金属离子(Na~+、K~+、Ca~(2+)、Mg~(2+)、Zn~(2+))与鸟嘌呤异构体配合物的稳定性

在B3LYP/6-311++G**水平上用极化连续介质模型(PCM)系统研究了金属离子(M+/2+=Na+,K+,Ca2+,Mg2+,Zn2+)和十三种鸟嘌呤异构体形成的配合物GnxM+/2+(n为鸟嘌呤异构体的编号,x表示M+/2+与鸟嘌呤异构体的结合位点)在气(g)液(a)两相中的稳定性顺序.着重探讨了液相中配合物的稳定性差异,并且从溶质-溶剂效应、结合能、形变能及异构体的相对能量等几个方面分析了造成稳定顺序发生变化的原因.报道了溶液中这五种金属离子与鸟嘌呤异构体结合形成的六种基态配合物:aG1N2,N3Na+,aG1N2,N3K+,aG1O6,N7Ca2+,aG1N2,N3Mg2+(aG1O6,N7Mg2+),aG2N3,N9Zn2+.可以看出,除了在Zn2+配合物中鸟嘌呤异构体为G2外,构成其余四种金属离子配合物的鸟嘌呤异构体都是G1,但结合位点不同.同时对气相中各类配合物稳定性也进行了系统的排序,并报道了几种较稳定的配合物,如:gG3N1,O6K+,gG5N1,O6K+,gG3N1,O6Ca2+/Mg2+,gG4O6,N7Ca2+/Mg2+.     

Transport of Ca2+, Sr2+, Ba2+, Na+, K+ and Cs+ through hollow fiber supported liquid membrane

The transport of metal ions (Ca²⁺, Sr²⁺, Ba²⁺, Na⁺, K⁺, Cs⁺) through hollow fiber supported dichlorobenzene liquid membrane has been studied. The transport of cations using 8-crown-6 ether as a carrier and picrate as co-counter ion as well as a pertraction device and capillary isotachophoresis (ITP) measurement of the cation concentration is described.     

A Thermodynamic Study Between 18-Crown-6 with Mg2+, Ca2+, Sr2+and Ba2+ Cations in Water–Methanol and Water–Ethanol Binary Mixtures Using The Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations with the macrocyclic ligand, 18-Crown-6 (l8C6) in water–methanol (MeOH) binary systems as well as the complexation reactions between Ca²⁺ and Sr²⁺ cations with 18C6 in water–ethanol (EtOH) binary mixtures have been studied at different temperatures using conductometric method. The conductance data show that the stoichiometry of all the complexes is 1:1. It was found that the stability of 18C6 complexes with Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations is sensitive to solvent composition and in all cases, a non-linear behaviour was observed for the variation of log K _f of the complexes versus the composition of the mixed solvents. In some cases, the stability order is changed with changing the composition of the mixed solvents. The selectivity order of 18C6 for the metal cations in pure methanol is: Ba²⁺ > Sr²⁺ > Ca²⁺ > Mg²⁺. The values of thermodynamic parameters (Δ H _c ° and Δ S _c °) for formation of 18C6–Mg²⁺, 18C6–Ca²⁺, 18C6–Sr²⁺ and 18C6–Ba²⁺complexes were obtained from temperature dependence of the stability constants. The obtained results show that the values of (Δ H _c ° and Δ S _c °) for formation of these complexes are quite sensitive to the nature and composition of the mixed solvent, but they do not vary monotonically with the solvent composition.This revised version was published online in July 2005 with a corrected issue number.     

