radicals was calculated as 1.5×10¹⁰ dm³ mol⁻¹ s⁻¹. The absorption spectrum of the OH^·–nBA adduct appeared to have a broad maximum at 300 nm. This spectrum was attributed to the α-carbon centred radicals. It decayed with the first-order rate constant k=1.5×10⁴ s⁻¹ (pH 10.8). The rate constant of the nBA reaction with hydrated electrons was determined as k=1.6×10¹⁰ dm³ mol⁻¹ s⁻¹. The spectrum of H^·–nBA adduct was similar to that recorded for OH^· adduct. It decayed with first-order kinetics at k=1.0×10⁴ s⁻¹. Spectra of the electron adduct were characterised by the band with a maximum at 285 nm (pH 10.0) or at 280 nm (pH 4.0) with ϵ=10 500 dm³ mol⁻¹ cm⁻¹. In acidic solution, radical anion formed upon addition of hydrated electrons to the nBA molecule, undergoes fast, reversible protonation. The decay of the reversibly protonated electron adduct was a second-order process at k=2.5×10⁹ dm³ mol⁻¹ s⁻¹. This reaction took place at the carbonyl oxygen. Slow, irreversible protonation of the electron adduct at high pH takes place at the β-carbon atom at k=2.9×10⁴ s⁻¹.     

Kinetics and mechanism study of aniline addition to ethyl propiolate

The kinetics of the addition reaction of aniline to ethyl propiolate in dimethylsulfoxide (DMSO) as solvent was studied. Initial rate method was used to determine the order of the reaction with respect to the reactants, and pseudo‐first‐order method was used to calculate the rate constant. This reaction was monitored by UV–Vis spectrophotometer at 399 nm by the variable time method. On the basis of the experimental results, the Arrhenius equation for this reaction was obtained as log k = 6.07 ‐ (12.96/2.303 RT). The activation parameters, E_a, ΔH^#, ΔG^#, and ΔS^# at 300 K were 12.96, 13.55, 23.31 kcal mol^?1 and ?32.76 cal mol^?1 K^?1, respectively. The results revealed a first‐order reaction with respect to both aniline and ethyl propiolate. In addition, based on the experimental results and using also density functional theory (DFT) at B3LYP/6‐31G* level, a mechanism for this reaction was proposed. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 144–151, 2006     

Kinetics of dehydrohalogenation of N-chloro-3-azabicyclo[3,3,0]octane in alkaline medium. NMR and ES/MS evidence of the dimerization of 3-azabicyclo[3,3,0]oct-2-ene

The formation of 3-azabicyclo[3,3,0]oct-2-ene in the course of the synthesis of N-amino-3-azabicyclo[3,3,0]octane using the Raschig process results from the following two consecutive reactions: chlorine transfer between the monochloramine and the 3-azabicyclo[3,3,0]octane followed by a dehydrohalogenation of the substituted haloamine. The kinetics of the reaction were studied by HPLC and UV as a function of temperature (15 to 44°C), and the concentrations of NaOH (0.1 to 1 M) and the chlorinated derivative (1 to 4×10⁻³ M). The reaction is bimolecular (k=103×10⁻⁶ M⁻¹ s⁻¹; ΔH^0#=89 kJ mol⁻¹; and ΔS^0#=−33.6 J mol⁻¹ K⁻¹) and has an E2 mechanism. The spectral data of 3-azabicyclo[3,3,0]oct-2-ene were determined. IR, NMR, and ES/MS analysis show dimerization of the water-soluble monomer into a white insoluble dimer. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 129–136, 1998.     