Effect of Sr2+ doping on the luminescence properties of YVO4:Eu3+,Sr2+ particles prepared by a solvothermal method

Well-dispersed Eu³⁺ and Sr²⁺ co-doped YVO₄ luminescent particles (YVO₄:Eu³⁺,Sr²⁺) on the submicron scale were prepared by a facile solvothermal method at low temperature. The effect of Sr²⁺ doping on the luminescence of YVO₄:Eu³⁺,Sr²⁺ particles was investigated by fixing the Eu³⁺ doping concentration at 7 mol%. It was found that the luminescence intensity of the as-prepared YVO₄:Eu³⁺,Sr²⁺ particles increased with the Sr²⁺ doping concentration x to reach a two-fold enhancement when x = 5 %, and then decreased for higher x. We also investigated the effect of thermal annealing on the luminescence properties of the YVO₄:Eu³⁺ and YVO₄:Eu³⁺,Sr²⁺ particles. A remarkable enhancement in their luminescence properties was observed after annealing at 900 °C in air for 30 min. It was showed that the annealed YVO₄:Eu³⁺,Sr²⁺ particles exhibited a two-fold stronger emission than the annealed YVO₄:Eu³⁺. This work indicates that Sr²⁺ doping is beneficial to the luminescence enhancement for both the as-prepared and annealed YVO₄:Eu³⁺,Sr²⁺ particles.     

Synthesis,spectroscopic characterization and study the effect of gamma irradiation on VO2+, Mn2+, Zn2+, Ru3+, Pd2+, Ag+ and Hg2+ complexes and antibacterial activities

Novel complexes of VO²⁺, Mn²⁺, Zn²⁺, Ru³⁺, Pd²⁺, Ag⁺ and Hg²⁺ have been prepared by reacting their metal salts with ligand, named (4-(4-chlorophenyl)-1-(2-(phenylamino) acetyl) thiosemicarbazone). Study of synthesized metal complexes was confirmed by different analytical and spectral techniques (¹H NMR, MS, FT-IR, UV–Vis, EPR and Powder X-ray diffraction), thermogravimetric studies as well as molecular modeling. FT-IR spectra showed that the compound behave as neutral or monobasic tetradentate. In case of complexes of Mn²⁺, Zn²⁺, Ag⁺ and VO²⁺, through (N2H), (CO) or (CO) groups. While, the ligand behave as neutral bidentate in case of complexes with Pd²⁺ and Hg²⁺. X-ray diffraction pattern of Mn²⁺, Pd²⁺ and Ag⁺ complexes before and after irradiation are recorded. XRD studies exhibited that decrease in the crystalline size of sample Mn²⁺ as compared of samples Ag⁺ and Pd²⁺ upon irradiation and irradiation influenced the crystallinity of the complexes. The possible structures of the ligand, Mn²⁺, Pd²⁺ and Hg²⁺complexes have been computed by means of the molecular mechanic calculations using the hyper chem. 8.03 molecular modeling program. The bond length, bond angle, HOMO, LUMO and dipole moment have been studied to verify the geometry of Mn²⁺, Pd²⁺ and Hg²⁺ complexes. The effect of gamma irradiation was investigated by recording the new results of pervious spectroscopic techniques and other measurements. Thermal studies of these chelates before and after γ-irradiation showed that the complexes after γ-irradiation were more thermally stable than before γ-irradiation. The compound and its metal complexes have been experienced for their inhibitory outcome on the growth of microorganisms against gram positive and gram negative. The results proved that the complexes B₁–B₇ have potent antibacterial activity as compared to that of ligand.     

Surface characterization and thermodynamics of adsorption of Sr2+, Ce3+, Sm3+, Gd3+, Th4+, UO 2 2+ on activated charcoal from aqueous solution

Surface parameters of the activated charcoal were measured using precise instrumental techniques for dehydration, carbon content, trace metals impurities, anions, bulk, tap and true densities, surface area, pore volume, porosity and average particle diameter. The adsorption of Sr²⁺, Ce³⁺, Sm³⁺, Gd³⁺, Th⁴⁺ and UO ₂ ²⁺ ions on activated charcoal from aqueous solution was studied as a function of temperature. Thermodynamic parameters such as HH ⁰ and S ⁰ were calculated from the slopes and intercepts of the linear variation of lnK ₁ vs. 1/T, whereK ₃ is obtained from Langmuir equation. The results show endothermic heats of adsorption, but negative free energy values indicate that the adsorption process of metal ions on activated charcoal is favored at high temperature. The value of isosteric heat of adsorption, calculated from the Clausius-Clapeyron equation, shows that the surface of the activated charcoal is heterogeneous with respect to activity. A wavelength dispersive x-ray fluorescence spectrometer was used for measuring the concentration of metal ions.     

Theoretical study of interaction of 2,6-dithiopurine with Li+, Na+, K+, Be2+, Mg2+, and Ca2+ metal cations

The geometries of the complexes of Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺ metal cations with different possible 2,6-dithiopurine anions (DTP) were studied. The complexes were optimized at the B3LYP level and the 6-311++G(d, p) basis set. The interactions of the metal cations at different nucleophilic sites of various possible 2,6-dithiopurine anions were considered. It was revealed that metal cations would interact with 2,6-dithiopurine anions in a bicoordinate manner. In the gas phase, the most preferred position for the interaction of Li⁺, Na⁺, and K⁺ cations is between the N₃ and S₂ sites, while all divalent cations Be²⁺, Mg²⁺, and Ca²⁺ prefer binding between the N₇ and S₆ sites of the corresponding 2,6-dithiopurine. The influence of aqueous solvent on the relative stability of different complexes has been examined using the Tomasi’s polarized continuum model. The basis set superposition error (BSSE) corrected interaction energy was also computed for complexes. The AIM theory has been applied to analyze the properties of the bond critical points (electron densities and their Laplacians) involved in the coordination between 2,6-dithiopurine anions and the metal cations. It was revealed that aqueous solution would have significant effect on the relative stability of complexes obtained by the interaction of 2,6-dithiopurine anions with Mg²⁺ and Ca²⁺ cations. The effect of metal cations on different NH and CS stretching vibrational modes of 2,6-dithiopurine has also been discussed.     

Research on Molecular Structure and Electronic Properties of Ln3+ (Ce3+, Tb3+, Pr3+)/Li+ and Eu2+ Co-Doped Sr2Si5N8 via DFT Calculation

We use density functional theory (DFT) to study the molecular structure and electronic band structure of Sr₂Si₅N₈:Eu²⁺ doped with trivalent lanthanides (Ln³⁺ = Ce³⁺, Tb³⁺, Pr³⁺). Li⁺ was used as a charge compensator for the charge imbalance caused by the partial replacement of Sr²⁺ by Ln³⁺. The doping of Ln lanthanide atom causes the structure of Sr₂Si₅N₈ lattice to shrink due to the smaller atomic radius of Ln³⁺ and Li⁺ compared to Sr²⁺. The doped structure’s formation energy indicates that the formation energy of Li⁺, which is used to compensate for the charge imbalance, is the lowest when the Sr2 site is doped. Thus, a suitable Li⁺ doping site for double-doped lanthanide ions can be provided. In Sr₂Si₅N₈:Eu²⁺, the doped Ce³⁺ can occupy partly the site of Sr₁²⁺ ([SrN₈]), while Eu²⁺ accounts for Sr₁²⁺ and Sr₂²⁺ ([SrN₁₀]). When the Pr³⁺ ion is selected as the dopant in Sr₂Si₅N₈:Eu²⁺, Pr³⁺ and Eu²⁺ would replace Sr₂²⁺ simultaneously. In this theoretical model, the replacement of Sr²⁺ by Tb³⁺ cannot exist reasonably. For the electronic structure, the energy level of Sr₂Si₅N₈:Eu²⁺/Li⁺ doped with Ce³⁺ and Pr³⁺ appears at the bottom of the conduction band or in the forbidden band, which reduces the energy bandgap of Sr₂Si₅N₈. We use DFT+U to adjust the lanthanide ion 4f energy level. The adjusted 4f-CBM of Ce_Sr1Li_Sr1-Sr₂Si₅N₈ is from 2.42 to 2.85 eV. The energy range of 4f-CBM in Pr_Sr1Li_Sr1-Sr₂Si₅N₈ is 2.75–2.99 eV and its peak is 2.90 eV; the addition of Ce³⁺ in Eu_Sr1Ce_Sr1Li_Sr1 made the 4f energy level of Eu²⁺ blue shift. The addition of Pr³⁺ in Eu_Sr2Pr_Sr2Li_Sr1 makes part of the Eu²⁺ 4f energy level blue shift. Eu²⁺ 4f energy level in Eu_Sr2Ce_Sr1Li_Sr1 is not in the forbidden band, so Eu²⁺ is not used as the emission center.     