氢过碘酸）合银（III）配离子氧化L-脯氨酸的反应动力学及机理

L-脯氨酸独有的亚胺基使其在生物医药领域具有许多独特的功能,并广泛用作不对称有机化合物合成的有效催化剂。本文在碱性介质中研究了二（氢过碘酸）合银（III）配离子氧化 L-脯氨酸的反应。经质谱鉴定,脯氨酸氧化后的产物为脯氨酸脱羧生成的 γ-氨基丁酸盐;氧化反应对脯氨酸及Ag(III) 均为一级;二级速率常数 k′ 随 [IO₄^-] 浓度增加而减小,而与 [OHˉ] 的浓度几乎无关;推测反应机理应包括 [Ag(HIO₆)₂]^5-与 [Ag(HIO₆)(H₂O)(OH)]^2-之间的前期平衡,两种Ag（III）配离子均作为反应的活性组分,在速控步被完全去质子化的脯氨酸平行地还原,两速控步对应的活化参数为： k₁ (25 ^oC)＝1.87±0.04（mol·L^-1)^-1s^-1,∆ H₁^≠＝45±4 kJ · mol^-1, ∆ S₁^≠＝-90±13 J· K^-1·mol^-1 and k₂ (25 ^oC) ＝3.2±0.5（mol·L^-1)^-1s^-1, ∆ H₂^≠＝34±2 kJ · mol^-1, ∆ S₂^≠＝-122 ±10 J· K^-1·mol^-1。本文第一次发现 [Ag(HIO₆)₂]^5-配离子也具有氧化反应活性。     

Kinetic study of the reactions Br + IBr→I + Br2 and I + Br2→Br + IBr

The kinetics of the title reactions have been studied using the discharge-flow mass spectrometic method at 296 K and 1 torr of helium. The rate constant obtained for the forward reaction Br+IBr→I+Br₂ (1), using three different experimental approaches (kinetics of Br consumption in excess of IBr, IBr consumption in excess of Br, and I formation), is: k₁=(2.7±0.4)×10⁻¹¹ cm³ molecule⁻¹s⁻¹. The rate constant of the reverse reaction: I+Br₂→Br+IBr (−1) has been obtained from the Br₂ consumption rate (with an excess of I atoms) and the IBr formation rate: k₋₁=(1.65±0.2)×10⁻¹³ cm³molecule⁻¹s⁻¹. The equilibrium constant for the reactions (1,−1), resulting from these direct determinations of k₁ and k₋₁ and, also, from the measurements of the equilibrium concentrations of Br, IBr, I, and Br₂, is: K₁=k₁/k₋₁=161.2±19.7. These data have been used to determine the enthalpy of reaction (1), ΔH₂₉₈°=−(3.6±0.1) kcal mol⁻¹ and the heat of formation of the IBr molecule, ΔH_f,298°(IBr)=(9.8±0.1) kcal mol⁻¹. © 1998 John Wiley & sons, Inc. Int J Chem Kinet 30: 933–940, 1998     

Kinetics of the bromate–bromide reaction at high bromide concentrations

At bromide concentrations higher than 0.1 M, a second term must be added to the classical rate law of the bromate–bromide reaction that becomes ?d[BrO₃^?]/dt = [BrO₃^?][H⁺]²(k₁[Br^?] + k₂[Br^?]²). In perchloric solutions at 25°C, k₁ = 2.18 dm³ mol^?3 s^?1 and k₂ = 0.65 dm⁴ mol^?4 s^?1 at 1 M ionic strength and k₁ = 2.60 dm³ mol³ s^?1and k₂ = 1.05 dm⁴ mol^?4 s^?1 at 2 M ionic strength. A mechanism explaining this rate law, with Br₂O₂ as key intermediate species, is proposed. Errors that may occur when using the Guggenheim method are discussed. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 39: 17–21, 2007     

Echinops bannaticus plant and Zinnia grandiflora extract as char biosource and reducing agent for the biosynthesis of Ag on magnetic char-polymer: An efficient catalyst for water treatment

In attempt to expand the use of natural compounds for waste treatment, a novel catalyst with the utility for dye reductive degradation is reported. In the catalyst synthesis procedure, the plant Echinops bannaticus was applied as a biosource and hydrothermally treated to furnish a hydrochar that served as a support. The latter was magnetized, vinyl functionalized, and then polymerized with copolymer of 2-hydroxyethyl methacrylate and methacrylate polyhedral oligomeric silsesquioxane. Subsequently, Ag nanoparticles were stabilized on the resultant composite with the aid of Zinnia grandiflora extract as a natural reducing agent. The resulting catalyst displayed high catalytic activity for the reduction of methylene orange and rhodamine B dyes in aqueous media at room temperature. The effects of the reaction variables, including the reaction time and temperature, and the catalyst loading, were examined and the kinetic and thermodynamic terms for both reactions were evaluated. E_a, ΔH^#, and ΔS^# values for the reduction of methyl orange were estimated as 50.0 kJ/mol, 51.50 kJ/mol, and −102.42 J mol⁻¹ K⁻¹, respectively. These values for rhodamine B were measured as 28.0 kJ/mol, 25.5 kJ/mol, and −187.56 J mol⁻¹ K⁻¹, respectively. The recyclability test also affirmed that the catalyst was recyclable for several runs with insignificant Ag leaching and decrement of its activity.     