Effect of matrix modifier and furnace material on the determination of traces of fluoride by electrothermal molecular absorption spectrometry of aluminum monofluoride

In the determination of fluoride by AlF absorbance measurements, the interference from strontium nitrate is avoided by using magnesium nitrate or barium nitrate added to aluminum solution as the matrix modifier. The effects of the graphite-furnace material on AlF absorbance are investigated. Glassy carbon and synthetic carbon gave longer furnace lifetimes and better sensitivity than the other materials tested. The maximum sensitivity (4.2 μg ml^?1 fluoride for 0.0044 absorbance with a 10-μl injection) was obtained with synthetic carbon. The r.s.d, was <5% for 0.1 μg ml^?1 fluoride (n=10). Na⁺, K⁺, Pb²⁺, Zn²⁺, Cu²⁺ and Ag⁺ did not affect the measurements up to 500 μg ml^?1, but Ni²⁺, Co²⁺, Fe²⁺, Sr²⁺ and especially Ca²⁺ depressed the absorbance.     

Crystal Chemistry of the M11+,2+–M22+,3+–(H)‐Arsenites: the First Cadmium(II) Arsenite,Na4Cd7(AsO3)6

The crystal structures among M1–M2–(H)‐arsenites (M1 = Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Ca²⁺, Sr²⁺, Ba²⁺, Cd²⁺, Pb²⁺; M2 = Mg²⁺, Mn^2+,3+, Fe^2+,3+, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺) are less investigated. Up to now, only the structure of Pb₃Mn(AsO₃)₂(AsO₂OH) was described. The crystal structure of hydrothermally synthesized Na₄Cd₇(AsO₃)₆ was solved from the single‐crystal X‐ray diffraction data. Its trigonal crystal structure [space group R$\bar{3}$ , a = 9.5229(13), c = 19.258(4) Å, γ = 120°, V = 1512.5(5) ų, Z = 3] represents a new structure type. The As atoms are arranged in monomeric (AsO₃)^3– units. The surroundings of the two crystallographically unique sodium atoms show trigonal antiprismatic coordination, and two mixed Cd/Na sites are remarkably unequal showing tetrahedral and octahedral coordinations. Despite the 3D connection of the AsO₃ pyramids, (Cd,Na)O_x polyhedra and NaO₆ antiprisms, a layer‐like arrangement of the Na atoms positioned in the hexagonal channels formed by CdO₄ deformed tetrahedra and AsO₃ pyramids in z = 0, 1/3, 2/3 is to be mentioned. These pseudo layers are interconnected to the 3D network by (Cd,Na)O₆ octahedra. Raman spectra confirmed the presence of isolated AsO₃ pyramids.     

Extraction separation of Cs+, Sr2+ and Ba2+ from a mixture of cations forming stable non-extractable complexes with ethylenediamine-N,N, N′,N′-tetraacetic acid in the water-nitrobenzene system

In the two-hase water-nitrobenzene extraction system, a method for gradual separation of Cs⁺, Sr²⁺ and Ba²⁺ from the mixture of cations forming stable non-extractable complexes with ethylenediamine-N, N, N,N-tetraacetic acid in the presence of the sodium salt of dicarbollylcobaltate anion {[-(3)-1, 2-B₉C₂H₁₁]₂ Co(III)}^– and polyethylene glycol ligand with a mean relative molecular mass of 400 (PEG 400), respectively, was developed. In the first extraction step, Cs⁺ was extracted into the organic phase while the other cations studied (Ca²⁺, Sr²⁺, Ba²⁺, Zn²⁺, Co²⁺, Ce³⁺) remained in the aqueous phase. In the second extraction step, Sr²⁺ and Ba²⁺ were extracted into the nitrobenzene phase. Finally, in the following reextraction step, Sr²⁺ was transferred into the aqueous phase while Ba²⁺ remained in the organic phase.     

NMR study of the stoichiometry and stability of complexation reaction between Mg2+, Ca2+, Sr2+ and Ba2+ ions and 60-crown-20 in binary acetonitrile solvent mixtures

Proton nuclear magnetic resonance (¹H-NMR) spectroscopy was used to study the complexation reaction between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ ions and 60-crown-20 in a series of binary mixtures of deuterated acetonitrile (AN), nitromethane (NM) and D₂O at 27?°C. Formation constants of the 1:1 complexes were determined through computer fitting of the chemical shift/mol ratio data and found to vary in the order of Ba²⁺?>?Sr²⁺?>?Mg²⁺?≈?Ca²⁺. The influence of the solvent composition on the stability of the resulting complexes was also discussed. In all cases, the changes in the stability constants with the solvent composition were monotonic and showed a good correlation with the inherent solvation ability of the pure solvents which form the mixture.     

Untersuchung der Komplexierung von Na+, K+, Ca2+ und Ba2+ mit einigen elektrisch neutralen Liganden durch Messung von 13C-chemischen Verschiebungen und Spin-Gitter-Relaxationszeiten

Investigation of the complexing of Na⁺, K⁺, Ca²⁺ and Ba²⁺ with some uncharged ligands by ¹³C-chemical shift and spin-lattice relaxation time measurements The influence of Na⁺, K⁺, Ca²⁺ and Ba²⁺ ions on ¹³C chemical shifts and on spin-lattice relaxation times of some electrically neutral ion carriers was investigated. In the solvents CD₃CN and CD₃OD and in presence of an excess of metal ions ligand 4 (see the Scheme) forms complexes of 1:1 stoichiometry. All four oxygen atoms of the ligand as well as solvent molecules take part in the coordination. In CDCl₃ as solvent, for all ions investigated except sodium, only 1:2 complexes (metal/ligand) were observed with 4 . Sodium ions form both 1:1 and 1:2 complexes in this solvent. In the 1:2 complexes of the investigated monovalent ions only one, in those of the divalent ions both amide carbonyl groups of ligand 4 take part in the coordination.     

Alkaline Earth Metal Zirconate Perovskites MZrO3 (M=Ba2+, Sr2+, Ca2+) Derived from Molecular Precursors and Doped with Eu3+ Ions

The effect of alkaline earth metal alkoxides on the protonation of zirconocene dichloride was investigated. This approach enabled the design of compounds with preset molecular structures for generating high‐purity binary metal oxide perovskites MZrO₃ (M=Ba²⁺, Sr²⁺, Ca²⁺). Single‐source molecular precursors [Ba₄Zr₂(μ₆‐O)(μ₃,η²‐OR)₈(OR)₂(η²‐HOR)₂(HOR)₂Cl₄], [Sr₄Zr₂(μ₆‐O)(μ₃,η²‐OR)₈(OR)₂(HOR)₄Cl₄], [Ca₄Zr₂(μ₆‐O)(μ₃,η²‐OR)₈(OR)₂Cl₄], and [Ca₆Zr₂(μ₂,η²‐OR)₁₂(μ‐Cl)₂(η²‐HOR)₄Cl₆] ? 8 CH₂Cl₂ were prepared via elimination of the cyclopentadienyl ring from Cp₂ZrCl₂ as CpH in the presence of M(OR)₂ and alcohol ROH (ROH=CH₃OCH₂CH₂OH) as a source of protons. The resulting complexes were characterized by elemental analysis, IR and NMR spectroscopy, and single‐crystal X‐ray diffraction. The compounds were then thermally decomposed to MCl₂/MZrO₃ mixtures. Leaching of MCl₂ from the raw powder with deionized water produced highly pure perovskite‐like oxide particles of 40–80 nm in size. Luminescence studies on Eu³⁺‐doped MZrO₃ revealed that the perovskites are attractive host lattices for potential applications in display technology.     