Pulse radiolysis and product analysis of triethylsilane in methanol

The transients resulting from triethylsilane (R₃SiH) in airfree high purity methanol were studied by pulse radiolysis. Their total absorption spectrum shows a maximum at 265 nm (ϵ₂₆₅ = 5300 dm³mol⁻¹cm⁻¹) and disappears by a second order reaction with a rate constant of 2k = 9.3±10⁹dm³mol⁻¹s⁻¹. R₃SiH reacts with solvated electrons (e^-_s) in methanol with k = 9.2±0.2) × 10⁸dm³mol⁻¹s⁻¹. The R₃S̊i radicals react selectively and efficiently with the CH₃O̊ and C̊H₂OH species resulting in the formation of triethylmethoxysilane (R₃Si-OCH₃) and triethylsilylmethanol (R₃Si-C̊H₂OH), respectively. R₃Si-OC̊H₃ is subsequently converted into various final products which were identified and their yields determined. A reaction mechanism is suggested for the explanation of the rather complicated reactions pathways.     

Estimation of activation parameters for the propagation rate constant of styrene

For a temperature range of −11.8–92.6°C, the propagation rate constant k_p of styrene has been determined with the use of pulsed-laser polymerization (PLP). The temperature dependency of the obtained k_p data was evaluated using the Arrhenius equation. The NLLS error-in-variables method (EVM) is recommended for this fit. The resulting activation energy is 32.6 kJ mol⁻¹ and the pre-exponential factor is 10^7.66 dm³ mol⁻¹ s⁻¹. A joint confidence interval for these parameters is given. © 1996 John Wiley & Sons, Inc.     

Kinetics and Mechanism Study of the Substitution Reactions of the Chloride Ligand in Dichloro(5,10,15,20)‐tetraphenyl‐21H,23H‐porphinato)tin(IV) by Organic Bases in Dimethylformamide Solvent

Substitution reactions of a Cl⁻ ligand in [SnCl₂(tpp)] (tpp=5,10,15,20‐tetraphenyl‐21H,23H‐porphinato(2−)) by five organic bases i.e., butylamine (BuNH₂), sec‐butylamine (^sBuNH₂), tert‐butylamine (^tBuNH₂), dibutylamine (Bu₂NH), and tributylamine (Bu₃N), as entering nucleophile in dimethylformamide at I=0.1M (NaNO₃) and 30–55° were studied. The second‐order rate constants for the substitution of a Cl⁻ ligand were found to be (36.86±1.14)⋅10⁻³, (32.91±0.79)⋅10⁻³, (22.21±0.58)⋅10⁻³, (19.09±0.66)⋅10⁻³, and (1.36±0.08)⋅10⁻³ M ⁻¹s⁻¹ at 40° for BuNH₂, ^tBuNH₂, ^sBuNH₂, Bu₂NH, and Bu₃N, respectively. In a temperature‐dependence study, the activation parameters ΔH^≠ and ΔS^≠ for the reaction of [SnCl₂(tpp)] with the organic bases were determined as 38.61±4.79 kJ mol⁻¹ and −150.40±15.46 J K⁻¹mol⁻¹ for BuNH₂, 40.95±4.79 kJ mol⁻¹ and −143.75±15.46 J K⁻¹mol⁻¹ for ^tBuNH₂, 30.88±2.43 kJ mol⁻¹ and −179.00±7.82 J K⁻¹mol⁻¹ for ^sBuNH₂, 26.56±2.97 kJ mol⁻¹ and −194.05±9.39 J K⁻¹mol⁻¹ for Bu₂NH, and 39.37±2.25 kJ mol⁻¹ and −174.68±7.07 J K⁻¹ mol⁻¹ for Bu₃N. From the linear rate dependence on the concentration of the bases, the span of k₂ values, and the large negative values of the activation entropy, an associative (A) mechanism is deduced for the ligand substitution.     