Synthesis,Persistent Luminescence,and Thermoluminescence Properties of Yellow Sr3SiO5:Eu2+,RE3+ (RE=Ce,Nd, Dy,Ho, Er,Tm, Yb) and Orange‐Red Sr3−xBaxSiO5:Eu2+, Dy3+ Phosphor

Sunlight‐excitable orange or red persistent oxide phosphors with excellent performance are still in great need. Herein, an intense orange‐red Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ persistent luminescence phosphor was successfully developed by a two‐step design strategy. The XRD patterns, photoluminescence excitation and emission spectra, and the thermoluminescence spectra were investigated in detail. By adding non‐equivalent trivalent rare earth co‐dopants to introduce foreign trapping centers, the persistent luminescence performance of Eu²⁺ in Sr₃SiO₅ was significantly modified. The yellow persistent emission intensity of Eu²⁺ was greatly enhanced by a factor of 4.5 in Sr₃SiO₅:Eu²⁺,Nd³⁺ compared with the previously reported Sr₃SiO₅:Eu²⁺, Dy³⁺. Furthermore, Sr ions were replaced with equivalent Ba to give Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ phosphor, which shows yellow‐to‐orange‐red tunable persistent emissions from λ=570 to 591 nm as x is increased from 0 to 0.6. Additionally, the persistent emission intensity of Eu²⁺ is significantly improved by a factor of 2.7 in Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ (x=0.2) compared with Sr₃SiO₅:Eu²⁺,Dy³⁺. A possible mechanism for enhanced and tunable persistent luminescence behavior of Eu²⁺ in Sr_3?xBa_xSiO₅:Eu²⁺,RE³⁺ (RE=rare earth) is also proposed and discussed.     

Sr3(BS3)2 und Sr3(B3S6)2: Zwei neue nicht‐oxidische Chalkogenoborate mit trigonal‐planar koordiniertem Bor

Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂: Two Novel Non‐oxidic Chalcogenoborates with Boron in a Trigonal‐Planar Coordination The thioborates Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂ were prepared from strontium sulfide, amorphous boron and sulfur in solid state reactions at a temperature of 1123 K. In a systematic study on the structural cation influence on this type of ternary compounds, the crystal structures were determined by single crystal X‐ray diffraction. Sr₃(BS₃)₂ crystallizes in the monoclinic spacegroup C2/c (No. 15) with a = 10.187(4) Å, b = 6.610(2) Å, c = 15.411(7) Å, β = 102.24(3)° and Z = 4. The crystal structure of Sr₃(B₃S₆)₂ is trigonal, spacegroup R3¯ (Nr. 148), with a = 8.605(1) Å, c = 21.542(4) Å and Z = 3. Sr₃(BS₃)₂ contains isolated [BS₃]^3— anions with boron in a trigonal‐planar coordination. The strontium cations are found between the layers of orthothioborate anions. Sr₃(B₃S₆)₂ consists of cyclic [B₃S₆]^3— anions and strontium cations, respectively.     

Investigation on the upconversion luminescence of Sr3AlO4F:Yb3+, Er3+, Ho3+ phosphors

To develop new emission-tunable upconversion (UC) phosphors, the Sr₃AlO₄F:5%Yb³⁺, xEr³⁺, yHo³⁺ (0 ≤ x ≤ 1%, 0 ≤ y ≤ 1%) samples were prepared by conversional solid-state reaction method, and their luminescence properties upon 980 nm excitation were studied. Upon 980 nm excitation, Yb³⁺-Er³⁺ codoped Sr₃AlO₄F shows a predominant emission peak between 645 and 700 nm which is attributed to the ⁴F_9/2-⁴I_15/2 transition of Er³⁺, and the Er³⁺ green emissions have been almost quenched. In this case, the yellowish green emitting light is obtained. The possible reason was interpreted by the energy level diagram and the proposed UC mechanism. For Yb³⁺-Ho³⁺ codoped Sr₃AlO₄F, three emissions are observed obviously which are all derived from the Ho³⁺ ion. The corresponding chromaticity coordinates indicate a red emission has been gained. To realize the tunable emission, the typical Sr₃AlO₄F:5%Yb³⁺, 0.2%Er³⁺, 1%Ho³⁺ phosphor was developed, and its emission spectrum includes the emission peaks of both Er³⁺ and Ho³⁺. Correspondingly, the sample gives a yellow emission.     