Kinetic study of triphenylphosphine addition to para‐benzoquinone

Kinetics of the addition reaction of triphenylphosphine to para‐benzoquinone in 1,2‐dichloroethane as solvent was studied. Initial rate method was used to determine the order of the reaction with respect to the reactants. Pseudo‐first‐order method was also used to calculate the rate constant. This reaction was monitored by UV‐vis spectrophotometry at 520 nm by variable time method. On the basis of the obtained results, the Arrhenius equation of this reaction was obtained: The activation parameters, E_a, ΔH^#, ΔG^#, and ΔS^# at 300 K were 5.701, 6.294, 19.958 kcal mol^?1 and ?45.853 cal mol^?1 K^?1, respectively. This reaction is first and second order with respect to triphenylphosphine and para‐benzoquinone, respectively. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36:472–479, 2004     

A laser flash photolysis kinetic study of reactions of the Cl2− radical anion with oxygenated hydrocarbons in aqueous solution

A laser photolysis–long path laser absorption (LP‐LPLA) experiment has been used to determine the rate constants for H‐atom abstraction reactions of the dichloride radical anion (Cl₂⁻) in aqueous solution. From direct measurements of the decay of Cl₂⁻ in the presence of different reactants at pH = 4 and I = 0.1 M the following rate constants at T = 298 K were derived: methanol, (5.1 ± 0.3)·10⁴ M⁻¹ s⁻¹; ethanol, (1.2 ± 0.2)·10⁵ M⁻¹ s⁻¹; 1‐propanol, (1.01 ± 0.07)·10⁵ M⁻¹ s⁻¹; 2‐propanol, (1.9 ± 0.3)·10⁵ M⁻¹ s⁻¹; tert.‐butanol, (2.6 ± 0.5)·10⁴ M⁻¹ s⁻¹; formaldehyde, (3.6 ± 0.5)·10⁴ M⁻¹ s⁻¹; diethylether, (4.0 ± 0.2)·10⁵ M⁻¹ s⁻¹; methyl‐tert.‐butylether, (7 ± 1)·10⁴ M⁻¹ s⁻¹; tetrahydrofuran, (4.8 ± 0.6)·10⁵ M⁻¹ s⁻¹; acetone, (1.41 ± 0.09)·10³ M⁻¹ s⁻¹. For the reactions of Cl₂⁻ with formic acid and acetic acid rate constants of (8.0 ± 1.4)·10⁴ M⁻¹ s⁻¹ (pH = 0, I = 1.1 M and T = 298 K) and (1.5 ± 0.8) · 10³ M⁻¹ s⁻¹ (pH = 0.42, I = 0.48 M and T = 298 K), respectively, were derived. A correlation between the rate constants at T = 298 K for all oxygenated hydrocarbons and the bond dissociation energy (BDE) of the weakest C‐H‐bond of log k_2nd = (32.9 ± 8.9) − (0.073 ± 0.022)·BDE/kJ mol⁻¹ is derived. From temperature‐dependent measurements the following Arrhenius expressions were derived: k (Cl₂⁻ + HCOOH) = (2.00 ± 0.05)·10¹⁰·exp(−(4500 ± 200) K/T) M⁻¹ s⁻¹, E_a = (37 ± 2) kJ mol⁻¹ k (Cl₂⁻ + CH₃COOH) = (2.7 ± 0.5)·10¹⁰·exp(−(4900 ± 1300) K/T) M⁻¹ s⁻¹, E_a = (41 ± 11) kJ mol⁻¹ k (Cl₂⁻ + CH₃OH) = (5.1 ± 0.9)·10¹²·exp(−(5500 ± 1500) K/T) M⁻¹ s⁻¹, E_a = (46 ± 13) kJ mol⁻¹ k (Cl₂⁻ + CH₂(OH)₂) = (7.9 ± 0.7)·10¹⁰·exp(−(4400 ± 700) K/T) M⁻¹ s⁻¹, E_a = (36 ± 5) kJ mol⁻¹ Finally, in measurements at different ionic strengths (I) a decrease of the rate constant with increasing I has been observed in the reactions of Cl₂⁻ with methanol and hydrated formaldehyde. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 169–181, 1999     

Scavenging of reactive oxygen radicals by resveratrol: antioxidant effect

Pulse radiolysis of resveratrol was carried out in aqueous solutions at pH ranging from 6.5 to 10.5. The one-electron oxidized species formed by the N^•₃ radicals at pH 6.5 and 10.5 were essentially the same with λ_max at 420 nm and rate constant varying marginally (k = (5−6.5) × 10⁹ dm³ mol⁻¹ s⁻¹). The nature of the transients formed by NO^•₂, NO^• radical reaction at pH 10.5 was the same as that with N^•₃, due to the similarity in decay rates and the absorption maximum. Reaction of ^•OH radical with resveratrol at pH 7 gives an absorption maximum at 380 nm, attributed to the formation of carbon centered radical. The repair rates for the thymidine and guanosine radicals by resveratrol were approx. 1 × 10⁹ dm³ mol⁻¹ s⁻¹, while the repair rate for tryptophan was lower by nearly an order of magnitude (k = 2 × 10⁸ dm³ mol⁻¹ s⁻¹). The superoxide radical anion was scavenged by resveratrol, as well as by the Cu–resveratrol complex with k = 2 × 10⁷ and 1.5 × 10⁹ dm³ mol⁻¹ s⁻¹, respectively. Its reduction potential was also measured by cyclic voltammetry.     

The catalytic reduction of nitrobenzene at the [MoVIO2(O2CC(S)(C6H5)2)2]2− complex intercalated in a Zn(II)–Al(III) layered double hydroxide host: A kinetic model for the molybdenum–pterin binding site in nitrate reductase

The heterogeneous reduction of nitrobenzene by thiophenol catalyzed by the dianionic bis(2‐sulfanyl‐2,2‐diphenylethanoxycarbonyl) dioxomolybdate(VI) complex, [Mo^VIO₂(O₂CC(S)(C₆H₅)₂)₂]²⁻, intercalated into a Zn(II)–Al(III) layered double hydroxide host [Zn_3−xAl_x(OH)₆]^x+, has been investigated under anaerobic conditions. Aniline was found to be the only product formed through a reaction consuming six moles of thiophenol for each mol of aniline produced. The kinetics of the system have been analyzed in detail. In excess of thiophenol, all reactions follow first‐order kinetics (ln([PhNO₂]/[PhNO₂]₀) = −k_appt) with the apparent rate constant k_app being a complex function of both initial nitrobenzene and thiophenol concentrations, as well as linearly dependent on the amount of solid catalyst used. A mechanism for this catalytic reaction consistent with the kinetic experiments as well as the observed properties of the intercalated molybdenum complex has thiophenol inducing the initial coupled proton–electron transfer steps to form an intercalated Mo^IV species, which is oxidized back to the parent Mo^VI complex by nitrobenzene via a two‐electron oxygen atom transfer reaction that yields nitrosobenzene. This mechanism is widespread in enzymatic catalysis and in model chemical reactions. The intermediate nitrosobenzene thus formed is reduced directly by excess thiophenol to aniline. The values of rate coefficients indicate that reduction of nitrobenzene proceeds much faster than proton‐assisted oxidation of thiophenol. This may account for the observation that the presence of protonic amberlite IR‐120(H) increases considerably the rate of the overall reaction catalyzed. Activation parameters in excess of the protonic resin and PhSH were ΔH^≠ = 80 kJ mol⁻¹ and ΔS^≠ = −70 J mol⁻¹ K⁻¹. The large negative activation entropy is consistent with an associative transition state. The present system is characterized by a well‐defined catalytic cycle with multiple‐turnovers reductions of nitrobenzene to aniline without appreciable deactivation. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 212–224, 2001     

Investigation of kinetic and mechanism of triphenylphosphine addition to para‐naphthoquinone

This work reports the results of a kinetic and mechanistic investigations of the addition reaction of triphenylphosphine to para‐naphtoquinone in 1,2‐dichloromethane as solvent. The order of reaction with respect to the reactants was determined using initial rate method, and the rate constant was obtained on the basis of pseudo‐first‐order method. Variable time method using Uv–Vis spectrophotometry (at 400 nm) was utilized for monitoring this addition reaction, for which the following Arrhenius equation was obtained: The resulting activation parameters E_a, ΔH^#, ΔG^#, and ΔS^# at 300 K were 13.63, 14.42, 18.75 kcal mol^?1, and ?14.54 cal mol^?1K^?1, respectively. The results suggest that the reaction is first order with respect to both triphenylphosphine and para‐naphthoquinone. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 427–433, 2005