Itinerant electron ferromagnetism in Sr2+-, Ca2+-, and Ba2+-doped rare-earth orthocobaltites (Ln3+1−xM2+xCoO3)

Electronic and magnetic properties of Ln_1?xSr_xCoO₃ (Ln = Pr, Nd, Sm, Eu, and Gd) systems show that above a critical value of x, the d electrons become itinerant while the materials become ferromagnetic at low temperatures. The ferromagnetic component increases with increase in x and decrease in temperature. The Curie temperature increases with x and decreases with decrease in the size of the rare-earth ion. Incorporation of Ba²⁺ in LaCoO₃ favors itinerant electron ferromagnetism relative to Sr²⁺ while Ca²⁺ is less favorable than Sr²⁺.     

Selective separation of strontium by multitopic ion‐pair receptor: A DFT exploration

Selective extraction of a radionuclide in the presence of other interfering ions is one of the vital steps in the back‐end‐of‐the‐nuclear fuel cycle. The presence of interfering cations (such as Ca²⁺) in the radioactive waste and involvement of multiple separation steps are known to be bottlenecks in the efficient Sr²⁺ extraction. Here, using free energy corrected density functional theory, we have proposed a two‐step Sr²⁺ extraction methodology in nitrate media in the presence of interfering Ca²⁺ ion using a multitopic ion‐pair receptor, which was earlier reported to be strongly selective for K⁺ (Kim et al. J. Am. Chem. Soc. 2012, 134 , 1782–1792). To depict the correct free energy trend in the proposed extraction processes, the most probable binding mode of the metal (Sr²⁺, Ca²⁺, and K⁺) nitrates in the host are identified. In excellent agreement with the previously reported experiment, Crown/Pyrrole (C/P) binding is noted to be the most preferable mode for KNO₃, where K⁺ and occupied the Crown (C) and Pyrrole (P) site, respectively. However, the divalent metal ions (Ca²⁺ and Sr²⁺) are noted to marginally prefer Crown/Crown‐Pyrrole (C/CP) mode, in which metal reside at the C site while two nitrates occupy the P site and also simultaneously bind at the outer sphere of C site to coordinate with the metal via monodentate motif. Based on the free energy of extraction, we predict that the selective separation of chemically alike Ca²⁺/Sr²⁺ pair is indeed achievable using this receptor. We propose that once [Sr(NO₃)₂] is extracted in organic media, the receptor's high affinity toward K⁺ in nitrate media can be used to back strip Sr²⁺ to the aqueous phase.     

Adsorption of UO2 2+, Tl+, Pb2+, Ra2+ and Ac3+ onto polyacrylamide-bentonite composite

Composite of polyacrylamide-bentonite (PAA-B) was prepared by direct polymerization in a suspension of bentonite (B), the composite was then modified by phytic acid (PAA-B-Phy). The parameters related to adsorption of UO₂ ²⁺ in absence and presence of 0.01M CaCl₂ and of natural radionuclides (Tl⁺, Pb²⁺, Ra²⁺ and Ac³⁺ in a leaching solution) onto PAA-B and PAA-B-Phy, and thermodynamics of the adsorption were investigated. Adsorption isotherms were of L and H types for the adsorption of UO₂ ²⁺ onto PAA-B and PAA-B-Phy, whilst for Tl⁺, Pb²⁺, Ra²⁺ and Ac³⁺ they were of C type for both adsorbents. Langmuir equilibrium constants for the adsorption of all studied ions onto PAA-B-Phy were significantly higher than those found for PAA-B. The thermodynamic parameters indicated that adsorption reactions are spontaneous in terms of adsorption free enthalpy. The composite of PAA-B and its modification by Phy have been used for the first time in this study. It is concluded that the composites can be practically used for adsorption and applied as adsorbent of radionuclides.